Function key not Working Properly

function key fliped mean ,when i press F6 only this will mute my volume. and when i press FN+F6 it work as F6 when i Press FN+F5 it refresh , when i press F5 only nothing happenplease give solution .

Hi
Disable Action Key in BIOS:
support.hp.com/in-en/document/c02035108
Regards
Visruth

Similar Messages

Satellite L850 - Special function key not working properly

Hi Everyone,
I had Satellite L850 (pskg8a-07f001) running windows 8 64 bite for just 2 months.
Just within this week, the special function key not working, each time I start the pc, i have to go into toshiba desktop assist then function key then click ok, it will working.
But the touch pad has been set as enabled, also under keyboard setting has been set as special function mode. But don't know why each time start the pc have to go into function key box then click ok.
When I bought it everything is ok, i can use the special function key to turn up and down the volume and disable wireless...etc
Please advise. Thks a lot!

Take a look here:
Function key changes in Satellite and Qosmio 800 series
http://aps2.toshiba-tro.de/kb0/TSB2903E00000R01.htm
You can use the traditional FN + F key mode or just an F key mode.
This can be enabled and disabled in BIOS or the HWSetup
In BIOS go to Advanced -> System configuration -> Function key mode
This mode can be changed
Also be sure that Function Button option is enabled too

Windows 7 Brightness and Function key not Working Properly

i have HP 15-af024AU APU Quad Core A8-7410 - (4 GB DDR3,1 TB HDD) Noteboook and it came with windows 8.1 preinstalled than i installed windows 7 ultimate.
i have problem in Display Brightness i am not able to change Brightness by function key or by manually from windows settings.
2. my Function key are not working properly . all key are fliped whiout holding function key it work as function key. 3. bluetooth is not working when i search for new device not able to find any available discouable bluetooth device. 4. wireless button software is not wokring in windows 7 i already updated my bios that available in drivers support and install alll drivers too properly so please give proper drivers for windows 7 for this product that works perfect.

Sorry that driver didn't work. You can try this graphics driver and if that doesn't work, unfortunately, I won't be able to help you with that issue. This package provides the AMD High-Definition (HD) Graphics Driver and Catalyst Control Center for supported notebook models that are running a supported operating system. For notebooks with switchable graphics modes, this package includes drivers for both graphics processing units (GPUs). Switchable graphics enable users to switch between a power-saving graphics mode (normally used under battery power) and a high-performance graphics mode. If high-definition multimedia interface (HDMI) video output is supported, this package also installs the HDMI Audio Driver. File name: sp71253.exe As far as the Fn keys being 'flipped,' I have no idea what you mean by that, or what to do about it. Did you install the software that controls the funtion keys? This package contains the HP System Event Utility, which enables special function keys on supported notebook models to be programmed. For example, HP System Event Utility enables users to press the Fn+ESC keys to view system information. This software works with the supported operating systems. File name: sp71156.exe

G510 installed Windows 8.1 Function keys not working properly

Hi
I am Bharath
last week i have puchased lenovo g510 laptop and installed windows 8.1 and later on automatically function keys and all the keys were not working properly. if i press key to increase brightness and some other operation is performing by its own. What's wrong with this LENOVO brand is this the way you take lots of money from people. I need an immediate solution from basic support to my home. If at all it is not resolved i will file a case on consumer court that LENOVO was chaeten me and what ever it may be i will go for end.
Give me a clear answer with out any stupidity
Moderator Note; subject edited; post moved here to start new thread

hi bharath666,
Welcome to Lenovo Community Forums!
Were you able to install all the drivers and Software After the New installation of Win 8.1?
Get the drivers here
http://mobilesupport.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/lenovo-...
Start with the Chipset installation first then whatever comes next.
Make sure you select the proper version for your Windows type and version.
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Function Keys not working properly after recent update today.

Sat C855 - today I downloaded the 2 recent updates & now my function keys aren't working properly. Anyone one else have that problem? What can I do?

Hi! Night shift here! You can find the full model number on the bottom of your laptop. Jerry might not log on again tonight!
Dokie!
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.
Attachments:
Capture40.JPG ‏366 KB

ITunes Media Function Keys Not Working

So I picked up a new MacBook Pro Retina 13" a week or so ago, and it's going great so far, except for one thing. It seems that the Media function keys aren't working in iTunes?
I checked under the keyboard preferences to ensure the "standard function" keys box wasn't checked, and it wasn't. All the other functions keys are working properly except the back, play/pause, and skip keys. I tested the keys with other functions, such as setting a shortcut to the F8 key, and it recognized the input, so its not a hardware issue.
I tried to find help elsewhere, but most people seemingly just had that box in the settings checked, which wasn't the problem for me it seems.
Any suggestions?

lions99 wrote:
Hey guys,
I see that most of you are having a issue with the function keys.
Try this- http://goo.gl/gdlS3?
This is a hotfix for this issue. Now keep in mind this only supports
Windows 7 Enterprise
Windows 7 Home Basic
Windows 7 Home Premium
Windows 7 Professional
Windows 7 Starter
Windows 7 Ultimate
So if you don't have this, then don't run this fix.
Also, If you guys can give me your product # and complete model name of the notebook you have, so I can send you a link to update your BIOS.
Here is a link to show you how to find your product #- http://goo.gl/vYKya
THX
Thank you for your help, but another person had already answered me. =]
After I re-installed the keyboard drivers, the "fn + " keys became functional again. The driver i installed was "HP Quick Launch Buttons" or just "sp49456" if you want to know.
Thank you for your help, I am very pleased with it.

F12 function key not working on my Pavilion DV6 7170er

I'm runung windows 8 X64 bit version. i'm using win 8 since few months, all that time function key work properly until hp support assistant update my system bios version to f.24 automatically .after that cause that problem f12 key is not working it's indicate amber lite every time,can't switch on wifi, if wifi on it have to turn into white clolor.all other function keys are working properly.i checked evety thing, device manager saying wifi adapter working properly but windows 8 mobile center showing it's turn off.i checked via bios system components it's showing wifi adapter "PASSED". hp connection manager programs can't open it's hanging long time and after that showing error massage - error code 80080005 .
Please if any one have suggest let me know...
Thank you...

gaurian82,
I’m glad to hear that everything is working.
Thanks for posting the solution that you found.

Copy Function is Not Working properly In Order Management

Hi,
Description-
When an order with remnant model is copied, it copied only the topple model line and they include items attached to the top model line. It doesn’t copy the
option class lines and the option item lines (unshipped and shipped).
Example-
Enter an order with for pd-pto-model. See order#21231.The ordered quantities and structure of the model is shown below:
pd-pto-model 5 qty
pd-std-item1 (included item) 5 qty
pd-pto-oc (option class) 5 qty
pd-std-item1 (included item with rfr checked) 5 qty
pd-std-item2 (option item with rfr checked) 5 qty
pd-std-item3 (option item) 5 qty
Booked the order and pick relased the order. While shipconfirming only shipped 5 qty of pd-std-item3 and staged the rest. On querying the sales order, the line status is seen correctly as follows:
pd-pto-model Closed
pd-std-item1 (included item) Picked
pd-pto-oc (option class) Closed
pd-std-item1 (included item with rfr checked) Picked
pd-std-item2 (option item with rfr checked) Picked
pd-std-item3 (option item) Partially Interfaced to receivables
Copied this order from the order header. The new order# is 21232.On querying the order, I see only 2 lines as follows:pd-pto-model.
Anyone can help me on this issue.
Thanks,
Chinna

haisrig wrote:
Hi ,
We are facing an issue with select() in Solaris 10. we had written a sample program to this issue.
Program name :- sel.cpp
int main()
struct timeval sleeptime;
sleeptime.tv_sec = 60;
printf("1\n");
select(0,NULL,NULL,NULL,&sleeptime);
printf("2");
return 0;
When i run this program in Solaris 9, its printing 1 and after one minute its printing 2.
When i run this program on Solaris 10, its printing 1 and 2 without waiting for 60 seconds.
When i tried to print tv_usec, its printing as 0 in solaris 9 and some garbage values in solaris 10.
I think because of that the above select function is not working properly in solaris 10.
Why the tv_usec is not taking 0 as default values in Solaris 10?
We are using our legacy code for past 20 years. So, before going to do any changes we are trying to find why this happenig like this.Hi
It sounds to me that you've been lucky for 20 years then.
Local POD variables on the stack that aren't explicitly initialized can contain any value. Here's what I see in your app with dbx
(dbx) run
Running: sel
stopped in main at line 9 in file "sel.cpp"
    9      sleeptime.tv_sec = 60;
(dbx) print sleeptime
sleeptime = {
    tv_sec = -4198732
    tv_usec = 0
}That's on a Solaris 10 SPARC machine. If I try it on a Solaris 10 x86 box then I get
(dbx) print sleeptime
sleeptime = {
tv_sec = -830490588
tv_usec = 134510556
and I see the behaviour that you describe.
Paul

Select() function is not working properly in solaris 10.

Hi ,
We are facing an issue with select() in Solaris 10. we had written a sample program to this issue.
Program name :- sel.cpp
int main()
struct timeval sleeptime;
sleeptime.tv_sec = 60;
printf("1\n");
select(0,NULL,NULL,NULL,&sleeptime);
printf("2");
return 0;
When i run this program in Solaris 9, its printing 1 and after one minute its printing 2.
When i run this program on Solaris 10, its printing 1 and 2 without waiting for 60 seconds.
When i tried to print tv_usec, its printing as 0 in solaris 9 and some garbage values in solaris 10.
I think because of that the above select function is not working properly in solaris 10.
Why the tv_usec is not taking 0 as default values in Solaris 10?
We are using our legacy code for past 20 years. So, before going to do any changes we are trying to find why this happenig like this.
Thanks a lot.
Regards,
Srikanth.

haisrig wrote:
Hi ,
We are facing an issue with select() in Solaris 10. we had written a sample program to this issue.
Program name :- sel.cpp
int main()
struct timeval sleeptime;
sleeptime.tv_sec = 60;
printf("1\n");
select(0,NULL,NULL,NULL,&sleeptime);
printf("2");
return 0;
When i run this program in Solaris 9, its printing 1 and after one minute its printing 2.
When i run this program on Solaris 10, its printing 1 and 2 without waiting for 60 seconds.
When i tried to print tv_usec, its printing as 0 in solaris 9 and some garbage values in solaris 10.
I think because of that the above select function is not working properly in solaris 10.
Why the tv_usec is not taking 0 as default values in Solaris 10?
We are using our legacy code for past 20 years. So, before going to do any changes we are trying to find why this happenig like this.Hi
It sounds to me that you've been lucky for 20 years then.
Local POD variables on the stack that aren't explicitly initialized can contain any value. Here's what I see in your app with dbx
(dbx) run
Running: sel
stopped in main at line 9 in file "sel.cpp"
    9      sleeptime.tv_sec = 60;
(dbx) print sleeptime
sleeptime = {
    tv_sec = -4198732
    tv_usec = 0
}That's on a Solaris 10 SPARC machine. If I try it on a Solaris 10 x86 box then I get
(dbx) print sleeptime
sleeptime = {
tv_sec = -830490588
tv_usec = 134510556
and I see the behaviour that you describe.
Paul

E545 and Function key not working

Any help here is apprecited. My function (Fn) key is refusing to work at all. None of the special features are able to be used. I've checked all my drivers, and followed the instructions in the User Guide, but some of the options described in the guide are even showing on my computer.
I'd love for some help on this issue, as the computer is pretty worthless right now.

Hi Jamesbjenkins,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with keyboard function keys not working on your ThinkPad E545.
Is the system updated with all the latest drivers and application? To confirm with I request you to run ThinkVantage system update tool. This will search for all the required drivers and application for your system and will update.
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Keyboard windows key not working properly

I am not able to navigate to start screen with regular windows key press. I need to press hard to navigate to the start screen. But other functions with windows key is working properly. For Eg: Windows Key + R is working properly with regular press. Please help.

Hello:
I do not know of a setting that would do that - especially intermittently.
I would suspect the KB is failing/has failed.
Barry

Toshiba Satellite C850-F12S Function Keys not working

I recently formatted my laptop after the OS was corrupted by a virus and reinstalled windows 7 but now my Function keys that enable me to adjust brightness, volume and turn on wireless are not functioning, They only work when in BIOS setup and even when I tried to enable them to be standard F1-12 or special function keys they still dont work after starting windows. This computer has no flash cards for toshiba and i dont know which drivers to look for for this specific model. I also lost toshiba eco-utility and its player. How do i get all this back without losing my data?I have partitioned my hard disk.

Hi Eldorado
Thanks for your suggestion. Have done as you said but still have the problem.
I've managed to get rid of the TouchED error dialogue by uninstalling the Touchpad on/off utility, but I can't get the function keys to work again. The problem appears to be that the Common Modules drivers are not reinstalling properly - the software (thotkey.exe) that operates these has to be within this. I have tried extracting the cab files for the Common Modules but nothing with let me into Toshiba's cab files to see if they are there so that I can copy them across manually.
I can live without the function keys on my machine, but this is a pain - especially when I'm sure the problem has a simple solution.
Cheers
David

New Apple Wireless Keyboard Function Key not working ON 10.5.8

Tried updating keyboard os, disconecting reconnecting. Selecting/deselecting option in keyboard options. power off and on
Cannot get function key to work
Thanks

found answer here- my wireless keyboard model is MC184LL/B
http://store.apple.com/us/question/answers/product/MB110LL/B?pqid=QXXHTX4T747AAF PXKHXCC72CYAXYU7XXYUPK9UFC74K27FPKF
The Function keys will not all work properly on 10.5.8, all the other keys will be fine. The previous model MB110LL/A would work with all the Function keys on Leopard or Snow Leopard.

Display has white and grey lines and blocks crisscrossing it and touch functions are not working properly on half the screen.

I dropped my iPhone 5S and it landed flat on it's face (it was in a protective case). Since then my touch screen display is not working properly. I have white and grey lines and/or blocks crisscrossing the screen both horizontally and vertically. Screen responds to touch in odd random ways, but rarely does what I am trying to do. Can't call or receive calls because can't dial or answer phone via swipe. Can't text or read incoming texts. All functions seem to be working except that I can't access them because the touch screen is acting up. If I move the phone around it randomly accesses different apps or functions, but I have no control over them once the appear on the screen. Touching screen just causes phone to randomly choose something else to open. What have I damaged?

Shanegang77 wrote:
What have I damaged?
We cannot possibly tell. Obviously some hardware inside. Take it in to an Apple Store. They will offer you the opportunity to swap the phone for $269 in the US. Prices vary by country.

Key not working properly

I bought E-71 about one month back. I upgraded its software to 110.07.127. After this upgrade process, the keys are not working properly.
For example, the key titled '?' is not printing '?' while another key titled '.' is printing '?'. This problem is for the whole keypad.
FYI, my keypad also contains the Arabic letters. They are also not working after this upgrade.
Software upgrade is done from the following link: http://www.nokia.co.in/A4767968
Thanks a lot in advance for the kind support.
Nabeel ur Rehman
Nabeel ur Rehman
Solved!
Go to Solution.

This has happened because your phone was most likely imported and modified before it was sold you you. Updating the firmware has reset it back to it's default configuration
You need to contact a nokia care point for help getting it back working properly. If the care point isn't an option visit the retailer where you purchased it.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

Function key not Working Properly

Similar Messages

Maybe you are looking for