Function Groups of different package in ECC 6

Hi,
I am facing a very peculiar problem with using an Include in two different function groups in different packages.
We are moving from R/3 4.6C to ECC 6.
Now FG1 in PKG1 has an Include1 which uses a parameter defined in a function module in same packge PKG1. Its works fine.
And FG2 in PKG2 also has this include1 defined in main program. now when checking the FG2 it reports an error message in that include at that parameter, which is defined in the interface of function module defined in FG1 .
Now whne I read the documentation of a Pacakge it tell me that some visibility and use access concepts has been introduced. Please check the same and tell me if this error could be because of that.
Also To add here taht when i double click on the parameter in FG2 it takes me to the function module which has the defination however still throws an error.
And when i try to simulate similar thing in my own Z packges even the Doble click forward navigation doesn't work.
thanks in advance.
regards,
Vikas
Message was edited by:
Vikas Taneja

Hi Vikas,
CAn you tell the names if they are standard FM and includes.
Regards,
Atish

Similar Messages

Changing function group of function module

Hi
I assigned my function module to function group of different person, which has been transported to quality server. Now whenever I make some changes in my function module, it creates problem to his application.
As it has been released, system is not allowing me to change the function group of my function module. is there any way out so that I can assign my function module to my own function group.
Regards
Vishal Kapoor

Vishal,
if your application is different from the other users application, then you better remove it from the Function group. Create new one and make a copy of it. and then Proceed. Make sure you activated the existing fucntion group. Activate the main program properly.
Regards
Vijay

SE80 problem in ECC with custom function groups

We are in the process of upgrading from 4.64 to ECC 6 and have encountered an unusual situation.
When we bring up a custom function group in SE80, we can no longer see the custom includes in the include section. We can see all other sections. We can still use SE38 to look at an include. The automatically-generated includes are there, such as the TOP, F01 and UXX, but see none of the ones that go with the function modules we've created. When we look at the UXX include, we can see each of the function modules with the include it belongs to. These are function groups that existed in the 4.64 system; they are not new to the ECC system.
We've tried rebuilding the object list at the function group and package levels. We receive no errors and the processes work fine.
Maybe there is a setting somewhere that needs to be updated?

See the solution that Srini has suggested in this thread
OA Framework & JTT Request Parameters
you need to use jtfcrmchrome.jsp to navigate between JTF and OA pages.
Thanks
Tapash

Creating Function group or package.

What is the impact while creating below inputs function group or Package.
Appl. component
Software Component
Transport Layer .
Suppose "profit center data maintenance redesign and/or Dynamic Data storage"
what can I give for
Appl. component
Software Component
Transport Layer .
Thanks in advance.

Hi Sam,
You can find SAP documentation for Application, Software Component and Transport Layer. They are as follows:
Application component ID
Name used to identify the application component
Software Component
The software component describes a set of objects that are always delivered together. A software component is released in succcessive versions with new functions. You can provide each component separately with Support Packages.
Objects are assigned to a software component by assigning the packages of the object. This enables objects from one software component to move to another software component when you switch to a new release.
Transport Layer in ABAP Workbench
The Change and Transport System supports the distribution of development work on large projects across multiple SAP Systems.
The packages in each development system are grouped into one transport layer.
The transport layer determines whether objects are assigned to a local or transportable change request.
Use
Each of your SAP development systems is assigned a transport layer as its standard transport layer. If you use Extended Transport Control, you can assign different standard transport layers to certain clients.
You can define at the most one consolidation target for each SAP System and transport layer.
When you create a package, it is assigned the standard transport layer of the SAP System.
If you want to assign a different transport layer to a package, you require the administration authorization for the Change and Transport System.
The objects in a package automatically have the transport attributes defined for the corresponding transport layer.
If a consolidation route originating in their SAP System is defined, then the objects are assigned to a transportable request, and transported into the consolidation target when it is released.
If a consolidation route is not defined, the objects are assigned to a local request, and are not transported.
Customizing settings are not assigned to a package. They have the transport attributes of the standard transport layer of the system or client.
It is best to assign a package a standard transport layer for which a consolidation route originating in the development system is defined.
To display and maintain the transport layers and routes, use the Transport Management System (transaction STMS).
Only the system adminstrator can make changes.
Regards
Anil Madhavan

Migrate function group from 4.6 to 6.0 ecc

how can we migrate function group and modules from 4.6 to 6.0 ecc
please reply

Hello Yogesh
If you do not want to replace any functionality with new functions from ECC 6.0 but just "move" it to the higher release then import your custom function group into the ECC 6.0 system and remove any Unicode errors.
Unfortunately, transaction UCCHECK appears to be not available on release 4.6.
Further reading: [ABAP and Unicode|http://help.sap.com/saphelp_nw04/helpdata/en/62/3f2cadb35311d5993800508b6b8b11/frameset.htm]
Regards
Uwe

Callin two different subscreens which belong to different function groups

hi,
I have a main screen which contains two subscreens say 'sub1' and 'sub2'. This main screen is part of the function group say 'A'. 'sub1' is also part of this function group 'A' and hence i am able to get the data. But, 'sub2' is part of the function group 'B'. So when i call this subscreen i am unable to fetch the data. So, i wanted to know is there any way to fetch the data from the function group "B" and display it in the subscreen of function group "A".
i wrote the codes like this:
PBO:
CALL SUBSCREEN sub1
        INCLUDING 'SAPLZNEW_ORDER' c_sub1.
CALL SUBSCREEN sub2
        INCLUDING 'SAPLZ_CONTENT' c_sub2.
PAI:
call subscreen sub1.
call subscreen sub2.
The above is not working because the internal tables get refreshed when the call to subscreen 'sub2' is done.
Help will be appreciated with points.
Thanks.

Hi
U have to create 2 fm in function group B:
- one to transfer the data from main screen (so fg A) to subscreen SUB2 (so fg B)
- one to return the data from subscreen SUB2 (so fg B) to main screen (so fg A).
PROCESS PBO.
CALL SUBSCREEN sub1 INCLUDING 'SAPLZNEW_ORDER' c_sub1.
MODULE TRANSFER_DATA_TO_SUB2.
CALL SUBSCREEN sub2 INCLUDING 'SAPLZ_CONTENT' c_sub2.
PROCESS PAI.
call subscreen sub1.
call subscreen sub2.
MODULE GET_DATA_FROM_SUB2.
So u need to insert a module before calling subarea SUB2 in order to transfer the data:
MODULE TRANSFER_DATA_TO_SUB2.
   CALL FUNCTION 'Z_SET_DATA'
       EXPORTING
ENDMODULE.
The IMPORTING paramenter of this new fm has to allow to transfer all data u need to manage the subscreen of SAPLZ_CONTENT.
Here u can insert all code in order to fill the input/output field of subscreen.
In PAI u can insert another fm in ordert to get the data setted in subscreen of SAPLZ_CONTENT':
MODULE TRANSFER_DATA_TO_SUB2.
   CALL FUNCTION 'Z_GET_DATA'
       IMPORTING
ENDMODULE.
The EXPORTING paramenter of this new fm has to allow to transfer all data u need to manage in main screen.
It's import both function modules belong to the function group Z_CONTENT.
Max

How can i get Function Group's property?package,function,includes,etc.

Hi
now,write a log program, need some infor of function group.
I guess all properties saved in a table,but i don't know the table name and fields?
find helps!
best regards!

Hi Jim,
Please try the table
ENLFDIR
GTABLES
or try Function Modules
CACS_LOS_GET_ALL_FUNC
Or try Function Group
SWY_API_FUNCTION_GROUP
Hope it helps...
Lokesh
Pls. reward appropriate points

Upload / download gui-status/dynpro when function group

Hi All,
I'm coding a program where I can download and upload reports and module pools but I tried to do the same with function groups and I found It is different to upload dynpro and gui staus when the objet to generate is a function group.
Could anyone help me a little in order to complete and finish this issue?
Below is shown the routines I coding in order to achive that:
For gui-status uploading I use:
CALL FUNCTION 'RS_CUA_INTERNAL_WRITE'
    EXPORTING
      program   = prog
      language = sy-langu
      tr_key    = tr_key
      adm       = adm4
    TABLES
      sta       = sta4
      fun       = fun4
      men       = men4
      mtx       = mtx4
      act       = act4
      but       = but4
      pfk       = pfk4
      set       = set4
      doc       = doc4
      tit       = tit4
      biv       = biv46c
    EXCEPTIONS
      not_found = 1
      OTHERS    = 2.
For screen uploading I use:
GENERATE DYNPRO gs_d020s gt_d021s gt_d022s gt_d023s ID dynp_id
                      MESSAGE mess LINE line   WORD    word.
    IF sy-subrc = 0.
      EXPORT DYNPRO gs_d020s gt_d021s gt_d022s gt_d023s ID dynp_id.
    ENDIF.
But both options don't work when uploading function groups
Regards...
Edited by: Rob Burbank on Jun 1, 2011 11:58 AM
Edited by: Kenneth Castañeda on Jun 2, 2011 7:31 PM
Edited by: Kenneth Castañeda on Jun 2, 2011 7:34 PM

Hi Kenneth,
sorry, it is really not obvious that [there is a link behind zsaplink|http://code.google.com/p/saplink/].
From the link:
"SAPlink is an open source project that aims to make it easier to share ABAP developments between programmers. It provides the ability to easily distribute and package custom objects."
This software allows you to up- and download all kinds of SAP objects. It is distributed under the GNU General Public License.
I think this is exactly what you are looking for - or I did not understand your question.
Regards,
Clemens

Define local classes in function groups

Hi,
I have seen in few code examples that programmers defined their classes as follows:
1. Interfaces are defined globally i.e. under package->class library->interfaces.
2. implementing classes are defined locally under: package->function group (as public local class in the function group).
My question is What is the advantage/disadvantage of it?
(beside encapsulation).
I heard that the class loader is working better in that way, is that right?
thanks,
Yaron

Hi
excuse me I miserunderstood.
Perhaps it's true I don't know.
I think the different is the SE24 is a library, so it's the tool arranged to analyze all class components you can need.
I don't think it's easier to analyze an include (function group) where the class is defined and implemented.
You shuold measure the time in order to load the class for both case, but probably the different isn't meaningful.
You should consider that ABAP wasn't OO language, but it was adapted for OO, and so the most ABAP developer weren't used to use OO.
I think you should define a class as local class if it's your own class.
Max
Message was edited by: max bianchi

Delta functionality between SAP 4.7 and ECC 6

Hi All,
Can anyone please provide me with any documents or links on delta functionality between SAP 4.7 and ECC 6.0 in MM/WM.
Any information would be helpful.
Regards
Prashant

Hello
Following are the basic differences as far as MM Module is concerned;
Pickup list - Batch where-used list display in transaction MB56
u2022 Until release 4.7, the top-down and bottom-up analyses in the function pickup list for batch where-used list (transaction MB5C) were displayed only in the form of simple output lists. As of release 6.00 of SAP ERP Central Component, the function pickup list for batch where-used list branches to the batch where-used list itself (transaction MB56).
u2022 In addition, user can define how the data in the batch where-used list is displayed, in the initial screen.
u2022 User can use all the settings available in the batch where-used list. For example, he can expand transfer posting or display vendor batch. However, it is not possible to limit the selection to valid plants in the initial screen of the pickup list.
Usability enhancements for transaction MIGO for the posting of goods movements
u2022 For goods movements that refer to purchase orders as reference documents (for example, goods receipt, goods issue, subsequent adjustment), user can specify the ordering plant as an additional selection criterion directly next to the purchase order number and the item number.
u2022 There is a new default value: "copy account assignment fields." When entering other goods receipts, user can copy existing account assignment data from the previous item to use as the default values for a new item. To do this, user has to set the copy account assignment fields indicator in the default values.
u2022 User changes the default values in the menu path "Settings -> Default Values."
u2022 Goods movement is monitored with reference to a material document. When you enter the following goods movements, it is possible to specify a material document, such as the following, as the reference document:
Goods receipt
Goods issue
Transfer posting
Remove from storage
u2022 Note that these material documents must be documents that have arisen from a goods movement without reference ("Others") and that are not reversal documents.
New report : display list of invoice documents (MIR5)
u2022 Logistics invoice verification offers a new report display list of invoice documents (RMMR1MDI), w hich user can use to display such a list (Transaction is MIR5).
u2022 As an addition to the existing program invoice overview (transaction code MIR6), user have extended selection criteria and display options. For example, on the initial screen user can make selections by one-time customers, invoice gross amount, and entry date.
u2022 User can also show an expert mode, which enables him to select at plant level by FI document, GL A/c posting, and Material Posting.
u2022 In the output list, the report shows both posted and held invoices.
u2022 It does not show invoices without a corresponding FI document; such as invoices planned for verification in the background or which the software has already verified as containing errors.
Requirement prioritizations in materials management
u2022 With Requirement Prioritization functionality user can assign requirement urgency at item level in purchasing and reservation documents.
u2022 The software determines the relevant requirement priority (overall priority) of a material requisition from the combination of requirement urgency group and organizational priority.
Mass maintenance of outline agreements
The following two transactions available:
u2022 Mass maintenance for contracts: transaction code MEMASSCONTRACT
u2022 Mass maintenance for scheduling agreements: transaction code MEMASSSA
Commitment plan for purchase contracts
u2022 With the function of the commitment plan for purchase contracts, it is possible to pre plan value consumption for a purchase contract.
u2022 To this end, a commitment plan is generated for each document item of the relevant contract.
u2022 This commitment plan itself can have any number of items.
u2022 User can define a value and a validity date for each commitment plan item.
u2022 This enables user to pre plan different values for different periods of time.
u2022 The software generates an earmarked fund document for a defined commitment plan item.
u2022 This earmarked funds document can in turn contain several different items with different account assignments.
u2022 The software adopts these account assignments from the item account assignments of the commitment plan.
u2022 If a purchase requisition or purchase order references this contract, the earmarked funds document is copied into the purchase order, and the account assignment is adopted from that document.
u2022 Account assignment to a different account assignment object is then no longer allowed.
Availability check in "Enjoy purchase order and requisition"
u2022 Display and checking of availability are invokable separately in the "Enjoy purchase order and requisition" function, in line with the software behavior on the sales side.
u2022 User invoke the display and checking of availability in the "Enjoy purchase order" function (transaction code ME21N) and the "Enjoy purchase requisition" function (transaction code ME51N) as follows:
To display the availability overview, choose the menu path "Environment -> Availability." - To check availability, choose the "Check Availability" icon.
Until this release, if user carried out the availability check for an item of a stock transport order, the software adopted confirmations as per the desired date/time only.
u2022 Two settings are possible with availability check:
Confirmation as per desired date/time (this is the standard setting and corresponds to previous software behavior)
Delivery proposal - Full confirmation
External services: putting service items in the purchase order on hold (changed)
User can put purchase orders with service items on hold if these items do not contain any errors. Purchase orders with service items can also be put on hold if errors occur only at header level or as a result of the availability check.
Customizing transactions OX18 replaced by view
The assigned customizing transactions have been replaced by the following view in the following implementation guide activity in customizing for the enterprise structure: Assign plant to company code: transaction OX18 replaced by view V_T001K_Assign. One will find this activity in the implementation guide under the menu path "Enterprise Structure -> Assignment -> Logistics General -> Assign Plant to Company Code."
Goods receipt: new movement types in inventory management
The following new movement types are available in inventory management:
107: Goods receipt to valuated goods receipt blocked stock
109: Goods receipt from valuated goods receipt blocked stock
Prepayment of invoices
This functionality is characterized as follows:
u2022 User can trigger prepayment of vendor invoices in logistics invoice verification.
u2022 User use the prepayment function for vendors with whom organisation has a good, long-standing relationship.
u2022 The function enables payment soon after issue of the invoice and full exploitation of the date of required payment and existing cash discounts, by posting the vendor liabilities, taxes, and cash discounts in financial accounting in advance.
u2022 The software executes the payment of the invoice regardless of the relevant goods receipt and the outcome of the invoice verification check.
u2022 Most logistics invoice verification standard functions are not affected by the prepayment function.
u2022 When the software posts invoices, it continues to execute the standard checks.
u2022 If the software has already posted the prepayment document, user can make only restricted changes to the header fields of the invoice.
u2022 To ensure adequate and orderly financial accounting postings, a prepayment clearing account has been added to SAP ERP Central Component.
u2022 Upon prepayment, the software debits this account and then settles the account again after executing the check.
Purchasing accounting information to the former SAP Business Information Warehouse
u2022 With the transfer of the purchasing account information to the former SAP Business Information Warehouse component (whose functionality is now part of SAP Net Weaver), it is now possible to maintain Info Cubes, reports, and queries that can determine how and where the costs from purchasing documents have been assigned and controlled.
u2022 As part of the software, a new data source (2LIS_02_ACC) has been created and the purchasing extraction process extended to cover the account information for purchasing orders, schedule agreements, and contracts.
Automatic settlement of planned delivery costs with evaluated receipt settlement (MRDC)
u2022 A new report (RMMR1MDC), available within the logistics invoice verification, can be used to automatically settle planned delivery costs.
u2022 To invoke the report, from the SAP easy access screen, choose the menu path "Logistics -> Materials Management -> Logistics Invoice Verification -> Automatic Settlement -> Automatic Delivery Cost Settlement" (transaction code MRDC).
u2022 Functionality for report RMMR1MRS is enhanced.
u2022 User can use the report RMMR1MRS, "Evaluated receipt settlement with logistics invoice verification (LIV)" (transaction code MRRL), to settle planned delivery costs in addition to goods and service items within logistics invoice verification.
u2022 To do so, set the relevant indicator on the initial screen of the report.
Parking service items
It is now possible to put service orders without errors or with commitment errors on hold.
Report MB5B : Stock on Posting Date
u2022 This Report is available with "Non-Hierarchy" display option which provides details of Opening, Receipt, Issue and Closing balances of Stock with quantity and value both for a given period.
u2022 This functionality is not available in Release 4.7.
Stock Transfer Between Storage Locations
u2022 Function of stock transport orders between storage locations is available from ECC 6.0 onwards.
u2022 As a result of which user can input issuing storage location with supplying plant.
u2022 Facility of using different delivery types for different issuing storage locations is available.
u2022 Shipping Point data can also be determined based on the issuing storage location.
If u want to know more go through the following links
http://solutionbrowser.erp.sap.fmpmedia.com/
http://help.sap.com/saphelperp2005vp/helpdata/en/43/6880cbb88f297ee10000000a422035/frameset.htm_
https://wiki.sdn.sap.com/wiki/display/ERP6/ERP2005+Upgrade
check following
http://help.sap.com/bp_bblibrary/500/html/U40_EN_IN.htm
for more help check following
http://help.sap.com/bp_bblibrary/500/BBlibrary_start.htm
Go through the following link for the Delta functionality notes
http://solutionbrowser.erp.sap.fmpmedia.com/
Regards
Priyanka.P

Transporting a Function Group

Hi All,
I created a new function group and few function modules within it. Function group is attached to one transport request. But for some reasons I want to transport it with some different transport request. So I deleted it from original request.
But now when I am trying to activate the Function Group, It is not attaching the associated function modules and includes within the function group to new transport request. It is only attaching Function group Text and Main program to transport.
Please let me know the way by which I can attach complete function group its related function modules and includes to one transport.
Thanks,
Harkamal
Fixed subject line
Message was edited by:
Rich Heilman

Hi Rich,
It is not attaching the Function group, it is attaching only "Function Group Text".
Thanks,
Harkamal

Copying function module from one function group to another

What is the efficient way to copy a module from one group to other so that all its subroutines and any dependencies with in the FM can also be copied?

Hello,
Tcode:SE37
Menu: FunctionModule->OtherFunctions->Copy in that there are different option give a new name of the function group this should work
regards
suresh nair

IDOC Scenario - User has no RFC authorization for function group EDIN

Hi all,
I'm trying to configure an IDOC scenario from ECC to XI.
RFC's, ports and destinations already configured. On WE19 I'm creating an IDOC for testing the scenario. The IDOC is sent successfully, and it stops on TRFC Monitor with error "User PIRFCUSER has no RFC authorization for function group EDIN." .
Some of you knows what authorization is needed? Basis team said the roles are the same at DEV environment, and there this scenario works fine.
Thanks for your help.
regards.
Roberti

Hi,
Check with PIRFCUSER user , that is having the right authorization or not ..
And make sure that this user is present in the system & it should not locked.
to check that user is present or not-----goto su01 of the system & check
Regards
Seshagiri

Function not found when package name exists with same name as schema name

Hi all, any help would be appreciated :)
I found an issue with pl/sql resolving a functions location when the db has a package name with the same as the db schema name.
My example:
-- arbitrary test function, not in any package
create or replace FUNCTION testFunc
inTest IN VARCHAR2
RETURN VARCHAR2
AS
BEGIN
RETURN 'a';
END;
-- There is a package called "FM" with functions that are not referenced or used in this example and the db schema is "FM".
-- The following PL/SQL fails with the message: "ORA-00904: "FM"."TESTFUNC": invalid identifier"
select cursor (select testFunc('a') from dual) from dual;
-- The following PL/SQL works:
select * from (select testFunc('a') from dual);
As mentioned the function testFunc is NOT in the FM package. This issue does not happen when I remove the FM package. So it seems like there is an issue with cursors calling functions when there exists any package with the same name as the db schema.
Can anyone tell me why this happens and also what I can add to force the function that is not in any package to be referenced (without Oracle trying to look in the FM package)?
DB: Oracle 11.2.0.2
thanks!
Paul

Hi Paul,
In general I would not advice to have schema and objects with the same name.
Here is what documentation is saying here: How Name Resolution Differs in PL/SQL and SQL
PL/SQL uses the same name-resolution rules as SQL when the PL/SQL compiler processes a SQL statement, such as a DML statement. For example, for a name such as HR.JOBS, SQL matches objects in the HR schema first, then packages, types, tables, and views in the current schema.
PL/SQL uses a different order to resolve names in PL/SQL statements such as assignments and subprogram calls. In the case of a name HR.JOBS, PL/SQL searches first for packages, types, tables, and views named HR in the current schema, then for objects in the HR schema.As you can see above when using PL/SQL for your case Oracle searches first for packages, types, tables, and views named FM in the current schema, then for objects in the FM schema.
And because a package FM is found it is raising an error due to the fact that the procedure could not be found in that package.
I hope this clarify.
Regards.
Al

Problem in adding function group inlcude in new transport request

Hi friends,
This is regarding the issue while moving the function group developed for BAPI object to production.Include having the suffix UXX in main program of function group I am not able to change and then save in new transport request,but the same is possible in R/3 4.7 version.
Can you please help me out to get it done in ECC 6.0.
Regards,
Rajesh Akarte

Did you try to do: Put cursor on transport number-select include icon-say select freely selected objects-I usually say dev class and can highlight and select the object and save. Please reward points if helpful.
Message was edited by:
Tom M.

Function Groups of different package in ECC 6

Similar Messages

Maybe you are looking for