Fullscreen across 3 monitor

hi am pretty desperate... is there a way to open a projector
i created (maximum 2800x768 in flash) which is as-ed to open
fullscreen across 3 monitors, hitting a resolution of
3072x768?

madmagius wrote:
> hi am pretty desperate... is there a way to open a
projector i created (maximum 2800x768 in flash) which is as-ed to
open fullscreen across 3 monitors, hitting a resolution of
3072x768?
Not with flash itself, only with 3rd party tools like
Jugglor, from:
http://www.flashjester.com
Best Regards
Urami
"Never play Leap-Frog with a Unicorn."
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Similar Messages

Adobe Air Fullscreen Across Monitors

Hi,
Is it possible to have adobe air in flex to run in fullscreen and span across 2 monitors? Because currently I have a project need adobe air to run in fullscreen on 2 monitors. One display some flash animation, and the other one display video playback. Is it possible to do so?
Thanks.

Hello? Is it possible to archieve this is Adobe Air? Thanks.

Final Cut Pro - startup with fullscreen black monitor

Hi,
when I start Final Cut Pro I only get a fullscreen black monitor. Only the topnavigation shows up wehn I move the mouse to this area.
regards
arex-germany

... found it.
The option "Digital Cinema Desctop Preview - Mainmonitor" was activated in the Menu "Anzeigen"

Stop Bridge from Auto Expanding Across Monitors

This has been happening for a while, but my bridge usually lives on my right screen but it will sometimes automatically span across both of my monitors when I do an action like create a new folder and then it blows up all the thumbnails so their huge. It's becoming annoying and if anyone knows how to stop this from happening I would greatly appreciate it. My machine is running windows 7 and no other app does this, only bridge.
Thanks

You may find that it's not a 'Bridge' thing. I presume you are on a Mac... and have the lastest OS?
When you do a hard shut down and then restart, any apps that were open will re-open.
Also if you quit a program with something open. Quitting and restarting the program automatically opens what was previously open.
I find that I have gotten into the habit of closing before quitting... quite annoying.
I hope I didn't go off topic too much...

Fullscreen & 2 monitors

My system has two monitors. The application allways opens and goes to full screen mode on the primary monitor. How to choose a monitor for full screen mode?

I can confirm this problem with JavaFX 2.0.2. No matter what you do, it is not possible to have fullscreen active (which hides the task bar in Windows for example) on a screen that is not the primary screen.
For example, setting fullscreen on, then moving it to a different location will cancel full screen. Moving it first to the correct location, then activating full screen will move it back to the primary screen.
Has this been reported as a bug, or is there a fix in the works?

Lines Going Across Monitor of iMac?

Hello,
I bought my iMac 3 Years Ago - iMac (24-inch Early 2008) - but within the last year I have begum to notice "lines" or "tears" going horizontally across parts of the screen. They show the colour of the screen, but can still be seen. They are seen most easily on Colours.
I've Attached some pictures, with a green box showing the lines.
Obviously my computer is way out of warenty (i didnt get Applecare) - is it worth going to an Apple Store and Asking about this? It is simply a Display fault or can it be fixed another way? I've had to have a few hardrives replaced in my machine by apple so They might give a free repair due to the previous history of the machine needing repairs.
Any Suggestions?

In the US, Apple computers are guaranteed for one year -- Applecare adds additional 2 years plus free telephone support.
I would assume the warranty in the UK would be equivalent or better.

Remove the "stop" when moving cursor across monitors |BUILD 9860

I run a setup of 2 monitors. 1920 x 1080, and one 1440 x 900. When I try to move the cursor over from one monitor to the other it "stops" until i drag faster. Extremely annoying, is there any way to turn this off, or is it a bug?
Maybe I could keep it if it wasnt so hard to move the mouse over the screens, but this is terrible .. I cant use windows like this.
Also, its hard to find all the settings for the mouse, like the cursor acceleration etc.

It's the same in Windows 8.
I too have 2 monitors at work with Windows 10 and 2 monitors at home with Windows 8.1
On Windows 8 there is Charm panel at the right edge of the screen and Modern UI apps preview switcher at the left edge of the screen.
On Windows 10 they are disabled in Taskbar and Start Menu Properties, but it seems that traces of screen corner and edge navigation still remain.

Running fullscreen on monitors with different aspect ratios

I am trying to run a program in fullscreen on a projector. It works fine on my computer, but the background image appears stretched when I run it on a projector with a different aspect ratio. How can I run it as to prevent this?
This is how the code looks:
@Override
     public void start(Stage primaryStage)
          this.PrimaryStage = primaryStage;
          this.PrimaryStage.setFullScreen(true);
          ......which runs with this CSS file:
#background{
    -fx-background-image: url("background-full.png");
    -fx-background-repeat: stretch;
    -fx-background-position: center center;
    -fx-background-size: auto 100%;
    -fx-background-color: black;
}

Don't stretch the repeat
-fx-background-repeat: no-repeat;
AND
-fx-background-size: cover;
Scale the image, while preserving its intrinsic aspect ratio (if any), to the smallest size such that both its width and its height can completely cover the background positioning area.
Or
-fx-background-size: contain;
Scale the image, while preserving its intrinsic aspect ratio (if any), to the largest size such that both its width and its height can fit inside the background positioning area.
Contain will provide a kind of letter box effect like watching an old 4:3 tv show a widescreen 16:9 TV.
Cover will fill the screen with the image bug clip some of the image if the screen and image aspect ratios don't match.

Green/red pixels across monitors, then screen freezes

Hi
any ideas?
pc (OptiPlex 420) starts up fine then double monitors break out in pixel measles and pc becomes unusable. Only solution is to hard stop the pc as keyboard/mouse die.
Restart creates same cycle again. I'm a luddite, so if any brain boxes out there can advise (and thanks in advance if you do :)
cheers
Chris

GPU is overheating.

Playing movie full-screen across two monitors?

I have a PC with a pair of 800x600 monitors side-by-side for a dual-monitor desktop. I want to play a very wide (1600x600) QuickTime movie fullscreen across them both (not simply mirrored), with no window border or Windows taskbar visible. But when I click the zoom box for the movie window, it resizes the window to one display, so that it doesn't touch the other display at all.
I'm not currently using QuickTime Pro; will paying for that upgrade allow me to play a movie "Full Screen" across two screens, or will that still limit the movie to one screen?
Is there any other way for me to play the movie across two displays? (Again, not mirrored - the movie is wide enough to fit both displays.) Is there some other QuickTime movie player that'll do this for me?
(The movie is a pair of eyes looking back and forth. It's for a Halloween display, one monitor per eye.)

I had an older version of VLC and it did not work but I tried the beta version of 0.8.4test1a and it plays everything from h.264,mpeg4,mpeg2,avi,vob,wmv and a few more. The only other things I know I have done is that I have the pro version of quicktime 7.0.3 and I have a codec pack from ColeMedia Codec Pack from http://www.cole2k.net/ other than that I don't know what else I did that made it work.

Watch fullscreen movie on 2nd monitor & work on my MBP @ the same time?

I hooked up a 2nd monitor to my MBP (mini to VGA) and figured out how to have an extended desktop. It's a little tricky adjusting where the pointer will be (I don't totally understand it, but with trial and error and lots of persistence, I finally got it to ALMOST be set up the way I'd like).
I have a movie (.avi file) playing on the 2nd monitor and I'm able to work on my MBP, but I can't figure out how to view the movie fullscreen because when I get the 2nd monitor fullscreen, my MBP screen goes fullscreen as well (and of course the dock and any form of control disappear as my MBP screen is just dark and blank).
Does anyone know the trick to getting the setup that I want? FULLSCREEN 2nd monitor to watch .avi files while working on my MBP???
I could really use some help on this one! THANK YOU, oh knowledgeable one(s) who reply!!!

You won't be able to do it with the included QuickTime media player. But it can be done with other media players like MPlayer or VLC I am pretty sure. Haven't had this exact need myself but have seen other similar threads and recall the above being recommended. Good luck.

Dual Screen monitor Question

I have desktop split across two monitors(1s a tv)
I've already setup Quicktime play in fullscreen on monitor two(tv) but I'd like to be able to have the second monitor turn off after a while when in fullscreen.
Is there any setting/plugin/app that'll do that for me?
Intel iMac Mac OS X (10.4.8)

turning of the first monitor isn't an option since i'm using an iMac
Intel iMac Mac OS X (10.4.8)

Colour profiles within PS are off for one monitor only?

Hi guys,
I'm having a very strange issue with colour management in Photoshop CS2 currently.
Photoshop seems to be calibrating all documents in a strange way on only *one* monitor. If I drag the file across to the other monitor the colour is completely different.
Of course it sounds like my monitors being off, however when dragging the file across monitors Photoshop slowly updates the colours for the next monitor. You can see it display the wrong colour at first, then correct it (hopefully that makes sense).
Another symptom of it is when I go to 'save for web'. Here, the colours revert to what I believe are correct.
b It's worth noting that this has only started to happen since some Windows updates. One being an option update from Dell for my monitor - I can't seem to find any information about it though!
My tester that I've been using is a plain white to black gradient. What I'm seeing is a lot of cyan in the middle of the gradient. I've saved off an example:
http://2dforever.com/photoshop.png
As you can see, all the greys are very green, but if you look at the gradient tool in the toolbar itself, the grey appears fine.
I'm unsure how I can adjust the colour profile from Photoshop for one monitor - am I missing something really obvious here?
Just to note: I'm on Win Xp SP2, Photoshop CS2, and I've cleared the preferences.

Since you only mention Photoshop as having a problem, this is almost
certainly, as you suspect, a monitor profile config problem.
Color profiles for individual monitors are configured in
Start>Settings>Control Panel>Display>Settings>(Advanced Button)>Color
Management.
In Settings, click on the monitor whose profile you want to verify before
clicking on the "Advanced..." button. I would start by adding and
defaulting the profile for the monitor that is causing problems.
The Microsoft XP color control panel applet makes setup easier, though it
is not really necessary. If the link below fails, google for keywords
Microsoft XP color control panel applet.
http://www.microsoft.com/downloads/details.aspx?FamilyID=1e33dca0-7721-43ca-9174-7f8d429fb b9e&displaylang=en

Why is my bookmark properties dialog so large on a dual monitor machine?

I am not sure if this is related to having dual monitors or not, but on my machine, when I open the properties dialog for a bookmark, it spans across monitors and the dialog is huge.
How do I shrink this back down to the original size?
I will be attaching the image as a reply to this post, if possible.
Thanks in advance,
Joe

'''Try the Firefox SafeMode''' to see how it works there. 
''A troubleshooting mode, which disables most Add-ons.'' 
[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode#w_safe-mode-window_2 Troubleshoot Firefox issues using Firefox SafeMode]
When in Safe Mode... 
* The status of plug-ins is not affected.
* Custom preferences are not affected.
* All extensions are disabled.
* The default theme is used, without a persona.
* userChrome.css and userContent.css are ignored.
* The default toolbar layout is used.
* The JIT Javascript compiler is disabled.
* Hardware acceleration is disabled.
* You can open the Firefox 15.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

Software to drive multilple monitors

Can someone recommend a software app that will allow me to drive 4 or 6 monitors? Content might be unique on each monitor or be stretched across monitors. It might show video on one and pictures on others. etc.
gbs

I don't know how I will connect them.
I am looking for a solution that allows a wall of monitors in a lobby. I came across a thread that talked about this in the past but can't find it.
There was a Mac application that was made for this type of use.
gbs

Fullscreen across 3 monitor

Similar Messages

Maybe you are looking for