Function DB6_PLAN_STOP_BATCH failed
Dear All,
Suddenly in db13 Category-DB collectors in there 0 Clean_Plan job are Scheduled , we I am going to delected it is given below error .Please suggest
@5C\QRed LED; stop; errors@ SOL Function DB6_PLAN_STOP_BATCH failed with return code = DB error
@5C\QRed LED; stop; errors@ SOL An error occurred when processing system
@5C\QRed LED; stop; errors@ SOL Function DB6_PLAN_DELETE_BATCH failed with return code = DB error
Regards,
Kumar
Hi,
Check SAP Note 1088211 - DBACOCKPIT: Error when editing planned actions.
Thanks
Sunny
Similar Messages
-
Crystal Report XI u2013 Multi Thread - function PEOpenEngineEx failed. Reason:
In Crystal Report XI u2013 Multi Thread - function PEOpenEngineEx failed. Reason: Report engine not opened
Hi
I am using Crystal report XI with Delphi 7
OS: Windows XP.
Delphi 7
CR Version: Crystal Report XI
In Crystal Report XI While calling PEOpenEngineEx() by setting Engine option as multi thread, It failed with error message u201CError:512 Report Engine Not Openedu201D
Code Change in Delphi 7 UCrpe32.pas (Crystal Reports XI Release 1 - Service Pack 3 and Service Pack 4)
aEngineOptions.openEngineType := PE_OE_MULTI_THREADED;
FEngineOpened := FCrpeEngine.PEOpenEngineEx(EngineOptions);
I tried the same with Crystal Report 8.5 (above mentioned code change) Function PEOpenEngineEx() working fine.
How to overcome this error to make work Multi Thread using CR XI?I found that it is bug Release 2 and the script server_patch_xir2 resolved it.
-
hello All,
when I try to delete or edit any DBA Job in transaction DB13 the following error is displayed:
An error occurred when processing system
Function DB6_PLAN_DELETE_BATCH failed with return code = Job error
How can I fix this error and delete or change my DBA jobs?
My syste is SAP ECC 6.0 SR3 - Solaris 10 - Oracle 10.2.0.4.0
Thanks
HernandoHello Hernando,
Let's see what this SAP Note says,
Note 1093883 - ORACLE: Function module DB6_PLAN_ADD_BATCH fails
Edit: However, 'valid release' makes confusion
Regards
Subbarao
Edited by: subbarao chinta on Oct 8, 2009 9:00 PM -
Hi
while trying to execute CHECKDB in Db13 i was getting the following error message
My Operating system is windows 2003 database oracle 10g
already referred to notes 952080, 134592 and subsequent notes
E:\ORACLE\NPE\ORIGLOGA\CNTRL\CNTRLNPE.DBF 26066944 4 FILE NOLINK
E:\ORACLE\NPE\ORIGLOGB\CNTRL\CNTRLNPE.DBF 26066944 4 FILE NOLINK
D:\ORACLE\NPE\SAPDATA1\CNTRL\CNTRLNPE.DBF 26066944 3 FILE NOLINK
BR0982I Database disk volumes
Directory / Raw disk Device Total[KB] Free[KB] Used[%] MaxNeed[KB] MaxMiss[KB]
BR0252E Function _stat() failed for 'D:\oracle\EO1\102' at location BrDiskStatGet-1
BR0253E errno 2: No such file or directory
BR0277E Determination of disk volume status for D:\oracle\EO1\102 failed
BR0806I End of BRCONNECT processing: ceadprqb.chk 2009-03-17 18.06.25
BR0280I BRCONNECT time stamp: 2009-03-17 18.06.25
BR0804I BRCONNECT terminated with errors
if any faced simlar problem, please give let me know if you have a solution.
Regards
HMHello,
this type of error happens when there are permission problems. Check permission of BRtools
Check the permission of files..Check the link below for more information :
http://www-01.ibm.com/support/docview.wss?rs=667&context=SSZHVN&dc=DB560&dc=DB520&uid=swg21327498&loc=en_US&cs=UTF-8&lang=en&rss=ct667tivoli
Thanks
Anju -
BR0252E Function mkdir() failed for adding the data file
Dear experts.
I assigned new file to data file, i face below error
BR0280I BRSPACE time stamp: 2010-12-15 10.38.26
BR0681I Enter string value for "file" (<file>|<sapdata>|<N>) [/oracle/DBP/sapdata7/sr3_70/sr3.data69]:
/oracle/DBP/sapdata8/sr3_70/sr3.data69
BR0280I BRSPACE time stamp: 2010-12-15 10.38.46
BR0683I New value for "file": '/oracle/DBP/sapdata8/sr3_70/sr3.data69'
Error
BR0252E Function mkdir() failed for '/oracle/DBP/sapdata8/sr3_70' at location BrDirCreate-1
BR0253E errno 13: Permission denied
Regards,
kalees>>BR0252E Function mkdir() failed for '/oracle/DBP/sapdata8/sr3_70' at location BrDirCreate-1
Make sure the sapdata8 is owned by ora<SID> and dba group.
and you are adding the datafile using ora<SID> userID. -
Hi all,
I am working on setting up the DB13/BRTOOLS integration.
I am trying to run a db check from sidadm user through brtools and getting the below error.
BR0280I BRTOOLS time stamp: 2014-04-24 09.35.56
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0252E Function fopen() failed for '/oracle/PB1/sapbackup/.user.pas' at location BrToolCall-2
BR0253E errno 13: Permission denied
I changed the permissions for br* to 755 as below
but still I am getting the same error.
ustrlxpb1db80:pb1adm 73> ls -l br*
-rwxr-xr-x 1 pb1adm sapsys 5736689 Sep 7 2011 brarchive
-rwxr-xr-x 1 pb1adm sapsys 5854578 Sep 7 2011 brbackup
-rwxr-xr-x 1 pb1adm sapsys 7577045 Sep 7 2011 brconnect
-rwxr-xr-x 1 pb1adm sapsys 6279708 Sep 7 2011 brrecover
-rwxr-xr-x 1 pb1adm sapsys 2227868 Sep 2 2011 brrestore
-rwxr-xr-x 1 pb1adm sapsys 8033945 Sep 7 2011 brspace
-rwxr-xr-x 1 pb1adm sapsys 3090793 Sep 2 2011 brtools
What might be the issue?
Thanks
vimalHi Gaurav,
Thanks for your information.
I changed the persmissions for sapbackup and sapcheck to 775 and I can able to start the dbcheck via brtools through sidadm user.
But it got stuck with a below sql error , with insufficient privileges
BR0280I BRTOOLS time stamp: 2014-04-24 10.36.06
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0801I BRCONNECT 7.20 (17)
BR0805I Start of BRCONNECT processing: censafis.chk 2014-04-24 10.36.06
BR0484I BRCONNECT log file: /oracle/PB1/sapcheck/censafis.chk
BR0477I Oracle pfile /oracle/PB1/112_64/dbs/initPB1.ora created from spfile /oracle/PB1/112_64/dbs/spfilePB1.ora
BR0280I BRCONNECT time stamp: 2014-04-24 10.36.08
BR0813I Schema owners found in database PB1:
APPQOSSYS, DBSNMP, DIP, OPS$ORAPB1, OPS$PB1ADM, OPS$SAPSERVICEPB1, ORACLE_OCM, OUTLN, SAPSR3*, SYS,
SYSTEM
BR0280I BRCONNECT time stamp: 2014-04-24 10.36.09
BR0814I Number of tables/partitions in schema of owner SAPSR3: 25128/247
BR0836I Number of tables treated as info cubes for owner SAPSR3: 1676
BR0814I Number of tables/partitions in schema of owner SYS: 890/298
BR0814I Number of tables/partitions in schema of owner SYSTEM: 151/39
BR0280I BRCONNECT time stamp: 2014-04-24 10.36.12
BR0815I Number of indexes/partitions in schema of owner SAPSR3: 33103/502
BR0815I Number of indexes/partitions in schema of owner SYS: 965/242
BR0815I Number of indexes/partitions in schema of owner SYSTEM: 212/52
BR0280I BRCONNECT time stamp: 2014-04-24 10.36.13
BR0816I Number of segments in schema of owner DBSNMP: 8
BR0816I Number of segments in schema of owner OPS$PB1ADM: 1
BR0816I Number of segments in schema of owner OUTLN: 9
BR0816I Number of segments/LOBs in schema of owner SAPSR3: 21553/2395
BR0816I Number of segments/LOBs in schema of owner SYS: 2714/144
BR0816I Number of segments/LOBs in schema of owner SYSTEM: 407/22
BR0280I BRCONNECT time stamp: 2014-04-24 10.36.13
BR0961I Number of conditions found in DBCHECKORA: 128
BR0280I BRCONNECT time stamp: 2014-04-24 10.36.13
BR0301E SQL error -1031 at location BrDbdiffRead-1, SQL statement:
'PREPARE stmt_5 FROM'
'SELECT OBJNAME FROM "SAPSR3".DBDIFF WHERE DBSYS IN ('ORACLE', ' ') AND OBJTYPE = 'TABL' AND DIFFKIND IN ('02', '61', '99') ORDER BY OBJNAME'
ORA-01031: insufficient privileges
BR0806I End of BRCONNECT processing: censafis.chk 2014-04-24 10.36.13
BR0280I BRCONNECT time stamp: 2014-04-24 10.36.13
BR0804I BRCONNECT terminated with errors
BR0292I Execution of BRCONNECT finished with return code 3
Thanks
Vimal -
BR0252E Function remove() failed
While trying to extend the tablespace (PSAPCRM), I encounter an error :
BR1001I BRSPACE 7.00 (40)
BR0252E Function remove() failed for '/oracle/SID/sapbackup/.user.pas' at location global_set-5
BR0253E errno 13: Permission denied
BR0700E Fatal errors occurred - terminating processing...
BR1008I End of BRSPACE processing: seadhacx.log 2009-03-15 22.45.39
BR0280I BRSPACE time stamp: 2009-03-15 22.45.39
BR1007I BRSPACE terminated with errors
Any clues pls ?
Regards
ShajiHi Jacob,
Can you tell us with which user you are running?
I think there are some file permission are missing with that user id.
Please follow SAP NOTE 113747 to give sufficiant access privillages for BRTOOLS.
Regards
Nick Loy -
Dear All,
I am getting error log in sm21.Please guide.
Time Ty. Nr Cl. User Tcod MNo Text Date : 04.09.08
04:55:27 DIA 000 600 BASIS R49
Details
Recording at local and central time........................ 04.09.2008 04:55:27
Task................ 06664 / Dialog work process No. 00
User................ BASIS
Client.............. 600
Terminal............ 192.168.
Session............. 1
Transaction code....
Program name........ SAPMSSY1
Problem class....... K SAP Web AS Problem
Development class... STSK
Further details for this message type
Module name......... thxxcpic
Line................ 3582
Error text.......... 027242
Caller.............. ThCPICS
Reason/called....... CPIC-Er
Documentation for system log message R4 9 :
A CPIC function has failed. The conversation ID and CPIC function are
specified in the system log entries. Use the conversion ID to find
more detailed information about the error in the system log for the SAP
gateway.
Meaning of the SAP return codes:
1) Gateway errors:
221,,Error in CPIC-SS
222,,Storage bottleneck
223,,Network read error
224,,Network write error
225,,Invalid request
226,,No connection yet
227,,Gateway process terminated
228,,Shared-Memory problem(read)
229,,Shared Memory problem(write)
230,,No free LU
231,,No free gateway process
232,,Error when starting gateway proc.
233,,Incorrect communication type
234,,Connection setup failed
235,,Error in comm. table
236,,No connection to gateway
237,,Connection to gateway closed
238,,Error in GW command (write)
239,,Error in GW comm. (read)
240,,Invalid length
241,,Invalid environment
242,,Timeout
243,,Error setting up R/3 conn.
244,,Partner has closed connection
245,,Storage overflow
246,,Incorrect APPC header version
247,,APPC server not started
248,,Error accessing TXCOM
249,,Comm. table is full
630,,Invalid mode no. received
631,,Max.no. of gateways reached
632,,No LU specified
633,,Max.no. of clients reached
634,,Invalid TP name
635,,fork failed
636,,Invalid NI handle
637,,rexec failed
638,,TP start failed
639,,NiDgSend failed
640,,Internal error
664,,Gateway host is unknown
665,,Gateway service unknown
666,,NI error
667,,exec failed
668,,R/2 restarted
669,,Symb. destination too long
670,,No more side-info entries
Errors in the CPIC interface:
450 ,,No storage
451,,No side-info entry
452,,TP-START failed
453,,No initialization
454,,"getlu" failed
455,,"signal" failed
456,,Timeout during conn. setup
457,,CMALLC failed
458,,CMSEND failed
459,,Prepare-To-Receive failed
460,,"mc_flush" failed
461,,CMRCV failed
462,,Argument missing
463,,"get_allocate" failed
464,,CMDEAL failed
465,,TP-END failed
466,,Max.no.of conv. reached
467,,"snaopen" failed
468,,"snactl" failed
469,,No flush in IBM environment
470,,"snaclse" failed
471,,Status error
472,,No side-info entry
473,,No conversation
474,,Connection closed manually
475,,Connection closed automatically
476,,No partner found
477,,Confirm failed
478,,Confirmed failed
479,,GWHOST not in side-info entry
480,,GWSERV not in side-info e.
481,,PROTOCOL not in side-info entry
482,,LU not in side-info e.
483,,TP not in side-info entry
484,,No conn.to gateway
485,,gethostname failed
486,,SAP_CMACCP not executed
487,,Program not in argument list
488,,Host not in argument list
489,,Service not in argument list
490,,Conv-ID not in argument list
491,,Invalid parameter
492,,LU62CVCT failed
493,,LU62ATTCH failed
494,,No CONV table
495,,Incorrect conv.table
496,,Invalid conv modification
497,,NiHostToAddr failed
498,,NiAddrToHost failed
499,,Read operation tab.THOST failed
Technical details
File................ 006117
Position............ 0000025380
Entry type.......... m ( Error (Function,Module,Row) )
Message ID.......... R4 9
Variable parts...... 027242 ThCPICSCPIC-Erthxxcpic3582
Thanks,
KumarHi An
In the disp log. i have read note 124562 .
ERROR => DpRqCheck: T132 in stat TM_SLOT_FREE [dpxxdisp.c 5754]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 4570]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 3168): [dpxxdisp.c 4572]
-IN-- sender_id ICMAN tid 132 wp_ca_blk -1 wp_id -1
-IN-- action SEND_TO_DP uid 13629 appc_ca_blk -1 type NOWP
-IN-- new_stat NO_CHANGE mode 0 len -1 rq_id 8195
-IN-- req_info DP_SOFT_CANCELDP_ICM_EVENT
ERROR => invalid MPI handle: 0 [mpixx.c 2201]
ERROR => invalid MPI handle: 0 [mpixx.c 2201]
SoftCancel request for T63 U13628 M0 received from ICMAN
ERROR => DpRqCheck: T63 in stat TM_SLOT_FREE [dpxxdisp.c 5754]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 4570]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5144): [dpxxdisp.c 4572]
-IN-- sender_id DISPATCHER tid 63 wp_ca_blk -1 wp_id -1
-IN-- action SEND_TO_WP uid 13628 appc_ca_blk -1 type DIA
-IN-- new_stat NO_CHANGE mode 0 len 0 rq_id 8199
-IN-- prio HIGH
-IN-- req_info DP_SOFT_CANCEL
Fri Sep 05 07:49:57 2008
DpHdlDeadWp: restart wp (pid=3172) automatically
DpHdlDeadWp: restart wp (pid=3252) automatically
Thanks,
Kumar -
Since Mavericks, the scroll-with-modifier-key-to-zoom functionality often fails, and I have to deselect it and reselect it in the accessibility pref-pane to get it working again.
Take it to your local Apple Store or AASP, it's covered by a 1 year hardware warranty. If you have AppleCare then give them a call but I'm pretty sure they will advise the same. If you have not purchased AppleCare yet please do, this will extend the warranty to 3 years however it MUST be purchased within the first year of ownership. Let it go 366 days and you are out of luck. AppleCare will also include telephone support too.
Good luck. -
Adapter function [fconnect] failed
Hi All,
I am using FDM 11.1.2.1 in a distributed architecture. With FDM Web Manager is installed on one machine and other components are installed on the other server , using installation by tier option.
Everything is working fine including HFM & Financial Reporting.
I have created the FDM application on the server having components such as Application Server , Load Balance & Task Manager Configuration.
While accessing the application from Web Interface i am getting the following error.
*Getting error : " Adapter function [fconnect] failed " while trying to access Activities---> Maps.*
I have tried almost everything but no luck.
I have registered the adapter using fm11xge.dll file .
Every server is configured using same Administrator user.
Can any one help me out to resolve this error.
Thanks in Advance.You need to both register and configure the adapter. The adapter runs as a com+ application on the FDM server and requires that the service account be set on the identity tab in order to properly launch the adapter and connect to HFM. You can configure the adapter via the workbench client:
a) Expand Target System Adapters > FM11x-G5-E
b) Right-Click on the adapter and choose Configure
c) Enter the FDM Service account uid/pwd/domain values and click OK
This will set the identity on the com+ application and allow for FDM to integrate with HFM successfully via the connect action. -
So what is up with this error message in Muse?
MuseJSAssert: Error calling slector function:SecurityError: Failed to read the ‘contentDocument’ property from ‘HTMLIFrameElement’: Blocked a frame with orign “null” from accessing a cross-origin frame.This is a genuine security error generated by the browser when viewing a page with iFrame content locally.
Please refer to Zak's reply in the following thread: https://forums.adobe.com/message/6496180#6496180
Cheers,
Vikas -
The function PEOpenEngineEx fail
Hi,
I have BO XI SP 2 installed on linux server.
In /var/log/messages all the time below errors are writing:
Sep 11 15:19:26 stcrep2 boe_pagesd[30273]: The function PEOpenEngineEx failed. Reason: Report engine not opened..
Sep 11 15:19:26 stcrep2 boe_pagesd[5889]: Error in the report processing unit.
Sep 11 15:19:26 stcrep2 boe_pagesd[5889]: A Page Server subprocess was forced to terminate.
Sep 11 15:19:26 stcrep2 boe_pagesd[5889]: A Page Server subprocess was forced to terminate.
Sep 11 15:19:26 stcrep2 boe_pagesd[5889]: An error occurred while creating a Page Server subprocess.
Sep 11 15:19:36 stcrep2 boe_pagesd[30307]: The function PEOpenEngineEx failed. Reason: Report engine not opened..
How to correct BO server?
I will appreciate for help.
Regards
AnetaI found that it is bug Release 2 and the script server_patch_xir2 resolved it.
-
The MDX function CURRENTMEMBER failed because the coordinate for the attribute contains a set
How to handle this error: The MDX function CURRENTMEMBER failed because the coordinate for the attribute contains a set. when executing MDX query:
SELECT (
{ [Measures].[Amount]}
)ON COLUMNS,
[OrganizationUnits].[Description].[Description].MEMBERS,
[OrganizationUnits].[IsCURRENT].[IsCURRENT]
) ON ROWS
FROM
(SELECT [OrganizationUnits].[Description] ON 0
FROM
[CubeName]
WHERE(
{[OrganizationUnits].[Description].&[Unit1],[OrganizationUnits].[Description].&[Unit2]}
Thanks!!Hi Arth81,
Please try the query below.
WITH MEMBER MEASURES.IsCURRENT AS [OrganizationUnits].[IsCURRENT].[IsCURRENT].CURRENTMEMBER.NAME
SELECT
{ [Measures].[Amount],MEASURES.IsCURRENT} ON COLUMNS,
{[OrganizationUnits].[Description].[Description].MEMBERS,
} ON ROWS
FROM
(SELECT [OrganizationUnits].[Description].MEMBERS ON 0
FROM
[CubeName]
WHERE(
{[OrganizationUnits].[Description].&[Unit1],[OrganizationUnits].[Description].&[Unit2]}
Regards,
Charlie Liao
TechNet Community Support -
Expose / Spaces function(s) fail to work with mouse buttons, ongoing issue
Please see this now very old thread:
http://discussions.apple.com/thread.jspa?threadID=2131775&start=0&start=0
This is an issue as old as snow leopard itself. The problem varies in that it can effect spaces or expose. When using a non-apple mouse, one or more of these functions will fail to perform with a mouse button indefinitely as soon as a restart has taken place.
In my particular case, whatever mouse button I assign to "show desktop" fails to function entirely after a restart has taken place. This remains true even if I re-apply the setting in system preferences, such as changing it to another button, or changing it to nothing, and back. I can still use keyboard shortcuts and screen corners to activate "show desktop". I can continue to use other expose and spaces features with the properly assigned mouse keys. Only one feature, in my case "show desktop", fails to function with -any- mouse button after a restart.
To make this even more clear, this behavior has remained the same and consistent for the 14 months I've had snow leopard. It has even continued to exist after I recently removed and recreated my HFS+ partition, and re-installed OS 10.6, entirely from scratch. It did not exist whatsoever for the year and a month I had OS 10.5 leopard, before upgrading to 10.6. This behavior was +literally introduced upon installing snow leopard+. I have a razer death adder 1500 DPI mouse.
Several others share the exact same symptoms, with only the affected expose/spaces function and mouse model differing. A sibling of mine experienced the +exact same issue+ with an entirely different mac model and the exact same model of mouse.
As a relatively unimportant aside, certain "tricks" seem to fix the issue, but only temporarily (one involves moving the location of spaces and/or expose out of the utilities folder, another involves deleting "com.apple.symbolichotkeys.plist" from ~/Library/Preferences). Unfortunately, these tricks:
A. always only fix the problem temporarily, the issue returns
B. do not address whatever is causing the issue in the first place
This is really frustrating quite a few people, as the linked-to thread can attest to. Along with the obvious, this frustration is magnified because:
A. This issue +does not appear+ to involve terribly challenging technical difficulties (i.e., merely mouse button behaviors).
B. This issue did not seem to exist before OS 10.6.
C. This issue, with the previous two points above in mind, has remained unaddressed for 14-plus months - the entire duration of Mac OS 10.6 snow leopard. I myself originally figured a reasonable time for this issue to be addressed & resolved would be a matter of +a few days+, weeks at most, and at the very least, thought I'd be using these beloved features again +well over a year ago+.
To put it frankly, what the %$#&? Why hasn't this been addressed yet?
Message was edited by: -DrD-
Message was edited by: -DrD-Anyone even care? I submitted this as feedback to apple, and haven't got a reply through that route, either.
-
Hi ALL!!!
I am trying to Export Data from FDM to HFM and clicked "Export" option and getting below error.
Error: Adapter function [fConnect] failed.
Detail: Stacktrace:
upsWBlockProcessorDM.clsBlockProcessorClass.ActLoad(strLoc[String], strCat[String], strStartPer[String], strEndPer[String], strFile[String], objLoadParam[Object&], blnNoRaiseEvents[Boolean], lngMarshalType[Int32])
Hyperion.FDM.Dialogs.TargetSystemLoadDialog.buttonOK_ServerClick(sender[Object], e[EventArgs])
And followed the John suggestions through this Link (http://epm.jonhwilliams.com/adapter-function-fconnect-failed-fd/), All the checks are good, But still issue has not been resolved.
Could some one please suggest your valuable inputs.
Thanks,
RSVCan you check if the integration options "Use SSO" and "Enable Sticky Server" are set to on?
Maybe you are looking for
-
How much RAM should I add to my 2008 iMac?
Hi everybody, I currently own an 20-inch Early 2008 iMac, and I was wondering what would be the best RAM upgrade for what I use the computer for. At the moment, I have 2GB of RAM and I'm running Mavericks, and I can tell that it isn't as fast as Snow
-
Non-anonymous FTP setup on Solaris 8
I'd like to set up FTP access on my Solaris 8 (Sparc) box. However, I don't want people to use real system accounts on the server to log in. Is it possible? For example, on Widnows platform, I can install WS_FTP Server from IPSwitch, which maintains
-
One app, two different Apple Dev accounts ... Will it work?
Building a standalone/single-issue viewer app for a client. We've asked to be invited to join their Apple Dev team, but the client proposes this workflow instead: Scenario 1 • We use OUR iOS Provisioning Portal/Apple Dev account to generate all the c
-
I have a JMS server deployed to one of the instances in my 2 instance cluster. I have an MDB attached to a queue on the JMS server (NOT a distributed destination). If I run both weblogic instances on one physical server,
-
Consider planned delivery time field in MRP Areas
Hi, I would like to know if the "Consider Planned Delivery Time" field in the MRP areas is taken into the scheduling of materials during MRP run? From the help documentation, it seems to be yes. Otherwise the system will take the Planned Delivery Tim