Fullscreen games not broadcasting.

FMLE works great for me most of the time. The only thing I have a problem with is fullscreen games. My PC is pretty fast so I can run most of my games in win mode with no problems but some dont let u run them in windows.
When I try to broadcast a fullscreen game it just shows my desktop, as if the game is not there, but I dont see any check box or conig settings that would let me change this.
Anyone els have this issue?

Which screen capture software are you using? This seems to be a config problem with the screen capture software or the machine. Try changing the screen capture software also.

Similar Messages

Refresh rate going to 60Hz when leaving fullscreen games

i am using nvidia blob drivers on a single monitor setup - they're working fine except that often (always?) when i am leaving openGL fullscreen game, the refresh rate defaults to 60 (from 75 Hz). anyone knows how to fix this? thanks, jose

R00KIE wrote:Your card seems to support dvi, your monitor supports dvi and a dvi cable should have come with it. Any reason why you're not using the dvi interface?
this is actually a very good question. i used to have this connected via vga because of second monitor on dvi in my past multiheaded setup but now that i got rid of it.. i completely forgot about using vga. i switched to dvi now and i think the situation is now better - will need to test a few games though. this is how xrandr output looks now:
$ xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 320 x 175, current 1280 x 1024, maximum 1280 x 1024
default connected 1280x1024+0+0 0mm x 0mm
1280x1024 50.0* 51.0
1280x960 52.0
1152x864 53.0
1024x768 54.0 55.0 56.0 57.0 58.0 59.0
960x720 60.0
928x696 61.0
896x672 62.0 63.0
832x624 64.0
800x600 65.0 66.0 67.0 68.0 69.0 70.0 71.0 72.0 73.0 74.0
720x400 75.0
700x525 76.0 77.0
640x512 78.0 79.0 80.0
640x480 81.0 82.0 83.0 84.0 85.0 86.0 87.0 88.0
640x400 89.0
640x350 90.0
576x432 91.0
512x384 92.0 93.0 94.0 95.0 96.0
416x312 97.0
400x300 98.0 99.0 100.0 101.0 102.0
360x200 103.0
320x240 104.0 105.0 106.0 107.0
320x200 108.0
320x175 109.0

MLB Extra Innings - why are all games not in high definition?

We just switched from DIRECTV to Xfinity and are dismayed that many MLB Extra Innings games are not broadcast in High Def. Heck, the main reason we got an HDTV was to watch the baseball games and now, with Comcast, so many are poorer quality non-HD. DIRECTV had them in High Def, so we know its available. When will Comcast/Xfinity start broadcasting ALL of these subscription games in HD?

lawnguru wrote:
Do you have the correct settings on the box? I had to change some on mine. Have you selected the correct channel?
Comcast rebroadcasts the signal. They can't make it HD if it doesn't come that way!
I would be very surprised if some are SD, while others are HD, but I could be wrong.I have 2 extra innings channels in HD, but 12 in SD...

Fullscreen Games and tint2

Hi, I'm using openbox and I'm having issues with my panel and fullscreen apps. When I change desktops with my fullscreen game in focus (and on top of tint2), then change back to the desktop with the game, the game is in focus as it should be but tint2 is now above it. How can I get it such that my games stay above tint2?
Here's my tint2rc:
# TINT2 CONFIG FILE
# BACKGROUND AND BORDER
rounded = 0
border_width = 0
background_color = #000000 100
border_color = #ffffff 18
rounded = 1
border_width = 0
background_color = #ffffff 40
border_color = #ffffff 18
rounded = 1
border_width = 0
background_color = #ffffff 20
border_color = #ffffff 18
# PANEL
panel_monitor = 1
panel_position = top center
panel_size = 100% 30
panel_margin = 0 0
panel_padding = 7 0
font_shadow = 0
panel_background_id = 1
wm_menu = 0
panel_dock = 0
panel_layer = top
# TASKBAR
#taskbar_mode = multi_desktop
taskbar_mode = single_desktop
taskbar_padding = 2 3 2
taskbar_background_id = 1
#taskbar_active_background_id = 0
# TASKS
task_icon = 1
task_text = 1
task_maximum_size = 140 35
task_centered = 1
task_padding = 6 3
task_font = sans 7
task_font_color = #ffffff 70
task_background_id = 3
task_icon_asb = 100 0 0
# replace STATUS by 'urgent', 'active' or 'iconfied'
#task_STATUS_background_id = 2
#task_STATUS_font_color = #ffffff 85
#task_STATUS_icon_asb = 100 0 0
# example:
task_active_background_id = 2
task_active_font_color = #ffffff 85
task_active_icon_asb = 100 0 0
urgent_nb_of_blink = 8
# SYSTRAYBAR
systray = 1
systray_padding = 0 4 5
systray_background_id = 1
systray_sort = left2right
systray_icon_size = 0
systray_icon_asb = 100 0 0
# CLOCK
time1_format = %a %b %d, %Y %r
time1_font = sans 8
clock_font_color = #ffffff 76
clock_padding = 1 0
clock_background_id = 1
clock_lclick_command = oragetask
clock_rclick_command = oragetask
#clock_tooltip = %A %d %B
#time1_timezone = :US/Hawaii
#time2_timezone = :Europe/Berlin
#clock_tooltip_timezone = :/usr/share/zoneinfo/Europe/Paris
# BATTERY
battery = 1
battery_hide = 98
battery_low_status = 10
battery_low_cmd = notify-send "Battery Low"
bat1_font = sans 8
bat2_font = sans 6
battery_font_color = #ffffff 76
battery_padding = 1 0
battery_background_id = 1
# TOOLTIP
tooltip = 0
tooltip_padding = 2 2
tooltip_show_timeout = 0.7
tooltip_hide_timeout = 0.3
tooltip_background_id = 1
tooltip_font_color = #OOOOOO 80
tooltip_font = sans 10
# MOUSE ACTION ON TASK
mouse_middle = close
mouse_right = none
mouse_scroll_up = toggle
mouse_scroll_down = iconify
# AUTOHIDE OPTIONS
autohide = 0
autohide_show_timeout = 0.3
autohide_hide_timeout = 2
autohide_height = 4
strut_policy = minimum
And the relevant section of my openbox rc.xml:
<application name="hl.exe" >
<focus>yes</focus>
<maximized>yes</maximized>
<layer>above</layer>
<desktop>2</desktop>
</application>
Last edited by iamsmrt (2010-07-14 01:29:36)

another try :
panel_dock = 1
;; from http://code.google.com/p/tint2/wiki/Configure
;; panel_dock = boolean (0 or 1) : Put tint2 into the window managers dock. For the openbox window manager I can advise to use also a modifier for the moveButton option, otherwise ;; the mouse click is not forwarded to tint2 (in ~/.config/openbox/rc.xml).

I have a Macbook Pro and have just purchased a GSP hidden objects game. It says on the box that it is compatible and when I try and install it it tells me that installation has been successful. However, it then says that PowerPC games not supported. Help?

I have a Macbook Pro and have just purchased a GSP hidden objects game. It says on the box that it is compatible and when I try and install it it tells me that installation has been successful. However, it then says that PowerPC games not supported. Help?
No game icon appears on my desktop and I don't know what I can do.
Really ****** off as i've not played these games since switching from a windows PC to a Mac and was really excited!! All I want is to be able to play my new game that arrived in the post today. If anyone can help I would be really really grateful....
The game says that it needs Mac OS X 10.3 or higher to run so I don't understand what the problem is or how I can fix it!!

beckyj3,
the last version of Mac OS X which supported running PowerPC apps on Intel Macs was Mac OS X 10.6.8 (Snow Leopard). If you’d like to play this PowerPC game on your Intel MacBook Pro, then you’ll need to install Snow Leopard on it and boot into Snow Leopard. (Note that the last MacBook Pro which natively supported Snow Leopard was the Early 2011 model.)
The game was almost certainly published before Mac OS X 10.7 (Lion) was released, so back then, all versions of “Mac OS X 10.3 or higher” would have supported running that PowerPC game.

Commit events are not broadcast because no JMS Transport is available.

Just set up a new WebLogic 10.3.2 domain and I am seeing this while starting the Admin Server:
<Mar 1, 2010 6:37:03 PM CST> <Error> <Security> <BEA-000000> <Commit events are not broadcast because no JMS Transport is available. Remote L2 caches will be out of sync.>
anyone have any idea what this is and what's causing it?

Hi,
I followed the instructions given under " Configure the RDBMS security store " ( Step 6 ) and restarted my Server. :-
+6. In the section labeled Server Synchronization Configuration, specify the appropriate settings for JNDI and JMS so that the RDBMS security store can cache database information in memory correctly. If the RDBMS is running in more than one JVM -- for example, the domain has multiple servers, or other Oracle products are sharing the same RDBMS store with the new domain -- these caches must be synchronized to ensure the integrity of the security data.+
To configure server synchronization:
+1. Specify a JNDI user name and password. This can be any valid user in the security realm who has access to JNDI.+
+2. Create a JMS topic. You may reuse an existing one, if desired. For information, see Configure topics.+
Caution: Failure to configure JMS notifications in a multiserver domain in which the RDBMS security store is configured may result in a security vulnerability.
+7. Click Save.+
+8. To activate these changes, in the Change Center of the Administration Console, click Activate Changes.+
Not all changes take effect immediately—some require a restart (see Use the Change Center).
However, I still see the same error :-
*+<Error> <Security> <BEA-000000> <Commit events are not broadcast because no JMS Transport is available. Remote L2 caches will be out of sync.>+*
Am I missing something ?
Thanks,
Sandeep Seshan

Getting my F4580 to connect to my network thats not broadcasting it's SSID

I'm an Apple Mac user, I'm trying to connect my Deskjet F4580 to connect to my network wirelessly.
I am using a Belkin Pre N1 Wireless Router, which is set not to broadcast it's SSID.
I've tried entering the SSID manually on the setup for the F4580, but it can't see it. I do want to start broadcasting the SSID due to security issues.
How do I get the two speaking to one another.
Thanks in advance
Arbroathsmokie
This question was solved.
View Solution.

Broadcast your SSID. Not broadcasting it is not a security measure. At all. There is freeware on the internet that can read your SSID whether you are broadcasting or not. Read more here.
Use WPA or WPA2 (not WEP which can also be broken with freeware) encryption with a strong password and enjoy more security and less hassle than you have now.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

GCU 20% off on game not applied

i went to best buy today and got halo wars and my 20% off never applied. they even scanned my card first. so i told the cashier that i'm GCU i should get my 20% off. so he asked one of the guys and he said only on new games not games on sale. that makes no sense but he said he knows the rules and regulation. so i said whatever and left. so my question is is he right and if he is nt what shouls i do to get my 20% off.
thanks

Hello oliver2788,
Thank you for purchasing your games from Best Buy, and thank you for being an Unlocked member. I'll be happy to answer your questions today.
The Unlocked discount is set up to stack with sales prices on new games, so I am sorry that you were not awarded this bonus in the store when you purchased your game. As your My Best Buy card was scanned into the transaction, my guess is that the register simply wasn't communicating with the My Best Buy program as it should.
I would be happy to discuss the missing bonus with you, and I will send you a private message with more information. Please watch for that message shortly.
Best regards,
Mike|Social Media Specialist | Best Buy® Corporate
Private Message

Why is the game Candy Crush Saga, a free game, not available in the South Africa store?

Why is the game Candy Crush Saga, a free game, not available in the South Africa store?

Read this thread where Steff South Africa, an apparently knowledgable user, has explained the situation as it stands:
https://discussions.apple.com/thread/4159223
Regards.

All SSIDs are not broadcasting...

I have a serious issue with my Cisco 4404 WLC. In from WLC, only some SSIDs are broadcasting the others are not broadcasting.... If I make a new WLAN and select it as broadcasting, but its not broadcasting correctly. I cannot see this in my device. What can be reason? Is there any restriction to the number of broadcasting SSIDs.

That's too many SSID's.... 3-4 is max I would go. What I would do is make sure your not using AP Groups and if you are, then make sure all the WLANS are in the ap group. WLAN ID 1-16 will be the only SSID's that are broadcasted on the AP, and WLAN 17 and up will not be and you will need to use ap groups for that. If this is all fine, then delete the ssid that is the issue and recreate it. You might have too many beacons in the air causing the clients not to see certain ones.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

Portal Example Server problem: Commit events are not broadcast no JMS

Hi experts!
I've installed the Oracle WebLogic Portal 10gR3 (10.3.2) on the Windows XP machine:
http://www.oracle.com/technetwork/middleware/weblogic-portal/downloads/index-092352.html
I followed by http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/samples/dvt-sample.html
- installed the Portal Examples
- Start > All Programs > Oracle Products > WebLogic Portal > Examples > Start Example Server.
but my server was staying in RUNNING mode and threw errors....
<Errors> <Security> <BEA-000000> <Commit events are not broadcast because no JMS Transport is available. Remote L2 caches will be out of sync.>
What should I do?
Edited by: Averyanov on Oct 1, 2010 5:40 AM
Edited by: Averyanov on Oct 1, 2010 5:40 AM
Edited by: Averyanov on Oct 1, 2010 5:44 AM

Hi,
I followed the instructions given under " Configure the RDBMS security store " ( Step 6 ) and restarted my Server. :-
+6. In the section labeled Server Synchronization Configuration, specify the appropriate settings for JNDI and JMS so that the RDBMS security store can cache database information in memory correctly. If the RDBMS is running in more than one JVM -- for example, the domain has multiple servers, or other Oracle products are sharing the same RDBMS store with the new domain -- these caches must be synchronized to ensure the integrity of the security data.+
To configure server synchronization:
+1. Specify a JNDI user name and password. This can be any valid user in the security realm who has access to JNDI.+
+2. Create a JMS topic. You may reuse an existing one, if desired. For information, see Configure topics.+
Caution: Failure to configure JMS notifications in a multiserver domain in which the RDBMS security store is configured may result in a security vulnerability.
+7. Click Save.+
+8. To activate these changes, in the Change Center of the Administration Console, click Activate Changes.+
Not all changes take effect immediately—some require a restart (see Use the Change Center).
However, I still see the same error :-
*+<Error> <Security> <BEA-000000> <Commit events are not broadcast because no JMS Transport is available. Remote L2 caches will be out of sync.>+*
Am I missing something ?
Thanks,
Sandeep Seshan

Does Samsung Galaxy III phones recognized WiFi that does not broadcast SSID?

I recently purchased Samsung Galaxy III phone. At home, I turned on WiFi SSID broadcast on the router to set up phone to connect to router. I then turned off SSID broadcast on router, and phone no longer connects to WiFi. I understand security is better when SSID is not broadcasting, but this phone will not connect now. Apple products connects just fine. Why will the phone not connect to a router that does not broadcast SSID event when the information is programmed into the phone?

what revision Actiontec do you have, can you check the service Tag? it will say REV A, B, C, D etc.....
Also you can verify you are doing the right one by logging in at www.verizon.com/repair and clicking "
Retrieve your Wi-Fi Security Key"

SSID not Broadcasting after reload

Hi all,
I have Build a 5508-HA Cluster (7.4.100.0) , hat to reboot this cluster due to Licens install.
After the reboot atleast one of the SSIDs was not broadcasting anymore, even the checkbox was checked.
What did I do:
Installed the Licenses @ Freiday 12:00
@17:15 reload active WLC, wait till controller is up again (a few minutes pingable)
@17:25 force failover to first controller.
check a few SSIDs but not all, those who where check are ok.
@monday 07:00 clients complaining not seeing the SSID (some where connected)
hat somebody the same problem?
is this a known problem?
How to avoid this problem?
Thanks
Willem

I'm not sure it was only one SSID that hat problems.
The first messages was that one (1) SSID was not broadcasting and atleast one was broadcasting (no statement about the others).
The customer tells me now that e few other SSID where also not broacasting.
Can I check on PI 1.2.1 if a SSID was Broadcasting?

Yahoo fantasy sports player game notes are no longer visible

I use yahoo fantasy sports, and have used firefox browsers for the last two years, as of last thursday (12/20/12) my player game notes are not showing up. The link is there but it is not visible. I checked on IE9 and they are fine. The only changes on my system during that time, I had installed Adobe Photoshop elements 11 and then uninstalled it. Please help me fix this or I will have to use IE9 from now on because i need to see those notes. I love Firefox and do not wish to change.

Be careful with using the same profile with different Firefox versions
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
You can also try to reset Firefox:
*https://support.mozilla.org/kb/Basic+Troubleshooting

AP not broadcasting SSIDs

Hi All,
This looks like an easy task but I cant get it to work.
We moved an AP from one room to another one and now it is not broadcasting the SSIDs. The AP is an 1131 AG.
The front unit led is solid red(before it was blue), the ethernet led is green blinking, and the radio led is off.
I can see the AP on the WLC and it has a static IP and everything.
The switch sees it as CDP neighbor and the switchport is configured as trunk.
Dont know what else to check.
Thanks
Raga

A 2960.
If you plugged the AP directly to the switch and it works, then chances are your horizontal cabling could be "funny".
The 2960 has a built-in TDR that will help you determine this.
Command combo:
1. test cable tdr interface ;
2. wait for about 5 to 7 seconds for the test to run;
3. sh cable tdr int
I recommend you plug the AP to it's original position and from the patch panel, plug the AP to Gig0/1 or Gig0/2. When you do this, make sure you enter the command "media rj" first before running the test. When you have concluded yoru test, run the command "media auto".

Fullscreen games not broadcasting.

Similar Messages

Maybe you are looking for