Fullscreen doesn't work with Silverlight for Netflix movies

Recently, when I restarted watching Netflix, I can't go to Fullscreen. I called Netflix and they had me reinstall Silverlight, which I did, but to no avail. Any ideas here?

Go to the AT&T support site and verify that you have setup Mail with the correct confuguration, i.e., ports, server names, etc. Otherwise, you haven't provided enough details to be of much assistance.
Rcommend that you get a .me account and start using IMAP email in lieu of POP3. You can then configure your existing AT&T account to forward all email to your .me account.

Similar Messages

Why won't safari 7.o.1 work with silverlight and netflix using mavericks?

Netflx requires MS Silverlight. After installation Safari leads to the Netflix prompt "thanks for downloading, please restart your browser"--restarting browser doesn't work, nor does restarting computer. Netflix works with Silverlight on Firefox however. So, it seems like a Safari problem. Netflix techs couldn't help. I'm using a MacBook Air with Mavericks. Thank you for any advice on getting Safari (7.0.1) to work with Silverlight with Netflix.

Neither one of those Safari extensions are beneficial, so I suggest you uninstall them.
Safari Restore looks like junk. It's no longer required anyway since Safari already incorporates what it allegedly does.
Folx may have corrupted the Silverlight download, therefore I suggest repeating my above instructions to remove and re-install Silverlight.
Restart your Mac in "Safe Mode" and determine if you can load a Netflix movie then. Netflix will stream in Safe Mode, but the video is likely to stutter and there may be no audio.
Please read the following first:
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
You must disable FileVault before you can start your Mac in Safe Mode.
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.

I have an AT&T Email Account that doesn't work with Mail for Lion

I've had this email account with AT&T for a few years and it has worked with Mac Mail with no difficulty for a few years. Recently the account has been able to receive messages. Every time I hit Get Mail it asks for a password. I have installed all the latest updates through Software Update. I have a Mac Mini with OS Lion. After struggling for awhile, my inbox eventually comes in. I have reset all the incoming and outgoing POP Server accounts, as well as used the Webmail version through Yahoo.com and it all works fine. What is going on and how can I continue to use this program.

Go to the AT&T support site and verify that you have setup Mail with the correct confuguration, i.e., ports, server names, etc. Otherwise, you haven't provided enough details to be of much assistance.
Rcommend that you get a .me account and start using IMAP email in lieu of POP3. You can then configure your existing AT&T account to forward all email to your .me account.

Microphone has static & doesn't work with FaceTime or photo/movie, any suggestion?

The microphone on the iPad does not work, on face time. Any suggestions?

Hi !!!
have you gone into the creative console launcher and in the settings have you enabled the 20+ Db bass setting ? if not go to ventrillo settings and increase the slider for the output!!!! it will prompt you to go to the 20+ db setting and change it......
If it stil doesnt work, not being funny but you can hear yourself on the test? so the mic is on and receiving? go through the control panel/ sound/voice/setup and run the test program..if that works and ventrillo doesnt!!!! Pray !!!
!!! no just laughing......re install it and go to the site and ask for advice..
Sorry this is all i did and it worked.....
Have fun..
:smileytongue:

Trying to load illustrator 6cs onto new mac and the old activation code for my ill cs doesn't work with it

Trying to load a downloaded version of illustrator 6cs onto new mac and the old activation code for my illustrator cs doesn't work with it. Do I need a new code or am I missing something? Same goes for my Photoshop cs.

you need your serial number.
if you purchased from or registered with adobe check your account, https://www.adobe.com/account.html

How can I get Firefox version 5? I use an application for banking that doesn't work with version 6 yet.

I am using an application for banking with Bank of America that doesn't work with Firefox 6 so I need to install Firefox 5 until Bank of America can update their app to work with Firefox 6. Can you tell me how to find the download for Firefox 5?
Thank you

I have an old iPhoto version and it still works with Mavericks, the version before yours, that is puzzling.

Publish for Approval - the new plug-in - doesn't work with Leopard

This aperture plug-in arrived for download just a few days before Leopard arrived. It worked great with Tiger. It doesn't work at all with Leopard. It appears that Leopard comes with a new version of Apache Server and it doesn't work with the Publish for Approval plugin. Does anyone know if and when an update will be released?

I'm not seeing the Java plugin in the plugins list in the System Details list.
Did you install the 32 bit Java version?
Do you see the Java plugin in "Firefox/Tools > Add-ons > Plugins"?
*https://support.mozilla.org/kb/Troubleshooting+plugins
*http://kb.mozillazine.org/Java

When I update apple driver, a pop-up error message "The folder you specified doesn't contain a compatible driver for your device. If the foldre contains a driver, make sure it is designed to work with Windows for x64-based systems."

When I update apple driver, a pop-up error message "The folder you specified doesn't contain a compatible driver for your device. If the foldre contains a driver, make sure it is designed to work with Windows for x64-based systems."

Hi,
Please also check Event Viewer if it identify this problem.
In addition, also check Device Manager, if similar driver already installed, try to uninstall them and reinstall new driver again for test.
Roger Lu
TechNet Community Support

I'm looking for the old toolbar that doesn't double post the web adress and only has single line entries and the extension xpi doesn't work with my new computer

I'm looking for the old toolbar that doesn't double post the web adress and only has single line entries and the extension xpi doesn't work with my new computer

Mike wrote:
> Could someone tell me why this prototype-based lightbox
seems to work on one
> of my sites but not on the other?
>
> I literally took the exact same .js & css files,
copied them over from one
> site to the other, but it's only partially working on
the new site.
>
> Works :
>
http://www.roxanacampagiorni.com/
>
> Doesn't work :
>
http://www.vilverset.com/sample.html
>
> Been troubleshooting this one for days, and I'm stumped.
Script wants
> nothing to do with lightboxing HTML files on the new
site. Only straight
> JPGs. But it was written to work with them, and it
*does* work with them
> just fine on the *other* site.
>
> Where is the anomaly between the two sites that's
causing it to break in
> sample.html?
>
>
Not sure if this is relevant but on the page that works you
have these
js files linked - 4.....
<script type="text/javascript"
src="/scripts/jscripts.js"></script>
<script type="text/javascript"
src="/scripts/prototype.js"></script>
<script type="text/javascript"
src="/scripts/effects.js"></script>
<script type="text/javascript"
src="/scripts/control.modal.2.2.3.js"></script>
and on the page that doesn't - 3......
<script type="text/javascript"
src="/scripts/prototype.js"></script>
<script type="text/javascript"
src="/scripts/effects.js"></script>
<script type="text/javascript"
src="/scripts/control.modal.2.2.3.js"></script>
HTT
chin chin
Sinclair

Male to male audio cable for car doesn't work with my iphone 4s?

I have a 3.5 mm male to male cable that I have used in my car so I can listen to my music. It works fine with my iphone 3G, but it doesn't work with the new 4s. Is there a special cable I need to use with it? It's weird, because my earbuds work with either iphone, but not the audio cable. Suggestions??

I have the exact same issue with my new 4S.
I haven't find a solution yet.

Office OneNote 2013 working with OneDrive for Business

M$ is going to be the death of me.
So here's what I have Windows 8.1 Pro with Office 2013 Pro with OneDrive for Business with our own SharePoint 2013 environment running on a tablet.
I open this lovely OneNote Product and all it asks me is to sign into my M$ Account, I don't want to use my M$ account I want it to just open and allow me to create a new notebook... It just asks me to sign into my M$ account. I don't want to
do that.
So I got into my SharePoint document library,click New document, create onenote document, open it and OneNote prompts me to log into my M$ account....
I don't want to use my M$ account, I want to use my OneDrive For Business and the SharePoint 2013 environment we've paid thousands of dollars for...
Another funny thing I found is, OneNote 2013 for Mac, works with OneDrive for Business?!?! On Windows? NOPE!
Am I missing something simple?

Hi,
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

[SOLVED] Xmonad: trasparency doesn't work with compton intel

Dear All,
I am having a strange issue with Xmonad and I am not sure whether it is a problem of my Arch or Xmonad configuration. I decided to ask on Arch forum first, as my other computer running Arch has exactly the same Xmonad setup and it works fine. I would appreciate assistance from some Xmonad or Arch proficient users on this.
Basically, I have this piece of code in my xmonad.hs:
myLogHook :: Handle -> X ()
, logHook = myLogHook dzenLeftBar >> fadeInactiveLogHook 0.8
On the other computer this makes all the unfocused windowses slightly transparent. I find this feature very useful as it helps me focus on the window I am working with.
For some reason this doesn't work on my laptop. My laptop is using xf86-video-intel since the lspci gave me
%lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 03)
Also I am invoking compton-git from AUR but I have also tried with xcompmgr in my xinitrc and it gave exactly the same result - no transparency whatsoever.
I looked through my log file, but couldn't find anything relevant (please let me know if you can think of anything). How do I proceed with this issue? Do I try different composite managers? Do I try different drivers? Is there anyhting in X setup that I should include? Please let me know if you have any ideas.
Last edited by AlmostSurelyRob (2013-06-18 10:18:08)

I am very sorry. I've just discovered that neither compton nor xcompmgr were installed. It's not only solved, it should be marked as [NOT RAISED]. I was migrating my configuration and overlooked some erm... details.

HT201210 hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

TS1253 I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

What have you tried?
You are going to get nowhere quick with the 6.1 utility in Mountain Lion if this is the only OS you have available.
Look up how to install 5.6 utility under ML. At least then you can see printers. That is assuming you are trying to use USB.
Has this worked ever on Mountain Lion? Did you download the drivers for that printer for ML?
Plug it into a computer directly.. does it work? If it doesn't work locally it sure will not work via the network.

My i pod nano first generation doesn't work with windows 8

My i pod nano first generation doesn't work with windows 8

Howdy yvesmd,
Thanks for using the Apple Support Communities.
If your iPod nano is not being recognized in iTunes on your Windows computer, then I'd like you to please follow the directions in the link below.
Apple - Support - iPod - iPod nano Troubleshooting
Cheers,
Alex H.

Fullscreen doesn't work with Silverlight for Netflix movies

Similar Messages

Maybe you are looking for