Fullfil sales order and deliveries are still appearing in MD04.

Hello Experts
After an upgrade Ehp6.4 to Ehp6.6 the fullfil sales order and deliveries are still appearing in MD04.
We runned SDRQCR21 and released the documents from MD04 but when the users create new sales orders and deliveries and completed them the reservation does not disappear from MD04.
My Availability Check is CH
Check.rule (SD order) and (SD delivery)
Somebody could tell me how can I solve this issue.
Thanks for you help

Please check the document status in VBUK or VBUP table may some of the documents partially PGI'id
Also please refer the below document which is very helpful.
MD04: Problems with sales orders
thanks,
srinu.

Similar Messages

Sales Order deleted but Demand still appear on MD04

Dear Master , anyone know for a Sales Order been deleted but the Demand still appear on MD04, I even tried as below but still no solution
- ran report SDRQCR21 in SE38 that cleared up the demand.
- Try rerunning MRP with planning mode 3
- Mark delivery complete for the order.and make rejection in the sales order by entering the reason.
Thank you.

1) Please check any Open delivery is exist for the order, if yes delete the Delivery
2) Close the order by order rejection
3) run SDRQCR21 in SE38 with data transfer , planning file entry and processing per material tick
4) This will remove the planning file entry and demand and run MRP
5) If problem still exist , then raise a Question to SAP with the help of Basis

Data Validation for SD Sales order and Deliveries

Hello All,
We activated the data flow for SD sales Order and Deliveries for Infocubes 0sd_co4 and 0sd_c05 and there correspoding datasources.
I have 2 queries
1. How to validate data for BI SD sales order with ECC.
2. How to validate data for BI SD Deliveries data with ECC.
Kindly help, <removed by moderator>.
Thanks,
Rakesh.
Edited by: Siegfried Szameitat on Jun 21, 2011 12:51 PM

Hi Rakesh,
You have to check the tables in R3 and then compare with the Datasources in BW.
For Examples
VBAK table in R3 for Sales Order on BW-2LIS_11_VAITM
VBRK table in R3 for Billing iin BW-2LS_13*
Check for that day how many sales order were there in VBAK table and there in BW.
Rgds
SVU123
Edited by: svu123 on Jun 21, 2011 8:19 PM

Copy Control between Sales Orders and Deliveries

Hi Gurus,
please can you tell me why copy control between Sales Order and Delivery doesn't work?
At header level, into copy control, we can set 2 requirement routines, one as general requirement for copying (TVCPL-AUBED) and the other one as requirement for grouping orders into deliveries (TVCPL-AUZUS).
At header level we can also set a routine for data transfer to define how data are passed from Sales Order header to Delivery header (TVCPL-GRUAK).
Then we can set routines at item level, one as requirement (TVCPL-AUBED) and one as data transfer (TVCPL-GRUAP).
When delivery is created with VL10A transaction, at header level only the first general requirement routine is used (FV50B***). Grouping requirement is not used (we also set a break point and the program is not passing into this routine).
Then it is used the requirement routine at item level (FV50B***).
Please can you tel me how we camake working the routine for grouping requirement at header level?
Thank you very much.
Kind Regards
Andrea

Hi, we used standard routine even if to be sure we run also the generation report you mentioned.
Please any other suggestions?
Thank you very much.
Kind Regards
Andrea

Cost Center and Profit Center in Sales Order and Deliveries.

What are the different methods of determining cost centers and Profit centers in Sales orders ?
Can Cost Center be determined independently in sales order or will be detrmined from Profit center ?

Hi Sunil
Profit Centres are used primarily in S&D (at billing stage it is transferred to FI) for registering revenue.
Billing -
Integration Points Module
Debit A/R - FI/ CO
Credit Revenue - FI/ CO
Updates G/ L - FI/ CO
(Tax, discounts, surcharges, etc.)
Return Delivery & Credit Memo -
Integration Points Module
Increases Inventory - MM
Updates G/ L - FI
Credit Memo - FI
Adjustment to A/R - FI
Reduces Revenue - FI
Profit Centers can be set-up to identify product lines, divisions, geographical regions, offices, production sites or by functions. Profit Centers are used for Internal Control purposes enabling management the ability to review areas of responsibility within their organization.
The difference between a Cost Center and a Profit Center is that the Cost Center represents individual costs incurred during a given period and Profit Centers contain the balances of costs and revenues.
Regards

Opening and closing stock with sales order and with out sales order

hello,
any body please help me my client want to check opening stock and and closing stock in areport.
material contains batch and some material with sales order and some are with out sales order. my client is asking this in a single layout. please tell me isthere any teport or bapi or function module to get this report.
this is very uregent. and layout is requesting like opening stock, production stock, sales stock and closing stock.
please guide me to get this report.
Thanks & Regads
Bhakta

Transaction MB5B
For sales order related use specila stock as E and use radio button indicator in stock type
For stock w/o sales order, use special stock indiactor as "space' and stock type valuated stock.
to get a perticular month,opening stock/closing stock enter the start date/end date as month start and end date.
See the o/p which will give the stock as required by you

Avoid combination of sales orders in deliveries

Hi people. The users needs to do a delivery for each sales order. But they work with the VL10* trx. I tried to do it, changing the copy control between sales orders and deliveries, but doesn't work. Reading the SAP documentation, I noticed than maybe its not possible avoid this, because the mass transacctions (VL10*) had its own routines of combination and always will try to combine if its possible.
It's this true? Can I avoid this combination? How?
Thanks in advance.

Hi,
If this scenario is not a regular scenario and used for few customers,
you can use 'VL01N' transaction to create a delivery for a single SO.
other wise you need to develop a user exit for the specific customers need to have a single deliveries and include it in the proper location of delivery creation program.
hope this helps you
Thanks
Venkat Cheedalla

Open sales orders and open deliveries and open billing doc to sap from legesy

Dear all
i have some open sales orders and open deliveries and open billing doc are there in the legesy system
so i want to know how to transfer the doc to sap by using lsmw plz tell me

Hi Amith,
it is always good to search in Google before posting .LSMW is very old topic and i am sure you will get lots of Documents on this .Please go through the below link .you will get some idea on this.
http://scn.sap.com/thread/1012472
there are 14 steps in LSMW and it is same for all (master data and Transaction Data)
Pls practice this in your sand box or quality system before working it in the client requirement.
Hope this helps to you
Regards
Sundar

We are using EBS 12.1.3. When we input a sales order from a customer we input the sales order and specify the date the customer wants it. This isn't always the date that we intend on manufacturing it though. I need to put a customer due date in, but be

We are using EBS 12.1.3. When we input a sales order from a customer we input the sales order and specify the date the customer wants it. This isn't always the date that we intend on manufacturing it though. I need to put a customer due date in, but be able to put a date in another field that MRP can read in the event we choose to manufacture based on another date. For example, early.
Any help would be appreciated.

What you are experiencing is 100% related to Malware.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

After downloading Maverick, my photobooth images were out of chronological order. I've now downloaded Yosemite and they are still out of order. Is there a fix for this?

After I downloaded Maverick, I noticed that my photobooth images were out of chronological order. I've since downloaded OS X Yosemite (10.10) and they are still out of order. My version of Photobooth is 7.0 (719). Is there a fix for this? Many thanks in advance.

8-doing a factory reset, then repeating steps 1 through 6
Do you mean a restore to factory settings?. If so did you set up as new or restore from back up afterwards?

Sales order and Item no is not appearing in the Notification

Dear Experts,
1] While Creating notification through Q1 Notification type I am entering sales order and Item No under Processing tab,And I will save the same.
When I go QM02 transaction the entered sales order and Item No will not be available.
2] While Creating notification through F1 Notification type I am entering sales order and Item No under subject tab And I will save the same.
When I go QM02 transaction the entered sales order and Item No will not be available.here also the enter sales order and item is not available.
Please suggest how to get the same.
Thanks in advance

Dear All,
Please find the below steps the way I have constructed the Notification.
Go to Transaction QM01
In the Initial screen enter Notificaiton Type as 'EC'
Then Press Enter you will get in to screen.
Under "Subject" Tab
Enter Problem by selecting F4 drill down menu
Enter Department selecting F4 drill down menu
Then Go to Next Tab "Reference Objects"
Here Enter Sales Order as '45000031' and in the next field '10000' and Finally Save the transaction.
and Note down the Notification Number.
Then Go to next transaction QM02 [Notification Change]
Enter the generated Notification No.
And Go to Tab "Reference Objects" , Here see the already enter 'Sale order- 45000031 and 'Item-10000' Which will not be appearing.
Please suggest.
Your Quick responce is highly appreciated.
Thanks and Regards

I change my email my Verizon email to Comcast email. I am continually asked to give my password for my old email which I deleted. I have deleted this Verizon email from every area on my iPad that I'm aware of, And yet he still appearing. How do I solve

I change my email my Verizon email to Comcast email. I am continually asked to give my password for my old email which I deleted. I have deleted this Verizon email from every area on my iPad that I'm aware of, And yet he still appearing. How do I solve this.

What you are describing sounds like you created a new apple id with your new comcast email address. There may be apps on your ipad that are associated with another id that was using your verizon email address. If thats what you're saying then those apps need to be updating by using the apple id that was used when they were downloaded.
If you're talking about something else then maybe a lttle clarification is necessary.
Go to settings/itunes and app stores. make sure the correct apple is shown.
Go to settings/mail, contacts and calendars. Makes sure all of the accounts are current.
Go to settings/icloud, facetime and messages, verify the same.

Open Sales orders and delivery orders are updating credit exposure

Hi
Can anyone please tell where is the setting in config in FSCM Credit management by which we can determine that even open order and deliveries(that is before accounting doc gets created) getting updated in credit exposure.
Thanks a lot.

OK - now this is a slightly different question.
Data is transfered from AR and SD into FSCM Credit Management via PI
Please refer to SAP Help for more information

In case of Factory sales, ECS values alone are not appearing

Hi friends,
In case of Factory sales, ECS values alone are not appearing in the sale order
and billing document even after maintaining excise rates in J1ID as 2% and condition
record as 100% for both JECS and JECX condition types, finally I checked with tax
code but still I am facing same problem. But same 2% values are appearing in J1IIN
screen.
Please help me out in solving this problem.
Thanks and regards,
Swamy H P

Dear Swamy
Ensure the following in your pricing procedure, for condition type JECS.
- The "From-To" step number should be the step number of JEX2.
- The Calculation Type should be 366
- For JEX2, Calculation Type 353 and Account Key EXD are maintained
thanks
G. Lakshmipathi

Creation of u201CHeader Textu201D in sales Order and Invoice

Dear friends,
Can any one guide me the complete configuration settings that are required for creation of u201CHeader Textu201D in sales Order and Invoice. Please help me to overcome this issue.
Regards,
Bhanu.

Hello Bhanu...
Hope you are aware of the configurations you need to maintain for the Text determination.Anyway, herewith are the steps that may help you to accomplish your requirement.
Text Determination procedure for sales document header:
Text can be determined at sales document header level or it can be imported from customer master. The process is...
Define Text types:Path: Imgsales and distributionbasic functionstext controldefine text types
Select sales document header. Click on text types go to new entries and define text types. For Eg:Z1
Define Access sequence:
Select sales document header
Click on change icon
Click on access sequence control button under dialog structure
Go to new entries and define access sequence number with description.Ex: 55
Save it and exit
Define text determination procedure:
Go to new entries
Define text determination procedure.Ex: ZX save it and exit
Assign text id's to text determination procedure:
Select your text determination procedure(ZX)
click on text id's in text procedure control button under dialog structure
go to new entries and maintain entries. Text id:assign text id (Z1) that we defined in the previous step
Specify sequence No-10
Check Reference: this indicator specify that the text is reference or copies from preceding object
Text in obligatory: text will be displayed during copying. the value of this field specifies whether text is obligatory or not and if it is obligatory the how it is to be displayed
Apart from this... you also have to maintain the text in the Customer master as mentioned in the previous mail..
For this you have to maintain the customer text.Do the following steps.
1. Go to Customer master, Choose from the Menu Extras --> Text and mention the text
2. Then in a sales order automatically wehn you are entering that sold to party..the header message will be appearing..
In a nutshell i would request you to check weather you have maintained the Sales-Customer text KNVV and also that you have maintained all the required customizing settings for the text procedure, access sequence etc were completed....?
Also make sure that the text type is also inclueded in the text determination procedure of the sales document header...
Note: If all the settings of text determination exists and still if the text is not appearing then In sales document Header Text procedure, select sales header procedure, then select Texts in procedure. Check for the Header note, No. box is checked. This check mark ensures text is to be displayed when it is copied..
Its should be working if all the requried setting are made....
Reward if this helps..
Thanks,
Safeer Rahman

Fullfil sales order and deliveries are still appearing in MD04.

Similar Messages

Maybe you are looking for