Full width caption boxes for lightboxes

Hello everyone - I am loving the new "Full width" button for lightboxes and images, BUT I can't seem to get the captions box to go full width, this means when i use a lovely opaque box over an image, it isnt going full width but the image is. Please see image example. Please help?????
Thank you in advance
forumnotifier Help with using Adobe Muse CC

Hi Jim
I just thought of something you may want to check. First,
press the Windows key (if you have a keyboard equipped with one of
these) and the letter D. The goal is to display the desktop. Then
right click and select Properties. Click the settings tab, followed
by the Advanced button and finally the General tab. Compare the
setting here between working and non-working PCs.
Hopefully this will help some... Rick

Similar Messages

Captivate 4: caption box size

I want to create 3 small boxes at the bottom of each screen. The boxes are for an "X" for exit, and a triangle pointing (1) left for "back" and (2) right for next.
When I create a caption box for the X it defaults to 57 wide as a minimum. Is there any way to reduce the size of the box to around 40 x 40 pixels?
Thanks

Hello,
Each type of Text Caption has a minimum size. You could edit one of those Text Caption definitions but I think it will be much easier if you use a rectangle because that will accept text as well (double click in the rectangle) and is much easier to resize.
Lilybiri

Default gutter width for drawing text boxes for overset text

I have master pages that were created with columns and the correct gutter width we want. When I drag a story from a window (a window that is part of our CMS) and place it on the page, the gutters between the text columns are correct -- p9 (or 0.125 inches). But if I draw a new text box or if I click the red plus to draw a text box for overset text, the gutter is a full pica (or 0.1667 inches).
I want any text box that is drawn on the page or any overset text box that is drawn to default to p9 for gutters.
I don't want to manually change the gutter for every new text box I draw.
I'm using ID with CS4.
Thank you.

The default gutter in a multi-column frame is set in the object style under Text Frame General Options. If you haven't defined any new styles you only need to edit the [Basic Text Frame] style. New frames will use the new gutter value when you add columns. If you have object styles for other text frames, you'll need to edit those, too. For existing frames, if the number of columns has been changed manually, you will need to reset the gutter.

Why can't the Accordian widget's drop down box span full width in mobile layout?

I'm trying to create a simple drop down navigation for mobile. When the entire header is clicked, it expands down to reveal a dynamic vertical menu, which will cover the page content below, not push it down.
I've taken an accordian widget and added a vertical navigation widget (to allow dynamic navigation) into the expanded area. When I preview it, the drop down box of the accordian widget doesn't span the full width of the site width (380px). It stops 5-10px short of the right edge, which is a small detail, but it annoys me, and is not how I have it set up in design view. There is no other content on the page, just this element. When I have elements extend off the page area, it somehow affects the amount of space the drop down area stops short from and adds more. Strange again. Kind of stumped as to if/how I can fix this.
Screenshot attached.

The code taht you have shown is not the template, it is a document that has been created from a template and renamed with a dwt extension.
If you load the document into DW then go to menu item Modify->Templates->Detach from Template and save the file, you will have your original template called index.dwt and located in the Templates subdirectory.

How do I create a Full Width Photo for a Liquid Layout - CS3

Greetings & Help!
I'm trying to create a full width photo layout without the
photo's being tall.
Exactly as the following websites - which all seem to be
using the same size of photo or very close to it.
This site is static with full width photos that are not tall.
http://www.jenniferhandyproperties.com/selling
This site is static for the most part and full width photos
that are not tall
http://www.gnvpartners.com/web/
This site is Flash with full width photos that are not tall.
expodesigncenter
I would love to create a flash site just like expo but at
this point I would settle for a static photo with the same size
being the same on each page.
Also I would like my site to be a liquid layout so the photo
and everything else (text, Links etc) on the page flows correctly.
The problem...
I'm trying to use photo's from Istockphoto.com. The size of
the photo's they offer are
425 x 282 px (5.9" x 3.9")
849 x 565 px (11.8" x 7.8")
1698 x 1131 px (5.7" x 3.8")
I'm selecting horizontal photo's. I do not know how to match
the same width, height and appearence as the websites I mentioned
above.
If I choose a photo that fits the width then the length is
too long. Also if I choose a large photo and have to crop it then
most of the detail of the photo is lost.
I'm attempting to create a mock-up for my web in Fireworks
CS3 and after search Adobe and www I came across the mock up should
be 1004px which would end up being 1024 with vertical scroll bar
and small margins.
I also have Photoshop & Flash CS3 but should mention (if
you haven't already guess it by now) I am a rookie when it comes to
creating a website.
So if you can offer a solution in "Non-Tech Terms" I would
appreciate it.
Thank you in advance for your time.

Greetings & Help!
I'm trying to create a full width photo layout without the
photo's being tall.
Exactly as the following websites - which all seem to be
using the same size of photo or very close to it.
This site is static with full width photos that are not tall.
http://www.jenniferhandyproperties.com/selling
This site is static for the most part and full width photos
that are not tall
http://www.gnvpartners.com/web/
This site is Flash with full width photos that are not tall.
expodesigncenter
I would love to create a flash site just like expo but at
this point I would settle for a static photo with the same size
being the same on each page.
Also I would like my site to be a liquid layout so the photo
and everything else (text, Links etc) on the page flows correctly.
The problem...
I'm trying to use photo's from Istockphoto.com. The size of
the photo's they offer are
425 x 282 px (5.9" x 3.9")
849 x 565 px (11.8" x 7.8")
1698 x 1131 px (5.7" x 3.8")
I'm selecting horizontal photo's. I do not know how to match
the same width, height and appearence as the websites I mentioned
above.
If I choose a photo that fits the width then the length is
too long. Also if I choose a large photo and have to crop it then
most of the detail of the photo is lost.
I'm attempting to create a mock-up for my web in Fireworks
CS3 and after search Adobe and www I came across the mock up should
be 1004px which would end up being 1024 with vertical scroll bar
and small margins.
I also have Photoshop & Flash CS3 but should mention (if
you haven't already guess it by now) I am a rookie when it comes to
creating a website.
So if you can offer a solution in "Non-Tech Terms" I would
appreciate it.
Thank you in advance for your time.

How do I create full width photos for a website with Photoshop - Fireworks - Dreamweaver CS3 ?

Greetings & Help!
I'm trying to create a full width photo layout using Photoshop or Fireworks CS3 and then end with Dreamwaver CS3 without the photo's being tall.
Exactly as the following websites - which all seem to be using the same size of photo or very close to it.
This site is static with full width photos that are not tall.
http://www.jenniferhandyproperties.com/selling
This site is static for the most part and full width photos that are not tall
http://www.gnvpartners.com/web/
This site is Flash with full width photos that are not tall.
expodesigncenter
I would love to create a flash site just like expo but at this point I would settle for a static photo with the same size being the same on each page.
Also I would like my site to be a liquid layout so the photo and everything else (text, Links etc) on the page flows correctly.
The problem...
I'm trying to use photo's from Istockphoto.com. The size of the photo's they offer are
425 x 282 px (5.9" x 3.9")
849 x 565 px (11.8" x 7.8")
1698 x 1131 px (5.7" x 3.8")
I'm selecting horizontal photo's. I do not know how to match the same width, height and appearence as the websites I mentioned above.
If I choose a photo that fits the width then the length is too long. Also if I choose a large photo and have to crop it then most of the detail of the photo is lost.
I'm attempting to create a mock-up for my web in Fireworks CS3 and after search Adobe and www I came across the mock up should be 1004px which would end up being 1024 with vertical scroll bar and small margins.
I also have Photoshop & Flash CS3 but should mention (if you haven't already guess it by now) I am a rookie when it comes to creating a website.
So if you can offer a solution in "Non-Tech Terms" I would appreciate it.
Thank you in advance for your time.

In the second example, the photo is set to background with a tile. The other parts are over top of the photo and done with layers with a background color setting.

I want to know why some box of Iphone5s it's not come full accessories in box simple my iPhone 5s I have bought from Apple store last week it's first time for me use iPhone but so surprise me how the company make the phone have to use a pin to open

I want to know why some box of Iphone5s it's not come full accessories in box simple my iPhone 5s I have bought from Apple store last week it's first time for me use iPhone but so surprise me how the company make the phone have to use a pin to open the sim but didn't give a pin inside the box and I ask staff at store their said they also don't know some box have some of are don't have a pin come together so then they told me I have to find solution or I have to buy a pin by my self I can buy it by myself but I really don't understand how come apple big company but how it's happen like this?thank you.

Where did you purchase this. The US phones do not come with the SIM removal tool anymore. They haven't for some time now. I'm not even sure it comes with any of the devices anymore. You can just straighten out a paper clip and do the same thing.

I have Firefox 19 and the screens are narrow. How can I get full width screens, like I get in IE? Full Screen command only makes my screens taller, not wider.

I just got a new Dell Optiplex computer with Windows 7. I installed Firefox 19 on it. The web pages come up narrow, with borders on each side. So the content of the screen is smaller than what I've gotten in the past with Firefox 3.6 on my previous computer. I did the Full Screen command, and that only made the screen taller rather than giving me a full screen (such as I get with the same web pages in Internet Explorer). I've also tried enlarging the text, but that throws off the format of the web page so some parts of it overlap.
What can I do to get a full screen, including full width?
There is a box below this Details box called "Troubleshooting Information" which says I should click Allow and then click Install. Since I don't know what would be installed on my computer, I did not do it.

The Troubleshooting Information extension adds some useful information to your post, but in this case, I don't think it's really needed.
Zoom is your best bet. To make it work for you, I have two suggestions.
(1) Switch from "text only" zoom to "full page" zoom. This is proportional like in IE.
View menu > Zoom > ''uncheck'' Zoom Text Only
If you are using the compact menus with the orange Firefox button, tap the Alt key to display the full classic menu bar.
(2) Install an extension that can default your view to a higher zoom level automatically to save time when visiting new sites. Here are two candidates:
* [https://addons.mozilla.org/en-US/firefox/addon/default-fullzoom-level/ Default FullZoom Level]
* [https://addons.mozilla.org/en-US/firefox/addon/nosquint/ NoSquint]
With that combination, can you minimize your eyestrain? :-)

Muse mobile site doesn't display full width

The mobile version of my site doesn't display full width. It doesn't scale to fit the mobile screen as the set up width in Muse.
I found a tip talking about add "viewport" code to muse site. When I insert the code to html window, it give me a box said "unable to generate a thumbnail"
If add the view port code is the solution, how do I add this code to the <head> tag on muse?
If not, what's the solution for this situation?

One problem where this occurs is that there could be some object (s) outside the layout page size.

Adobe Muse Footer not full width in preview mode?

Hi, I originally had my footer 100% width when previewing in browser and preview mode, and now for some reason it is not 100% width. Not sure what I have done for this to occur and it doesnt make it any easier when in design mode it is 100% width. Any help much appreciated.

Just answered my own question, bounding box was not quite out to full browser width. To ensure it goes out to the full width keep dragging across until the guides turn red. I must of bumped it when I went in the masters page to do something and it was out by just a bees dick! Unreal....2 hrs of my life I wont get back haha :-)
PS...Do I get 10 points for answering my own question? ;-)

I am creating box for two coloums in sap script

hi,
i am creating box for two coloums
when i am creating box for this two coloums this box is displaying from the top.
when i am decreasing this hight it is decreasing from the buttom of the window
i want to decrease from the top of window
can u explan plz
this requirement
plzz

see this:
BOX Command
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT, and FRAME, you must specify both a measurement and a unit of measurement. Specify the INTENSITY parameter as a percentage between 0 and 100.
XPOS, YPOS
Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
WIDTH
Width of the box. Default: WIDTH value of the SIZE command.
HEIGHT
Height of the box. Default: HEIGHT value of the SIZE command.
FRAME
Thickness of frame.
Default: 0 (no frame).
INTENSITY
Grayscale of box contents as %.
Default: 100 (full black)
Measurements: You must specify decimal numbers as literal values (like ABAP numeric constants) by enclosing them in inverted commas. Use the period as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the form header
1 LN = height of a line relative to the LPI specification in the form header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shading having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
POSITION Command
Syntax
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
Effect: Sets the origin for the coordinate system used by the XPOS and YPOS parameters of the BOX command. When a window is first started, the POSITION value is set to refer to the upper left corner of the window (default setting).
Parameters: If a parameter value does not have a leading sign, then its value is interpreted as an absolute value, in other words, as a value that specifies an offset from the upper left corner of the output page. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value. If one of the parameter specifications is missing, then no change is made to this parameter.
XORIGIN, YORIGIN
Origin of the coordinate system.
WINDOW
Sets the values for the left and upper edges to match those of the current window (default setting).
PAGE
Sets the values for the left and upper edges to match those of the current output page (XORIGIN = 0 cm, YORIGIN = 0 cm).
/: POSITION WINDOW
Sets the origin for the coordinate system to the upper left corner of the window.
/: POSITION XORIGIN 2 CM YORIGIN '2.5 CM'
Sets the origin for the coordinate system to a point 2 cm from the left edge and 2.5 cm from the upper edge of the output page.
/: POSITION XORIGIN '-1.5' CM YORIGIN -1 CM
Shifts the origin for the coordinates 1.5 cm to the left and 1 cm up.
Pre-Setting BOX Position Arguments
You can use the POSITION and SIZE commands to preset some arguments in the BOX command. POSITION presets the start point (upper left corner) of a box or line. SIZE specifies the width and height of a box.
You can use POSITION and SIZE to preset arguments, but you can also set the start point and size arguments of a box or line directly in the BOX command.
By default, if no positioning is specified, the upper left corner of a box or halftone or the top of a line is aligned with current SAPscript window. That is, the upper left corner of the box, halftone, or line starts at the upper left corner of the current window in the active form. By default, the height and width of a box are set to the height and width of the current window.
Use POSITION and SIZE to preset the arguments in a BOX command in the following situations:
The BOX command exceeds the 132-character (1 line in SAPscript) length limitation if you specify all arguments directly in the command. You may exceed this length limit if, for example, you use symbols in a command.
By pre-setting arguments with POSITION and SIZE, you can work around the limitation on the length of a command. You do not need to specify the preset arguments in the BOX command.
You want to use the enhanced capabilities of POSITION for adjusting the starting point of a box or line.
With BOX, you can specify an offset for the starting point only as a whole number (non-negative integer). This command would print a box starting 1 CM to the right and 1 CM down from the left upper corner of a window:
/: BOX XPOS '1' CM YPOS '1' CM
With POSITION; you can adjust the position of a line or box relative to a window much more precisely. In the POSITION command, you can specify positive and negative offsets and use non-integer numbers.
Example: The commands shown below position a box slightly to the left and slightly above a window. This leaves a margin between the edge of the box and the text in the window.
/: POSITION XORIGIN '-.2' CM YORIGIN '-.2' CM
/: SIZE WIDTH '.2' CM HEIGHT '.2' CM
/: BOX FRAME 10 TW
(Note that the box must be enlarged to accommodate the shift. If it is not enlarged, then it will not cover all of the window.)
You can also use POSITION to set the starting point to the upper left corner of the active page format. Example: POSITION PAGE moves the starting point from the active window to the active page format.
You want to use the relative sizing capabilities of SIZE to adjust the size of a box, line, or halftone.
With BOX, you can make only absolute size specifications. BOX HEIGHT, for example, overrides the default height setting to the height of the current window.
With SIZE, you can adjust the size of a box or a line with respect to its previously-set dimensions. The following commands would, for example, draw a frame 1 CM in from the margins of the paper:
/: POSITION PAGE
/: POSITION XORIGIN 1 CM YORIGIN 1 CM
/: SIZE PAGE
/: SIZE HEIGHT '-2' CM WIDTH '-2' CM
REWARD IF HELPFUL

Full width headers

hello,
i know this should be basic but i have a full screen slideshow and i need a header bar and footer bar top & bottom of the screen.
the header and footer will not stretch full width only the width of the page.
the header did at first but only when "sticky footer" was unchecked until i added the footer and need it to stay at the bottom.t know what to do
any help would be appreciated as i am on deadline
i'm sure it's a simple fix but just unsure how to fix it
thanks

In previous releases you could "Snap" the edges of a div (box) to the sides of the gray-outermost area of the stage. This would "Snap it to Full screen width". That still works. But, I think your problem is that the item you want to scale, is an image. So, make a new div (box) and then place your image inside it as a "background fill" re-stretch the box to the sides, or click on the new "100% Width" layout feature. You should get the results you were looking for.
[email protected]

Uneditable full-width bitmap images

Under what settings does Captivate record the state change of various UI elements, like the depression of buttons and the checking of check boxes, as additional narrow, full-width bitmap slices which are not editable or localizable?
For new recordings, it looks like creation of these slices can be avoided by deselecting Record keystrokes in the Recording > Settings category in Edit > Preferences or in Record/Create > New Project > Settings. Is this correct and a known issue?
Has anyone any insight on how to avoid these uneditable full-width bitmap images? The goal is to have a single background that can be localized so they are a major headache and I'd like to know how they can be avoided. Thanks.

I'm complelely baffled. The only bitmap you should have is the background. If you haven't solved your problem, send me your file or a representative slide or two so I can take a look. Sounds like gremlins in the Print Screen key.
Leslie Bivens
E-Learning Developer/Captivate Coach
[email protected]

Table needs to fit full width of page

I want to insert a table that is the full width of the page and all cells equal sized. Without dragging each column wider one by one and trying to equal them out manually, is there a quick setting I can choose in the Inspector or elsewhere to just make the table fill the page width? This must be one of the most basic standard options for tables along with "Fit to contents".

Never mind. Now after struggling with it for several minutes, selecting within the table and clicking outside the table, it suddenly woke up and shows me a resize box on the right. Funny how it didn't appear without a struggle. I have this same issue with text boxes in Keynote and I still haven't gotten it to respond consistently either.

Centering a full width image in Adobe Muse

Can anyone help. I am trying to centre a full width image in adobe muse but I am getting nowhere! I am trying to keep the center of the image in the middle of the browser no matter what the browser width. I am using the image as a fill in a full width box and have tried centering it using the fill options (top centre) and using the align (central ) tool for the box but neither seem to work. My page can be viewed at
www.helioswebdesign.co.uk
Any help would be much appreciated
Yours
martin

To add images press CTRL+D and then select the image and place it where you want.
To hyperlink it go to the top menu and there should be Hyperlink folowed by a box. Enter your URL to link in there.
You can also use the slideshow widget should you want to make a slideshow.

Full width caption boxes for lightboxes

Similar Messages

Maybe you are looking for