Function error when calling in background

Hi people! I need some help please.
I have an program that call an RFC function. This RFC function made select in BSAD, and because of the range, will return a lot of registers, so it cause timeout. We tried run it on backgroung, but after 1 hour app, an short dump occurs with the message CALL_FUNCTION_REMOTE_ERROR. I think the cause of this error is select taking too long time. Whats go wrong? In background mode even with a lot os data, should work, no?
Thanks!

Hi,
If you can check more detais about errors in the SM58 in the source system or ST22.
It is helpfull to execute the RFC with ST05.
And if you need to change any data for RFC Destination, check transaction SMQS.
Regrads,
Fernando

Similar Messages

How to capture errors when a Function module is called as BACKGROUND TASK

How to capture errors when a Function module is called as BACKGROUND TASK?.Please advise.
FUNCTION ZRPM_DELETE_PROJECT_DATA_API.
""Local interface:
*" IMPORTING
*"     VALUE(IV_EXTERNAL_ID) TYPE RPM_TV_EXTID OPTIONAL
*"     VALUE(IV_PROJECT_GUID) TYPE RPM_TV_GUID OPTIONAL
*"     VALUE(FLAG) TYPE BOOLEAN OPTIONAL
*" EXPORTING
*"     VALUE(EV_RC) TYPE I
*"     VALUE(EV_MSG) TYPE STRING
*"     VALUE(ET_MSG) TYPE RPM_TT_MESSAGES
IF flag = cl_rpm_co=>sc_true.
    Call function 'RPM_DELETE_PROJECT_DATA' IN BACKGROUND TASK
      EXPORTING
        IV_EXTERNAL_ID = IV_EXTERNAL_ID
        IV_PROJECT_GUID = IV_PROJECT_GUID
      IMPORTING
        EV_RC           = EV_RC
        EV_MSG          = EV_RC
        ET_MSG          = ET_MSG.
    COMMIT WORK.
ELSE.
    CALL FUNCTION 'RPM_DELETE_PROJECT_DATA'
      EXPORTING
        IV_EXTERNAL_ID = IV_EXTERNAL_ID
        IV_PROJECT_GUID = IV_PROJECT_GUID
      IMPORTING
        EV_RC           = EV_RC
        EV_MSG          = EV_MSG
        ET_MSG          = ET_MSG.
ENDIF.
ENDFUNCTION.
In above code how to capture 'EV_RC' when FM is called as background task.

Prakash,
CALL FUNCTION IN BACKGROUND TASK allows no IMPORTING parameters, so that your code will produce a syntax error.
The calling program can only handle errors of remote function calls (RFC) if these are either
- synchronous RFC (that is CALL FUNCTION ... DESTINATION ...) or
- asynchronous RFC (that is CALL FUNCTION STARTING NEW TASK ... DESTINATION ...).
Both synchronous and asynchronous RFC allow the capturing of errors by means of exceptions. But that is a different topic.

Error when call RFC Function module in R/3

Dear All,
We are trying to call RFC function module CBIF_GLM1_PROCESS_ORDER_READ (This is not a BAPI and also not released ) in R/3 from XI system.
we are facing the error "Error while lookup Exception during processing the payload. Error when calling an adapter by using the communication channel CC_PPPI_MES_RFC_Rcvr (Party: , Service: WCD_320, Object ID: 16563889b449328eac76caa6a3bc592e) XI AF API call failed. Module exception: 'error while processing the request to rfc-client: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.adapter.rfc.util.bapi.BapiException: Parameter with name RETURN not found.'. Cause Exception: 'com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.adapter.rfc.util.bapi.BapiException: Parameter with name RETURN not found.'."
This is the first time we are doing this configuration.
Could you please let me know what woulbe the reason.

read the original message
We are trying to call RFC function module CBIF_GLM1_PROCESS_ORDER_READ (This is not a BAPI and also not released ) in R/3 from XI system.
I am talking about the above Receiver RFC channel which you guys are using to call R/3 from XI. That where you need to change the commit parameter

Error when calling SOAP Runtime functions

Hi Guys,
I have a requirement in which i have to consume a webservice and get a response from it but when i consumed the web service and tried to test it i got the below error please let me know solution for this as it is very urgent and also i am very new to web services stuff
Error when calling SOAP Runtime functions: SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_CONNECTION_FAILED")
Thanks
shivraj

Hi,
Have a look at this blog from Michal Krawczyk to find a solution:
The specified item was not found.
Hope this helps,
Grzegorz

Error when calling SOAP Runtime functions - Please help!

Hi,
Very new to SAP. I just installed SAPNW7.0ABAPTrialSP12 (sandbox server, with default options) and setup the
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/db/7c623cf568896be10000000a11405a/content.htm">Flight Data</a>.
I wanted to invoke some of the Flight Data functions through SOAP. So I invoked the following URL:
http://localhost:8000/sap/bc/srt/rfc/sap/BAPI_FLIGHT_GETDETAIL?sap-client=000&wsdl=1.1
I get the following error:
The following error text was processed in the system NSP : Error when calling SOAP Runtime functions
The error occurred on the application server hs_NSP_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
      Method: HANDLE_REQUEST of program CL_SOAP_TRANSPORT_EXTENSN_ROOTCP
      Method: HANDLE_REQUEST of program CL_SOAP_HTTP_EXTENSION========CP
      Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_SOAP_HTTP_EXTENSION========CP
      Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
      Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
      Module: %_HTTP_START of program SAPMHTTP
FROM Runtime Error Log:
Runtime Errors                     UNCAUGHT_EXCEPTION
Exception                          CX_SOAP_CORE
     Termination occurred in the ABAP program "CL_SOAP_TRANSPORT_EXTENSN_ROOTCP" -
           in "HANDLE_REQUEST".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 37
          of the (Include) program "CL_SOAP_TRANSPORT_EXTENSN_ROOTCM004".
Does anyone have any ideas on what is going on? Thanks in advance.

Hi,
Have a look at this blog from Michal Krawczyk to find a solution:
The specified item was not found.
Hope this helps,
Grzegorz

Error when calling up the application function for hierarchies

Hello,
if I try to load a material class hierarchy and the loading is failing directly in source system with error message "Error when calling up the application function for hierarchies". Did anybody have this problem? I could not find anything iside the forums.
Thanks for your help!
Regards,
Christian

Hi,
I have the same problem. Do someone know the solution? What is the problem?
Thanks,
Ángel.

ERROR: Error when calling IDOCTYPE_READ_COMPLETE:OBJECT_UNKNOWN

Hi,
We are having a problem in processing (receiving) an idoc through our RFC client in SAP .
The RFC Client is up and running however, turns red while processing a certain Idoc.
The error occured:
Error when calling IDOCTYPE_READ_COMPLETE:OBJECT_UNKNOWN (IDoc /).
This issue has been occurring since August 18-23. if the status of the RFC client is green, its shows: Waiting for IDOC.
My questions would be:
1) If for example, there are 50,000 idocs that are being sent and the first 1000 contains an error, will it still process the 49,000 idocs left through RFC client?
2) what are the possible errors of an idoc which causes the RFC client to be down (having the error above)? is it the format of the idoc? or the idoc_type itself?
3) another instance would be, if they are resending the idocs again, the RFC will be up eventually and we'll be able to receive the idocs. what are the causes for this?
4) are there any ways to track these idocs (which contains the error) in BODI or in SAP?
5) what are the alternative ways of processing the idocs that contains an error?

I think there is a misspelling in your IDOC type (in header of IDOC probably)
or the IDOC type does not exist on your SAP system
you call function IDOCTYPE_READ_COMPLETE remotely on SAP server and this falls into error with exception 1 (OBJECT_UNKNOWN)

Communication error when calling web service for checkin and checkout files

Hello,
I am trying to checkout and also to checkin files within the DMS via web service. The files are stored in the VAULT (=TRESOR) without the data server parth and DVA computer.
For checkout:
Original zum Ändern auschecken
CALL FUNCTION 'BAPI_DOCUMENT_CHECKOUTMODIFY2'
    EXPORTING
      documenttype    = pi_documenttype
      documentnumber = pi_documentnumber
      documentpart    = pi_documentpart
      documentversion = pi_documentversion
      documentfile    = lf_documentfiles
      pf_http_dest    = ''
      pf_ftp_dest     = ''
    statusextern    = lf_status
    IMPORTING
      return          = lf_return
      checkedoutfile = ls_checkedoutfile.
and for checkin:
Dokument einchecken
CALL FUNCTION 'BAPI_DOCUMENT_CHECKIN2'
    EXPORTING
      documenttype    = pi_documenttype
      documentnumber = pi_documentnumber
      documentpart    = pi_documentpart
      documentversion = pi_documentversion
      hostname        = ''
      statusintern    = ''
   statusextern    = lf_status
      statuslog       = ''
    IMPORTING
      return          = lf_return
    TABLES
      documentfiles   = lt_files.
But it is not working cause I always get a 'communication error' from the function CV120_FTP_START_REG_SERVER when calling one of these BAPIs via web service:
IF pf_check_gui = 'X'.
    CLEAR: gf_gui_exist,
           gf_gui_checked.
    CALL FUNCTION 'RFC_PING'
         DESTINATION 'SAPGUI'
         EXCEPTIONS: communication_failure = 1 MESSAGE lf_msg_text
                     system_failure        = 2 MESSAGE lf_msg_text.
    IF sy-subrc = 0.
      gf_gui_exist = 'X'.
    ELSE.
      CLEAR gf_gui_exist.
    ENDIF.
    gf_gui_checked = 'X'.
ENDIF.
Afterwards the following function is called where I got the error 'Program no longer started via RFC. No return possible.':
-> Vault with DVA -> ** Start FTP on the client
CALL FUNCTION 'SYSTEM_START_REG_SERVER'
       EXPORTING: progname    = 'sapftp'
                  startmode   = ''                          " X
                  exclusiv    = 'Y'
                  waittime    = 500
                  startcomp   = 'C'    " G=gui, C=RFC
                  startpara   = ' '
      IMPORTING: err_code    = lf_errno
                 err_mess    = lf_error_msg
                 destination = pfx_destination.
Regards
Jens

Hi! As mentioned below I had the same problem.
There are two notes concerning security setting of the SAP Gateway:
1069911 - GW: Changes to the ACL list of the gateway (reginfo)
1480644 - gw/acl_mode versus gw/reg_no_conn_info
Your basis team should check if the Gateway settings allow external programs to register on the gateway.
Best regards
Dominik

Javascript Error when calling EPCM.raiseEvent

Hi all!
   I'm having a Javascript error when calling EPCM.raiseEvent function. The error is :
   'The object does not accept the method or property'
Maybe the traslation is not perfect (I'm using spanish for my browser). Here is my call:
   EPCM.raiseEvent('myPar','myEvent','myParam');
What can be wrong?
Thanks in advance, and sorry for my terrible english.

Hi!
   This error is very strange... I accidentally changed the event name at consumer, but not at producer.... and the error didn't appear... Obviuslly it did'nt work, but it's so strange that if the event is not cought, there is no error (but nothing happens)
   I also noticed that doesn't matter which event I raise (I have two of them), the error is thrown at the same line, and they have totally different caller and receiver functions....
Thanks In advance.
Message was edited by:
        Eneko Rodriguez

Error when calling CLIPBOARD_IMPORT

hi all,
i have the following BDC call and process the return message. It is wokrng fine at foreground.
When execute In background, the write statement return only "Error when calling CLIPBOARD_IMPORT".
please advise what could be the mistake i have made? thanks.
CALL TRANSACTION tcode USING bdcdata
                   MODE   ctumode
                   UPDATE cupdate
                   MESSAGES INTO messtab.
l_subrc = sy-subrc.
CLEAR i_message.
REFRESH i_message.
LOOP AT messtab.
    SELECT SINGLE * FROM t100 WHERE sprsl = messtab-msgspra
                              AND   arbgb = messtab-msgid
                              AND   msgnr = messtab-msgnr.
    IF sy-subrc = 0.
      l_mstring = t100-text.
      IF l_mstring CS '&1'.
        REPLACE '&1' WITH messtab-msgv1 INTO l_mstring.
        REPLACE '&2' WITH messtab-msgv2 INTO l_mstring.
        REPLACE '&3' WITH messtab-msgv3 INTO l_mstring.
        REPLACE '&4' WITH messtab-msgv4 INTO l_mstring.
      ELSE.
        REPLACE '&' WITH messtab-msgv1 INTO l_mstring.
        REPLACE '&' WITH messtab-msgv2 INTO l_mstring.
        REPLACE '&' WITH messtab-msgv3 INTO l_mstring.
        REPLACE '&' WITH messtab-msgv4 INTO l_mstring.
      ENDIF.
      CONDENSE l_mstring.
      w_message-msgtyp = messtab-msgtyp.
      w_message-mstring = l_mstring(250).
*     APPEND w_message TO i_message.
      WRITE: /02 w_message-mstring.
      CLEAR w_message.
    ELSE.
      w_message-mstring = messtab.
*      APPEND w_message TO i_message.
      WRITE: /02 w_message-mstring.
      CLEAR w_message.
    ENDIF.
ENDLOOP.

friend .......
check this link........may be useful to u
Upload Excel table to internal table in background

Error when calling a Webservice's public method in Forms10g

Hi,
I'm getting the following error when calling a webservice's public method, i'm using Forms10g 10.1.2.3
java.rmi.RemoteException; nested exception is: HTTP transport error javax.xml.soap.SOAPException
java.security.PrivilegedActionException javax.xml.soap.SOAPException
Message send failed javax.net.ssl.SSLException SSL handshake failed X509CertChI have added the Jar containing the client proxy in both Classpaths(system variable and default.env), the jar has been made with jdk 1.4
I also have tested the client proxy from jDeveloper and it's working there, but in Forms i'm getting this error.
I guess my problem might be that i'm calling a webservice that is secured since the url starts with https
what should i do to fix this ??
Regards
Carlos

I understand, so i have a doubt, why the webservice works on jDeveloper ??Not just JDeveloper even soapUI and Neatbeans have a way of working without a client certificate installed.
I do not know how they achieve it. I know that they work without a client DC.
Cheers,
PS: See this http://stackoverflow.com/questions/8887434/webservices-ssl-https, it offers a clue.
The java programs run unhindered when one-way authentication is being used. These products ship with a digital certificate that is in the path of most popular CAs.
Corollary, if the Web Server is configured for mutual authentication then you need to install and configure the client certificate in the tools.
Edited by: Prabodh on Dec 5, 2012 8:36 PM

ORA-28868 error when calling Web service over HTTPS from PL/SQL utl_http

I am getting error message ORA-28868 error when calling Web service over HTTPS from PL/SQL utl_http PL/SQL package,
when browsed through some of the messages they point to setting Oracle Wallet Manager.
I am trying to connect
Any idea on how to resolve this issue ?
your input is appreciated.
Thanks
Ravi

Duplicate post ... please ignore.

ORA-03115 error when calling a Stored Procedure

Hi All,
I'm in the process of porting a Pro/C app from NT to Linux. I've installed 8.1.5 on our Linux box and patched it up to 8.1.5.02.
It all kind of works ok, except that I'm sometimes getting ORA-03115 errors when the app calls a stored procedure. The call in question looks like this:
EXEC SQL BEGIN DECLARE SECTION;
VARCHAR resprows[50][3998];
int numret = 0;
int numrows= 50;
int done= 0;
unsigned long resp_id = 0;
EXEC SQL END DECLARE SECTION;
EXEC SQL AT DB_NAME EXECUTE
BEGIN pkg_something.getdata(
:resp_id, /* IN */
:numrows, /* IN */
:done, /* OUT */
:resprows, /* OUT */
:numret /* OUT */
END;
END-EXEC;
The stored procedure basically uses the resp_id value to select rows from a table;
in each row there is a VARCHAR2(4000) column which it copies into the hostarray resprows.
There may be anything from 1 to numrows returned from the SP.
Initially, the resprows rows were defined to be size [4000]. Unfortunately, this caused ORA-02005 errors - I then changed the size to [3998], which seemed to fix the 02005's (although I'm unclear as to the reasons why).
Now I'm getting the 03115 errors when calling the SP. The oracle manual is not very helpful on what this error means.
This all works chipper on NT.
Any ideas?
Thanks in advance,
Nigel.
PS: The database the app is talking to is still hosted on NT.
null

Histon FTM wrote:
ORA-04063: package body "LAZARUS.LAZARUS" has errors Above, obviously conflicts with the statement that follows:
>
The procedure and package have both compiled without errors and the statement on its own works fine in SQL*Plus.I suggest you take a look in the USER_ERRORS view to see, what the errors are.
And just checking:
You have schema called LAZARUS, which holds a package named LAZARUS, which holds a procedure called POPULATEGRIDPOSITIONS?
Edited by: Toon Koppelaars on Oct 1, 2009 5:55 PM

401 Unauthorized Error When calling a SharePoint REST web service from SharePoint 2013 Workflow

We have our Workflow Manger installed on the same server as our SharePoint 2013 WFE development environment. When creating a SharePoint 2013 Workflow all Calls to a SharePoint 2013 REST web service results in a 401 Unauthorized error.
As an example I created a simple workflow that should return a JSON result. The REST Url returns the results in the browser without error.
Set Variable:webServiceUrl to https://<hostnamedsitecollection>/_vti_bin/client.svc/web/lists/getbytitle('ISR%20Approvers')/Items?$select=Title&$filter=Title%20eq%20%27General%27
then Build{...} Dictionary (Output to Variable:requestHeaders)
then Call [%Variable:webServiceUrl%] HTTP web service with request (ResponseContent to Variable:responseContent |ResponseHeaders to responseHeaders | ResponseStatusCode to Variable:responseCode)
The RequestHeader is set to the requestHeaders variable though the web service call properties
then Log Variable:responseCode to the workflow history list
After manually running the workflow in SharePoint on a list item in the ISR Approvers list it Logs "Unauthorized" in the Workflow History Log. It does this with every SharePoint REST web service call that I have tried through the workflow.
It doesn't have anything to do with the Workflow Manger being installed on the same machine as the SharePoint WFE does it?
Thank You for any insight

Hi,
According to your post, my understanding is that you had 401 Unauthorized Error when calling a SharePoint REST web service from SharePoint 2013 Workflow.
Please make sure you use the ‘Call HTTP Web Service’ correctly.
You can enter the URL into the brower to check whether it is correctly.
You need to
create the Request header requestHeaders
using a Dictionary:
Accept : application/json;odata=verbose
Content-Type : application/json;odata=verbose
To associate the
requestHeaders variable, select the Call action
property, set the RequestHeaders property to
requestHeaders.
Please refer to the following articles:
Working with Web Services in SharePoint 2013 Workflows using SharePoint Designer 2013
Calling the SharePoint 2013 Rest API from a SharePoint Designer
Workflow
In addtion, you need to make sure you install the workflow manager correctly.
More information:
Install and configure workflow for SharePoint Server 2013
Known Issues in Workflow Manager 1.0
Troubleshooting Workflow Manager 1.0 Management and Execution
Best Regards,
Linda Li
Linda Li
TechNet Community Support

500 Internal Server Error - When calling LOV's

I receiving the following error when calling a LOV.
Both date LOV's and LOV's based on a foreign key fail.
500 Internal Server Error
OracleJSP: oracle.jsp.provider.JspCompileException:
Errors compiling:D:\Oracle\oc4j\j2ee\home\application-deployments\ois\web\persistence\_pages\_jheadstart\_lovFrame.java
error: Invalid class file format in C:\Program Files\Java\j2re1.4.0\lib\rt.jar(java/lang/Object.class). The major.minor version '48.0' is too recent for this tool to understand.
D:\Oracle\oc4j\j2ee\home\application-deployments\ois\web\persistence\_pages\_jheadstart\_lovFrame.java:0: Class java.lang.Object not found in class com.orionserver.http.OrionHttpJspPage.
package _jheadstart;
^
2 errors

Marcel,
JDeveloper will not run out of the box with JDK 1.4. There is a help topic 'Configuring Support for JDK 1.4.0.01 in JDeveloper' that gives you some information.
But you also need to verify the compatability of all the frameworks you use with JKD 1.4, including BC4J, MVC and UIX. E.g. the classes12.jar we normally use for a JHeadstart application only works with JKD 1.2/1.3.
Having found out which versions of the frameworks you need, the next step is to validate whether the JHeadstart runtime classes will work with these versions. We have no experience ourself in this respect.
If it is an option for you, you might consider to downgrade to JKD 1.3.
Jan Kettenis

Function error when calling in background

Similar Messages

Maybe you are looking for