Function group activation error

I created a function group and tried to activate it but it gives me this error.
REPORT/PROGRAM statement missing, or program type is INCLUDE
I haven't written any code in it. I just need it so I can use it in my "Generate Table Maintenance" screen.
What can I do? Thanks.

HI,
  When you try to activate the Function group ensure that you select all the objects that are part of the function group area activated (Top include and all), Select all these and activate it then it will be activated.
thank
mahesh

Similar Messages

  • Issue regardin the function group runtime error.

    Hi experts,
    actulay i given the acces key for function group SVIM at the time of saving it asking the package but i given the Zpackage by mistake. after that when i am trying to access transection SE03 and SE80 it is giving the shortdump, the error message is below one.
    The following syntax error occurred in program "SAPLSDC_MIME " in include
    "LSVIMDAT " in
    line 1:
    "Each ABAP program can contain only one "REPORT", "PROGRAM", or "FUNCTI"
    "ON-POOL". statement."
    Regards,
    Rajasekhar.D.

    Hi,
    In Include LSVIMDAT, check whether you have written any Report or Function-Pool two times? It should be only Include program. also save in package SVIM.
    Regards,
    Sujeet

  • Copying a function group gives error

    Dear All,
    I am copying a function a group JV05. I have copied evrything i.e all the includes, TOP etc. But when i activate the group it gives me error. What could be the problem? I have tried to activate the includes & TOP individually. Still it gives error for some variables. Please help me out.
    Thanks in advance!
    Regards,
    Prasad

    hi ,
    **Go to se80..**
    **1. Select function group**
    **2. Enter JV05 as name  "-----> click on spectacles button.**
    **3. Right click on JV05**
    **4. Select copy  "--------> give a Zfunction group name**
    **5. "Copy all the function modules in this function group with zfunctionmodules.**
    **6. Save & Activate.**
    Regards,

  • User has no authorization for Function group SYST

    Hi,
    We are starting to make customisation to B2B application. I have just created a new project for B2B_XXXX application and deployed it on the server. When I run this custom application, I am not able to login using the same user that is working fine for the standard B2B application.
    Following is the error I am getting
    ERROR 1 - RFC_ERROR_LOGON_FAILURE: User INTUSER05 has no RFC authorization for function group SYST
    ERROR 2-  The application was not able to switch to a stateful connection......
    Strange thing is that the same user works very well for standard B2B.
    Any clue? All I have done is created a CUSTCRMPRJ for B2B ERP (SHRWEB, SHRAPP). Please help.
    Best regards,
    -Tarun
    Edited by: Tarun Bakshi on Nov 10, 2011 7:37 PM

    Hi Shanto,
    The problem is still occuring. Even If I give s_rfc authorisation the order is not being created.
    I compared the source code for b2b and b2b_custom application, I have pasted below the component info
    sap.com      CORE-TOOLS      7.00 SP14 (1000.7.00.14.0.20071210170909)      SAP AG      SAP AG      20080125132852
    sap.com      SAP_JTECHF      7.00 SP14 (1000.7.00.14.0.20071210172424)      SAP AG      SAP AG      20080125132853
    sap.com      BASETABLES      7.00 SP14 (1000.7.00.14.0.20071210170411)      SAP AG      SAP AG      20080125132853
    sap.com      SAP-JEECOR      7.00 SP14 (1000.7.00.14.0.20071210172300)      SAP AG      SAP AG      20080125132852
    sap.com      JLOGVIEW      7.00 SP14 (1000.7.00.14.0.20071210160700)      SAP AG      SAP AG      20080125132853
    sap.com      SAP-JEE      7.00 SP14 (1000.7.00.14.0.20071210172039)      SAP AG      SAP AG      20080125132853
    sap.com      SAP_JTECHS      7.00 SP14 (1000.7.00.14.0.20071210172719)      SAP AG      SAP AG      20080125133813
    sap.com      BI_UDI      7.00 SP14 (1000.7.00.14.0.20071210170522)      SAP AG      SAP AG      20080125133909
    sap.com      BI_MMR      7.00 SP14 (1000.7.00.14.0.20071210170459)      SAP AG      SAP AG      20080125133230
    sap.com      UMEADMIN      7.00 SP14 (1000.7.00.14.0.20071210164800)      SAP AG      MAIN_APL70VAL_C      20080125140341
    sap.com      LM-TOOLS      7.00 SP14 (1000.7.00.14.1.20080124101556)      SAP AG      MAIN_APL70P14_C      20080125134809
    sap.com      SAP-SHRWEB      6.0 SP0 (1000.6.0.0.2.20080129095806)      SAP AG      MAIN_CRM70PAT_C      20110608153828
    sap.com      SAP-SHRAPP      6.0 SP0 (1000.6.0.0.2.20080128172843)      SAP AG      MAIN_CRM70PAT_C      20110608154506
    b2b_custom application has been created by using code from the following SCs that were added to the track
    SAPSHRWEB10_7-20003522.SCA
    SAPSHRAPP10_7-20003520.SCA
    SAPCRMWEB10_7-20003518.SCA
    SAPCRMAPP10_7-20003516.SCA
    SAPCRMDIC10_0-20003519.SCA
    STRUTS01_0-10003646.SCA
    SAPIPCMSA10_0-20003515.SCA
    SAPCRMJAV10_7-20003517.SCA
    SAPSHRJAV10_7-20003521.SCA
    TEALEAF00_0-20001451.SCA
    SAPBUILDT14_0-10003479.SCA
    Any help would be great...

  • Error - Copying Function Group STXW

    Friends,
    I am trying to copy Function Group STXW into Z_STXW with one function module CONVERT_ABAPSPOOLJOB_2_PDF.
    But I am not able to activate the main program SAPLZ_STXW. I get an error 'Field OTF is unknown'. But OTF is an internal table already defined in the function module CONVERT_ABAPSPOOLJOB_2_PDF (I have activated this FM). I also have activated all other includes.
    Please resolve. Thanks in advance.
    Warm Regards
    Sagar

    <u>Scenario 1(when you copied only 1 function module).</u>
    If you are able to successfully activate, then the problem may be with navigation index not being regenerated correctly. To do that, go to your function module display in SE37. Once inside the source code, in the menu, 'Utilities--> update navigation index' will do the trick.
    <u>Scenario 2(where you copied all the function modules)</u>
    Here the error is coming because the function module in question has its parameters declared as global. Probably when you copied yours are not. You can check that in attributes tab of the function module. To globalize your function module's parameters, you have to be in change mode. In the menu, 'Edit>Interface> Globalize parameter' will do the trick.

  • Activation of Function group

    Hi friends,
    I have created one function group.Now,  i am  trying  to activate it,But It is throwing error message "REPORT/PROGRAM statement missing, or program type is I (INCLUDE)."
    But when i use Activate anyway ,it activated.
    Can anyone explain why is it so?     
    Regards,
    Pooja.

    Hi,
    1. Go to SE37
    2. Goto -> Function Grooups -> display Group
    3. Give Function Group Name what ever you want
    4. Activate it
    OR
    Goto Se38 Give your function group name by adding SAPL and press F7 and activate it
    Example:
    My function group name is zcl_group
    in SE38 i give SAPLZCL_GROUP to Activate Group.
    Regds
    Sivaparvathi
    Please reward points if helpful..............

  • Maintain object or update function group error

    Hi experts,
    I had searched the forums but did not find a conclusive solution so i am posting the Question.
    I had created a ztable. Maintained table generator then i created a T-code for the table . But when i am executing the t-code its giving me an error message maintain object or update function group. I checked  my function group but its active actually i think the screen no which i am giving in table maintainenace generatoris not getting generated.
    I tried to figure it out but couldn't .
    Any help would be appreciated.
    Regards,
    Pawan.

    Hi Matt ,
    Thanks for your Reply
    To answer your 1st Question
    1. How have your created the transaction for the table?
    I have created my Transaction for the table through se93. In that i selected 4 option that is transaction with parameter.
    In that under transaction gave sm30.gave my viewname i.e table name and update i'e. X.
    To answer your 2d Q
    Tell use the error message you get in SM30 exactly
    It is not a runtime error it is an error like a pop up which comes up when i go to sm30 and click on maintain.
    The error is as i have mentioned earlier.

  • Copy of Function Group SETB giving error

    Dear All,
    I tried to copy the standard function Group SETB to ZSETB(Which is having SE16 transaction attached) but during activation the include is giving error as "The Field TABNAME is unknown". I have just copied the entire functional group along with function modules. No clue how I can avoid the error. I deleted the include LSETBF10 and re-copied, but error is persisting. Do you have any clue???
    Thanks and regards,
    AD

    Hi!
    Thanks for all your valuable reply. I could avoid the error but could not avoid another error: "The parameter INTTAB of the Global interface has already been defined outside the function". While double clicking on the error, I have reached to a hidden include (Not possible to browse through Navigtion) LZSETB$07. The include contains the following code:
      THIS FILE IS GENERATED BY THE FUNCTION LIBRARY.               *
      NEVER CHANGE IT MANUALLY, PLEASE!                             *
    FUNCTION $$UNIT$$ ZRS_TABLE_VIEW
             IMPORTING
                   VALUE(TABNAME) LIKE !DATABROWSE-TABLENAME
               DEFAULT 'TFDIR'
             TABLES
                   !FIELDTAB STRUCTURE !X031L OPTIONAL
                   !INTTAB
             EXCEPTIONS
                   !CANCELD
                   !GENERATION_ERROR
             $$GLOBAL.
    I assume that is a system generated include. The Global option in FM has automatically been copied during copy of the function group and the function module.
    Thanks and regards,
    AD

  • Error while transporting a Function Group!

    HI ABAPers!
         We have created many function modules in a single function group. While we are trying to transport the function group we succeeded in releasing the function group from the development server to the quality system. But while we are trying to import the same function group from the quality system, it is throwing an error 'FUNCTION GROUP NOT FIT IN SIZE'. what might be the reason for this behaviour and what would be the remedy? Please help this out and points would be awareded for the solutions.
    Regards,
    Kiran

    Hi,
    just an hint (i don't know if it will help u).
    Try in se37 trx , menu "Utilities", shoul be "Repair function group" (o something like that).
    Sometimes u have to do also with standard FM.
    In second step, use unconditional mode -126 in your transport (call to your system admin ho to do that).
    Hope it helps
    Bye
    Andrea
    Pls reward if it helps

  • Error in creating function group

    Hi
    In my z function group, do i need to declare all the parameters used in function modules explicitly in any top include?.it was not declared as such in the standard function group from which i copied .

    Hello ,
    Sometimes when u copy any standard function group into ZFuntion group u will get some systax errors saynig some varaible is not defined .
    then
    goto SE37
    Enter the fucntion module  and get into function bulinder
    select EDIT Menu option and Interface Submenu option inthat u will find GLOBALIZE PARAMETERS and LOCALIZE PARAMETERS  Just do that operation u will be free of errors.
    regards

  • EDI validation Error: Segment GS(Functional Group Header) at guideline

    Hi,
    I am working on EDI 272 transaction(inbound).
    I created ECS file for EDI 272 and validated the EDI 272 data with ECS file in the B2B document editor. Validation was sucess in the B2B document editor
    when I upload the same ECS file and tested the same in B2B. I am using EDI version 4020.
    I am getting the following error,
    Segment GS(Functional Group Header) at guideline position 0200 is missing. This segment's standard option is Mandatory.{br}{br}This segment was expected after:{br}{tab}Segment Count: 1{br}{tab}Character: 105

    Hi Anuj,
    I created new ECS file without Envelope.
    Now I am getting the following exception
    <errorCode>AIP-51505</errorCode>
    <errorText>5020: An invalid character was encountered in a data element.</errorText>
    <errorDescription>
    <![CDATA[Machine Info: (dgia21a.cccis.com)
    Element ISA11 data type must be 'Alphanumeric'. Segment ISA is defined in the guideline at position 010.{br}{br}This error was detected at:{br}{tab}Segment Count: 1{br}{tab}Element Position: 11 {br}{tab}Characters: 82 through 83 ]]>
    </errorDescription>
    <errorSeverity>2</errorSeverity>
    <errorDetails>
    <parameter name="InterchangeControlStandard_RepeatingSeparator" value=""/>
    <parameter name="InterchangeTrailerControlNumber" value="000000001"/>
    <parameter name="InterchangeChildCount" value="1"/>
    <parameter name="InterchangeTime" value="1417"/>
    <parameter name="InterchangeUsageIndicator" value="T"/>
    <parameter name="ErrorScope" value="Interchange"/>
    <parameter name="SubelementDelimiter" value=""/>
    <parameter name="RepeatingSeparator" value=""/>
    <parameter name="InterchangeSecurityInfo" value=" "/>
    <parameter name="InterchangeReceiverQual" value="ZZ"/>
    <parameter name="DecimalSeparator" value=""/>
    <parameter name="InterchangeAuthorizationInfoQual" value="00"/>
    <parameter name="ElementDelimiter" value=""/>
    <parameter name="InterchangeComponentElementSep" value=""/>
    <parameter name="InterchangeControlVersion" value="00402"/>
    <parameter name="InterchangeAckRequested" value="0"/>
    <parameter name="InterchangeSenderQual" value="ZZ"/>
    <parameter name="InterchangeReceiverID" value="BBBBBBBBBBBB"/>
    <parameter name="ReleaseCharacter" value=""/>
    <parameter name="InterchangeDate" value="001212"/>
    <parameter name="SegmentDelimiter" value=""/>
    <parameter name="InterchangeControlNumber" value="000000001"/>
    <parameter name="InterchangeAuthorizationInfo" value=" "/>
    <parameter name="InterchangeSenderID" value="AAAAAAAAAAAA"/>
    <parameter name="InterchangeSecurityInfoQual" value="00"/>
    </errorDetails>
    </Exception>

  • Error : Syntax check form not found in function group program

    Hi All,
    I have a function group ZMRMK. In its source code the function-pool SAPLZMRMK contains error
    "Form XYZ does not exits"
    There is an  include in SAPLZMRMK named  lzmrmkf01 : in this include there is an include lmrmkf02 . Here XYZ is called->
    perform XYZ.
    The form XYZ is written in LMRMKF16 and this include is  in function pool SAPLMRMK.
    Kindly suggest how to remove this error.

    Hi
    Yes you do
    But It seems many standard includes are missing in the Z-function group: perhaps this function group was created in another system or in another release?
    It's strange many includes are missing, this is a typical upgrade problem:
    A standard function group was copied, but only some components were copied, so the function group use Z-include and standard ones, now in the new system "old standard includes" calls new routine defined in new include, used in standard function group, but not in Z-function group.
    If it's so, you need to put the missing include manually
    Max

  • Qty update not active, function not possible error in MIGO

    Dear all,
    User faces , u201Cqty update not active, function not possibleu201D error in MIGO.
    The receipt is for an STO and the material is split valuated. Qty and value updation is active and already similar receipt has been done for many qty.
    Throw some light on this
    Regards,
    Antony

    Hi Antony,
    Was the material type for the material changed recently? Pls. check the same.
    If the qty update is active for the receiving plant & material type, then there should not be any issue.
    Regards
    Prabhu S

  • System error: Error when copying parameter function group CR01

    Dear friends
    I am getting the above error while doing the Backflushing in REM.
    It occurs when backflushed quantity is issued ,and while confirming the
    ACTUAL ACTIVITES above error occurs..........
    We have upgrade the system from SAP 4.7 to ECC6.0.
    It is giving some error in CRM system but we don't have CRM system.......
    Message displayed is as below..................
    System error: Error when copying parameter function group CR01
         Message no. CR085
    Diagnosis
         Internal error.
    Procedure
         Repeat the transaction.
         If the error occurs and you have a CRM System connected to your ERP
         System, the document may have been archived in the CRM System.
         If the error occurs again, inform your system administrator. If the
         error cannot be corrected, call the SAP Hotline directly. Describe which
         steps preceeded the error.
    Thanks& Regards
    Sandeep
    Message was edited by:
            Sandeep Bhowmick

    Hi Sandeep
    Standard R/3 does not allow backflush without any operation. You need to have an operation to do a backflush.Error message CR 085 is issued because there is no operation in the routing of the material backflushed. System should issue an error when no operations are found in routing. Although, error message CR 085 is not correct, more appropriate message RM 824 for this a program correction is requried check note (691161).
    Regards
    Prasad
    Reward if useful

  • NewGL- Activation & Function group FAGL_ACTIVATION

    Hello,
    After Activation the NewGL:
    The FI legal reports (Trial Balance, Document Journal, Summarized Ledger,
    etc.) do not work properly (they produce no list) for periods prior to
    NewGL migration date.
    This means by activation the NewGL another total table (FAGLFLEXT) will be taken and not more GLT0.
    The responsible function group for the activation the NewGL is the FAGL_ACTIVATION
    How can I  get the coding place of the selection of FAGLFLEXT and not GLT0? OR how is the best way to search the place
    I have here also an SAP Note 1497918 for the correction of this problem.
    Thank you!

    Hello,
    After Activation the NewGL:
    The FI legal reports (Trial Balance, Document Journal, Summarized Ledger,
    etc.) do not work properly (they produce no list) for periods prior to
    NewGL migration date.
    This means by activation the NewGL another total table (FAGLFLEXT) will be taken and not more GLT0.
    The responsible function group for the activation the NewGL is the FAGL_ACTIVATION
    How can I  get the coding place of the selection of FAGLFLEXT and not GLT0? OR how is the best way to search the place
    I have here also an SAP Note 1497918 for the correction of this problem.
    Thank you!

Maybe you are looking for

  • Keynote and Spaces

    I have a keynote presentation with a hyperlink to a web site, with keynote in one space and Safari in another space(Leopard). When the l select the link and it opens the web site in another space it works fine but when I return to the previous space

  • BDT TRANSACTION FOR SERVICE ORDER IW31

    Hi Frens , I need to use BDT for adding fields on IW31 and i m not able to find the Tcode for the same. Please tell me the TCODE for same; for e.g for Contract account we have CAWM . Please Help Regards Saket.

  • Triggers in OWB

    Hi all, Does anybody know how database triggers can be added through OWB? regards, Zahid Naseer

  • Copy Inventory Master Data to another Item Number

    For the new database setup, I would like to copy from one Item Master Data (all tab details) to another Item Number to save time. Then just edit few fields only. How can I do it?

  • Why constructor of rmi server throws remote exception

    why is it that the constructor of the class extending UnicastRemoteObject i.e rmi server has to throw RemoteException?