Funcition module EXIT_SAPLMR1M_004 doesn't exists in ECC 6.0

Hi,
We are in the middle of an upgrade project from R/3 4.6C to ECC 6.0.
Actually we have a critical business process validation in
EXIT_SAPLMR1M_004 (include ZXM08U34) corresponding to enhancement
LMR1M001, but in ECC 6.0 this user exit doesn't exists and can't be
created because system send the following message:
<b>"EXIT modules are no longer supported
Message no. FL049
Diagnosis
As of release 5.0, the concept of SMOD/CMOD is not longer supported.
For this reason, no new EXIT modules and groups can be created.
Procedure
Use BADIs instead of EXIT modules."</b>
Do you know if there is other user exit or BADI instead of EXIT_SAPLMR1M_004?
Many Thanks

Hi,
check OSS Note carefully:
https://service.sap.com/sap/support/notes/459425
This note says:
In Release 4.7 user exit 'EXIT_SAPLMR1M_004' is replaced by a Business Add-In (BADI) 'MRM_WT_SPLIT_UPDATE'.
Read with attention the documentation of the badi as well.
Regarding this badi MRM_WT_SPLIT_UPDATE check OSS Note:
https://service.sap.com/sap/support/notes/1156325
Important: this note says:
An active implementation of this BAdI excludes the manual entry of the withholding tax base and amount.
Best regards.
Edited by: Pablo Casamayor on Aug 17, 2009 6:12 PM

Similar Messages

Function module EBBS_ITEMS_READ doesn't exist in ECC 5(SAPNetweaver)!

Hi,
In our 4.6B system we have a few programs that use function module EBBS_ITEMS_READ.
Unfortunately this function module no longer exists in ECC 5 and our programs no longer work!
SO I've tried to find what SAP has done to replace these function modules and I've had no luck!?
I then thought that I could copy the function module into ECC 5 as a 'Z' funcion module but EBBS_ITEMS_READ calls about 20 other function modules that are also missing.
I am really stuck on how to recraete this functionality in ECC 5. Does anyone have any good ideas or tips?
Please help!!!!!

Hi Robert,
Sorry to disappoint you, but this functionality has been removed.
As you certainly are aware of this functionality belongs to SD functionality for RRB - Resource Related Billing. In 4.5 a new solution for RRB was developed - the DIP, Dynamic Item Processor. Have a look at trans ODP1 in config or SAP Help for further info.
This functionality was removed already in 4.7 Enterprise and, in my opinion, SAP has stated this quite clearly since several years.
Now, if you still have own Z-program relying on the EBBS function group you quite obviously face a big problem. RRB now uses the DP9x, (x = 0, 1, 5), transactions and not the good old VA90 anymore. Have a look at package VPK for info about FM and other stuff for DP9x solution.
My best advise is to ask a functional consultant about this. I guess that DP9x is already used in your ECC system. If not then this must be configured and a cut-over plan has to be developed. This is quite some work - I have just done all this conversion and cut-over for a company and it has taken some 6 months calender time with all internal communication, config, etc etc needed.
Sorry, no other way, to the best of my knowledge working in this area (amongst other) since a good 10+ years both function wise and also having done a lot of programming as well.
Feel free to ask follow up questions.
Regards, Johan

How to check if the module specified in RUN_PRODUCT exists?

Hi,
I use RUN_PRODUCT to call report in form. I have a problem that
if the module specified doesn't exist, no error message will be
prompted except a log the in Report Engine as follows:
REP-0110: Unable to open file <module>.
REP-1070: Error while opening or saving a document.
I want to know if there is any method the check the existence of
the module.
Twiggie

First of all, you should know that the reports runtime searches
the rep in the current working directory, then in all the
directories in the reports_path in your registry. See in your
registry \HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\REPORTS60_PATH what
that path is, and, eventually, set it as needed.
To check if a given file exists (that is if you have its
fullname, path included), you may use the text_io package and
try to open it for read. If the open raises some exception, then
that means that the given file does not exist or that you do not
have the priviledges to open. If fopen doesn't raise any
exception, then close the file, and you may run the report.
Hope this will help.
Regards,
BD.

To implement SAP HCM module in existing SAP ECC 6.0

Hi,
I have SAP ECC 6.0 system already implemented 2 years back.
I am planning to implement SAP HCM with OM, PA, SAP Time management, SAP PAYROLL in existing SAP ECC 6.0 system.
I have currently 3 system landscape for SAP ECC.
I would like to know what change/addition is required in above landscape to implement SAP HCM module in existing SAP ECC 6.0
Do share your view.
Regards.

Hi.
As per you, Already designed Landscape. Why dont you follow you existing Landscape which is alredy proved for other modules.
Normally Dev/Quality/Production clients will there..
If more that depends upon flexibility in Each client and defining different business for testing and production interfaces purpose.
Better use Existing only remaining modules already sucessfully running in Production Right????

Function module does not exist in ECC 6.0

Hi All,
These two below function module does not exist in ECC 6.0 but exist in 4.6.Could you please let me know replacement of these two's.
FI_DOCUMENT_ARCH_READ_SINGLE
CHECK_IBAN_ACTIVE
Thanks
Mohit

Hi,
Thanks for your reply.Could you please give me example that how to use it.
Thanks
Mohit

Nvidia doesn't exist in /proc/modules

After running pacman -Syu (I should have blocked the nvidia & nvidia-utils packages from upgrading...), X won't start with nvidia and resolution only goes to 800x600 in vesa.
So I tried going to a completely minimal xorg.conf file with the bare minimums in order to rebuild my settings. I am getting this error:
ERROR: Module nvidia does not exist in /proc/modules
In order to use the new nvidia module, exit Xserver and unload it manually.
Xserver isn't running, as I am sitting on the command line, so not sure where to go from here.
Here is my output of pacman -Qs nvidia:
local/nvidia-96xx 96.43.13-2
NVIDIA drivers for kernel26, 96xx branch.
local/nvidia-96xx-utils 96.43.13-1
NVIDIA drivers utilities and libraries, 96xx branch.
I am using a GeForce 420Go on my old laptop, so it uses the old 96xx driver. This was working perfectly before the package upgrade.
Thoughts?

derekr44 wrote:
Will as soon as I can get back to the command line. X is stuck on a black screen and ctrl-alt-bkspc doesn't shut it down...
CD drive doesn't work, so booting from a CD is out. This old laptop doesn't boot via USB, so that's out too.
Anyone have any ideas how I can get to the command line in order to try toxygen's suggestion?
Ctrl+Alt+F1 to get to a console. If that doesn't work, which seems likely, then do a hard reboot and add 3 to the end of your kernel command line in GRUB. (If you start a login manager via DAEMONS in rc.conf, you'll need to add 1 or S to the command line instead).

Adding T-code to Role Area Menu which doesn't exist in box

Hello,
We are using a SAP system called QIM which has "jumplink" functionality, which is a web based linked (NWBC) which will launch you into a ERP system transaction when clicked. For example, in QIM we will display a outbound delivery, and if we click on the link it launches VL03N from the ERP system and displays as web UI.
In PFCG under area menu, this transaction code appears under the menu, but VL03N doesn't actually existing in the system... The issue is we created a custom object for inbound delivery and we need ot add it under this area, but when we attempt to add a transaction code under the Role Area, the system says the t-code doesn't exist... Even when we try this with an existing t-code showing in the menu (Vl03N) it says it doesnt exist. Same if we look at the authorization object S_TCODE. These t-codes exist in here, but when you try to readd them they system says it doesn't exist.
Please find the attachments with some screen shots... Any idea how we can do this?

You can create a role menu as remote enabled remote menu.
The authority checks will happen on the remote side, also against objects which don't exist in the calling system as the music is on the other side.
On the RFC client system side, you only need the parameter transaction to start the remote transaction in the remote system.
See the documentation on SYST function module ABAP4_CALL_TRANSACTION.
This is however a rather antiquated technology... it is more popular to use a SAP Portal or webdynpro applications for this sort of thing (the user does not notice the difference) or later versions of such integration such as Fiori UIs or imbedded links within the Business Client.
I don't want to lean out the window too far, but the buggy phase of these new things is approaching an end and they are usable if you are on newer releases. Then you can pool the menu and use APIs for navigation and no more irritating S_TCODE checks.
Cheers,
Julius

Sale order doesn;t exist issue in APO

Hi ,
I am facing issue while trying ot create outbound delivery from sale order. But during delivery creation , BAPI_OUTB_DELIVERY_CREATE_SLS , bapi throws error as " SALE order xxxxxxxxx doesn't exist in APO , Only 0 EA of material is available..." . But when manually do, delivey is created . Hence we analysed it is due to the time taken by APO system to update the Sale order.
Let me know how to get the sale order or orderid in terms of APO to verify the SO is updated in APO system .
Kindly suggest

Dear Experts,
this message assumed answered, I'm facing with a similar problem, during the replication of business partners the address isn't created in SAP ECC, and a bdow with the error appears.
Thanks in advance
Cris

Link an Adobe form (existing on ECC) to a button to display this form

Hi all !
I work on a Portal and I need to link a form to a button on this portal.
In fact, on this Portal, I have a page that displays all returns (which were created on ECC with VA01 tcode).
Each line corresponds to one return. And for each line, there is a button.
I want that this button allows to display the related return form in PDF format.
But this PDF form already exists on ECC: in VA03, I retrieve my return number, I click on "Header output preview" button, I choose my message type (Z...) and click on "Print preview" button. Then my return form is displayed in PDF format.
I want that my button on the Portal allows to display my return form in PDF format in the same way as in VA03 (without the message type choice because this message type will be defined as default).
Could someone help me about the way to link my existing return form to my button in Portal ?
Thanks in adance.
Have a nice day.
C.

hi dear
yes the enabled property is checked but still form doesn't allow to enter value and submit button is also disabled.
Is there any setting or some program code is required.
It would be great if some body can help us in this ....
many thanks in advance.
thanks

Material doesn't exist in warehouse

Hello All,
I am encountering the subjected error "Material doesn't exist in warehouse"
Scenario:
STO with SD module,STO creation,Delivery creation,PGI and Post GR
While receipting the stock with MVT 101 some stock posted to Loss/gain account with MVT 943,This happened in year 2003.
Subsequently this stock ended in Stock in transit(Decimals).
The material type is BULK,And No WM view at all.
2005 WM was implemented.
Problem/Issue:
Now after 8 years the Stock in transit stock needs to be reversed or physical/book stock cleared from the inventory,I tried
my own permutaions and combinations.
Irrespective of anything ,The result is error "Material doesn't exist in warehouse".
Analysis:
Is this error due to WM implemented after the stock in transit stock created.
My help requested for:If anybody has encountered a similar situation,Could u plse help me out.

Hi,
ur guess might be correct, it is because of WM implimentaition.
Warehouse no. will be assigned to plant and storage location combination.
So the stock which u r reversing to the Storage location which might be assigned to a warehouse number. But the material is not warehouse managed. So it throws an error and does not allow for reversal.
One solution may be u need to mainatin the material for warehouse, first check the plant and SL wr ur reversing the stock assigned to which warehouse no. and the same warehosue no. u maintain in material master for that material and try reversing the stock in transit.
Thanks,
Ravi

FM: RSDRO_READ_ODS_OLAP doesn't exists

Hi Experts,
We are Rampup Customer with SP7.
We are using a Function module RSDRO_READ_ODS_OLAP in one of the customized program. This FM doesn't exists in 2004s BI.
I found FM name in the Object Navigator (SE80)in Package RSDD under RSDRO_REPORT, When I double click on FM RSDRO_READ_ODS_OLAP it says FM doesn't exist.
Can anyone Suggest me, what is the status of this FM.
Is that Under development ? Obsolete or any alternate solution for this.
Thanks.
Swamy.

Hi Swamy,
this function has vanished in 7.0. This is simply the risk that you take if you use internal calls.
I suggest that you look at the RSDRI_INFOPROV_READ. It is documented albeit also an SAP-internal API. However, it is more likely to remain stable.
If you are looking for a stable BAPI then consider the OLAP BAPI.
Hope this helps.
Thomas

[Solved] Root device doesn't exist

Hi!
EDIT SOLVED: Booted from a arch-core CD and did a;
mv /etc/mkinitcpio.conf.pacnew /etc/mkinitcpio.conf
pacman -U /var/cache/pacman/pkg/kernel26-2.6.25-4-1-i686.pkg.tar.gz
Seems like a had a configuration error in my old mkinitcpio.conf file and kernel install failed.
.. But should it install when the kernel install failes?
For interested, here is my pacman.log
[2008-05-24 20:04] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2008-05-24 20:04] ==> Building image "default"
[2008-05-24 20:04] ==> Running command: /sbin/mkinitcpio -k 2.6.25-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2008-05-24 20:04] :: Begin build
[2008-05-24 20:04] :: Parsing hook [base]
[2008-05-24 20:04] :: Parsing hook [udev]
[2008-05-24 20:04] :: Parsing hook [autodetect]
[2008-05-24 20:04] :: Parsing hook [pata]
[2008-05-24 20:04] :: Parsing hook [scsi]
[2008-05-24 20:04] :: Parsing hook [sata]
[2008-05-24 20:04] :: Parsing hook [usbinput]
[2008-05-24 20:04] ==> FAIL
[2008-05-24 20:04] ==> Building image "fallback"
[2008-05-24 20:04] ==> Running command: /sbin/mkinitcpio -k 2.6.25-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
[2008-05-24 20:04] :: Begin build
[2008-05-24 20:04] :: Parsing hook [base]
[2008-05-24 20:04] :: Parsing hook [udev]
[2008-05-24 20:04] :: Parsing hook [pata]
[2008-05-24 20:04] :: Parsing hook [scsi]
[2008-05-24 20:04] :: Parsing hook [sata]
[2008-05-24 20:04] :: Parsing hook [usbinput]
[2008-05-24 20:04] ==> FAIL
[2008-05-24 20:04] upgraded kernel26 (2.6.25.4-1 -> 2.6.25.4-1)
And old mkinitpcio.conf
MODULES="ata_generic ahci"
BINARIES=""
FILES=""
HOOKS="base udev autodetect pata scsi sata usbinput keymap filesystems"
I think it was the keymap it complained about
---- Original message
After the last upgrade with kernel 2.6.25, i get;
Attempting to create root device '/dev/sda3'
ERROR: Failed to parse block device name for '/dev/sda3' unknown
ERROR: root fs cannot be detected
Waiting for device to settle...done
Root device '/dev/sda3' doesn't exist, attempting to create it
ERROR: Failed to parse block device name for '/dev/sda3' unknown
ERROR: Unable to create/detect root device, '/dev/sda3'
Dropping to recovery shell.. type 'exit' to reboot
at startup.
The fallback entry at grub, gives the same message.
When trying to modprobe a module, it gives me message:
FATAL: Could not load /lib/modules/2.6.25-ARCH/modules.dep: No such file or directory
Only /lib/modules/2.6.24-ARCH exists.
Last edited by cybe-arch (2008-05-24 18:40:56)

I have the same issue with kernel26-lts-2.6.32.41-1.
Recent Arch updates made my favourite operating system of the worst kind: flashplugin freezez in 5 seconds, mozilla gets some freezes as well,
copying files from one drive to another takes like 1.5h and many more weird things including some frequent performance abuses by the processes.
I see Arch behaves like old Microshit products. Sad thing but I move to more stable distro very soon, because I have enough of fixing bugs 3 times a week, to make my Arch usable again. Before like 6 months ago updated were less frequent and surprises were once a month not twice a week. Outrageous.
Perhaps Arch crew is overrun by the Apple guys, to compromise this distro, to encourage people to buy Apple products instead of using faulty Windowses or from day to day more troublesome Linuxes.
Going to the point.
So in response I wanted give LTS a try, but it drops me to recovery console (ramfs) saying that "Root device doesn't exist"

Error message "Address doesn't exist "

Dear Experts,
In ME23n, when i give some purchase order and click on ADDRESS tab it is giving the error message as "'Address doesn't exist 51457447 4601225079"", And when i check the address in ADRC table for the same vendor via ADRNR number it is providing the address
And also it displays the address in the smartform preview.
But same is not populated in the ADDRESS tab.
Anybody help
Regards,
Venki....

Venki,
I once had exactly the same problem and message. It turned out that the error message was misleading..
In my case, a (custom) function module was returning an exception WITHOUT specifying a message. Subsequently the calling program also returned an exception, and simply reported the last message sitting in the SYST structure.
I recommend you set a breakpoint on the MESSAGE statement when debugging.
cheers
Paul Bakker

ENTRY_NEU doesn't exist in program /SMB40/FM06P

We are getting the above error when trying to print the PO. The log says ENTRY_NEU doesn't exist in program /SMB40/FM06P. There is short dump for CALL_FUNCTION_PARM_MISSING.
We are doing an upgrade and this has occured as part of the upgrade. PRD on the old system is fine, but the new system gives this error and All the config, is correct and the same.

if this is full sap standard program, ask sap support. Note that the 2 messages are not directly related (one is for a missing subroutine, the other is for a mandatory parameter in a function module that is not passed in the CALL FUNCTION). Maybe you use best practices of the wrong release or something like that...

Mod_plsql: PROCEDURE DOESN'T EXIST

Hi guys,
This error is reported in the error log. I am running oracle db 9.2.0.6 and APEX 2.2 (installed oracle HTTP Server from 10g Companion CD). The installation went fine with no errors. I am trying the URL: http://onezero/pls/apex/apex_admin
Error.log reports:
[Sun Oct 29 13:32:42 2006] [notice] FastCGI: process manager initialized
[Sun Oct 29 13:32:52 2006] [error] [client 10.10.10.10] [ecid: 1162125171:10.10.10.10:5360:4240:3,0] mod_plsql: /pls/apex/imagesjavascript/htmldb_html_elements.js HTTP-404 \nimagesjavascript: PROCEDURE DOESN'T EXIST\n
[Sun Oct 29 13:32:52 2006] [error] [client 10.10.10.10] [ecid: 1162125172:10.10.10.10:5360:4240:4,0] mod_plsql: /pls/apex/imagesjavascript/htmldb_get.js HTTP-404 \nimagesjavascript: PROCEDURE DOESN'T EXIST\n
[Sun Oct 29 13:32:52 2006] [error] [client 10.10.10.10] [ecid: 1162125172:10.10.10.10:5360:4240:5,0] mod_plsql: /pls/apex/imagescss/core_V22.css HTTP-404 \nimagescss: PROCEDURE DOESN'T EXIST\n
[Sun Oct 29 13:32:52 2006] [error] [client 10.10.10.10] [ecid: 1162125172:10.10.10.10:5360:4240:6,0] mod_plsql: /pls/apex/imagescss/htmldb_V2.css HTTP-404 \nimagescss: PROCEDURE DOESN'T EXIST\n
[Sun Oct 29 13:32:52 2006] [error] [client 10.10.10.10] [ecid: 1162125172:10.10.10.10:5360:4244:1,0] mod_plsql: /pls/apex/imageshtmldb/builder/1px_trans.gif HTTP-404 \nimageshtmldb: PROCEDURE DOESN'T EXIST\n
[Sun Oct 29 13:32:52 2006] [error] [client 10.10.10.10] [ecid: 1162125172:10.10.10.10:5360:4240:7,0] mod_plsql: /pls/apex/imageshtmldb/apex_logo.gif HTTP-404 \nimageshtmldb: PROCEDURE DOESN'T EXIST\n
Here is my marvel.conf file:
Alias /i/ "C:\oracle\product\10.2.0\db\Apache\Apache\images/"
AddType text/xml xbl
AddType text/x-component htc
<Location /pls/apex>
Order deny,allow
PlsqlDocumentPath docs
AllowOverride None
PlsqlDocumentProcedure wwv_flow_file_manager.process_download
PlsqlDatabaseConnectString onezero:1521:HTMLDB ServiceNameFormat
PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
PlsqlAuthenticationMode Basic
SetHandler pls_handler
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDatabaseUsername APEX_PUBLIC_USER
PlsqlDefaultPage apex
PlsqlDatabasePassword oracle
Allow from all
</Location>
Httpd.conf contains the following "include" statements:
# Include the mod_oc4j configuration file
include "C:\oracle\product\10.2.0\db\Apache\Apache\conf\mod_oc4j.conf"
# Include the mod_dms configuration file
include "C:\oracle\product\10.2.0\db\Apache\Apache\conf\dms.conf"
# Loading rewrite_module here so it loads before mod_oc4j
LoadModule rewrite_module modules/ApacheModuleRewrite.dll
# Include the SSL definitions and Virtual Host container
include "C:\oracle\product\10.2.0\db\Apache\Apache\conf\ssl.conf"
# Include the mod_osso configuration file
#include "C:\oracle\product\10.2.0\db\Apache\Apache\conf\mod_osso.conf"
# Include the Oracle configuration file for custom settings
include "C:\oracle\product\10.2.0\db\Apache\Apache\conf\oracle_apache.conf"
# Include reference to the marvel configuration
include "C:\oracle\product\10.2.0\db\Apache\modplsql\conf\marvel.conf"
I got it working fine on database 10g and APEX 2.2 (10g comp. CD). Any ideas what the problem is on 9.2.0.6 db and APEX 2.2> Many thanks.
Regards
Zee

You might have better luck with this question on the htmldb forum.

Funcition module EXIT_SAPLMR1M_004 doesn't exists in ECC 6.0

Similar Messages

Maybe you are looking for