Function Db6pmcf which cannot be accessed.Reason code:5 error in DB6COCKPIT

Hi,
We have 4.6C systems running on AIX 5.3 and DB2. recently I updated the kernel from patch level 2225 to 2307. (Both OS and DB are 64 bit) The DEV and QAS systems were running successfully but I got a problem in PRd systems. I am having error in DB6COCKPIT. I am pasting the exact error here.
-f 14 -p  0 -c U
External program terminated with errors
CLI error
ERRORMESSAGE: Error -444 in dmdb6rd5.c(752):
DB6CliFetch(): [IBM][CLI Driver][DB2/AIX64] SQL0444N  Routine
"DB6PMCF" (specific name "SQL070920161003900") is implemented with
code in library or path "/usr/sap/PRD/SYS/exe/run/db6pmudf", function
"Db6pmcf" which cannot be accessed.  Reason code: "5".
SQLSTATE=42724
External program terminated with exit code 31
-f 17 -p  0 -c U -o env
External program terminated with errors
CLI error
ERRORMESSAGE: Error -444 in dmdb6rd5.c(438):
DB6CliFetch(): [IBM][CLI Driver][DB2/AIX64] SQL0444N  Routine
"DB6PM_LST" (specific name "SQL070920161002400") is implemented with
code in library or path "...p/PRD/SYS/exe/run/db6pmudf", function
"Db6pm_lst" which cannot be accessed.  Reason code: "5".
SQLSTATE=42724
External program terminated with exit code 31
Please reply me back ASAP. This is very urgent.

This issue was solved.

Similar Messages

  • Media card cannot be accessed due to fatal errors.

    I keep getting that message and ive tried pulling the battery....What happened was i did a battery pull because my phone was frozen and then when i put it back in the media card stopped working. What can i do to solve this?!
    I have searched everywhere......

    Hi and Welcome to the Community!
    Here is a KB that discusses that error:
    KB14745 "Memory card contains error, please use disk checking utility on computer" appears on the Home screen of the BlackBerry smartphone
    Hopefully it contains something useful! You might have to use a media card reader on a PC rather than directly through the tethered BB.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • No accessable label --code inspecter error

    Hi,
    Here the part of my selection screen.,
    parameter XYZ radiobutton group rad1 default 'X'.
    selection-screen comment 4(30) text-066.
    ...Every thing is working fine.,
    But, while doing the code inspecter check I am getting Radio button XYZ related errror, not sure how to rerctify that, here I am giving that error.,
    > Program ZABOVEPROGRAM screen 1000 I/O field (Inputfield) XYZ has no accessable label
    What to do? suggest me.,
    Thanks,
    Naveen Inuganti

    Hi.,
    Anyother answers?
    Here I am attaching my code once again...!
    selection-screen begin of block b2 with frame title text-065.
    selection-screen begin of line.
    parameter XYZ radiobutton group rad1 default 'X'.
    selection-screen comment 4(30) text-066.   "It conatins label for XYZ
    selection-screen end of line.
    selection-screen begin of line.
    parameter AB radiobutton group rad1.
    selection-screen comment 4(30) text-067.   "It conatins label for AB
    selection-screen end of line.
    selection-screen end of block b2.
    For XYZ and AB , I am getting same error at code inspecter checks,
    "Program ZABOVEPROGRAM screen 1000 I/O field (Inputfield) XYZ has no accessable label
    "Program ZABOVEPROGRAM screen 1000 I/O field (Inputfield) AB has no accessable label
    --Naveen Inuganti

  • What's this reason code of error mean?

    Date: Jun 14 10:49:57
    Machine Name: CUCMPUB
    Severity: Error
    App ID: Cisco CTIManager
    Message: CTIManager: 694021: CUCMPUB.concordia.ca: Jun 14 2012 14:49:57.486 UTC : %UC_CTI-3-CtiProviderOpenFailure: %[CTIconnectionId=694134][LoginUserId=xxx][Reason=-1932787617]

    Hi ,
    Please check the URL below
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a008069a26b.shtml
    TX,
    Shalu

  • Is there a way to hide some reason codes in dispute management without deleting?

    Within SAP Dispute management (UDM_DISPUTE) we would like to remove some of the available reason codes in the drop down on the search screen and available to assign drop down, but not physically delete them.  Is there a way to do this? 
    I know if I physically delete them out of the Reason code list (SPRO -> FSCM -> dispute management -> Dispute Case Processing -> Case types -> Create Values for Attribute "Reason") then if an old dispute case that used that reason code is displayed, the four digit number code will be displayed rather than the description.  So we would prefer to not physically delete the code / description from the reason codes but somehow make them non-display, or inactive. 
    Any thoughts on this?

    Hello Stephen,
    you may consider the functionality "personal list", putting all valid reason codes in and leaving out those you do not want to show. Maybe your Authorisation / Security Team can also help you performing this exercise for all affected users at once.
    Regards,
    Christoph

  • FBE1 multiple reason codes

    Dear Experts,
    In FBE1, We have two reason codes for deducting amount from bill amount. e.g. Bill correction amt and TDS. However, we have tried to enter it as new item. Along with payment amt we entered TDS and clicking on new item entered the correction amt and save the document. At the time of f-28, both deductible amount clubbed together and shown under TDS GL. That was wrong.
    Thanks in adv
    Ajeesh.s

    HI,
    1 From the list of intercompany transactions, select the transaction or transactions to which to assign a reason code and click Edit.
    Note: You can assign a reason code only to transactions with the MisMatched status.
    2 Take one of these actions:
    To assign a reason code to one transaction, from Reason Code, select a reason code.
    To assign a reason code to multiple transactions, enable the check boxes of all transactions, select Edit, then Set Reason Code, select a reason code and click Set.
    The reason code that you select is assigned to all the selected intercompany transactions.
    3 Click Save to save the changes.

  • Multiple reason codes in ICT HFM

    Dear all,
    We are implementing ICT Module for HFM 11.1.2.1 for one of our client. After the reconciliation by transaction ID and by Account, there have about hundreds of transactions that do not match and they have to enter reasons code.
    It seems that they have to enter reason codes transaction by transaction. Is it possible to select all the non matching transactions once and to assign the same reason code for all in one operation ?
    Thank you
    Best regards,
    Arnaud

    HI,
    1 From the list of intercompany transactions, select the transaction or transactions to which to assign a reason code and click Edit.
    Note: You can assign a reason code only to transactions with the MisMatched status.
    2 Take one of these actions:
    To assign a reason code to one transaction, from Reason Code, select a reason code.
    To assign a reason code to multiple transactions, enable the check boxes of all transactions, select Edit, then Set Reason Code, select a reason code and click Set.
    The reason code that you select is assigned to all the selected intercompany transactions.
    3 Click Save to save the changes.

  • Can we change the reason code?

    Hey Guys,
    Is it possible to change the reason code after the document is posted? i need the reason code field to be editable. I checked in the document change control rules and it doesnt let me enter reason code.
    Is there a way to change the reason code? or not?
    Thanks,
    Zaid Azam

    you cannot change the reason code once the document have been posted.

  • Unction modules which are related to transaction code (XD01 & VL01N)

    hi expects,
    can any body give me the function modules which are related to transaction code (XD01 & VL01N).please help me

    Hi Santosh,
    FM related to XD01 are :
    QPL1_INSPECTION_LOT_CREATE - for creating Inspection Lots
    BAPI_INSPECTIONPLAN_CREATE - for creating Inspection Points
    FM related to VL01N are :
    these are used for creating delivery
    WS_DELIVERY_UPDATE
    BAPI_OUTB_DELIVERY_CREATE
    BAPI_OUTB_DELIVERY_SAVEREPLICA
    BAPI_OUTB_DELIVERY_CONFIRM_DEC
    BAPI_OUTB_DELIVERY_SPLIT_DEC
    SHP_VL10_DELIVERY_CREATE
    Reagrds,
      Sunil

  • Procedure to changing reason codes

    Hi! We want to make some changes to the existing reason codes set up in the system. This involves deletion of some reason codes and addition of new ones. As we cannot delete the reason code since they are in use, I am wondering what is the best approach to achieve the same. Below are my thoughts and questions. Please kindly give you comments as to whether I am on the right track:
    1. Create new code group with the reason codes.
    2. Add the new code group to the existing code group profile.
    3. Set the status of the old code group to be 'No Longer In Use'.
    4. This means that the transaction type is still using the same subject profile except that it now has 2 code groups whereby one is no longer valid for use/
    I assume that in this case, the user will start seeing the new set of codes when they create the new transaction and the old codes under the old code group wouldn't appear.
    Is it correct to say that those existing transactions containing the old code will still work as per normal and that there is no downstream impact?
    Appreciate any help on the above.
    Cheers!
    SF

    No answer

  • BootCamp cannot load from disk code 5

    I tried to install Windows 7 using BootCamp from an ISO image DVD I made. Now when I restart my iMac, it takes me to a black screen with the "cannot load from disk code: 5" error message. The "option key" and "eject key" don't work at all and no matter how many times I restart it, it always goes back to this screen where I can't seem to press anything and the dvd is stuck. Please help.

    I burned my disc at 2 speed in Toast. Burned my XP iso like this too, and that worked (not on early 2011 mbp's)
    I even deleted the bootcamp partition and resized the osx partition to the max. That way i have a clean partition/install each time i trie. Used partition size is standard (20gb) so that shouldn't be an issue. And the iso i'm using for win7 is being used by al lot of others and they seem to have no problems and claim it to be a bootable disk.
    The only probable solution i've found is a workaround in which you launch your install from a different running OS, and go from there. However i'm not such a windows fan i got a full working pc. Just my mbp's so this really isn't an option and it seems a bit far off because i got a concrete error code.
    I'll try to get a copy of parallels to test my iso, but i don't want to emulate, i just need boot camp to work!

  • IdeaCenter A310, Cannot boot from CD – Code 5

    Installed a developers/trial version of Windows 8 on my A310, only it appears to have somehow completely removed my recovery partition.
    Now I have no working OS on the computer and when I attempt to boot with a Windows 7 CD to reinstall I get a 'Cannot boot from CD – Code 5' error.
    Why won't it boot from the CD? How can I reinstall Windows? Pleaseee help.

    Hi ToxicVoices and welcome to the forum,
    If you hit F12 at the bios splash screen, it should bring up a list of bootable devices. Does the cd drive show up there?
    If you hit F11, it should take you into the recovery environment if the recovery partition is still there.  If the recovery is still there, you should be able to restore from a backup up, (if you made a backup).  If no backup, you would have to restore to factory settings.
    Dave 
    T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    If someone helped you today, pay it forward. Help Someone Else!
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Reason Codes not displaying when performing emergency access management(SPM

    Hello guru,
    I am experiencing a little problem when using superuser privilege management (emergency access) functionality in AC 10.0.
    My problem is that the reason codes created in the AC system via the reason code link in the workcenter does not appear as drop down for me when I click on the logon button in the initial screen displayed in transaction SPM_GRAC.
    Suffice to say that i do not have any reason code to pick from in the drop down for superuser privilege management in the AC system when i logon with the firefighter user to perform SPM.
    Please help me out with your suggestions.
    Thanks

    Hello guru,
    I am experiencing a little problem when using superuser privilege management (emergency access) functionality in AC 10.0.
    My problem is that the reason codes created in the AC system via the reason code link in the workcenter does not appear as drop down for me when I click on the logon button in the initial screen displayed in transaction GRAC_SPM.
    Suffice to say that i do not have any reason code to pick from in the drop down for superuser privilege management in the AC system when i logon with the firefighter user to perform SPM.
    Please help me out with your suggestions.
    Thanks

  • Reason Code Functionality

    Dear All,
    Experts.
    I want to know about Reason Code. What is practical functionality of reason code ?
    Here is my understanding as follows :-
    Suppose I am posting one bill of Rs. 12,000/- against that I am receiving Rs. 14,000/-.
    So if I use reason code,  will my entry & effect like this ?
    Bank A/c Dr 14,000
    customer A/c Cr 12,000
    Exchange Gain A/c Cr 2,000
    ( Being exchange gain of Rs 2,000/- )
    For this functionality Reason code is used ?
    1 ) In addition to this will Rs 2,000 generate one more residual line item in customer account ? 2 ) or account will be clear?
    3 ) Where I can link the reason codes ? 4 ) It is at customer master level or document level  5 ) Reason code is Manual assignment or Automatic assignment ?
    Experts your help on this will be great.
    Regards,
    Sharvari Joshi.

    Dear,
    Chintan.
    Thank you again for focusing on my questions. Can I link the reason code to customer while taking the payment from F-28 ? 
    Or at any other T.code I need to use for using Reason Code ?
    1) Define reasons Codes
    2) Define accounts for payment differences
    3) Define std reason code for clearing w/payment advice notes.
    4) Define Reason code for conversion version
    5) Define conversion of payment differences reason code.
    are the only steps to configure reason codes ?
    Your help on this will be great.
    Regards,
    Sharvari Joshi.

  • Nowhere can input reason code in function BAPI_ACC_DOCUMENT_POST

    Hi.....
    Field Reason code is a required field for a G/L account,But it seems that nowhere can input it in function BAPI_ACC_DOCUMENT_POST's table parameter ACCOUNTGL.Thus I can use this function to create Accounting Document .....How can I solve it ? 
    Thanks

    Why do you put something in the 'extension1' segment ?
    What sort of doc do u post ?
    Message was edited by: Erwan LE BRUN

Maybe you are looking for