Full Width Image/Slider

Hi everyone,
I'm having some problems using the full width option in relation to height.
I want my image to adjust to both height and width as per the top image/slider following Adobe Muse Site of the day website - Home
At present the width of my image adjusts perfectly on different browsers, but the height just cuts out part of the image rather than increasing it's size. The images I am using are more than adequate in size to adjust to even the largest of resolutions.
Since the above Adobe Muse created site manages to achieve responsive height and width I was wondering how this is achievable?
Thank you

Can someone tell me how one would go about getting some customer support from Adobe?

Similar Messages

Centering a full width image in Adobe Muse

Can anyone help. I am trying to centre a full width image in adobe muse but I am getting nowhere! I am trying to keep the center of the image in the middle of the browser no matter what the browser width. I am using the image as a fill in a full width box and have tried centering it using the fill options (top centre) and using the align (central ) tool for the box but neither seem to work. My page can be viewed at
www.helioswebdesign.co.uk
Any help would be much appreciated
Yours
martin

To add images press CTRL+D and then select the image and place it where you want.
To hyperlink it go to the top menu and there should be Hyperlink folowed by a box. Enter your URL to link in there.
You can also use the slideshow widget should you want to make a slideshow.

Full width images? Not slideshows!

Hey, How can I have an image to be the full browser width? I know this possible with slideshows but o just want the single image! Ideally so that it is resized to fit different browser widths? Cheers

II've tried that, the only issue is that when I reduce the size of the browser the image is cropped into. Is there a way of getting the image to remain the same, resizing to correspond with the browser width?

Insert Image with full width

Hello,
I'm trying to insert a full-width image (like a header, or a graphic cover, footers and stuff) but no matter the size I make the image on Photoshop, it always shrinks when I insert it in Adobe Acrobat XI
I know I can drag and make it full-width, but then I loose a lot of graphic quality in the process. Is there a way to disable the auto-resizer when adding new images?
Thanks!

Actually if I'm not mistaken, the pixels do matter, but the relation between pixels/size are determined by the DPI you set to the image.
My PDF file is 110 DPI (110 pixels per inch), and the images I do in Adobe Fireworks are 110 DPI as well.
No matter the size I do the images, they always get resized to about 70% of the page's full width.
I'll take some screenshots of the process and post them here
Here:
Creating the image (21cm wide (100% of pdf's width), 3cm height.. 110 dpi)
Adding it to the PDF trough the Tools menu bar (right side)
The output... A image with 70% of the PDF's width, where it should be 100%
And as you can see, the PDF's DPI is set to 110, the same as the image
So I can only conclude that Acrobat is resizing my images, maybe to fit the margins or something, and I would like to disable that :]

Full width parallax menu scrolling

Hi all, did anyone of you have this problem that I am encountering? My site www.west-coast-equine.ie loads perfect but when using the anchor based menu the full width fill of the background pics shifts to the left. Would appreciate some input and thank you in advance

I believe the issue is resolved ? As i can check on my end and dont see the same behavior you have mentioned with full width images.
Thanks,
Sanjit

Uneditable full-width bitmap images

Under what settings does Captivate record the state change of various UI elements, like the depression of buttons and the checking of check boxes, as additional narrow, full-width bitmap slices which are not editable or localizable?
For new recordings, it looks like creation of these slices can be avoided by deselecting Record keystrokes in the Recording > Settings category in Edit > Preferences or in Record/Create > New Project > Settings. Is this correct and a known issue?
Has anyone any insight on how to avoid these uneditable full-width bitmap images? The goal is to have a single background that can be localized so they are a major headache and I'd like to know how they can be avoided. Thanks.

I'm complelely baffled. The only bitmap you should have is the background. If you haven't solved your problem, send me your file or a representative slide or two so I can take a look. Sounds like gremlins in the Print Screen key.
Leslie Bivens
E-Learning Developer/Captivate Coach
[email protected]

Full width slider problem

Hi
I want to create website with full-width slidershow. But when i publish from the muse neither the full width slider is shown nor the image.
im sharing the link that i published from muse: http://pakstaryeni.businesscatalyst.com/index.html
and this is the image from adobe muse preview :
I tried almost everthing i can but in the end it never works. Can you please help me how to solve this issue?
thank you
eray

Hi Abhishek
its the same. I could not fix this problem. I also made another website which has the same problem. This is the link of new website: http://atasehirmey.businesscatalyst.com/index.html
Again slider in main page does not work, compositions are not working and gallery doesnt appear. Do you have any suggestion to fix this?
Thank you
Eray

How can I get a header image to span full width of page?

Hi All
I have tried just about every thing to get this image to span the full width of the page, its fine in design mode but when I view it in preview its centred with white space either side.

Hi Brad
Thanks for your reply, I have treied that also with similar results.

In the slide show view how can you pin the "next" Arrow to the ultimate edge so it is in the same place as the full screen image, it will pin to the left edge but not the right.

In the slide show view how can you pin the "next" Arrow to the ultimate edge so it is in the same place as the full screen image, it will pin to the left edge but not the right.

Hello,
Please make sure that the next button is pinned to the right side as there in the attached image.
If it is already pinned, you can try removing any embedded HTML code and checking it.
Regards,
Neha

Full legend in image slideshow full width

Hi Everyone,
I can't get a legend full width with a background color in the image full width ( Slideshow ) , could you help me please ?
Thanks
Message was edited by: zeek zeek

@iamDK,
Thanks for the response. I am familiar with Pinning and Slideshow Widgets and have been using Muse since it's inception, what I don't understand after watching one of the videos in which Terry White mentions FullScreen or Browser Width using the Slideshow widget and as Jason Bibby at the top also mentions, I have not had any success using any of the SS Widgets again to acheive this effect. Pinning the SS Widget to the top of the Browser does just that and does not stretch images within it to fill the Browser Width even if you get inside the widget to expand an image so that it snaps to the edge of the Browser still does not do it regardless of weather its pinned or not.
I've had to jump into DW to get this done - in combination to using Fluid Grid, which I had rather not but so far so good, at least its responsive and not having to create twice in the case of Muse. I love Muse for its simplicity, being able to whip up pretty much any design in no time is sweet, but having a SS that stretches Browser width is a common trend and I'd like to see it integrated into Muse and if it can be done now as the video shows then how?
If you know how to do this in Muse could you please show us how?
Kind regards,
Kelvin

Full width slider

Add your program to the full width slider, many people want it, should not be hard for you ... full screen slider takes up a lot of space and problematic in terms of design ... PLEASE

Hi
Thank you for the suggestions, please feel free to suggest you points in our Ideas section.
Regarding full width slide show , you can try this :
http://www.musegrid.com/adobe-muse-widgets/iframe-builder-pro
Thanks,
Sanjit

Full Screen Slide Show and Full Width Object Odd Behavior

This look slike a bug to me. It happens in both the shipping version and the new native beta version of Muse.
I made a full screen slideshow. Put a full, browser-width rectangle at the top of the page for the Nav Bar. Rectangle is 75 pixels deep and touches the top of the browser.
Preview in browser, all is well.
Now, put a horizontal menu on top of the rectangle and set it to be also 75 pixels tall. Preview in browser and the full-width horizontal rectangle disappears. Make it not full-width, and it comes back.
If you can't re-produce this, I can post my page on Business Catalyst or send a file to Adobe.

By default iWeb resizes your images to no more than 800X600. They playback in a window.
If you want viewers to see the full size images you want to make a "Photocasting" page.
http://www.apple.com/ilife/iphoto/features/photocasting.html

Optimum size for a full browser width image?

Hi all,
I'm pretty new to Muse and these forums (hello everyone!) and have been tinkering around with some features.
I'm currently creating a website for my band that integrate a full width browser image at the top of each page. I was wondering what the optimal settings are for the image size to make this work? It all currently works fine, but on larger screens the image is so zoomed in it's impossible to make out what it's of! The site is designed for smaller screens so this works fine, I was mainly wondering if there's a recommended size to optimised the images too for the width.
Any help would be greatly appreciated!
Kind regards, Ekke

This must be a hard question to answer...for anyone...because I have tried many times before to get this question answered. I have looked at other examples of Muse sites and I have decided to go with a 2000 width for my images when I want to go full screen. I have no idea if this is correct but I get good results pertaining to how it looks. Now, I don't know if it is the optimum size in terms of download speed. No one will touch this question thus far. My research came from looking at what others did that built Muse sites as a profession.
The Muse team should address this topic of optimal images for all platforms and how images can be used throughout the build not only for the above stated but for efficiency of site building.

Question slide- Launch a full screen image in new window.

Hi,
I am using Captivate 4.
In the question slide (MCQ/ Matching) I want to have a transparent button over a thumbnail image.
On clicking this button, it lanches a full screen image in a new window.
The student views the image and answers MCQ, Matching (droplist) on the main screen/slide of captivate.
This new window can then be closed by clicking 'X' on top right corner of the window.
How to do this?
Thanks and regards
Rajan

Hi there
Instead of a Transparent Button you should think instead about Click Boxes. But either way, Captivate doesn't allow Buttons or Click Boxes to be inserted on Question Slides.
However, Captivate does allow you to insert Flash objects on Question slides. So you could develop a Flash object that would carry out the desired actions when clicked. Then insert the object on the Question slide.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

Full browser width image with tiled pattern not previewing or publishing.

Using the rectangle tool to create a full browser width image, I filled it with a tiled pattern and added a drop shadow. This 80px tall rectangle serves as the background bar of my top menu navigation. Everything looks great when building in Muse CC, but when I go to preview or publish, it's missing altogether.
Any ideas?
http://moonstonebistro.businesscatalyst.com/index.html
~ Kacee

Looks like you have deleted the site now. If you were experiencing any errors during publish, most likely it happened due to the recent outage with BC with loading of assets to sites hosted on US DC - http://status.businesscatalyst.com/.
Thanks,
Vinayak

Full Width Image/Slider

Similar Messages

Maybe you are looking for