Full width blade-Q
Hi, Cisco Folks:
Can someone please help me to clarify the following doubts?
Q1. What is the pinning order of B250-M1 to IOM if I have 2 Server Ports with a fully populated chassis of 4 B250-M1?
I know that for a half-width, the pinning order will look like:
Pinned Blade #
Server Link 1 or Port 1 of IOM Blade 1,3,5, 7
Server Link 2 or Port 2 of IOM Blade 2,4,6, & 8
OR
Pinned Blade #
Server Link 1 or Port 1 of IOM Blade 1,3,5, 7
Server Link 2 or Port 2 of IOM Blade 2,4,6, & 8
Q1.1
If I have the Server Link 1 connects to Port 1 of IOM, but Server Link 2 connects to Port 3 of IOM, will this change the pinning order?
Q1.2
If I have the Server Link 1 connects to Port 1 of IOM, but Server Link 2 connects to Port 4 of IOM, will this change the pinning order?
How about other combinations Like Port 2 of IOM (Sever Link 1) and Port 3 of IOM (Server Link 2)?
Q2. If I only install a Single M81KR in B250-M1, do I have to care about which Adapter Slot to install my PALO Card? My concern here is really Slot 1 is tied to IOM A and Slot B is tied to IOM B, is there such concept at all??
If there is such concept, then I would make sure that for a 4 blades setup, I would have 2 blades with PALO inserted into Slot 1 and the other 2 blades with PALO inserted into Slot 2,
Thanks.
SiM
./Abhinav
Let me try out once I have the opportunity and update you.
I am beginning to understnad more now esp. with your deep technical expertise. I appreciate your input.
1 more question lingering on my mind:
If I have only 1 PALO installed in one of the 2 Mezzanine Slots of a Full-Width Blade, AM I really using only 1 Server Link at all assuming I have 2 Server Links i.e. I made use of 2 FEX Ports?
Example: B250-M2
2 Server Links Per IOM/FEX to Each FI
My full Width blade is in Slot 1 & 2 or the TOP of the Chassis.
For half-width, I know it is very clear as in:
2-Server Link Blade (Assuming I have 8 blades)
Server Link 1 1, 3, 5, 7 - Blade 1,3,5 & 7 will make use of this 10G link only
Server Link 2 2, 4, 6, 8
4-Server Link Blade (Assuming I have 8 blades)
Server Link 1 1, 5 - Blade 1 & 5 will make use of this 10G link only
Server Link 2 2, 6,
Server Link 3 3, 7
Server Link 4 4, 8
Please help me to explain further as I know Cisco blades, but there is a lot I need to learn everyday.
Appreciate it.
KP
Similar Messages
-
Hi Guys,
I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out as this web-site has been payed for by my client.
AlexMany thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
How can I create an adaptable full-width site with sliding parallax panel?
Hi guys!
I have to create a web site with a full-width resolution, adaptable with any monitor and resolution using some panels that moves using the parallax scroll-motion with a sliding effects.
For example I nedd a site like "collecdiv.com" that works with the same effects and with an adaptable full-widht size page.
Here's some screen I take of my site with a 22" 1920x1080 resolution and a 15" 1280x1024.
The 4 tab I want to see in full width and in scroll motion parallax: four with a resolution of 22" and the other four with a resolution of 15" (the screen are made with paint to let you see what is the problem)
In the first tab there's a slideshow widget with some photo, in the other tabs there's a rectangular form with an image fill... I have to see the same layout that I see in my 22" monitor, in other smaller or bigger monitor (like 15") just like in the "collecdiv.com" website... The Dimension of my muse file is 960px width
How can i resolve the problem? How can I fix the screen so anyone else can see my site without problem and with all the resolution?
Who can help me? PLEASE
Thanks in advice
Francesco
P.S.: an advise... check the site "www.collecdiv.com" to see what I neddI'm adding this screenshot so you can understand the problem... The 4 tab I want to see in full width and in scroll motion parallax: four with a resolution of 22" and the other four with a resolution of 15" (the screen are made with paint to let you see what is the problem)
In the first tab there's a slideshow widget with some photo, in the other tabs there's a rectangular form with an image fill... I have to see the same layout that I see in my 22" monitor, in other smaller or bigger monitor (like 15") just like in the "collecdiv.com" website... The Dimension of my muse file is 960px width
Pleas help me -
How do I create a Full Width Photo for a Liquid Layout - CS3
Greetings & Help!
I'm trying to create a full width photo layout without the
photo's being tall.
Exactly as the following websites - which all seem to be
using the same size of photo or very close to it.
This site is static with full width photos that are not tall.
http://www.jenniferhandyproperties.com/selling
This site is static for the most part and full width photos
that are not tall
http://www.gnvpartners.com/web/
This site is Flash with full width photos that are not tall.
expodesigncenter
I would love to create a flash site just like expo but at
this point I would settle for a static photo with the same size
being the same on each page.
Also I would like my site to be a liquid layout so the photo
and everything else (text, Links etc) on the page flows correctly.
The problem...
I'm trying to use photo's from Istockphoto.com. The size of
the photo's they offer are
425 x 282 px (5.9" x 3.9")
849 x 565 px (11.8" x 7.8")
1698 x 1131 px (5.7" x 3.8")
I'm selecting horizontal photo's. I do not know how to match
the same width, height and appearence as the websites I mentioned
above.
If I choose a photo that fits the width then the length is
too long. Also if I choose a large photo and have to crop it then
most of the detail of the photo is lost.
I'm attempting to create a mock-up for my web in Fireworks
CS3 and after search Adobe and www I came across the mock up should
be 1004px which would end up being 1024 with vertical scroll bar
and small margins.
I also have Photoshop & Flash CS3 but should mention (if
you haven't already guess it by now) I am a rookie when it comes to
creating a website.
So if you can offer a solution in "Non-Tech Terms" I would
appreciate it.
Thank you in advance for your time.Greetings & Help!
I'm trying to create a full width photo layout without the
photo's being tall.
Exactly as the following websites - which all seem to be
using the same size of photo or very close to it.
This site is static with full width photos that are not tall.
http://www.jenniferhandyproperties.com/selling
This site is static for the most part and full width photos
that are not tall
http://www.gnvpartners.com/web/
This site is Flash with full width photos that are not tall.
expodesigncenter
I would love to create a flash site just like expo but at
this point I would settle for a static photo with the same size
being the same on each page.
Also I would like my site to be a liquid layout so the photo
and everything else (text, Links etc) on the page flows correctly.
The problem...
I'm trying to use photo's from Istockphoto.com. The size of
the photo's they offer are
425 x 282 px (5.9" x 3.9")
849 x 565 px (11.8" x 7.8")
1698 x 1131 px (5.7" x 3.8")
I'm selecting horizontal photo's. I do not know how to match
the same width, height and appearence as the websites I mentioned
above.
If I choose a photo that fits the width then the length is
too long. Also if I choose a large photo and have to crop it then
most of the detail of the photo is lost.
I'm attempting to create a mock-up for my web in Fireworks
CS3 and after search Adobe and www I came across the mock up should
be 1004px which would end up being 1024 with vertical scroll bar
and small margins.
I also have Photoshop & Flash CS3 but should mention (if
you haven't already guess it by now) I am a rookie when it comes to
creating a website.
So if you can offer a solution in "Non-Tech Terms" I would
appreciate it.
Thank you in advance for your time. -
How can I get a header image to span full width of page?
Hi All
I have tried just about every thing to get this image to span the full width of the page, its fine in design mode but when I view it in preview its centred with white space either side.Hi Brad
Thanks for your reply, I have treied that also with similar results. -
How do I create a web mock-up using Full Width Photo's
Greetings & Help!
I'm trying to create a full width photo layout using
Fireworks CS3 & Dreamwaver CS3 without the photo's being tall.
Exactly as the following websites - which all seem to be
using the same size of photo or very close to it.
This site is static with full width photos that are not tall.
http://www.jenniferhandyproperties.com/selling
This site is static for the most part and full width photos
that are not tall
http://www.gnvpartners.com/web/
This site is Flash with full width photos that are not tall.
expodesigncenter
I would love to create a flash site just like expo but at
this point I would settle for a static photo with the same size
being the same on each page.
Also I would like my site to be a liquid layout so the photo
and everything else (text, Links etc) on the page flows correctly.
The problem...
I'm trying to use photo's from Istockphoto.com. The size of
the photo's they offer are
425 x 282 px (5.9" x 3.9")
849 x 565 px (11.8" x 7.8")
1698 x 1131 px (5.7" x 3.8")
I'm selecting horizontal photo's. I do not know how to match
the same width, height and appearence as the websites I mentioned
above.
If I choose a photo that fits the width then the length is
too long. Also if I choose a large photo and have to crop it then
most of the detail of the photo is lost.
I'm attempting to create a mock-up for my web in Fireworks
CS3 and after search Adobe and www I came across the mock up should
be 1004px which would end up being 1024 with vertical scroll bar
and small margins.
I also have Photoshop & Flash CS3 but should mention (if
you haven't already guess it by now) I am a rookie when it comes to
creating a website.
So if you can offer a solution in "Non-Tech Terms" I would
appreciate it.
Thank you in advance for your time.Hi Pixlor -
I'll do my best to answer your questions - within my ability
- which isn't much.
As far as "Tile" the photo - I've checked out the responces
I've received from other's on this post - and other posts - and on
each page for the "masthead" I just want one photo to be the same
size of the page width wize - and the height of the photo should
not be tall from the top of the masthead to the bottom of the
masthead. As far as what I mean by "not being Tall" - see next
comment...
I'm just attempting to duplicate exactly (or very close to
it) the same appearence and dimensions - "Width = side-to-side,
Tall = Height - as the websites I mentioned in my first post here.
Also if you check out Joey's website (who responded to my
post as well) basicly he has created the same thing that I'm
shooting for except he is using graphics. I have to use photos in
my masthead which will be of kitchen cabinetry or construction
photo's and must highlight every detail down to the shine of the
kitchen cabinets knobs - or close to it.
Due to this I can not have the photos of the masthead "tile"
from "width-to-width or top-to-bottom because the deatils in the
photo can not repeat or multiply to completely fill the masthead
head. Otherwize if I choose a photo of kitchen cabinetry which
highlights a kitchen sink - and if I tile this photo - from what
I'm learning from everyones responce thus far - I'll end up with
several of the same kitchen sinks and cabinets in the same photo.
I must stress I could be wrong in what I described directly
above due to my lack of tech knowledge! If this post was about a
2x4 or 2x6 or Green Building or what have you, It would be heck of
alot easier for me to completely understand what you pro's are
trying to help me with - which I completely appreaciate. Expecially
someone like you who owns a monitor the size of one of my work
trucks!
Which brings me to your next question...
Liquid layout -
Yes I am trying to end up with a liquid layout for my website
using Dreamweaver CS3. Hopefully using one of the pre-built liquid
layouts in Dreamweaver and modify it within my ability.
The main reason why I would like to create a liquid layout is
because most others construction firms in my industry - and in my
target market - have websites that completely consume a viewers
monitor - viewport - screen real estate - (i'm trying to learn your
tech terms) no matter what size viewport a viewer has, or how the
viewer resizes theirs.
I've also heard that a "Min & Max" code can be included
in a liquid layout so that it would limit the "liquidness" of the
layout so "Text Lines" won't stretch too long making it difficult
to read when a viewport size extends - and when the viewport shinks
- all the elements (or Div's) will reflow an maintain order and
visability.
1004 -
The only reason why I mentioned designing the Fireworks CS3
mock-up at a 1004 is because someone else mentioned they design
their mock-ups at a "Canvas Size" of 1004. Then most browsers
automaticly inlclude a scroll bar if the vertical content exceeds
below "The Fold". Thus with the addition of the automatic scroll
bar the page now becomes 1024 - according to this person.
She went on to mention according to "recent studies" - 56% of
viewers have 1024 x 768 and most computer manufacturs shipp them
this way. Then the following stats... 22% at 800 x 600, then 13% at
1280 x 1024, then 3% at 1152 x 864, then 1% at 1580 x 1129. She
also mentions most avearge viewers (every day Dick & Jane, Bob
& Besty) (excluding computer tech folks like yourself) - do not
resize - bother with - or know how to resize their viewport.
My personal note on this is most of my target market -
clients - just turn on their computer and surfs the net from
website to website without changing their viewport and when also
asked they "Feel" that a website looks much better - or more
profeshional - when the content completely fills up an entire
viewport.
"Feel - not - Think" -
Keep in mind I choose the word "Feel" & not "Think". In
my target market - Residential Construction - 95% of home
improvement decisions are made my the Woman of the houshold - not
the Man. That being in mind it is a proven stat (and not a sexest
comment) that women base most of their choices or decsions on how
something makes them "Feel". Where as most men make their choice or
decision on how they "Think".
Also most men attempt to keep their women happy and knowing
that if they don't then they will end up in the doghouse - ( not a
fun place to be trust me on this) and in addition most men do not
have much of a clue when it comes to the interior design layout of
a home, matching of paint colors, appliance choices or what have
you.
Wow that was a major side track I took -
Back to 1004 -
It's not that I'm intend in designing the mock-up in
Fireworks at 1004 - I just want to end up wth a liquid layout so
when my site is viewed by "most people" then my site will
completely consume a viewers viewport - or very close to it.
If I need to design the mock-up less then 1004 - or more then
- and still be able to end up with the same end result in a liquid
form - so be it.
I don't know the best way to proceed -
I'm just attempting to learn from others who respond and for
the most part those who have been kind enough and taken the time to
respond seem to be very knowlegeable about my issue at hand.
You might find this hard to believe but I am learning quite a
bit from all of you and I really do appreaciate it.
Well now that this responce is as long as the novel "War
& Peace" - I'll close here.
Travis -
How do I create full width photos for a website with Photoshop - Fireworks - Dreamweaver CS3 ?
Greetings & Help!
I'm trying to create a full width photo layout using Photoshop or Fireworks CS3 and then end with Dreamwaver CS3 without the photo's being tall.
Exactly as the following websites - which all seem to be using the same size of photo or very close to it.
This site is static with full width photos that are not tall.
http://www.jenniferhandyproperties.com/selling
This site is static for the most part and full width photos that are not tall
http://www.gnvpartners.com/web/
This site is Flash with full width photos that are not tall.
expodesigncenter
I would love to create a flash site just like expo but at this point I would settle for a static photo with the same size being the same on each page.
Also I would like my site to be a liquid layout so the photo and everything else (text, Links etc) on the page flows correctly.
The problem...
I'm trying to use photo's from Istockphoto.com. The size of the photo's they offer are
425 x 282 px (5.9" x 3.9")
849 x 565 px (11.8" x 7.8")
1698 x 1131 px (5.7" x 3.8")
I'm selecting horizontal photo's. I do not know how to match the same width, height and appearence as the websites I mentioned above.
If I choose a photo that fits the width then the length is too long. Also if I choose a large photo and have to crop it then most of the detail of the photo is lost.
I'm attempting to create a mock-up for my web in Fireworks CS3 and after search Adobe and www I came across the mock up should be 1004px which would end up being 1024 with vertical scroll bar and small margins.
I also have Photoshop & Flash CS3 but should mention (if you haven't already guess it by now) I am a rookie when it comes to creating a website.
So if you can offer a solution in "Non-Tech Terms" I would appreciate it.
Thank you in advance for your time.In the second example, the photo is set to background with a tile. The other parts are over top of the photo and done with layers with a background color setting.
-
I just got a new Dell Optiplex computer with Windows 7. I installed Firefox 19 on it. The web pages come up narrow, with borders on each side. So the content of the screen is smaller than what I've gotten in the past with Firefox 3.6 on my previous computer. I did the Full Screen command, and that only made the screen taller rather than giving me a full screen (such as I get with the same web pages in Internet Explorer). I've also tried enlarging the text, but that throws off the format of the web page so some parts of it overlap.
What can I do to get a full screen, including full width?
There is a box below this Details box called "Troubleshooting Information" which says I should click Allow and then click Install. Since I don't know what would be installed on my computer, I did not do it.The Troubleshooting Information extension adds some useful information to your post, but in this case, I don't think it's really needed.
Zoom is your best bet. To make it work for you, I have two suggestions.
(1) Switch from "text only" zoom to "full page" zoom. This is proportional like in IE.
View menu > Zoom > ''uncheck'' Zoom Text Only
If you are using the compact menus with the orange Firefox button, tap the Alt key to display the full classic menu bar.
(2) Install an extension that can default your view to a higher zoom level automatically to save time when visiting new sites. Here are two candidates:
* [https://addons.mozilla.org/en-US/firefox/addon/default-fullzoom-level/ Default FullZoom Level]
* [https://addons.mozilla.org/en-US/firefox/addon/nosquint/ NoSquint]
With that combination, can you minimize your eyestrain? :-) -
Content in the page not displaying in full width
Hello everyone,
We have a EP 2004s SR1 Portal with customized framework page and display theme.
When logged on to the protal, the first page(say home page) was displaying by leaving some width at right of that page (approximately the width is equal to scroll bar width). For remaining pages this is not the case...it is displaying properly i.e displaying with full width covered.
and one more thing is, this is happending in Production and QA machines...For Development machine it is working fine.
Could any one help me in this...
Thanks in advance
Regards
Sunil ChiluveruIn your style.css on line 187 you have this. Remove the max-width.
.section > .content {
background-image: url('../images/frame/contentBg.png');
max-width: 800px;
padding: 4%;
text-align: justify;
color: #646462;
overflow: auto;
Nancy O. -
Using GridBagLayout to fill the full width of a JFrame, ...
I have two quick questions regarding GridBagLayout.
1st, I would like the fill the full width of a JFrame with a JPanel. I have tried:
JFrame frame = new JFrame();
//Set width and height of frame
JPanel panel = createFilledPanel();
panelConstraints.gridx = 0;
panelConstraints.gridy = 0;
panelConstraints.fill = GridBagConstraints.HORIZONTAL;But this fails to stretch the panel to the full width of the frame.
2nd, I would like to align the elements in a panel to the farthest left they can go. I have tried:
element.anchor = GridBagConstraints.LINE_START;But this aligns all the elements I do this to, to the same starting position horizontally, but not all the way left.
I would appreciate help with either or both of these questions!weightx or weighty : Easy way to understand is priority amongs components and if this componets get setting
with weightx = 1.0 then this components 's width and height values are respected to be kept over others.
It just says that, putting the weight on this components over others. kept all others attributes of this componets first
over other components.
I hope my jebrish explanation help - -
How can I make a part of the body of my content full width of the screen with a fluid grid layout in CSS? (In dreamweaver program)
and I know it is being over-ridden by
.gridContainer {
width: 88.5%;
max-width: 1232px;
padding-left: 0.75%;
padding-right: 0.75%;
margin: auto;
clear: none;
float: none;Abdelqader Alnobani wrote:
How can I make a part of the body of my content full width of the screen with a fluid grid layout in CSS? (In dreamweaver program)
and I know it is being over-ridden by
.gridContainer {
width: 88.5%;
max-width: 1232px;
padding-left: 0.75%;
padding-right: 0.75%;
margin: auto;
clear: none;
float: none;
Logically a structure something like below should work BUT whether or not it will upset the FG I don't know as I wouldn't ever use it.
<div class="gridContainer">
Top Code Section Goes Here
</div>
<!-- close gridContainer -->
<div id="fullWidth">
Full width section goes here
</div>
<!-- close fullWidth -->
<div class="gridContainer">
Bottom Code Section Goes Here
</div>
<!-- close gridContainer --> -
How can I create a full width composition
Hi All
I'm loving the new update and as usual this leads onto other things.
How can I create a full width (scalable) composition without a work around?
The new full width icon only seems to work with slideshows.
Thanks
PaulDid anyone ever figure this out or get an answer? I like how it works on this site:
LIVESTRONG.org
Click on the words and links in the pictures but it is full width. The full width option isn't available on a composition. -
Full legend in image slideshow full width
Hi Everyone,
I can't get a legend full width with a background color in the image full width ( Slideshow ) , could you help me please ?
Thanks
Message was edited by: zeek zeek@iamDK,
Thanks for the response. I am familiar with Pinning and Slideshow Widgets and have been using Muse since it's inception, what I don't understand after watching one of the videos in which Terry White mentions FullScreen or Browser Width using the Slideshow widget and as Jason Bibby at the top also mentions, I have not had any success using any of the SS Widgets again to acheive this effect. Pinning the SS Widget to the top of the Browser does just that and does not stretch images within it to fill the Browser Width even if you get inside the widget to expand an image so that it snaps to the edge of the Browser still does not do it regardless of weather its pinned or not.
I've had to jump into DW to get this done - in combination to using Fluid Grid, which I had rather not but so far so good, at least its responsive and not having to create twice in the case of Muse. I love Muse for its simplicity, being able to whip up pretty much any design in no time is sweet, but having a SS that stretches Browser width is a common trend and I'd like to see it integrated into Muse and if it can be done now as the video shows then how?
If you know how to do this in Muse could you please show us how?
Kind regards,
Kelvin -
Muse mobile site doesn't display full width
The mobile version of my site doesn't display full width. It doesn't scale to fit the mobile screen as the set up width in Muse.
I found a tip talking about add "viewport" code to muse site. When I insert the code to html window, it give me a box said "unable to generate a thumbnail"
If add the view port code is the solution, how do I add this code to the <head> tag on muse?
If not, what's the solution for this situation?One problem where this occurs is that there could be some object (s) outside the layout page size.
-
The mobile version of my Muse site doesn't display full width
Can anyone help me figure out how to make the mobile version of my site display full width? I've snapped everything to the full width using the blue lines, but the whole site is left justified. I reviewed the master page and everything seems to be in order.
You most likely have an empty box or text box that is off to the right in your design. Do a select all on your Master Pages and pages to see if you have any elements outside the right side of your design.
Maybe you are looking for
-
Working with Adobe Edge in Muse CC
Hi, I have just published a website to the Business Catalyst server via Muse for testing (link below) and noticed that the Edge animation i have included in the website doesnt work in Internet Explorer 8 as it doesnt support HTML5, do you have a work
-
Nano 3rd Gen. - Not working
Was working fine but after turning off and turning back on 15 minutes later it won't play anything anymore. All of the music and videos are there but the ipod freezes for a few minutes when I press the play button. The games are also not working and
-
RAR FILE, CLIENT_HOST
Hi, I try to rar data files for sending our clients,the code for one of the files, code is successfyll from command prompt, but not from the forms.This code gives no error, where is the mistake? CLIENT_HOST('cmd /c cd c:\5692_SARARMALATYA&&set path="
-
Just another question regarding impdp.exe process. Assume a table is dropped after the previous export (expdp.exe) operation (for full database) Now I perform a import (impdp.exe) operation. Is this table automatically created again? What about users
-
Hi all, I've set sharing in Mac side and selected user account for this purpose. From Win side, only GUEST account can be access but not allowed to write access the folder. The error from win side is that user/password not match. I've enabled the "sh