Function codes in BADI

HI,
I am learning BADI's. while going thru a document i got strucked with this can anyone explain me and how to do this.
1)"*Function codes can be entered for a BADI *for the corresponding menu entries in the user interface definition"
2) "Subscreen areas can be entered for a BADI. Screen enhancements can be implemented for these in the form of subscreen screens".

hi,
Function codes in Menu exits i.e Menu exits are the exits for adding new menu's to the standard transaction.
when you check with any badi that provide menu exits it has function code like 'CU1', 'CU2', and so on.
for that particular fctcode you can add your own functionality,so that it appear for that transaction.
reward points if useful,
siri

Similar Messages

Assign function code to a field in internal table

Hi all,
Can we assign a function code to one field in internal table so that we can use it as an user command in list display.
For ex:
data : begin of itab occurs 0,
 check(1) type C,
 num type I,
 end of itab.
I am preparing a list display using WRITE statements.
I'ld like to update the checked value of check box as soon as the user selects a check box. So I would like to assign a function code to this check box. Then I can use AT user-command.

Hi,
dinesh's apporach is not bad, but
1. the structure' name cannot be part of the component
2. you need to make sure the component-name always is in upper case.
Try adapting the following code:
data: begin of wa_test,
 field01 type string,
 field02 type string,
 field03 type string,
 end of wa_test.
data: l_fieldname type string,
 l_counter type string.
field-symbols: <testc> type string.
do 3 times.
l_counter = sy-index.
concatenate 'field0' l_counter into l_fieldname.
translate l_fieldname to upper case.
assign component l_fieldname of structure wa_test to <testc>.
if <testc> is assigned.
 <testc> = 'any value'.
endif.
enddo.
write / wa_test-field01.
best regards

What is the function code of create new session?

what is the function code of create new session?
thanks...

Hi
Please put a "/n" (to open a new session after killing the current session)
or "/o" (to open a new session without killing the current session)
or "/i" (to end the current session) before the below T Codes as per your requirement...
For more Tcodes check the following
=>smartforms - Smartforms (SAP Form Builder to Create and Adjust Forms)
=>cmod - Enhancements, User Exits (Project Tool to coordinate changes into projects for the purpose of activating all user exits for a particular project)
=>sale - ALE Customizing
=>bale - Distribution Administration (ALE)
=>wedi - IDOC Type and EDI Basis
=>shdb - BDC (Transaction Recorder)
=>lsmw - LSMW
=>bapi - BAPI
=>spau - Display Modified DE Objects
=>spdd - Display Modified DDIC Objects
=>sara - central idoc archiving
=>stms - Transport Management System
=>wedi - IDOC Type and EDI Basis (IDOC Configuration)
=>bd21 - Analyze change pointers - create IDOC from change pointer
=>bd10 - Send Material Master
=>bd12 - Send Customer Master
=>bd14 - Send Vendor Master
=>bd50 - Activate Change Pointer for Message Type
=>bd55 - Conversion rule user exit (Link conversion rule user exit to the different system \ partner combinations)
=>bd54 - Maintain Logical Systems
=>bd71 - Distribute Customer Model
=>bd87 - Process Inbound IDOCs
=>bd88 - Process Outbound IDOCs
=>bdm2 - Cross-system IDOC Reporting
=>bdm7 - ALE Audit - statistical analyses
=>bdm8 - ALE Audit - sending confirmations
=>bd61 - Activate Change Pointer generally
=>bmv0 - Direct Input Data Transfer Administration
=>rz04 - Operation Mode
=>rz12 - RFC Server Group Maintenance
=>sar3 - Archiving object customizing
=>s001 - SAPoffice Inbox
=>s010 - Standards Texts (SAP Script)
=>se01 - Transport Organizer (Extended View - Performing and managing the transport of development object across different systems)
=>se09 - Transport (Workbench) Organizer (Controlling and keeping track of Development work and Development Objects)
=>se24 - Class Builder (BAPI)
=>se30 - Runtime Analysis
=>se36 - LDB
=>se37 - Function Builder
=>se38 - ABAP Editor (to modify ABAP programs)
=>se39 - Split-Screen-Editor
=>se11 - ABAP Dictionary
=>se16 - Data Browser (Table contents display)
=>se41 - Menu Painter
=>se51 - Screen Painter
=>se71 - SAPScript Forms
=>se73 - SAPScript Font Maintenance
=>se75 - Graphic Objects and Graphic IDs Sapscript Settings
=>se78 - Administration of Form Graphics (Import Graphics into SAP System)
=>se80 - Object Navigator
=>se84 - ABAP Repository Information (search for SAP objects)
=>se91 - Message Maintenance
=>se93 - Maintain T codes
=>su01 - User Maintenance (Security)
=>su02 - Maintain Authorization Profiles
=>su03 - Maintain Authorizations
=>slg1 - Evaluate Application Log
=>sm12 - Lock Entries
=>sm21 - System Logs
=>sm36 - Background Job Scheduling
=>sm37 - Background Job Monitoring (display batch jobs)
=>sm31 - Table Maintenance
=>sm30 - Calling View Maintenance
=>sm35 - Batch Input Monitoring (Error Logs)
=>sm50 - Process Overview
=>sm58 - Transactional RFC Monitoring
=>sm59 - Maintain RFC Destinations (Define RFC Configuration)
=>snro - Number Range Objects (for IDOCs)
=>scc4 - Client Overview (Create, Quick Delete, Modify)
=>spro - Customizing, Execute Project
=>sp01 - Spool Administration
=>sq01 - Maintain SAP Queries
=>st02 - Buffer Analysis (Status Overview)
=>st03 - Workflow Analysis
=>st05 - Performance SQL trace (Tracking the Database calls from the System Transaction and Programs)
=>st22 - ABAP Dump Analysis, check logical runtime errors
=>/h - ABAP Debugger
=>we02 - Display IDOC
=>we05 - IDOC lists
=>we07 - IDOC statistics
=>we12 - Inbound processing of outbound file - convert outbound to inbound file
=>we14 - Process (dispatch) IDOCs through Port - RSEOUT00
=>we15 - Outbound IDOC from NAST - message control
=>we16 - Inbound File
=>we18 - Generate status file
=>we19 - Test tool
=>we20 - Add new Message Type to Partner Profile
=>we21 - Maintain Port Definition
=>we30 - IDOC Type development
=>we31 - IDOC Segment development
=>we41 - Process Code Outbound
=>we42 - Process Code Inbound
=>we46 - IDoc Administration
=>we47 - Status Code Maintenance
=>we57 - Assign function module to logical message and IDoc type
=>we63 - IDOC Type for Parser Output
=>we82 - Assign IDOC to Message Type
=>we60 - IDOC Documentation - IDOC Types
=>we61 - IDOC Documentation - IDOC Record Types
=>we81 - Create new IDOC Message Types
=>we82 - Assign IDOC to Message Type
=>pa20 - Display HR Master Data
=>pa30 - Maintain HR Master Data
=>bd59 - Create and assign Filter Object Type for Message Type
=>bd64 - Maintenance of ALE or any other Distribution Model
=>db02 - Storage Management and Database Performance
=>db14 - Database monitor
=>se18 - BADI definitions
=>se19 - BADI implementations
=>fd03 - Accounts Receivable Master Data (Display Customer in Accounting)
=>me22 - Change Purchase Order
=>me21 - Create Purchase Order
=>me51 - Create Purchase Requisition
Official source of SAP T Codes -Go to se11 or se16 and view table entries for
TSTC and TSTCT. This will give you the Transaction List.
Reward all helpfull answers
Regards
Pavan

Function Code can not be selected

Dear expert,
Please help me, there is a uploader For MIGO, USer is uploading data using this uploader, Sometimes when user try to upload data, he gets a message on status BAR:
Function cannot be selected, When i Double Click on that Message i Get Following Information:
Message NO: 00255
Diagnosis
You entered an Inactive function code
You can trigger this by:
inputting directly in the OK code field
inputting the fastpath of an inactive menu function
choosing an inactice function key, or even by
choosing enter, if enter has an inactive function
In batch input a function code is included in field BDC_OKCODE of the session, as long as this function Code is not assigned to Enter
As well as activating function codes stastically in the menu painter(Transaction SE41), they can also be deactivated dynamically using the excluding addition with PF-STATUS.
Now one more thing i want to tell you is when user just open MIGO directly and try to enter some data and get back before saving and then Execute uploader then user can upload data without any error,
Kindly tell me what shoul i do to remove this error permanently
Thanks in advance
Regards
Shelly Malik

There is an error in this uploader, it should not call this command which is not available on that screen. What is this uploader? If it's a custom abap program, you must debug it.

How to track the standard function code eg. PRI

Dear All,
I have a requirement that says that I will execute a report. Now when the user will click on the print button may be customized or can be taken from menu (Standard PRI) I want to update a table when the printout has been taken. I am not able to track down the print functionality through AT USER-COMMAND. Can anyone please help me out.
Thanks and regards,
Atanu

open the standard program in se80
check the standard menu items in GUI status.
check the function code there..
regards.
santhosh reddy

How to find function code for buttons on toolbar in oops alv

Hi experts,
I want to remove some buttons from toolbar in oops alv, i know the procedure like get function code and pass the value in a table and pass that table to IT_TOOLBAR_EXCLUDING of
method set_table_for_first_display but I WANT TO KNOW HOW TO FIND FUNCTION CODE FOR BUTTONS ON TOOLBAR IN OOPS ALV

Hi Prakash,
-->First you have to set the pf status in your alv program by,
{FORM pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'FIRST'.
ENDFORM.                    "PF_STATUS}
-->Pass this Subroutine name in the Function module, Reuse_alv_grid_display's parameters i.e,
      i_callback_pf_status_set          = 'PF_STATUS'}
*-->Then doble click on that pf status,
From the menu bar, select Extras->Adjust Template->List Viewer,
This will give you the existing statndard gui status of the program*
->Then catch that function codes in the User command Parameter of the Function module Reuse.. i.e,
      i_callback_user_command           = 'COMM'
And make a subroutine of the name 'COMM'i.e,
FORM comm USING ucomm LIKE sy-ucomm selfield TYPE slis_selfield.
DATA: okcode TYPE sy-ucomm.
okcode = ucomm.
CASE okcode.
    WHEN 'REF'.
    CALL FUNCTION 'POPUP_TO_INFORM'
      EXPORTING
        titel         = 'MANSI'
        txt1          = 'CREATED BY'
        txt2          = SY-UNAME
      TXT3          = ' '
      TXT4          = ' '
endcase.
Hope it helps you
Regrds
Mansi

How to translate function codes from GUI-status into other language ?

Hello experts,
I've a programm called mrs - multi resource scheduling.
This programm has texts in english and german.
Now I want to translate the text also in italian.
When I opne the programm in se80, in path GUI-status
there are the ui-elements (Function codes).
When I open them in english, I get the texts in english, when
I open them in german , I get the texts in german.
Openeing in italian shows me the english texts.
Changing them into italian I get message:
You can only maintain the object in modification
lang. German (DE) in this system
If I proceed in translating the german text in italian, I get italian texts instead of german.
Some ideas ?
Thanks Gerd

Use [SE63|https://www.sdn.sap.com/irj/scn/advancedsearch?query=se63&cat=sdn_all].([Translating Objects Directly|http://help.sap.com/saphelp_nw04/Helpdata/EN/41/71601b3ab0f34a8e00aa01338c68f3/content.htm]) else work on a system where italian language is installed.
Regards

Assigning a function code to radio button in 4.5B

Ive a requirement wherein I need to trigger the PAI event in a module pool program when I select a particular radiobutton in a group and do some processing subsequently.
For this I need to assign a function code to the radiobutton group.
But the function code field is disabled for input in the properties screen of the layout. Our client system is SAP 4.5B.
I am able to assign function codes to radio button groups in esuides(4.6C) and other systems.
I want to know whether we can assign a function code at all to a radio button group in version 4.5B.
If so, please tell me how to do this.
With regards,
ramu.

Hi,
we can't assign function codes to radio buttons.
for assigning some code to radio button.check the radio button status.
in PAI.
if RAD1 = 'X'.
xxxxxxxxxxx.
xxxxxxxxx.
elseif RAD2 = 'X'.
xxxxxxxxx.
xxxxxxxxxxxx.
endif.
regards,
bharat.

"Function code cannot be selected" error while uploading a document.

Hi,
When we try to upload a document into SAP the user is getting the error "Function code cannot be selected". Detailed error is given below. Only one user is facing this error in PRD. For all other users it is working fine. We replicated the same issue in testing systems and it is working fine there with the same user's id.
The detailed error is,
No batch input data for screen SAPLF040 0300
Message no. 00344
Diagnosis
The transaction sent a screen that was not expected in the batch input session and which therefore could not be supplied with data.
Possible reasons:
1. The batch input session was created incorrectly. The sequence of screens was recordly incorrectly.
2. The transaction behaves differently in background processing in a batch work process than when running in dialog (SY-BATCH is queried and changes the screen sequence).
3. The transaction has undergone user-specific Customizing and therefore certain screens may be skipped or processed differently, according to the current user. If the person who created a batch input session is not the same as the person now processing it, this problem may occur frequently.
System Response
None.
Procedure
For 1: Either re-create the session or process it in expert mode. Correct the batch input program.
For 2. It is very difficult to analyze this problem, particularly in the case that the screen sequence or the display-only options of fields differ according to whether the transaction is being processed in the background or as an online dialog. It could also be that this kind of transaction cannot run with batch input.
For 3: Have the creator of the session process it. If no error occurs now, then this is a program with user-specific Customizing.

Hi Amar,
I am facing the same issue while processing Vendor master inbound idocs, Few Idocs gone in error with error message "Function code cannot be selected".
Could you please suggest any solution found for the same.
Thanks in advance
Shivam

ALV-Grid: Is it possible to catch "LOCAL Function Codes" in any Event ??

Hi,
is it possible that i can catch a "Local Function Code" in ALV Grid with an Event??
For example if you click to an Grid Button on the toolbar than it must call an Event!
..........BUTTON: Local APPEND (existing in ALV Toolbar)
Function Code: '&LOCAL&APPEND'
My Idea is:
--- IF i click to the Button "Local APPEND" in the ALV toolbar, than it must after this command give me an Message( "It was Successfull" ).
But the "Local Function Codes" dont called the Event "User_command" OR "After_user_command" is there any other Event for this "Local Function Codes"???
Have anyone an idea?
Thanks in forward.
Ersin

Hi,
See following thread.
http://scn.sap.com/thread/715996
Thanks
Santosh

How to change the Partner function code in Quotation

Hi All,
We have a requirement that whenever a Quote is cancelled,
We need to change one of the function codes in the partner tab and also the user status should be changed.
Can anyone give a quick solution on this?
Your response will be appreciated.
Thanks in advance.
Regards,
Ramya

You will best implement this as an action (tx. SPPFCADM), which is called on changing the status to cancelled. In this action you can call a function module changing the partner functions using e.g. CRM_ORDER_MAINTAIN as the appropriate function module.
Regards, Kai

How to trap the two function code in the bdc

Dear All,
I have a bdc program now i need to pick up function code based on some condition. means if some condition then goto one function code and else don't go. I tried it but not working. It is working in shdb but not in the program.
eg.
 if not zcontract_no is initial.
 perform bdc_dynpro using 'SAPMZW_CREATE_SALES_ORDER_STD'
 '9000'.
 perform bdc_field using 'BDC_CURSOR'
 'P_CONTRACT'.
 perform bdc_field using 'BDC_OKCODE'
 '=COPY'.
 endif.
perform bdc_field using 'BDC_OKCODE'
 '=SUBMIT'.
Please suggest.
Regds,
Anup

Hi ,
 In your second case u r not specifying the BDC DYNPRO screen number , your code should be
if not zcontract_no is initial.
perform bdc_field using 'BDC_OKCODE'
'=COPY'.
else..
perform bdc_field using 'BDC_OKCODE'
'=SUBMIT'.
endif.
Kunal

How to get the partner function code by partner function?

For example, I need to know the partner function code for 'Reported By' and it's 'SLFN0002', How can I get this information by abap code?
Best regards,

Hey Blake,
You can look up CRMC_PARTNER_FT( Db table ) which is used in the above maintainance view...
Use select stmt to populate an internal table.. then use Read Table( which key DESCRIPTION = < Sold to party > and so on...
Just Get an Abaper and things would be easy..
Reward points for usefull posts..
Regards,
Anand

Error in Module pool:Function code

Hi All,
I am using IW52 transacion for which I have activated the Screen exit and inserted table control on it.
The table control entries has to be deleted for which I have added a Delete button with function Code 'DELE'.
When trying to delete the entry the system throws an error message saying that 'The function code DELE is not available here'.However after pressing enter the entries are deleted.
I have debugged for the error and could find that the table T185F is being checked in the function module screen sequence.
Could someone please let me know how to customize the table with the function code I have added.
Thanks.
Arvind

Hi Neha,
The link says that we cannot enter Custom User command in the SAP Screen exit.But I think there is a way to maintian T185* table in VFBS transaction.
I tried the same and now not getting the error message that "Function code XXX is not available here".
The problem is now that the system is always keeping the OLD sy-ucomm value.That is when I press delete records I get a confirm prompt message ( custom ) and record gets deleted.After this I again press enter the pop up comes again.
I checked in de bugging and found that the sy-ucomm was not cleared.I tried to clear sy-ucomm values but the main program of the transaction again resets the Sy-ucomm.
Please let me know if you or anyone has any solution to deal with this.
Thanks.
Arvind
Edited by: Arvind Soni on Jan 19, 2009 11:34 AM
Edited by: Arvind Soni on Jan 19, 2009 11:34 AM

Function code for dropdown on OO ALV Grid to trigger user_command

Hi Experts,
I know we can add a dropdown to a column of an OO ALV Grid, set values to the dropdown list and allow the user to select some these values.
However , what I'm not sure is that if we can *assign a function code to the dropdown * which would then trigger the event user_command ( PAI ) of the ALV class so I can handle the changes to when a particular value is selected from a dropdown list, just like we do in normal dialogs.
Now I know that I can register the 'Enter' event and handle the data changes in data_changed event, but that is something I want to avoid the user from doing as far as possible to make the report more user friendly.
Awaiting your valuable inputs and would really appreciate your help.
Thanks & regards,
Advait

Hi Advait,
No problem. Yes, this functionality requires changing the focus to other cell.
I think there is other solution. As the dropdown is kind of F4 activity try this way:
data: it_f4 type lvc_t_f4,
        wa_f4 type lvc_s_f4.
        wa_f4-FIELDNAME = 'CONNID'.
        wa_f4-REGISTER = 'X'.
        wa_f4-GETBEFORE = 'X'.
        wa_f4-CHNGEAFTER = 'X'.
        append wa_f4 to it_f4.
"register F4 event
CALL METHOD g_alv_grid_ref->register_f4_for_fields
    EXPORTING
      it_f4 = it_f4.
"Once you try to pick the value HANDLE_DATA_CHANGED event will be triggered
"Definition
     methods:
     handle_data_changed FOR EVENT data_changed OF cl_gui_alv_grid
                              IMPORTING er_data_changed e_onf4 e_onf4_before e_onf4_after,
"Implementation
METHOD handle_data_changed .
    DATA: ls_mod_cells TYPE lvc_s_modi.
    IF e_onf4_before = 'X'.
      MESSAGE 'Data changed before F4' TYPE 'I'.
    ENDIF.
    IF e_onf4 = 'X'.   "if event triggered by F4
      MESSAGE 'Data changed on F4' TYPE 'I'.
    ENDIF.
    IF e_onf4_after = 'X'.
      MESSAGE 'Data changed after F4' TYPE 'I'.
    ENDIF.
   "here you know which cell was modified
    LOOP AT er_data_changed->mt_mod_cells INTO ls_mod_cells.
     "just example test case, here you can implement your code for modified cells
      IF ls_mod_cells-value >=5.
        CALL METHOD er_data_changed->add_protocol_entry
          EXPORTING
            i_msgid     = 'SABAPDOCU'
            i_msgty     = 'E'
            i_msgno     = '888'
            i_msgv1     = 'Only numbers below 5 are possibe'
            i_msgv2     = 'Please correct'
            i_fieldname = ls_mod_cells-fieldname
            i_row_id    = ls_mod_cells-row_id.
        CALL METHOD er_data_changed->modify_cell
          EXPORTING
            i_fieldname = ls_mod_cells-fieldname
            i_row_id    = ls_mod_cells-row_id
            i_value     = space.
      ENDIF.
    ENDLOOP.
ENDMETHOD.                    "handle_data_changed
This approach works fine for picking value from input help. Never tried it for dropdown list. You have to try it out.
Regards
Marcin

Function codes in BADI

Similar Messages

Maybe you are looking for