Fully updated capture image - how to?

Hi all
I am using 1 task sequence to build & capture my reference image. What I want is to deploy win7, ie9 & office 2013 with my ref. image for sccm 2012.
also.. I want the image to be fully updated when it is captured.
When I run the TS I have 1 step for pre application win Update and 1 for post-application .
but after the capture and when I use the wim file.. it still finds a lot more updates..
can I somehow make sure it updates the reference image completely?
So I use MDT to build the reference image on a VDI and then deploy the wim with SCCM.
In SCCM I can do multiple steps of windows update by using the command:
WMIC /namespace:\\root\ccm path sms_client CALL TriggerSchedule "{00000000-0000-0000-0000-000000000113}" /NOINTERACTIVE
Which resets the windows update "cache" or whatever you want to call it.. it clears the update-list from the local machine and then searches again.
but how can I do something similar in MDT?
Kindest regards, Martin

Hi Keith.
Thank you for your response.
I created the image yesterday and tested today.. and it is adding lots & lots of updates.. I seriously don't believe that wsus just happened to find 1Gb worth of updates from yesterday till today.
It is updating windows 7 & office 2013 mainly.
as I understand win update will run and keep a list/cache which it then uses the next time..
I am referring to what I read here:
http://www.david-obrien.net/2013/01/23/trigger-software-updates-rescan-in-configuration-manager-2012-sp1/
during the Task Sequence I run several updates/reboot/clear cache and during the first 3 update runs it finds new updates..
Kindest regards, Martin

Similar Messages

WDS & DISM: injecting updates into a captured image

Hello,
I have been working on this for a few days now. Finally, I found a good article on using 'dism' to inject windows updates into 'wim' file. The whole process seemed to have gone well until after I used the image to setup a new computer.
The original captured image has 183 updates installed. After running the prescribed 'dism' commands, I blasted the image onto a box, checked the number of installed updates, but the number stayed the same: 183.
I have a computer with all the recent updates based on the same captured image. That computer shows 300+ updates installed. I used its c:\windows\softwaredistribution\download folder with 'dism' to update the image.
So, the issue is: even though 'dism' says it did the job, the image is still not updated and only showing 183 updates.
Anyone else seen this before? Thank you.

Hi,
Which guide did you refer and how did you do?
Please do not use c:\windows\softwaredistribution\download folder directly to inject to image.
Please download the full Windows Update packages into a new folder and then follow the below guide to apply it:
Apply Updates to an Image Using DISM (Standard 7 SP1)
http://msdn.microsoft.com/en-us/library/ff794819.aspx
Applying Windows Updates to a base WIM using DISM and Powershell
http://blogs.technet.com/b/configmgrdogs/archive/2012/02/15/applying-windows-updates-to-a-base-wim-using-dism-and-powershell.aspx
Karen Hu
TechNet Community Support

How do I update Date Time Digitized to match an updated Capture Time for a DNG file?

I am updating capture time based on GPS Time (a bit OCD, I know) but when I change Capture Time the Date Time Digitized value does not change. This in in LR 4.3 and is not affected by whether on not the Catalog is set to 'Write date or time changes into proprietary raw files'. Maybe this is a problem for DNG files only.

GreSep wrote: I saw another LR discussion that said that with LR 4.3 updating Capture Time would also update Date Time Digitized but it does not do so for me on my DNGs (and as of last month ALL my images were converted to DNGs).
One or two intermediate versions of LR 3 (perhaps Lr 3.6) set DateTimeDigitized when you gave the Metadata > Edit Capture Time command. But for people managing scans in which the capture time of the original image was different than the scan time, this behavior overwrote their scan times, so Adobe backed out of that change. Before and since those versions, the Metadata > Edit Capture Time command just changes the EXIF:DateTimeOriginal and related fields in XMP and IPTC.

TS3274 If I touch camera icon, the screen turns black instead of capturing image. Let me know how to troubleshoot.

If I touch camera icon, the screen turns black instead of capturing image. Let me know how to troubleshoot?

Try closing the Camera app:
1. Double-click the Home button to reveal the Task Bar
2. Hold down the Camera app for a second or two until you see the minus sign
3. Tap the minus sign to close app
4. Tap area above Task Bar to return to Home screen
If the above doesn't solve the problem, do a reset:
Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider

The apps wont open but are fully updated in the creative cloud manager menu, how do I get them to open?

the apps wont open but are fully updated in the creative cloud manager menu, how do I get them to open?

I have the same problem. New CC subscription. After crashing trying to open a CS6 file. Premiere Pro will not launch. I have updated video drivers and Quick Time player. (PC, Windows 8.1. nVidia GeForce GT 750M) "Sorry a serious error has occurred that requires Adobe Premiere Pro to shut down..." Thanks.

HT4505 I see my scanned picture in image capture but how do you get it to iPhoto?

I can see my scanned picture in image capture but how do you het it in iPhoto or on your desktop?

Hello:
It has options to "scan to..." If I scan using Image Capture, I scan it to the desktop (jpeg). If you want to get it into iPhoto, open iPhoto and import the picture.
Barry

A client has sent me an indesign file I cannot open. She says she has updated to Indesign CC 2014. I am a CC member and fully updated my own software but cannot open the file she has sent me, not even if she saves as an IDML, how do I resolve the problem?

A client has sent me an indesign file I cannot open. She says she has updated to Indesign CC 2014. I am a CC member and fully updated my own software but cannot open the file she has sent me, not even if she saves as an IDML, how do I resolve the problem?

There are a few things to try.
First, if this file came to you vial email attachment, it could have been corrupted. Ask her to zip the file and send it again. That sometimes helps.
I suppose there's a chance that the file is already zipped, so see if that's the case and unzip it if so.
If the file name doesn't end with .indd, add it and see if that helps.
If you are double-clicking, try File>Open from within InDesign.
Last (and I know this sounds like a joke, but I've seen it many times), sometimes people attach a Mac Alias or Windows Shortcut instead of the actual file. What is the file size? If it's really small, that might be the reason.
Also, no offense intended if some of this sounds like stuff you have already tried. I don't know what you know, so I'm just spit-balling.

How to save down from InDesign Creative Cloud version to CS5? Have exported as .idml file but still get messages that plug-ins are missing although CS5 confirms it is fully updated.

How to save down from InDesign Creative Cloud version to CS5? Have exported as .idml file but still get messages that plug-ins are missing although CS5 confirms it is fully updated.

Yes. Thanks. I misled myself based on another post. Successfully did this by selecting "File," "Save a copy ..." then choosing "for CS4 or later (IDML)"
It required some patience and several tries, but I think that was due to hardware (memory) being overloaded by CC Cloud version or something. It was a 50 MB, 500-page file and took 17 minutes to convert/save,
Re-capping: from CCloud to CS5, don't use "Export" (to IDML); use "Save as" or "Save a copy" and select "for CS4 or later (IDML)".
Advice much appreciated.

To turn on my ipod, I get an image of connection to iTunes, but when you update iTunes, nothing happens. I restarted the iPod manually several times peero still appears the same image. how I can make it work?

to turn on my ipod, I get an image of connection to iTunes, but when you update iTunes, nothing happens. I restarted the iPod manually several times peero still appears the same image. how I can make it work?

Restore the ipod

How to Compare Two Camera's capture Image in j2me

i want to know ,how to compare two Camera's capture image in j2me,
in my midlet application i used MMapi to access Camera.& capture two image through Camera. Then i want to store new image instead of previous one in mobile phone memory.
Please tell me how that comparing will done.
thanks in advance.

Hi,
I didn�t know about the image comparison, but here is one more idea to store the new picture, whenever you captured the picture take the time and when you take another picture compare the times of both pictures then save the picture with latest time.
But there is one flaw in this approach, if user explicitly changed the time and captured the pictures it won�t work properly.
- satdmail -

How to update an image file into existing file

how to update an image file into existing file

Hi,
So, i assume you want to change one picture. On Stage, i have edgeAnimate (an image), and
1) i am using the div tag.
So: sym.$("edgeAnimate").css("background-image", "url(images/myImage.png)" ); will change my picture.
Link: CSS properties.
More CSS:
sym.$("edgeAnimate").css( { "background-image": "url(images/myImage.png)", "background-size": "100% 100%", "background-repeat": "no-repeat", "cursor": "pointer" } );
Using a path variable:
var myPath = "images/myImage.png";
sym.$("edgeAnimate").css( { "background-image": "url("+myPath+")", "background-size":"100% 100%", "background-repeat":"no-repeat", "cursor": "pointer" } );
2) i am using the img tag.
I can add a class using Edge Animate user interface.
I choose one class name: "newImage".
So: sym.$(".newImage").css("background-image", "url(images/myImage.png)" ); will change my picture.
Note: I assumed you don’t need to preload your picture.

How capture image to max. resolution??

Im using JMF and my videocapture frame is running at 320*240.
It`s possible capture images at 800*600, 1600*1200....... of resolution??
Only its possible capture at resolution of my livevideo JFrame?
Please i need help!!!!

-Ram- wrote:
Hello,
I am able to capture images using JMF. I wrote a applet (signed) that would capture an image and save it to a folder in server.
The image is being captured with dimensions 640x480. But at the client side, they are using a webcam to capture images. I am not sure whether with that webcam, the image, when captured still gets saved with the same resolution.
How can I programatically specify to save/capture the image in a pre-defined resolution i.e. 640x480. So that whichever device is used at client side, the image still has a universal dimension.You can't guarantee that, you can only capture in whatever format the web cam will allow. If the camera doesn't support 640x480, then you're not going to be able to capture in that.
I did search the forum but have not found any significant help. Could anyone please throw some light on this?The search features of the forum are pretty poor, but if you'd searched for "changing resolution of webcam", you'd have come across...
[http://forums.sun.com/thread.jspa?forumID=28&threadID=5365494]
There is sample code for changing the resolution of a capture device... you'll have to get as close to 640x480 as you can, and then probably scale the image using Java2D stuff beyond that to guarantee the image is the correct size.

How do you update the image used for your podcast?

I just recently updated the logo for my podcast and want to know how to alter the one shown on iTunes. I use hipcast to host my podcasts and it tends to update my info on iTunes when I change it via hipcast but does not seem to be working for my pic.

Make the new image - it should be 1400 x 1400 px - and make sure to give it a different file name from the existing image, or the iTunes Store, which caches the image, won't know it's been changed.
Upload it to your server and change the URL in the feed, or make the change by whatever method you used to enter the original in Hipcast.
It's likely to take the iTunes Store quite some days to update the image, so don't panic if it doesn't update at once.

How to scan with capture image and save 10.6.8

how to scan with capture image and save 10.6.8 ?

Instructions for using Image Capture for this available via the 2nd section.
http://support.apple.com/kb/HT2502

Pictures from my Sony HDR-CX110 uploads easy in image capture but how do i upload videos? I don't even see my videos anywhere on the screen! I'm puzzled.

Pictures from my Sony HDR-CX110 uploads easy in image capture but how do i upload videos? I don't even see my videos on the screen. I'm puzzled!

Photo Stream does not do videos. For videos, you must import to your computer. You can use iPhoto to import them.

Fully updated capture image - how to?

Similar Messages

Maybe you are looking for