Function does not have a body

Hello, i have a problem running this program. an error "function does not have a body" pops up, do you guys know how i can fix this?
stop();
import flash.events.MouseEvent
start_.addEventListener(MouseEvent.CLICK, onClick);
function onClick(event:MouseEvent):void
gotoAndStop(1,"Scene 247");
gotoAndStop(1,"Menu");

no curly brackets holding the code:
try this
function onClick(event:MouseEvent):void {
gotoAndStop(1,"Scene 247");
gotoAndStop(1,"Menu");

Similar Messages

  • Using a dll function that does not have any inputs from a VI

    Hello all, I'm very new to Labview, I have wraped a dll library using the LVlib wizard and now I am trying to use it in a project.  I have a function that does not take any inputs or return any thing except that a struct is populated with some status information as part of the call.  I am able to draw a StartInterface VI because my void startInterface(const char* configFile, struct status_struct* status) takes the location of a configutation file as an input. But I can not figure out how to connect my Call Library Node to my a function vi that does not have any inputs ( void shutdownInterface(struct status_struct* status)). 
    Note that the status struct is deffined to be only and out put at the creation of the LVLIB.
    Thanks, Mike

    Thanks for the responses guys:
       I think I am aware of the conotations of inputs and outputs when I created the lvlib I specified the argument  struct status_struct* status as only an output instead of the default of input and output.
    I do not think that I am doing anything as complex as function callbacks. My immediate goal is to have an executable (I have application builder) with two buttons and two three text fields one text field for the input of the config file, two text-fields for a cstring that is contained in the status struct; one button to start the interface and one button to stop the interface. 
    This is in all likely hood a case of my self being too dense and missing something fundimental ;-)  I just can't figure out how to wire the shut down method after I've configured the call library node. See the attached pictures:
    Attachments:
    Start.jpg ‏7 KB
    shurtdown.png ‏9 KB

  • How can I filter to find photos NOT pinned to a map? I have 28,000 phots with many mapped and many not. The Search function does not include GPS data. I haven't found  way to search metadata inside or out of Elements.

    How can I filter to find photos NOT pinned to a map? I have 28,000 phots with many mapped and many not. The Search function does not include GPS data. I haven't found  way to search metadata inside or out of Elements.

    How can I filter to find photos NOT pinned to a map? I have 28,000 phots with many mapped and many not. The Search function does not include GPS data. I haven't found  way to search metadata inside or out of Elements.

  • HT1841 How to disable some of the automatic function from my bluetooth (jabra) while iphone does not have the capacity to set up the bluetooth property like BB?

    How to disable some of the automatic function from my bluetooth (jabra) while iphone does not have the capacity to set up the bluetooth property like BB?

    Sorry. You're not making sense. Please re-phrase the question or post in your native language.

  • My Email does not have any functions on the bottom bar?

    My Email does not have any functions on the bottom bar?
    I open an email and there no functions to delete forward or reply with.  Anyone have an idea?

    Hi
    Just to clarify what your saying under menu > settings > Connectivity the only option you can see is Bluetooth? There are no other options to select?
    Because under the connectivity menu you should be able to Network, WiFi, Bluetooth, USB, Settings, Connection manager, Mobile data tracker, Data Transfer, Video sharing, Admin settings and play via radio.
    All the options should be visible on the connectivity menu on a N8 with Nokia Belle installed.
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • HT4623 My iPhone 3G does not have update function in it What do I Do?

    My iPhone 3G does not have an update function in it. I want to update my software, What do I do?

    An iPhone 3G can only be updated to iOS 4.2.1...that's the end of the line for that model, and an iPhone 3G can only be updated to iOS 4.2.1 using iTunes. Software update, directly on the phone, is not available for the iPhone 3G.

  • ADE 2.0 does not have functions of divided page and single page- like ADE 1.7?

    I have a question for specification between ADE 1.7 and ADE 2.0.
    ADE 2.0 does not have icon buttons for "divided two-page" and "single page" like ADE 1.7? Since ADE 1.8 Preview version was temporarily available to download, there has been disappeared such functions....

    There are lots of bugs in ADE2.0 (and 2.0.1).  Try replacing ADE2.0 with the older but more reliable v1.7.2.
    (You can have them both installed at once if you like.)
    Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
    http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
    The forum software is sometimes corrupting the link above.  There shouldn't be a blank in 'editio ns.html'.  The following redirects to the same page: http://tinyurl.com/diged172
    Some people have found ADE trying to upgrade automatically. 
    It appears (not 100% sure) that if you install ADE2.0 as a new install (not as an upgrade) that your 1.7.2 will continue to run.
    Probably best to say no if 2.0.x installation asks if you want to migrate your library.

  • HT201263 my iphone5 does not have passcode setting option. this is for auto-lock function

    my iphone5 does not have passcode setting option. this is for auto-lock function

    Hello SLLH
    You can find the settings for the Passcode Lock in Settings > General > Passcode Lock. If you are looking for Auto-Lock, then go to Settings > General > Auto-Lock. If you are not seeing these options then you may need to do a reset settings on your iPhone, which is located at General > Settings >Reset > Reset All Settings.
    iPhone User Guide
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work.

    Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work neither when chosen after pressing the button nor chosen in the apple menu..

    I have had the same problem but on another forum it was suggested that disabling internet sharing would solve this. This fix seems to work on my machine - why it works I do not understand

  • The security database on the server does not have a computer account for this workstation trust relationship

    When I try to log on to my DC it says "The security database on the server does not have a computer account for this workstation trust relationship". It won't let me log on. I installed another server server 2012r2  (its virtual )
    and I can get to ADSI edit. 
    I think what happened was I had a pc that could not connect without unplugging the network cable. So I found this fix 
    FIX: “The security database on the server does not have a computer account for this workstation trust relationship”2032011
    I’ve seen a lot of solutions, or suggestions rather, with regard to the error in the title of this post.  In my experience, the problem can almost always be resolved without extra domain add/removes and reboots, which is the most prevalent solution I have
    seen around.  Usually, this issue is due to a mismatch between attributes of the computer account in Active Directory and those values on the system itself.  Here are the steps I take to fix this issue when it crops up:
    Open up Active Directory Users & Computers pointed to the domain the computer account resides in
    From the “View” pull-down menu, make sure that “Advanced Features” is checked
    Navigate to the part of your organizational unit (OU) structure where the computer account for this server resides
    Open the Properties for the computer object
    Choose the “Attribute Editor” tab on the Properties dialog box
    Check the Attributes dNSHostName & servicePrincipalName – anywhere that a fully qualified hostname is specified (e.g. myserver.mydomainname.com), make sure that the entry matches the hostname
    you have configured when you go here on your server: Start -> Computer -> Right-Click, Properties -> Change Settings (under “Computer name, domain… settings”) -> Full Computer Name
    As an example, for a fictitious W2K8 R2 server whose Full Computer Name is “srv1.mydomainname.com”, these attribute/value pairs should be in Active Directory:
    dNSHostName:
    srv1.mydomainname.com
    servicePrincipalName:
    HOST/SRV1
    HOST/srv1.mydomainname.com
    RestrictedKrbHost/SRV1
    RestrictedKrbHost/srv1.mydomainname.com
    TERMSRV/SRV1
    TERMSRV/srv1.mydomainname.com"
    Not reading it carefully I add a computer with the same name as the pc having the issue and followed the above. The problem is that I did not notice that the spn did not want the name of my server (serv1) but the name of the trouble
    pc.
    dcdiag output
    PS C:\Users\administrator.TOM> dcdiag.exe
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       ***Error: DC3 is not a Directory Server.  Must specify /s:<Directory Server> or  /n:<Naming Context> or nothing to
       use the local machine.
       ERROR: Could not find home server.
    PS C:\Users\administrator.TOM> dcdiag.exe /s:DC2
    Directory Server Diagnosis
    Performing initial setup:
       * Identified AD Forest.
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site\DC2
          Starting test: Connectivity
             The host 9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM could not be resolved to an IP address. Check the DN
             server, DHCP, server name, etc.
             Neither the the server name (DC2.TOM) nor the Guid DNS name (9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM)
             could be resolved by DNS.  Check that the server is up and is registered correctly with the DNS server.
             Got error while checking LDAP and RPC connectivity. Please check your firewall settings.
             ......................... DC2 failed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site\DC2
          Skipping all tests, because server DC2 is not responding to directory service requests.
       Running partition tests on : ForestDnsZones
          Starting test: CheckSDRefDom
             ......................... ForestDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... ForestDnsZones passed test CrossRefValidation
       Running partition tests on : DomainDnsZones
          Starting test: CheckSDRefDom
             ......................... DomainDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... DomainDnsZones passed test CrossRefValidation
       Running partition tests on : Schema
          Starting test: CheckSDRefDom
             ......................... Schema passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Schema passed test CrossRefValidation
       Running partition tests on : Configuration
          Starting test: CheckSDRefDom
             ......................... Configuration passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Configuration passed test CrossRefValidation
       Running partition tests on : TOM
          Starting test: CheckSDRefDom
             ......................... TOM passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... TOM passed test CrossRefValidation
       Running enterprise tests on : TOM
          Starting test: LocatorCheck
             ......................... TOM passed test LocatorCheck
          Starting test: Intersite
             ......................... TOM passed test Intersite
    PS C:\Users\administrator.TOM> regsvr32 schmmgmt.dll
    PS C:\Users\administrator.TOM> netdig /fix
    netdig : The term 'netdig' is not recognized as the name of a cmdlet, function, script file, or operable program.
    Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
    At line:1 char:1
    + netdig /fix
    + ~~~~~~
        + CategoryInfo          : ObjectNotFound: (netdig:String) [], CommandNotFoundException
        + FullyQualifiedErrorId : CommandNotFoundException
    PS C:\Users\administrator.TOM> Setup /PrepareSchema
    Setup : The term 'Setup' is not recognized as the name of a cmdlet, function, script file, or operable program. Check
    the spelling of the name, or if a path was included, verify that the path is correct and try again.
    At line:1 char:1
    + Setup /PrepareSchema
    + ~~~~~
        + CategoryInfo          : ObjectNotFound: (Setup:String) [], CommandNotFoundException
        + FullyQualifiedErrorId : CommandNotFoundException
    PS C:\Users\administrator.TOM> netdiag /test
    netdiag : The term 'netdiag' is not recognized as the name of a cmdlet, function, script file, or operable program.
    Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
    At line:1 char:1
    + netdiag /test
    + ~~~~~~~
        + CategoryInfo          : ObjectNotFound: (netdiag:String) [], CommandNotFoundException
        + FullyQualifiedErrorId : CommandNotFoundException
    PS C:\Users\administrator.TOM> nslooup
    nslooup : The term 'nslooup' is not recognized as the name of a cmdlet, function, script file, or operable program.
    Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
    At line:1 char:1
    + nslooup
    + ~~~~~~~
        + CategoryInfo          : ObjectNotFound: (nslooup:String) [], CommandNotFoundException
        + FullyQualifiedErrorId : CommandNotFoundException
    PS C:\Users\administrator.TOM>

    Ok fixed. 
    At a elevated cmd prompt run ;
    C:\Users\administrator.TOM>setspn -x
    As you can see the DC serv1 had duplicate SPNs.
    Checking domain DC=TOM
    Processing entry 1
    HOST/serv1.TOM is registered on these accounts:
            CN=SERV1,OU=Domain Controllers,DC=TOM
            CN=C00049,CN=Computers,DC=TOM
    {14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/TOWN-HBWJ29ZOQC is registered on these ac
    counts:
            CN=Administrator,CN=Users,DC=TOM
            CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
    {14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/town-hbwj29zoqc.TOM is registered on thes
    e accounts:
            CN=Administrator,CN=Users,DC=TOM
            CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
    RestrictedKrbHost/serv1 is registered on these accounts:
            CN=C00049,CN=Computers,DC=TOM
            CN=SERV1,OU=Domain Controllers,DC=TOM
    RestrictedKrbHost/serv1.TOM is registered on these accounts:
            CN=C00049,CN=Computers,DC=TOM
            CN=SERV1,OU=Domain Controllers,DC=TOM
    found 5 groups of duplicate SPNs.
    Went to the computers OU and changed computer c00049 to the correct SPN. Now I have a new issues, I'll start a new thread.

  • SSL VPN message "This (client) machine does not have the web access privilege."

    Hello!
    I am trying to configure the SSL VPN (WebVPN) and I am almost done but when clicking on the URL's I configured in the bookmarks, I get the message "This (client) machine does not have the web access privilege. Please contact your SSLVPN provider for assistance." I looked through the many tutorials and guides in existence and none talks about such error and the fix for it. In fact, if I search the net for this error message I get only one match, in the Cisco website, where is say that "The client computer does not meet the security criteria of having web access functionality through the SSL VPN gateway." and as fix it gave this tip "Check the URL to the gateway or contact the administrator if it persists." So, nothing on the website about what this issue is and how to fix it. I will provide my IOS configuration and hopefully someone will spot the issue. Here it goes:
    version 12.4
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname R1
    boot-start-marker
    boot-end-marker
    logging message-counter syslog
    no logging buffered
    enable secret 5 $1$1LLX$u7aTc8XfNqPZhPVGwEF/J0
    enable password xxxxxxxx
    aaa new-model
    aaa authentication login userAuthen local
    aaa authentication login sdm_vpn_xauth_ml_1 local
    aaa authorization network groupauthor local
    aaa session-id common
    crypto pki trustpoint TP-self-signed-1279712955
    enrollment selfsigned
    subject-name cn=IOS-Self-Signed-Certificate-1279712955
    revocation-check none
    rsakeypair TP-self-signed-1279712955
    crypto pki certificate chain TP-self-signed-1279712955
    certificate self-signed 01
      3082023A 308201A3 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
      31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
      69666963 6174652D 31323739 37313239 3535301E 170D3130 30333233 31313030
      33375A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
      4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 32373937
      31323935 3530819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
      8100A8EF 34E3E792 36660498 9801F934 E8A41865 3599EA35 B073AC91 D7A53AF4
      A4390D2F CB3DB2DE 936B28F0 A25F3CE1 6F40FD9E E79096F2 F89620E0 B31A7B34
      649BBA22 AE44CB55 9F38BF0C 2F2770CF 8380C167 C17D760C 380E28E4 FF7D6874
      9EFC310A 2AA60835 F1AA384F CD1A0173 19C98192 EBFBD531 24CB9203 EA9E7D54
      B2C30203 010001A3 62306030 0F060355 1D130101 FF040530 030101FF 300D0603
      551D1104 06300482 02523130 1F060355 1D230418 30168014 0D9D62EC DA77EAF3
      11ABF64D 933633F9 2BA362DC 301D0603 551D0E04 1604140D 9D62ECDA 77EAF311
      ABF64D93 3633F92B A362DC30 0D06092A 864886F7 0D010104 05000381 81006853
      48ED4E3E 5721C653 D9A2547C 36E4F0CB A6764B29 9AFFD30A 1B382C8C C6FDAA55
      265BCF6C 51023F5D 4AF6E177 C76C4560 57DE5259 40DE4254 E79B3E13 ABD0A78D
      7E0B623A 0F2D9C01 E72EF37D 5BAB72FF 65A176A1 E3709758 0229A66B 510F9AA2
      495CBB4B 2CD721A7 D6F6EB43 65538BE6 B45550D7 A80A4504 E529D092 73CD
       quit
    dot11 syslog
    ip source-route
    ip dhcp excluded-address 192.168.0.1 192.168.0.10
    ip dhcp pool myPOOL
       network 192.168.0.0 255.255.255.0
       default-router 192.168.0.1
       dns-server 87.216.1.65 87.216.1.66
    ip cef
    ip name-server 87.216.1.65
    ip name-server 87.216.1.66
    ip ddns update method mydyndnsupdate
    HTTP
      add http://username:[email protected]/nic/update?system=dyndns&hostname=<h>&myip=<a>
    interval maximum 1 0 0 0
    no ipv6 cef
    multilink bundle-name authenticated
    vpdn enable
    vpdn-group pppoe
    request-dialin
      protocol pppoe
    username cisco privilege 15 password 0 xxxxxxxx
    crypto isakmp policy 3
    encr 3des
    authentication pre-share
    group 2
    crypto isakmp fragmentation
    crypto isakmp client configuration group vpnclient
    key cisco123
    domain selfip.net
    pool ippool
    acl 110
    crypto ipsec transform-set myset esp-3des esp-md5-hmac
    crypto dynamic-map dynmap 10
    set transform-set myset
    reverse-route
    crypto map clientmap client authentication list userAuthen
    crypto map clientmap isakmp authorization list groupauthor
    crypto map clientmap client configuration address respond
    crypto map clientmap 10 ipsec-isakmp dynamic dynmap
    archive
    log config
      hidekeys
    interface Loopback0
    ip address 10.11.0.1 255.255.255.0
    ip nat inside
    ip virtual-reassembly
    interface Loopback2
    description SSL VPN Website IP address
    ip address 10.10.10.1 255.255.255.0
    interface Loopback1
    description SSL DHCP Pool Gateway Address
    ip address 192.168.250.1 255.255.255.0
    interface FastEthernet0
    description $ES_LAN$
    ip address 192.168.0.1 255.255.255.0
    ip nat inside
    ip virtual-reassembly
    duplex auto
    speed auto
    interface BRI0
    no ip address
    encapsulation hdlc
    shutdown
    interface FastEthernet1
    interface FastEthernet2
    switchport access vlan 2
    interface FastEthernet3
    interface FastEthernet4
    interface FastEthernet5
    interface FastEthernet6
    interface FastEthernet7
    interface FastEthernet8
    interface ATM0
    no ip address
    no atm ilmi-keepalive
    pvc 8/35
      encapsulation aal5mux ppp dialer
      dialer pool-member 1
    bundle-enable
    dsl operating-mode auto
    interface Vlan1
    no ip address
    interface Dialer1
    ip ddns update hostname myserver.selfip.net
    ip ddns update mydyndnsupdate host members.dyndns.org
    ip address negotiated
    ip nat outside
    ip virtual-reassembly
    encapsulation ppp
    ip policy route-map VPN-Client
    dialer pool 1
    ppp chap hostname xxx
    ppp chap password 0 xxxx
    ppp pap sent-username xxx password 0 xxxx
    crypto map clientmap
    ip local pool ippool 192.168.50.100 192.168.50.200
    ip local pool sslvpnpool 192.168.250.2 192.168.250.100
    ip forward-protocol nd
    ip route 0.0.0.0 0.0.0.0 Dialer1
    ip http server
    ip http authentication local
    ip http secure-server
    ip nat inside source static tcp 192.168.0.2 21 interface Dialer1 790
    ip nat inside source static tcp 192.168.0.15 21 interface Dialer1 789
    ip nat inside source list 102 interface Dialer1 overload
    ip nat inside source static tcp 10.10.10.1 443 interface Dialer1 443
    ip nat inside source static tcp 10.10.10.1 80 interface Dialer1 80
    access-list 102 deny   ip 192.168.0.0 0.0.0.255 192.168.50.0 0.0.0.255
    access-list 102 permit ip 192.168.0.0 0.0.0.255 any
    access-list 110 permit ip 192.168.0.0 0.0.0.255 192.168.50.0 0.0.0.255
    access-list 144 permit ip 192.168.50.0 0.0.0.255 any
    route-map VPN-Client permit 10
    match ip address 144
    set ip next-hop 10.11.0.2
    control-plane
    banner motd ^C
    ================================================================
                    UNAUTHORISED ACCESS IS PROHIBITED!!!
    =================================================================
    ^C
    line con 0
    line aux 0
    line vty 0 4
    password mypassword
    transport input telnet ssh
    webvpn gateway MyGateway
    ip address 10.10.10.1 port 443 
    http-redirect port 80
    ssl trustpoint TP-self-signed-1279712955
    inservice
    webvpn install svc flash:/webvpn/svc_1.pkg sequence 1
    webvpn install csd flash:/webvpn/sdesktop.pkg
    webvpn context SecureMeContext
    title "My SSL VPN Service"
    secondary-color #C0C0C0
    title-color #808080
    ssl authenticate verify all
    url-list "MyServers"
       heading "My Intranet"
       url-text "Cisco" url-value "http://192.168.0.2"
       url-text "NetGear" url-value "http://192.168.0.3"
    login-message "Welcome to My VPN"
    policy group MyDefaultPolicy
       url-list "MyServers"
       functions svc-enabled
       svc address-pool "sslvpnpool"
       svc keep-client-installed
    default-group-policy MyDefaultPolicy
    aaa authentication list userAuthen
    gateway MyGateway domain testvpn
    max-users 100
    csd enable
    inservice
    end
    Thank you!

    Hi,
    Please check SAP note:
    2004579 - You cannot create a FR company from a Package
    Thanks & Regards,
    Nagarajan

  • I have a late 2008 white macbook.  I have a mini dvi to hdmi adapter, and a hdmi cord.  My cannot get my MB to detect an external monitor.  Nothing happens when plugged in.  Also, my display settings does not have an option for mirroring or arrangment tab

    I have a late 2008 white macbook.  I have a mini dvi to hdmi adapter, and a hdmi cord.  My cannot get my MB to detect an external monitor.  Nothing happens when plugged in.  Also, my display settings does not have an option for mirroring or arrangment tab

    Yeah, I'm having the same exact problem - It seems that the thunderbolt minidisplay port is only able to output the analog VGA signal, not the digital signal to support DVI and HDMI. This is a bug that came up after installing 10.7.1. I bought my macbook air with 10.7 on it, upgraded it to 10.7.1 as soon as I got it, so I have never been able to use hdmi or dvi with my macbook air. This is an extremely frustrating problem for me, I used HDMI on a daily basis with my PC. I have spent many hours at the genius bar running diagnostic tests so Apple can get as much information as possible to create a fix for this problem. I have been emailing tech support for 3 or so weeks now, they keep saying that they are working on a fix and it should be out soon, but 10.7.2 has come and gone and I still have no HDMI functionality with my MacBook Air!

  • How to find a customer who does not have any activity in the last 5 years

    HI all,
       How to find a customer who does not have any activity in the last 5 years.
    Thanks & Regards,
    Moderator message: not directly related to ABAP development, please have a look in the respective functional forum.
    Edited by: Thomas Zloch on Jan 3, 2011 2:20 PM

    Post Author: tzinser
    CA Forum: Formula
    Okay, I left off a lot of important information...
    I'm using two tables
    TWDATA
    EVENT
    From TWDATA I'm pulling the fields TWDATA.OrderNumber and TWDATA.DisbursementDate
    From EVENT I'm pulling the fields EVENT.EventCode and EVENT.CompletedDate
    The two tables are linked by OrderNumber.

  • Apple told me that my iPhone 4 does not have the possibility to store sent e-mails. I can not believe that, but my iPhone has a box for sent mails that is always empty. How can my iPhone store sent e-mails?

    The Apple helpdesk told me that my iPhone 4 does not have the function to keep sent mails stored. I cannot believe that. My iPhone 4 has a Sent box, I have checked the Sent box in Configuratieo--> E-mail, ...Calender..,but the Sent box is always empty after I have sent an E-mail. I know that the E-mails arrive at their destinations. How can I activate the Sent box?

    lol the person you talked to at Apple was not very bright.
    Of course you can have sent items in your mail on the iPhone 4. I have mine there all the time.
    Sounds like you might have issues with the software.
    I recommend trying a reset, send email and see if that goes to the sent items directory
    If not do a restore.
    #1: Reset: http://support.apple.com/kb/HT1430
    #2: Restore: http://support.apple.com/kb/HT1414

  • Palm Desk Top 6.2 Address Look Up Function Does Not Work In Windows 7

    I recently upgraded my desk top computer's operating system from Windows Vista Home Premium to Windows 7 Home Premium.  I synchronize with a Palm Tx PDA.  HP PalmOS customer support Chat helped me work through a compatibility issue that was preventing display of Address, Calendar, Memo and To Do items on my desk top computer via the Palm Desk Top 6.2 application.  I now find that the address look up function does not work (although it worked fine when I was running Vista).  Without success, I tried running the repair tool as well as reloading the software (both overlay and clean reinstall).  I would appreciate any help or suggestions to fix?
    Post relates to: Palm TX

    Hi,
    844869 wrote:
    CREATE TABLE TEST_EMPLOYEES
    FIRST_NAME VARCHAR2(26 CHAR),
    GRADE VARCHAR2(5 CHAR)
    INSERT INTO TEST_EMPLOYEES (FIRST_NAME, GRADE) VALUES ( 'William', 45 ); ...Thanks for posting the CREATE TABLE and INSERT statements; that's very helpful.
    William&45     1
    Robin 43     1
    Raymond          43     1
    Richard          43     1
    Karen          28     1
    Michelle               1
    Jonathan               1
    Mark               1
    Ann               1You may have noticed that this site normally doesn't display multiple spaces in a row.
    Whenever you post formatted text (such as query results) on this site, type these 6 characters:
    \(small letters only, inside curly brackets) before and after each section of formatted text, to preserve spacing.
    This is one of the many helpful things found in the forum FAQ {message:id=9360002}
    Are the results above what you're getting with some existing query, or are they the results you want? 
    If those are your current results, post your query.  In that case, what are the results you want?  Do you want this?FIRST_NAME GRADE RNK
    William 45 1
    Robin 43 2
    Raymond 43 2
    Richard 43 2
    Karen 28 5
    Michelle 6
    Jonathan 6
    Mark 6
    Ann 6
    Edited by: Frank Kulash on Feb 21, 2013 2:39 PM
    I see you've added the desired results to your original message.
    Here's one way to do that:SELECT first_name
    ,     grade
    ,     RANK () OVER (ORDER BY grade NULLS FIRST)     AS rnk
    FROM     test_employees
    ORDER BY grade          DESC     NULLS LAST

Maybe you are looking for