Function Buttons dont work on my Satellite P300-1FN

Hi,
I am having problems with the Function Buttons on my Satellite P300-1FN Laptop.
I recently installed Vista SP2 and flashed the BIOS and now the buttons have stopped working and LEDs lighting them wont turn off when the Mute or LED On/Off button is pressed. I have installed the newest Value Added Package but that has not helped. I have had this problem before without SP2 or the new BIOS installed and found that going in the BIOS and resetting it to default would work but it hasn't this time.

If I am remembering well in Toshiba HWSetup tool must be one tab for this button.
Check please what options is defined there.
Try to change it.
Please post the results.

Similar Messages

Qosmio x300 and Win7 - FN buttons dont work

I reinstalled Windows 7 and now the FN buttons dont work. I have installed the newest version of VAP, the flash card utility is running. So I have no idea.
Did I forget to install something?
Or is there a tool who installs all drivers for my Qosmio x300 in one piece?

Hi
Normally its enough if you install Value Added Package and Flash Cards Support Utility to use the FN keys. But make sure that both tools are released for Windows 7 and not for old Vista.
As far as I know if you search for Qosmio X300 on the Toshiba page you will only find VAP for Windows 7. The Flash Cards Support Utility is an older version. I would recommend install a newer version, for example search for Satellite L550. There you can find Flash Cards Support Utility for Windows 7, its version 1.63.0.4

Sound and brightness buttons dont work anymore

my sound and brightness buttons dont work any more unless I hold down the function button. This happened after I downloaded the new update I think. Is there any key combination that I could have hit that made this happen?

Go to System Preferences->KeyBoard & Mouse->KeyBoard and make sure "Use the F1-F12 keys to control software featues" is off. It probably got turned on somehow by the update.

Some of the function keys dont work

i just bought a new hp probook g2 notebook pc and it seems that some function keys dont work like the voice up and down are working but brightness keys arent .

Vic, welcome to the forum.
The error message BIOHD-2 normally indicates that the hard drive has failed. Here is a guide to help you run the SMART test for the drive from the BIOS. If you get a similar error message, you should replace the hard drive. Also, here is a guide to help you with Recovery of the system after the drive has been replaced.
Please click the " Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

HT1386 home button dont work and it say ipod is disable and connect to itunes?

I have a ipod and the home and power button dont work so there is button on the screen that is the home button. Now all it says is IPod is disabled connect to itunes? any help

Place the iPod in recovery mode using one of these programs and then restore via iTunes:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too

Hp dv7-1245dx media smart button dont work

hi, i have a hp pavilion dv7-1245dx, i format de drive c and install the windows vista 64 in spanish because im in argentina, but before search and install all drivers,my media smart quik lunch button dont't work, I intall all drivers from the hp web, then the media smart button work bad because y install the dvd play and when I push the buttom sound like i push 2 twise and open the dvd play no the mediasmart menu, then i unistall the dvd play, the media samart work good from the computer icon but to the button dont work, sound like two twise again but dont open nothing, y don't know what to do? I unistall and install again all quik lunch buttons and finger print drivers.help me plase, and another thin. when i format i lost the webcam software i would like someone help me to recober it .
thanks
PD: sorry for the write erros I from argentina I dont speek english very well.
Message Edited by nachodv7-1245dx on 07-25-2009 10:44 AM

I have the exact same problem. I noticed this started after some windows update just prior to upgrading to Windows 7. And then it got worse after the upgrade.
I'm having to go into the task manager and end the smartmenu.exe application just to stop the nagging volume bar across the middle of the screen and just to use the computer, but the Volume still jumps around rapidly.
Please, HP read this and help.
Robert S. Rodriguez Jr.
Robert S. Rodriguez Jr.

My iphone 3gs is in ios5 bypass mode and my power button dont work

my power button dont work how can i fix this the bypass problem ?

You have a hardware problem. Make an appointment at the genius bar. You can get an out of warranty replacement for $149.

Volume button dont work correctly

Hello,
I have iPhone 4S on 5.1.1 which I bought in September last year.
Yesterday when I listen to music with my iPhone I found out the the MINUS volume button dont work correctly.
It's need to push him hard to decrease the volume. however the PLUS volume button work correctly.
In addition there is no "click" sound when I press the minus volume button.
what should I do?
I live in ISRAEL and there isn't Apple Store here so the only solution for me is to contact the carrier which I bought the iPhone from them but they probably will require payment for the repair.

sorry but i actually need to use the volume buttons Jujusoccer11
i've tried resetting already and restoring from back up already but still has the same problem lllaass,
i'll try restoring to factory defaults now, i hope it works

Satellite P300-1FN TV - HDMI stopped working...

Dear Anybody who knows more than me about this, so around 6billion people...
I recetly purchased both a Toshiba 32'' plasma TV (regza i think) and Toshiba Satellite P300-1FN.
I also purchased a HDMI cable and have been watching filthy movies from my laptop on my phat 32'' TV for a couple of months now. Lovely stuff.
After around 1 month, the HDMI port 1 stopped working. It just wouldn't pick up any signal from the computer, so i remove the cable and placed it in the HDMI port 2 on the back of the TV. Worked fine. (so i guess it's not the cable at fault) Again for about a month, now that's stopped working too...DA-DA-DA-DUUUUUUUUUUUUUUUUUUM...
Before, when i plugged it into the computer, both screens would turn black for around 3 seconds while they adjust the resolution, then the same image would appear on both. Now when i plug it in, the computer screen just 'blinks' followed shortly by the message on the relative HDMI TV channel 'no video signal', if i remember correctly.
WTF??
Cheers, Allan.

Hi
Please don't be mad on me but you must understand it is user-to-user forum and if someone can help will probably write something and try to help. There is no reason for comments like the last one.
Anyway, I have good experience with HDMI and connection to the TV. I have Satellite P200D and Satellite A300, both with HDMI port. I have used both of them with my BRAVIA LCD TV and it works properly. Brothers Satellite P300-1GL doesnt made problems either.
So it is not easy to say what is wrong there but I can say that this behaviour is definitely not normal.
In my opinion you should contact nearest Toshiba service and let them check your notebook.
What else you can do? Not much, just test it eventually with some other LCD TV to see if the same happen.
Sorry for this late posting.
Lets see if someone else has some comment to this.

SBH20 play/pause, next, previous buttons dont work (Xperia Z3)

Hi. I have purchased SBH20 but play, pause, next, previous buttons dont work. Volume buttons and play/pause button to accept/refuse calls work. I use it with connection with Xperia Z3. Can u help me what sould I do? Dont wanna withdraw. Thanks.
:loop; start "" %0; goto loop
Solved!
Go to Solution.

Yes, I did try with Xperia Z3 and it works fine for me. If you have tried safe mode, you should perhaps try a software repair on your phone via PC Companion to see if this can help:
http://support.sonymobile.com/global-en/tools/pc-companion/
In PC Companion you press start on Support Zone > Start on Update the phone/tablet software > Repair phone/tablet (the blue clickable link in the message) > Follow these steps without having your device connected to the PC.
Follow the instruction that appears in the program and do not connect your device until this guide tells you how to connect it.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Volume and the volume buttons dont work unless headphones plugged in. Why?

my iPad's volume buttons dont work unless i have my headphones plugged in. Also my volume in general doesnt work because it says its still connected to a dock, but i dont own a dock. why doesnt the volume work or the speaker.

finally i found solution ... it was finger print device and i dont know what is the relation between finger print and sound problem any way the solution is installing the latest fingerprint definition and i found sound working properly !!

Power & volume buttons dont work

I purchased a used Ipod touch 4th gen for my stepson. I was told the top button doesnt work & I was thinking that was ok so I still took it. Went to set everything up for my stepson last night & the volume buttons dont work either. Can someone please possibly help me!?!? Yes, thats what I get for buying used but was trying to do something good for my kid.

- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
Apple - iPod Repair price

The buttons dont work on my ipod!!

i have a fourth generation ipod and in the last 2 months the buttons and center button dont work.However i can only change the song by shaking the ipod and when i tilt it the cover flow appears as normal but still i cant work the ipod buttons. i have tried updating and restoring the ipod but this has not worked. any suggestions to what i should try?

Have you tried a hard reset?

N91 - buttons dont work!!!

i bought my n91 a few months back.
has been working fine until a few days back.
i dont know what i did but now half the buttons dont work!!
i can do barely anything ( i cant check messages, contacts etc)
PLEASE HELP!!!

27-Oct-200703:19 PM
trixielicious wrote:
i have the same problem...
NONE of my buttons work. i can't do anything!!! only the on/off and lock/unlock buttons work.
i've tried reprogramming it, turning it on and off... nothing works.
it really sucks, i've been going to so many nokia care centers and they've been making me go around in circles.
i'm gonna try again tomorrow. it's really hard because my messages come in but i can't do anything. i can't read any of them! i can't even read my contacts. i can't even back up the info stored inside because it requires me to press buttons!!!
For your case the nokia care centres are the main help source for you. It's very sad they are circling you around.

POWL buttons dont work

SRM 7.01 and ECC6.0 EhP5
Hi experts,
on srm- POWL application many buttons dont work. Im able to see Purchase orders etc., but when i select a PO, the buttons(e.g.: "edit", "change", "disyplay" ) are clickable, but no action follows. A javascript.void() error is shown in the browser.
I analysed the buttons and found out that they try to call the powl (of course). But the http-request receives an http 403 forbidden response. (wether i call on http or https).
(URL CALL: mycompany.com:8XXX/sap/bc/webdynpro/sap/powl;sap-ext-sid=E871l_9YTvSOSH9ffhw7bQtEaqrJsDeZHNvkWQbzsLyA?sap-contextid=SID%3aANON%3asrmsystem_00%3alYDfk8xxwglgfx4Zt9wTURpcrEaXLZYQ9SN1JVNb-NEW).
The SRM-trace doesnt show any usefull hints. (just the failed http call)
Is there any special Authorization for the POWL application?
Do you have an idea, how to solve this problem?
Thanks
Infos:
Alle connections between enterprise-portal and srm are set up to https and work (checked). Systemaliases checked.
User has SAP_ALL on involved systems, portal roles, and pfcg roles.
RFC connections to erp are checked and work.
I've tried different browser and popups are allowed

Hi,
You have to check the POWL authorisation for the user
Checking Authorization
Check the required authorizations using the authorization object CA_POWL in the backend system.
In transaction SU03 (Maintain Authorizations and Profiles) double-click the object class AAAB (Cross-Application Authorization Objects) and then select the authorization object CA_POWL (Authorizations for Personal Object Worklist).
The following authorization fields enable you to define complex authorizations in an AND relationship to check whether a user is allowed to perform a certain action:
●     POWL_APPID     Application ID
●     POWL_CAT          Activity
●     POWL_LSEL          Authority state: allowed or disallowed
●     POWL_QUERY     Activity
●     POWL_RA_AL     Authority state: allowed or disallowed
●     POWL_TABLE     Authority state: allowed or disallowed
For more information, see the system documentation for the authorization object CA_POWL.
Regards
G.Ganesh Kumar

Function Buttons dont work on my Satellite P300-1FN

Similar Messages

Maybe you are looking for