Full version 10.4 install

I am installing a full version OS10.4 on to my imac whenever it gets here, it's the first flat panel imac that came out, anyway because it is full version and not an upgrade do I still need to install the 10.1 and the 10.3 that came with this imac first or can I do just the 10.4 install? Also maybe this is not the forum to ask on but I have Photoshop 6.0 and Illustrator 9.0 which is why I have the imac with OS 9.2 can I use OS10.4 with these or do I have to re-install OS9.2? Thank you,

I would certainly do the simple upgrade install on the iBook.
You repair permissions by using Disk Utility. It is found by going to the Applications folder then to the Utilities folder. Open Disk Utility and then single click on "Macintosh HD" in the left hand panel. Then select "First Aid" from the tabs in the main section of the window. Click on the "Repair Disk Permissions" button at the bottom and that starts the repair. Don't waste time and click "Verify", just go straight to "Repair...".
Be sure to reread my answer above about using Disk Utility from your install disk to run the "Repair Disk" function. This is different from repairing permissions and requires that you boot the Mac from the CD/DVD as I stated.
Your iTunes stuff is found in this location: Home Folder > Music > iTunes
I've never actually transferred iTunes from one Mac to another myself, so you might want to read up on it in iTunes Help.
Disk Utility is usually all that is needed except for certain problems. There is another utility called Disk Warrior that is sometimes needed to repair problems with the directory.
Regards,
Steve M.

Similar Messages

Is there a way to find out, whether the student or the full version is currently installed?

Hi everyone!
First of all: Merry Christmas!
A longer text with some background information is following. My question will be at the bottom.
My computer is a good boy and it didn't disappoint me for quite a while now.
I had once installed the student version (german) of CS3 extended on this one.
Then, after having removed the student version some time later when needed, I have re-installed the full version.
This time, however, it was in english and it wasn't the extended version either.
After the software has accepted my serial id, I was quite content. It felt much better in english and I was able to use photoshop to the fullest once again.
Today, I have gotten my hands on the upgrade version to CS5 (again in english and not extended, but that's all I need).
After the installation guide has told me, that there are no programmes installed which are compatible to the upgrade, I was confused.
I have realised that my current CS3 version was still the extended one, even though it was in english and it wasn't the student version either (at least, that's what I believe, because there were no "activate"/"deactivate" buttons in the help menu where it used to be in the german student version before).
So while doing an upgrade to CS5, I had to chose CS3 extended from the list and had to type in the old student's version serial number.
Nothing else worked, even though I've tried to chose the CS3 version in combination with the other serial number, which belong to the full version both.
Now to my question:
Is there a way to find out, whether the student or the full version is currently installed?
(Other than looking at the box of course, that would be quite trivial. I am worried if the installation guide hasn't removed all components thoroughly.)
Thanks in advance,
Happy holidays,
Jeff

Thanks for the reply!
That's what I thought as well. However, that wasn't the case. Whether it's the educational or the full version, both splash screens looked the same.
At least for the CS3 version.I know how I was quite confused about that in the past when I'd realised that.
The CS5 splash screen didn't say anything about a student version, but I was able to deactivate the application. I thought this was possible for the student version only.
I've tried using the adobe clean program like suggested, but that didn't work either. The installation guide of CS5 still didn't bother asking for an older version.
I.e.: It still used the educational serial number from before.
After reinstalling windows on my pc, the installation guide finally wanted to know about my CS3 again.
However, it told me, that the serial number of the full version in combination with CS3 is not valid. Just like it did before.
Maybe it's because the full version was made in the USA and the CS5 upgrade version was made in Austria - Ireland?
That would be really frustrating.

Lightroom 5 full version does not install [added: on Vista]

Hi, I have downloaded (3 times!) the full version of LR5. The .exe file I get (same name and size every time) will not run. Double clicking on it generates some hard disk activity for a while and then nothing. I installed and ran the beta version of LR5 with no problem at all but then this was a .zip file not a .exe and Stuffit extracted it perfectly. I am using Vista with latest updates, I am the admin on the computer (yes, i have checked this), I have rebooted, I have uninstalled the beta version, but still no useful action from the .exe Very frustrating as the beta has expired and I have paid for the full version but am "dead in the water". This is the first significant install issue I have ever had on this PC - which isn't great from a brand like Adobe. Can anyone offer any suggestions. I did note a previous similar question on LR4 but I have already tried the suggested answer (reboot, log on as admin and so on...).

I installed and ran the beta version of LR5 with no problem at all
I am using Vista with latest updates,
Are you aware that although the LR5 Beta ran on Vista, the LR5 final version does not?
This has caught some beta testers out. A classic example of caveat emptor.
http://forums.adobe.com/message/5465662
LR5 (final shipping version) requires Windows 7 SP1 or Windows 8.
http://www.adobe.com/products/photoshop-lightroom/tech-specs.html

Know if trial or full version has been installed

Hi, so i have just got a brand new Mac with Yosemite 10.10.3. I have just downloaded and installed the latest Creative Cloud Apps manager, and logged in with my paid subscription. When I clicked on my Apps tab, I saw all of my apps there, but instead of buttons to let me install, only buttons to let me try instead. This was a pain, restarting the computer, logging in and out of Apps manager a few times and suddenly they showed as install. But how can I be sure that all my apps have been installed in full mode, and not trial?
Is there somewhere in each of them that will tell me if the app is in trial or full mode? I don't want them all to stop working after 30 days as that will cause me a lot of heartache.

Hi Adam,
You can follow the article: Sign in, activation, or connection errors | CS5.5 and later, Acrobat DC to get your activation issues resolved.
Let us know if it works or not.
Thanks,
Ratandeep Arora

I have Adobe Acrobat X, the newest full version. After installing Firefox 4.0 I cannot anymore print using the Adobe pdf converter. Is there a fix for this?

When using print command from either Firefox or within an internet page open, Firefox/Acrobat are not able to print anything. All such print jobs need to be cancelled manually and Firefox locks and in a few cases I have to restart the computer. I am running Windows 7.

Yes - there is a fix... called IE9... http://windows.microsoft.com/en-US/internet-explorer/downloads/ie-9/worldwide-languages

Full version of Apex vs. Runtime general question

Hello,
We have three environments, Dev, Test and Production. We have the full version of Apex installed under Dev and have developed an application. Our site is behind firewall and only internal users with Oracle user_id will have access into Apex application(s). Oracle recommends to install the runtime version of Apex on Test and Prod. But as I gathered reading some posts and replies in Apex Forum noticed it is quiet of task moving developed applications from Dev to runtime environment.
Would it make more sense for our environment to install the full version of Apex into our Test and Prod? If not is there any good documentation around that I can access of how to do this?
Thanks so very much for any info
Regards
ahmadii

Last time I checked, that page did link to full installers. The format of the links for Windows was:
https://download.mozilla''.''org/?product=firefox-'''36.0.4-SSL'''&os=win&lang=en-US
I have bolded the part that currently says '''stub'''. Hand-crafted links in that form still work (but I have broken the link in this post with my formatting).
I don't have personal knowledge of what's going on with the "all" download page and hope it changes back.
As for blaming this forum for anything having to do with the "all" download page, you must be kidding. That page was always available from the main page using a link that said Systems & Languages and as the link says, it lists all the available systems and languages.

Snowleopard upgrade and full version

I have macbook with leopard. I want to upgrade it into snowleopard. But I found 2 types of dvd, upgrade version and full version. What is the differences and advantages between full and upgrade? If I buy the full version, could I install it in my mac(leopard)? Because I found more easily the mac box set (full version) that is cheap.
Thanks

The 10.6.3 white retail disk (so called "upgrade disk") sold online at Apple are full version disk of OS X Snow Leopard, however it also has a upgrade installer for OS X versions 10.4 and 10.5.
So if you boot the Mac into 10.4/10.5 and stick the DVD in and double click the upgrader, it will replace 10.4/10.5 with 10.6.3 and leave your programs and files alone.
If you stick the same disk in and boot the machine while holding c or option/alt key down (wired/built in keyboard) you get the opportunity to use Disk Utility (and others) and can erase the entire drive and then install OS X 10.6.3 Snow Leopard fresh. However this disk is sans-free iLife, but can be reinstalled via the 10.5 machine disks.
I don't know the specifics of the full version of the Snow Leopard install disks as I never used them, or what particular advantage they have (free iLife?), but if it requires a erase and install, then that's a disadvantage obviously as you can't carry over your already installed 10.5 programs.
OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
How to erase and install Snow Leopard 10.6
Restoring your Free iLife (iPhoto, iMovie etc)

Can I call .m files from a LabVIEW executable without the full development version of matlab installed?

I have an executable that I am trying to build (and distribute). Right now, it has Matlab script nodes that call some matlab .m scripts that someone else wrote. The target PC will not have the full development version of Matlab installed. Would that work? I have tried to compile the .m scripts into a DLL, but I can't import that to LabVIEW because of the special Matlab types (*mxArrays). I have also tried to write a wrapper around that DLL, but with no success. So now I'm wondering if I can either call the Matlab .m scripts directly from a Matlab Script node OR if I can call my Matlab DLL from within a script node. OR any other idea someone might have...
Thanks a lot!
-Matt Bradley
************ kudos always appreciated, but only when deserved **************************

Simon,
I looked at MathScript and am considering using it, but one thing that is not clear to me is if I will be able to use my .m files like I can with Matlab. I call the same Matlab script repeatedly and it keeps track of some information in global variables (for example, the number of consecutive detections). Can I do that entirely within mathscript or would I have to reload all of the info each time -- if I had to do that, it would mean substantial changes to the .m files ... and that's not an option.
-Matt
-Matt Bradley
************ kudos always appreciated, but only when deserved **************************

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

Error 1402 | Error 1406 | Acrobat, Reader

No AVCHD support for me! :-( on 4.2 or 4.1 why??? full version installed!

Hi Guys
I have two issues
One I don't have AVCHD support and yes I have a full version but do have the new AVC-Intra support.
Two Whenever I import .avi files they seem to play much faster than the audio. This second problem would not matter as much if I could get my AVCHD data into the sytem without it saying file not supported,
Any ideas?

Here's what you have to do:
Uninstall the entire CS4 suite.
Download the CS4 Clean Script and run it at least 2 times, rebooting between each run.
Install the CS4 suite from your original installation discs.
Update the software.
That you have no AVCHD presets indicates a smurfed installation, either from installing updates or from uninstalling older suite app version. A complete uninstallation, running of the clean script, and re-installation and update is the only sure way to get everything back to normal.
-Jeff

Receiving non system disk error when trying to install Windows 8.1 full version on Mac Mini

I am trying to install Windows 8.1 full version on a Late 2012 Mac Mini using OS X 10.9.2 using boot camp.
The windows partion has been created but when the mac mini reboots I receive a Non System Disk error. Press any key to continue
Please could someone assist with my problem

Thanks for that information, I removed all the external devices except the Superdrive.
Ran Boot camp again, created the MS Dos partition, and the mac restarted.
Now I have received the "No bootable device -- insert boot disk and press any key"
Please help

Do I need to install CS4 full version before installing CS5 upgrade?

New hard drive in iMac. I have a full version of CS4 design premium and an upgrade version of CS5. Do I have to install both? Or can I just install CS5 upgrade and somehow use my CS4 full serial number to validate the CS5?

You have the right idea. You do not have to install CS4. At some point during installation of CS5 you will be required to enter the serial number for CS4 in order to confirm it as a valid upgrade installation

HT4410 I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7

Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple

It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly.

Problems with Install: Full Version / Full - JDK

It's been a long day but ...
Trying to install both the full version and full -JDK. Both extracts contain several duplicate file versions some with same date/time, others different file sizes and date/time stamps.
The creation of the folder: sqldeveloper per the Install Instructions below doesn't happen:
Unzipping the SQL Developer kit causes a folder named sqldeveloper to be created under the <sqldeveloper_install> folder (for example, C:\Program Files\sqldeveloper). It also causes many files and folders to be placed in and under that directory.
I get a little wild and run sqldeveloper.exe from the extract <sqldeveloper_install> folder (since the other one didn't get created) and all I get is a flash of a DOS window like something is trying to work.
Help?
Thank you in advance!

First of all, even on windows you only need one download - the 65MB one if you don't have an existing JDK 1.5 install or the 38MB one if you do (if you are unsure, I would suggest the larger option). It is a bit worrying that there are "matching" files in both with different sizes/timestamps but so long as you stick to a single zip file, that shouldn't matter.
I would suggest that you blow away your existing <sqldeveloper_install> folder and start again with either the SQL Developer including JDK 1.5 (65MB) or the SQL Developer without JDK 1.5 (38MB), whichever is appropriate for you.
Given the structure of the zip file contents, if you want your <sqldeveloper_install> folder to be C:\Program Files\sqldeveloper, extract the zip file to C:\Program Files (if you extract to C:\Program Files\sqldeveloper, your install folder ends up being C:\Program Files\sqldeveloper\sqldeveloper).
Then, as you tried previously, the <sqldeveloper_install>\sqldeveloper.exe should start SQL Developer.

Installing a full version of Photoshop 6 on new iMac running SnowLeopard

I currently use a PowerPC G5 running OS 10.5.8. The G5 uses the old processors and Photoshop CS5 upgrade won't load because Photoshop CS5 only runs on the new Intel processors. My question: If I buy a new iMac with the Intel processors, is there a way to install a full version of Photoshop 6, and upgrade for Photoshop 7, CS, CS2, CS3, CS4, CS5? When my daughter tried this approach, and tried to install the full version of CS 6, she received the message Classic OS was not installed so that ended the attempt. Do I have to buy a full version Photoshop CS5 for the new iMac? Thanks for any help, Doug

Another, often cheaper, route to upgrade is to find an older version upgrade and do a two step upgrade since you are out of the Adobe window.
You may be able to find a CS3 upgrade, buy that. Then purchase the CS5 upgrade.
http://www.amazon.com/Adobe-Photoshop-CS5-Upgrade-Mac/dp/B003B32B14/ref=sr_1_1?ie=UTF8&qid =1294166832&sr=8-1
This route would still cost $400. But that is still a couple hundred dollars less than buying a full version of CS5 outright.
Just because Adobe stops selling older version upgrades, it doesn't mean all retailers stop selling them.

Full version 10.4 install

Similar Messages

Maybe you are looking for