Func. module- RS_VARIANT_DELETE to be executed without any messages

My program has a selection-screen option to enter the range of variants and I am capturing all the variants to be deleted based on necessary conditions into an internal table and passing it to the function module RS_VARIANT_DELETE to delete those entries in the system and displaying an alv list report for the ones deleted with their numbers. It's working fine, but after the alv report displays, it is throwing an information message saying Variant 'xxx' is deleted and here 'xxxx' is only the last entry in the internal table. I want to ignore this message and do not want this to be displayed in the output. Please suggest a way to do that

Variant & is deleted is the Status Message. If you have the settings on to show Status message as information message, you will see this message as Info message. It can be found at GUI Options > Interaction Design > Notification > Show Success message in Dialog box
Code lines of the RS_VARIANT_DELETE where it gives the delete message:
ENDIF.
ENDIF.
MESSAGE S618 WITH RSVAR-VARIANT. " <<
PERFORM DEQ_VARIANT using rsvar-report rsvar-variant.
CLEAR: C_SYSVAR, QUERY_SYSVAR.
VARIANT = RSVAR-VARIANT.
Regards,
Naimesh Patel

Similar Messages

HPDM Update/Install Jobs on ThinClient ShutDown without any "Message"

Hello,
I want to send Update/Install jobs to our ThinClients which should be executed on "Shutdown" of the ThinClients.
There is the possibility to check the box task deferment but if I check this box and send the task to the ThinClient, the user gets always an HPDM Message with the Job which can be delayed for the configured time, or to install/reboot directly.
I dont want any informations. For example, I'll send a task to the thin client at 1pm and configure that this task sould run on shutdown of the thin client (normally the shutdown of the thinclient happens, if the user goes home from work), so the job can run after finishing time. So I won't disturb any users, and the jobs always runs after the user went home.
I know, I could plan a job with wake on lan, but I've always trouble with wol. There are a lot of thinclients which are connected via VPN or something else... A wol packet wont reach this clients.
Is it possible to send a "delayed" job without any informations ?
Thanks and regards,

Hey,
I have posted a thread regarding the same issue.
I have run the update myself (both for WinDVD Playback v5 & WinDVD Creator v3) from the System Update utility.
Both reported as installed successfully on the System Update "Installed Updates" log though the update for WinDVD Creator v3 keeps showing up on the available updates.
The version i currently have is version 3 so i guess the update went through, the path: C:\Program Files\InterVideo\WCreator3 - so y does it keep popping up on the available updates?

Weird : Database Hangs without any message in Alert File

Hi
We have production database 10.2.0 , in the last 3 days database database has to be restarted as it hangs without any information in the Alert File.
No trace file is genrated at that time.
Only SYS user Can LOGIN to the database.
I had no other option but to restart
Database is in NO ARCHIVE MODE
There is Enough Space in Temporary Tablespace and all other tablespace.
NO patches were applied to the database
NO parameters has been modified
When i check the CPU usage its normal.
There is Enough Disk Space.
This is procution and i apreciate Help.
Thank You

user6421665 wrote:
Only SYS user Can LOGIN to the database.
What is the OS ? Windows --> Did you check virus scan or some other process running during that time ?
Unix / Linux --> Is sysadmin running a defrag on the disks or some other OS Utility ?
Do you login as SYS from the server ? Can you login as any other user from the server ?
Hang == Slow ?
>
This is procution and i apreciate Help.
Production database in NOARCHIVE log mode... is interesting by itself, but that is not a question here.

Dynamic config for attachment without any message mapping in mail adapter

Hi,
In our scenario, we are not using any message mapping as a specification.A fixed length file is sent from source via proxy as an attachment to the mail.
here the issue is with the file name of the attachment. how do we configure the attachment file name dynamically with out using any message maping.
Regards,
Divya

Hi Divya,
I understand you want to set name for mail attachment.
SAP Note: Mail Adapter sapnote_0000856599
Q: Can I choose the name of an attachment in the mail?
A: Yes. Most mail clients use some heuristics based on some *MIME headers to derive the name of an attachment.* The MIME headers involved in most heuristics are Content-Type, Content-Description,and Content-Disposition. When you create an XI message, the XI payload name is automatically set in the Content-Description. If you want to change or set all of these headers, you can use the MessageTransformBean module (Note 793922) [Link|http://help.sap.com/saphelp_nwpi711/helpdata/en/57/0b2c4142aef623e10000000a155106/frameset.htm]
in the adapter framework.
Q: How can I set the file name of a mail attachment?
There are several MIME headers that play a role in how the client retrieves the file name of an attachment. Unfortunately, this behavior differs among various mail clients. The reason for this inconsistent behavior comes from the fact that this mechanism has been extended incrementally. The old way is to use the name parameter in the Content-Type header as specified in RFC1341. For example, you can set the content type of an XML attachment as:
Content-Type: application/xml; name="abc.xml"
RFC1521 discourages the use of this name parameter in anticipation of the new header Content-Disposition, which is defined in RFC1806.
With this Content-Disposition header, you can set the file name as:
Content-Disposition: attachment; filename="abc.xml"
Some clients may show the Content-Description value as the file name. The Content-Description header is typically used to associate some descriptive information to an attachment (RFC1341) as in
Content-Description: my xml file
To avoid potential interpretation problems, it is recommended to combine the use of these headers.
Regards,
Raghu_Vamsee
Edited by: Raghu Vamsee on Feb 3, 2011 12:23 PM

Ifs Exception without any message

Hi,
I have a method which tries to retrieve an object from the ifs and updates some attributes on the object and commits it.
An exception as below is thrown intermitently, not sure what exactly is the reason, since the iFS exception message does not contain enough info.
oracle.ifs.common.IfsException: IFS-68004: Message unavailable: :3802628
Could you please let me know what exactly does the above error msg indicate, any clue on what exactly could be the problem ?
Thanks in advance,

I believe the error is documented in the javadoc for the IfsFileSystem class. The documentation states:
"throws IfsException(68004) - if folderPath is not found
So that means that the path you're passing as an argument to one of the methods is not correct.
If you put the following line of code at the top of your program:
IfsException.setVerboseMessage(true);
and then catch the IfsException and print its stack trace, you will probably get more information. If you're still stuck, please post this stack trace and we'll take a look.

Application launches and immediately quits without any message

I have an old powerbook G4 which I use for only one purpose- to run Mathcad 6 in the Classic environment. (Mathsoft discontinued supporting Macs many years ago so I'm stuck.)
Today I started it up, launched Mathcad, it flashes its startup window then disappears and I'm back in OS X. Other Classic applications run OK.
I seem to remember this happening many years ago with an application, but cannot at all remember what it took to fix it. This particular application has been running flawlessly for me, but now I can't get it to do anything more than flash the startup screen for a second and then quit.
Any suggestions will be greatly appreciated!
George O.

{quote:title=Simon Teale wrote:}
Top 2 tips,
2. Increase the memory allocation in MathCad.
1. Reduce the screen colours to 256 or thousands.{quote}
God tips, Simon. However, setting monitor resolutions may have actually been a culprit in corrupting a preference file for the Classic Application.
Recently I just acquired a Dell monitor replacement for my G3, and when I went and changed monitor settings and graphics options the graphics for the App. to optimize it it got corrupted. I tried and tried resetting monitor and graphics settings to no avail of the corrupted graphics. Finally I remembered to trash the preference file for the app. and restarted and it was fine.
[Here|http://docs.info.apple.com/article.html?artnum=61528] is the article about
memory allocation for Classic. I generally set my higher demanding applications
using the Apple menu calculator to 3Xs the Suggested Size in the Preferred Size and 2Xs the Suggested in Minimum Size. You can do this really easy too by Copying
and pasting within Classic Calculator and using the keyboard instead of the mouse
for Classics small calculator.
!http://img189.imageshack.us/img189/6584/mikemsigq.png!

Device rebbot without any message

Hi,
I can't find where it comes from but I have problems with one update that
makes devices to reboot with any warning.
Does someone haveing the same issue ?
If yes, what update(s) make the device to reboot ?
Thanks.

For us, it's the WinLogon process that as initiated the restart of our
computers.
Why ??? We are looking for it...
"Jim Koerner" <[email protected]> a crit dans le message de groupe de
discussion : iI4Wn.34072$[email protected]..
> Checkout the 'ZCM 10.3- XP patch install force reboot - need to suppress'
> thread and see if this is what affecting you too.
>
> Jim Koerner
>
> "Normand" <[email protected]> wrote in message
> news:vF2Wn.34051$[email protected]. .
>> Hi,
>> I can't find where it comes from but I have problems with one update that
>> makes devices to reboot with any warning.
>> Does someone haveing the same issue ?
>> If yes, what update(s) make the device to reboot ?
>> Thanks.
>

Connection 8.5(1)SU2 and Full Mailbox NDR turns on MWI without any message

I called a co-worker whose Connection 8.5(1)SU2 mailbox was full. I recieved an e-mail indicating that his voice mailbox is full (we use Single Inbox/EWS Exchange 2007SP1), then my voicemail light on my Cisco phone illuminated and it indicated that I had one new voice message available. No one actually left me a message.
Why did the MWI light turn on when I got the NDR?

Cisco TME told me NDR is a message (text), if you don’t have the conversation selected to list NDR’s it won’t read them out via the TUI. By default it does not. However I can't figure out if this is something you can turn on.

Regarding func module

Hello all,,
Is there a way, that we could know that a particular functional module is used in different programs.
Could we get the different programs, where a particular func module is used?
Is there any table or any techniques?
Please suggest..
Thanks in adv,
Naveena.

Hi
Run trx SE37 and press the icon to check where it's used, anyway u can't find out the program where the fm is called dimanycally
Max
Edited by: max bianchi on Mar 27, 2008 12:50 PM

Reader XI installation exits without any error on XP

Hello,
I'm trying to upgrade Adobe Reader XI on Windows XP SP3 but the installer just exits without any messages after unpacking installation files. I tried both net and full installer (AdbeRdr11000_xxx.exe). Uninstalling Reader X didn't help, but I am able to reinstall it.
Any ideas what might be going on?

Try AdbeRdr11000_en_US.msi fromftp://ftp.adobe.com/pub/adobe/reader/win/11.x/11.0.00/en_US/
Make sure you are using .msi
After installation, select Help\Check for updates, and let Updater to install latest updates.

Oracle XE 10g install fails without any error or message

Hi,
I searched many posts in this form, and could not find an answer to my problem.
Trying to install XE on a server 2003. Installation proceeds successfully almost to an end, and then installation window disappears, without any message, error or warning.
New ORACLE_HOME, created up to this point, also disappears.
Logfile has the following entries, C:\WINDOWS\OracleDatabaseXEServerInstall.log:
MSI (s) (F8:C0) [16:04:44:540]: Note: 1: 1708
MSI (s) (F8:C0) [16:04:44:540]: Product: Oracle Database 10g Express Edition -- Installation operation failed.
I know that the server is behind the firewall, and does not have connection to the internet. It is connected to the network, and other servers and desktops, though.
Does it have to have access to the outside world to install XE?

Hi,
I am having the same issue, both on a windows 2003 server and on a XP client PC. The installation progresses up to a point after which the installation window disappears without errors or messages. I tried as a domain administrator, as a local administrator and removed other Oracle software, rebooted, checked for virus scanners etcetera, withou result.
I searched through the forums but could not find a solution.
Any idea's?
Regards,
Gerrit
Hi,
I searched many posts in this form, and could not
find an answer to my problem.
Trying to install XE on a server 2003. Installation
proceeds successfully almost to an end, and then
installation window disappears, without any message,
error or warning.
New ORACLE_HOME, created up to this point, also
disappears.
Logfile has the following entries,
C:\WINDOWS\OracleDatabaseXEServerInstall.log:
MSI (s) (F8:C0) [16:04:44:540]: Note: 1: 1708
MSI (s) (F8:C0) [16:04:44:540]: Product: Oracle
Database 10g Express Edition -- Installation
operation failed.
I know that the server is behind the firewall, and
does not have connection to the internet. It is
connected to the network, and other servers and
desktops, though.
Does it have to have access to the outside world to
install XE?

Weblogic server 7 sp4 stopped without error message

Hi all
im a begginer in weblogic server
ive installed the server (7 sp4 trial version) and the application work fine
but now i was trying to run a javascript that updating DB, it start working but after a while the weblogic server crashed and stop working without any message error
or exception (very weird).
does anybody know what can it be ?
why the server is crashes like that ?

I am curious to see that javascript. :P

Func module to convert list to pdf without using memory id

hi Experts,
Is there any funct module to convert list to pdf without using memory, as I am using Convert_to_PDF func module which outputs last page only when its running in Background.
But my req is to output all the Pages in the PDF format.
Sample code also appreciable,
Reward Points are guranteed..
Cheers
Santosh

Check the below postings :
Re: Convert spool to pdf
Convert a spooljob to a writeprotected PDF
Hope this will helpful

How to flag a func. module in Func. Library as executable in Update Task?

How to flag a func. module in Func. Library as executable in Update Task? I am getting a program termination error. The foollowing is the error analysis.
Error analysis
The function module "ZHEM" was called with the addition "... IN UPDATE TASK".
However, it is not flagged in the Function Library as executable in the update task.

Hi!
Go to SE37, tab attributes, area processing type, choose radio button update module and desired type (V1, V1 no restart, V2, V3).
Regards,
Christian

Any Func Module to pull the value from DD07T ?

Hi Experts,
In my system, we hv a Z domain and 100 values are supplied in VALUE RANGE for it.
So, I need to pull the short description(DDTEXT) of these fixed values, so, the tbl is DD07T, fine, but the issue is that, the field DOMVALUE_L(which I can supply apart from DOMNAME)..........I can pull it by a SELECT........but this filed is DOMVALUE_L not a KEY FILED so, so, SELECT takes much time.........so, let me know that Is there any Func module to pull the values from this tbl DD07T?
thanq

if you have all the Zdomains in one structure you can use the
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
      i_program_name         = gd_repid
      i_internal_tabname     = 'I_ZSCHED'
      i_structure_name       = 'Z_ALV' "><<<<<<<<<<<< structure name
      i_client_never_display = 'X'
      i_inclname             = gd_repid
    CHANGING
      ct_fieldcat            = fieldcatalog
    EXCEPTIONS
      inconsistent_interface = 1
      program_error          = 2
      OTHERS                 = 3.
you can read the field catalog and get the values..

Func. module- RS_VARIANT_DELETE to be executed without any messages

Similar Messages

Maybe you are looking for