Function Key Randomly activates

My function key randomly activates without being touched. It will happen in any application I may be using. If I have the Keyboard viewer open I can watch the key activate on it's own. Sometimes it says activated and other times it will flash on and off without even touching the keyboard.
I doubt it is the keyboard because I have replaced that.
A restart usually corrects the problem for awhile.
Any ideas?

this sounds like a keyboard hardware fault. replacing the keyboard may be your only solution to this. you could try disconnecting the keyboard and then reconnecting it, but i wouldn't hold out too much hope.

Similar Messages

  • [SOLVED] Function Keys Problem On Dell Inspiron N5010

    Yesterday I bought a new laptop (Dell Inspiron N5010) and immediately installed Arch Linux on it. But when I launched the installation framework, I needed to use fdisk to partition my drive manually and to open another tty, ctrl + alt + f2 or up to f7, none of them worked. When I use f4 or f5 for example, it changes the brightness of the screen cause these keys have icons on them which represent the brightness control. So I quitted, took care of that fdisk issue and got back, installed Arch Linux successfully. When launched in GNOME 3, nothing was changed. It still uses f1, f2, ... and so on as "just function keys" without using "Fn" key. It's fine somehow cause my system automatically detected those keys, I can use every single function of my keyboard. But without using Fn key, I can't actually use any fx key for my own use. For example, I can't use Tilda anymore cause when I use only f1, it tries to open monitor control stuff.
    So... any ideas?
    Edit: It seems that this problem is all about Arch Linux. A friend of mine has the same laptop and he has just tried Mint Debian RC and function keys worked properly. So, there's a problem and it seems it's related to Arch Linux (or maybe Xorg version, somehow?).
    Last edited by Jeaquares (2011-05-18 13:07:06)

    xdunlapx wrote:The function key on my dell laptop was set to the F keys, meaning you have to hit the function key and then an F key to activate the F key. I switched it in the bios so I don't have to hit the function key to activate the F keys. So I would have had to hit Fn+Ctrl-Alt-F1 for example to get to TTY 1. Now since i switched it off in the bios All I have to do is hit Ctrl-Alt-F1 to get to the terminal. But in order to turn off wifi from the F key (for example) I have to hit Fn+F2. It's switched.
    I can't tell you how this was helpful. I've never noticed that there was an option in BIOS's Advanced menu for this. I updated it as "Function Key" and it solved my problem, thanks.

  • I have a macbook pro with OSX Mavericks 10.9.5 and some keys that are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys.  What's really weird is that happens randomly.  I've never spilled anything on it

    I have a macbook pro with OSX Mavericks 10.9.5 and some keys randomly are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys.  What's really weird is that happens randomly.  I've never spilled anything on it, and I can't for the life of me figure out how to fix this.  Can anyone help?  of course this happened after my warranty expired.

    **update**
    I don't know if this will help someone but I am posting this for that purpose.  In the past when I first had this problem, I'd read a post somewhere (sorry, long ago, don't have the link) where an individual was having the same problem and they stated that when the MBP got heated, that's when the keys would stop working, and they went into the MBP and jiggle some stuff around (a specific wire, I'm not electronically inclined so I know NOT of what they spake!).  Well I didn't want to do that but it always stuck in the back of my mind.  I had given up, really, and was planning to take my MBP to the apple store.  But by chance one night I left my MBP on the floor where it's cool, and when I turned it on, the problem went - poof! It seems there was some validity to the post that spoke about heat, because my problems started when I would stream foreign dramas on my MBP for hours at night, and I would hear the fan going off all the time, and in the mornings, my "p", "enter", "0", ";", and all the function keys would stop working. 
    So, maybe try keeping the MBP in a cool place when it's off.  Since I've started doing this overnight every night (keeping it on the cool floor, out of reach of any big feet), I have not had a single problem with my keyboard.
    Hopefully this might help someone.

  • My Imac function keys seem to be inop. How do I activate?

    My IMac w/ OS 10.5.8 has inop function keys. I've just added a wireless keyboard and mouse?

    Eustace Mendis wrote:
    The new Apple extended keyboard has those functions already programmed in. This is from the advertising pitch:
    It also has function keys for one-touch access to a variety of Mac features such as screen brightness, volume, eject, play/pause, fast-forward and rewind, Mission Control, and Launchpad.
    The short answer to your question is that keys are wired differently on different keyboards.
    No, it depends on the setting chosen in Keyboard Preferences. (see my earlier post)

  • How can I use Automator to toggle the Function Keys?

    I am trying to create a Automated process to toggle the Function Keys on my keyboard. This is because I use several programs, including After Effects, which use the F1-12 keys, but when I am not using that program I commonly use the Apple-defined shortcuts on the keyboard. I have a full-sized keyboard, hence no Fn key. So that's out right away – I've read several comments on this topic where people suggested that this is the ONLY option. I refuse to beleive that.
    Automator contains a "Watch Me Do" feature, which I have tried to use to record this process. Problem is, it never clicks the right object. If I record clicking the dock, the magnification (I suspect) throws off the virtual-controlled mouse and picks the wrong object. If I record the Apple Menu route, it gets it about 1/2 the time.
    I think what I'm really looking for is a console command I can feed into the Terminal which toggles the keys. It seems to be that this HAS to be an option, even if it is more than one line of commands. I believe if I can feed this process into Automator, it would work.
    Any ideas?
    Thanks in advance, Mac Geniuses!

    iKey lets you define function keys per application. You seem to want to turn on & off the defined apple keys.  Not sure if these keyboard re-mappers will do the trick.
    Here is my other most favored application. Of course, I haven't checked these out in newer OS's. I'm a Tiger man myself.
    iKey is a front end program that simulates typing and mouse movements. I use iKey to remap the Function keys.
    "iKey is an automation utility, a program that creates shortcuts to accomplish repetitive tasks. In essence, an iKey shortcut is a little program in its own right, but you don't need to know the first thing about programming to create an iKey shortcut. All you have to do is put together three necessary parts of a shortcut: One or more commands that give the shortcut its functionality, a context in which it runs, and a launcher that defines how the shortcut is activated."
    http://www.scriptsoftware.com/ikey/
    iKey  has a little more function then the previous free version called youpi key. For many years, I used youpi key before switching to iKey.  It works fairly well for me in MAC OS 10.4 although not officially supported.  The youpi key download is hard to find & no longer here.
    http://www.versiontracker.com/dyn/moreinfo/macosx/11485&vid=75326
    ( Send me a message for a copy of youpi  key. )
    *Examples:*
    I have the common programs that I use assigned to function keys. I have F4 assigned to Firefox. When I want to start FireFox, I press F4. When I want to switch to firefox, I press F4! Starting & switching to an application in Mac OS are the same thing in Mac OS.
    Here is an example of to assign volumn control to a function key.
    http://discussions.apple.com/message.jspa?messageID=10361085#10361085
    Here is my script for listing my application folder. I have it assigned to function-key 6.
    tell application "Finder"
       open folder "Applications" of startup disk
       select Finder window 1
       set bounds of Finder window 1 to {-3, 44, 691, 545}
       --set position of Finder window 1 to {33, 44}
       set position of Finder window 1 to {60, 45}
       activate
    end tell
    The second portion of this script was generated in the script editor record mode. After I recorded the script and did some editing, I copy the script to ikey/youpi key.
    Full Key Codes
    http://download.cnet.com/Full-Key-Codes/3000-2094_4-44175.html
    Spark
    "Spark is a powerful, and easy Shortcuts manager. With Spark you can create Hot Keys to launch applications and documents, execute AppleScript, command iTunes, and more... You can also export and import your Hot Keys library, or save it in HTML format to print it. Spark is free, so use it without moderation!"
    http://www.versiontracker.com/dyn/moreinfo/macosx/22675
    Mac OS X remap or rename keyboard keys
    by vivek
    So how do you remap or rename keyboard keys under Mac OS X?
    Simply use DoubleCommand software.  It is a free program
    http://theos.in/apple/download-doublecommand-to-remap-keyboard-keys/
    Keyboard Maestro is a powerful macro program for Mac OS X (including Tiger and Leopard) which has received glowing reviews. Keyboard Maestro will take your Macintosh experience to a new level in “Ease of Use”. With Keyboard Maestro you can design a custom action sequence with your own shortcuts and use them at any time, you can navigate through running applications and open windows with Program Switcher, and you can work with an unlimited number of clipboards - all by pressing simple keystrokes.
    http://www.keyboardmaestro.com/main/
    "Spark is a powerful, and easy Shortcuts manager. With Spark you can create Hot Keys to launch applications and documents, execute AppleScript, command iTunes, and more... You can also export and import your Hot Keys library, or save it in HTML format to print it. Spark is free, so use it without moderation"
    http://www.versiontracker.com/dyn/moreinfo/macosx/22675

  • Function keys are not working correctly

    I've been looking all over the various threads and I can't find an answer that solves my problem.
    Here are the details:
    I bought the computer in the U.S. where I live.
    I have a iMac 2.4GHz intel Core 2 Duo  EMC 2133 with a 20" screen. Bought it new in February 2008.
    I have Mac OS X 10.5.8  (I am waiting for my order for OS Snow Leopard to come in!!)
    I have been using a wireless mouse and Keyboard (Love not having cords!)
    Recently, my wireless keyboard got a short and quit working. I went down to the apple store and got a new wireless keyboard.
    I had the computer with me at the genius bar so, yes, the apple employee saw exactly what I have.
    I took it all home got the thing all put back together and got the new keyboard paired up and working with the computer.
    Here are the problems:
    Went to go use the function keys while using iTunes and found they weren't working properly. The F10, F11 and F12 do not control the volume of sound as the keyboard indicates they would, they instead activate dashboard, spaces, and application windows. 
    Following the advice of other threads, I looked over in the system preferences and made sure the "Use all F1, F2 etc." box was unchecked (it was unchecked), things still didn't work.
    I tried the fn key but it appears to not work at all it has no effect on the functioning of the function keys.
    I went under keyboard shortcuts in system preferences and found the F10, F11 and F12 keys, it confirms that those keys control spaces, dashboard and application windows as they are performing but shows no options to either reassign to volume control (as marked on the keyboard) or make the fn key work.
    I've gone back and forth trying various combinations of checked and unchecked boxes to see if anything would work, so far I've come up with nothing.
    A couple more important or interesting facts:
    Yes I have turned off and taken the batteries out of the old keyboard. My bluetooth connection currently shows it as disconnected.
    I have restarted the computer.
    One thing I find odd; when I go under preferences and go to Keyboard and Mouse when I go under the section "Bluetooth" it shows Bluetooth mouse with the name of the mouse and the battery level. BUT nothing is showing up under bluetooth Keyboard, I can't figure out how to change this and don't know if it is contributing to the problem.
    When I go under the bluetooth logo on the top bar I find the mouse and both keyboards referenced, the old keyboard is shown as disconnected and the other two are connected. I have tried to update the device's name but it doesn't seem to let me.
    I have double clicked on the device under bluetooth and it shows the new keyboard as discoverable, paired and connected. Hence, I am using the new keyboard to write this inquiry.
    Please, any assistance would be of great help. I have tried to be thorough in order help narrow the possible problem. Thanks!!

    Hendry
    Just thought I'd let you know.  Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected.  I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800.  So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
    Roy
    Re: Function keys are not working correctly 

  • [Solved] Asus Zenbook Prime (UX31A-DB51) Function key issues

    I recently purchased this machine, and the final issue I have with is that the Function keys are not working. Looking at the wiki I saw that it should work out of the box with 3.4.4-2, and I'm on 3.4.5-1 and have issues with it. Following the instructions on building a patched module led to kernel panics.
    Thanks in advance for any help
    EDIT: dmesg output
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.4.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Mon Jul 16 21:35:54 CEST 2012
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/vols-vroot ro cryptdevice=/dev/sda3:encdev:allow-discards quiet add_efi_memmap elevator=noop
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
    [ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
    [ 0.000000] BIOS-e820: 0000000020200000 - 0000000040004000 (usable)
    [ 0.000000] BIOS-e820: 0000000040004000 - 0000000040005000 (reserved)
    [ 0.000000] BIOS-e820: 0000000040005000 - 00000000d97e5000 (usable)
    [ 0.000000] BIOS-e820: 00000000d97e5000 - 00000000d9de6000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000d9de6000 - 00000000d9de9000 (reserved)
    [ 0.000000] BIOS-e820: 00000000d9de9000 - 00000000d9dfe000 (usable)
    [ 0.000000] BIOS-e820: 00000000d9dfe000 - 00000000d9e04000 (reserved)
    [ 0.000000] BIOS-e820: 00000000d9e04000 - 00000000d9e06000 (usable)
    [ 0.000000] BIOS-e820: 00000000d9e06000 - 00000000d9e0b000 (reserved)
    [ 0.000000] BIOS-e820: 00000000d9e0b000 - 00000000d9f64000 (usable)
    [ 0.000000] BIOS-e820: 00000000d9f64000 - 00000000d9f68000 (reserved)
    [ 0.000000] BIOS-e820: 00000000d9f68000 - 00000000d9fa7000 (usable)
    [ 0.000000] BIOS-e820: 00000000d9fa7000 - 00000000d9fae000 (reserved)
    [ 0.000000] BIOS-e820: 00000000d9fae000 - 00000000d9fb0000 (usable)
    [ 0.000000] BIOS-e820: 00000000d9fb0000 - 00000000d9fce000 (reserved)
    [ 0.000000] BIOS-e820: 00000000d9fce000 - 00000000d9fd1000 (usable)
    [ 0.000000] BIOS-e820: 00000000d9fd1000 - 00000000d9fd3000 (reserved)
    [ 0.000000] BIOS-e820: 00000000d9fd3000 - 00000000d9fea000 (usable)
    [ 0.000000] BIOS-e820: 00000000d9fea000 - 00000000d9ff0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000d9ff0000 - 00000000d9ff8000 (usable)
    [ 0.000000] BIOS-e820: 00000000d9ff8000 - 00000000d9ff9000 (reserved)
    [ 0.000000] BIOS-e820: 00000000d9ff9000 - 00000000da008000 (usable)
    [ 0.000000] BIOS-e820: 00000000da008000 - 00000000da009000 (reserved)
    [ 0.000000] BIOS-e820: 00000000da009000 - 00000000da014000 (usable)
    [ 0.000000] BIOS-e820: 00000000da014000 - 00000000da019000 (reserved)
    [ 0.000000] BIOS-e820: 00000000da019000 - 00000000da037000 (usable)
    [ 0.000000] BIOS-e820: 00000000da037000 - 00000000da039000 (reserved)
    [ 0.000000] BIOS-e820: 00000000da039000 - 00000000da04d000 (usable)
    [ 0.000000] BIOS-e820: 00000000da04d000 - 00000000da04e000 (reserved)
    [ 0.000000] BIOS-e820: 00000000da04e000 - 00000000da060000 (usable)
    [ 0.000000] BIOS-e820: 00000000da060000 - 00000000da086000 (reserved)
    [ 0.000000] BIOS-e820: 00000000da086000 - 00000000da09a000 (usable)
    [ 0.000000] BIOS-e820: 00000000da09a000 - 00000000da09b000 (reserved)
    [ 0.000000] BIOS-e820: 00000000da09b000 - 00000000da09c000 (usable)
    [ 0.000000] BIOS-e820: 00000000da09c000 - 00000000da09e000 (reserved)
    [ 0.000000] BIOS-e820: 00000000da09e000 - 00000000da09f000 (usable)
    [ 0.000000] BIOS-e820: 00000000da09f000 - 00000000da0a4000 (reserved)
    [ 0.000000] BIOS-e820: 00000000da0a4000 - 00000000da0b9000 (usable)
    [ 0.000000] BIOS-e820: 00000000da0b9000 - 00000000da65d000 (reserved)
    [ 0.000000] BIOS-e820: 00000000da65d000 - 00000000da8dd000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000da8dd000 - 00000000da8e2000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000da8e2000 - 00000000da8e3000 (usable)
    [ 0.000000] BIOS-e820: 00000000da8e3000 - 00000000da926000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000da926000 - 00000000dad35000 (usable)
    [ 0.000000] BIOS-e820: 00000000dad35000 - 00000000daff4000 (reserved)
    [ 0.000000] BIOS-e820: 00000000daff4000 - 00000000db000000 (usable)
    [ 0.000000] BIOS-e820: 00000000dbc00000 - 00000000dfe00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 000000011f200000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] efi: EFI v2.31 by American Megatrends
    [ 0.000000] efi: ACPI=0xda8b0000 ACPI 2.0=0xda8b0000 SMBIOS=0xf04c0 MPS=0xfd4b0
    [ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
    [ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000005e000) (0MB)
    [ 0.000000] efi: mem02: type=4, attr=0xf, range=[0x000000000005e000-0x0000000000060000) (0MB)
    [ 0.000000] efi: mem03: type=3, attr=0xf, range=[0x0000000000060000-0x000000000009f000) (0MB)
    [ 0.000000] efi: mem04: type=6, attr=0x800000000000000f, range=[0x000000000009f000-0x00000000000a0000) (0MB)
    [ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000fc2000) (14MB)
    [ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000fc2000-0x0000000001000000) (0MB)
    [ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB)
    [ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000001100000-0x0000000002000000) (15MB)
    [ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000002000000-0x0000000002ec2000) (14MB)
    [ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000002ec2000-0x0000000020000000) (465MB)
    [ 0.000000] efi: mem11: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
    [ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000020200000-0x0000000037556000) (371MB)
    [ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x0000000037556000-0x0000000037aa3000) (5MB)
    [ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000037aa3000-0x0000000040004000) (133MB)
    [ 0.000000] efi: mem15: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
    [ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x0000000040005000-0x000000009accd000) (1452MB)
    [ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x000000009accd000-0x00000000ce792000) (826MB)
    [ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000ce792000-0x00000000ceac1000) (3MB)
    [ 0.000000] efi: mem19: type=7, attr=0xf, range=[0x00000000ceac1000-0x00000000ceac5000) (0MB)
    [ 0.000000] efi: mem20: type=4, attr=0xf, range=[0x00000000ceac5000-0x00000000ceace000) (0MB)
    [ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000ceace000-0x00000000ceb65000) (0MB)
    [ 0.000000] efi: mem22: type=1, attr=0xf, range=[0x00000000ceb65000-0x00000000ceb83000) (0MB)
    [ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000ceb83000-0x00000000ceba1000) (0MB)
    [ 0.000000] efi: mem24: type=4, attr=0xf, range=[0x00000000ceba1000-0x00000000cebf6000) (0MB)
    [ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000cebf6000-0x00000000cebfb000) (0MB)
    [ 0.000000] efi: mem26: type=4, attr=0xf, range=[0x00000000cebfb000-0x00000000ced71000) (1MB)
    [ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000ced71000-0x00000000ced79000) (0MB)
    [ 0.000000] efi: mem28: type=4, attr=0xf, range=[0x00000000ced79000-0x00000000d90f9000) (163MB)
    [ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x00000000d90f9000-0x00000000d97b2000) (6MB)
    [ 0.000000] efi: mem30: type=2, attr=0xf, range=[0x00000000d97b2000-0x00000000d97bb000) (0MB)
    [ 0.000000] efi: mem31: type=3, attr=0xf, range=[0x00000000d97bb000-0x00000000d97e5000) (0MB)
    [ 0.000000] efi: mem32: type=10, attr=0xf, range=[0x00000000d97e5000-0x00000000d9de6000) (6MB)
    [ 0.000000] efi: mem33: type=5, attr=0x800000000000000f, range=[0x00000000d9de6000-0x00000000d9de9000) (0MB)
    [ 0.000000] efi: mem34: type=3, attr=0xf, range=[0x00000000d9de9000-0x00000000d9dfe000) (0MB)
    [ 0.000000] efi: mem35: type=5, attr=0x800000000000000f, range=[0x00000000d9dfe000-0x00000000d9e04000) (0MB)
    [ 0.000000] efi: mem36: type=3, attr=0xf, range=[0x00000000d9e04000-0x00000000d9e06000) (0MB)
    [ 0.000000] efi: mem37: type=5, attr=0x800000000000000f, range=[0x00000000d9e06000-0x00000000d9e0b000) (0MB)
    [ 0.000000] efi: mem38: type=3, attr=0xf, range=[0x00000000d9e0b000-0x00000000d9f64000) (1MB)
    [ 0.000000] efi: mem39: type=5, attr=0x800000000000000f, range=[0x00000000d9f64000-0x00000000d9f68000) (0MB)
    [ 0.000000] efi: mem40: type=3, attr=0xf, range=[0x00000000d9f68000-0x00000000d9fa7000) (0MB)
    [ 0.000000] efi: mem41: type=5, attr=0x800000000000000f, range=[0x00000000d9fa7000-0x00000000d9fae000) (0MB)
    [ 0.000000] efi: mem42: type=3, attr=0xf, range=[0x00000000d9fae000-0x00000000d9fb0000) (0MB)
    [ 0.000000] efi: mem43: type=6, attr=0x800000000000000f, range=[0x00000000d9fb0000-0x00000000d9fbd000) (0MB)
    [ 0.000000] efi: mem44: type=5, attr=0x800000000000000f, range=[0x00000000d9fbd000-0x00000000d9fce000) (0MB)
    [ 0.000000] efi: mem45: type=3, attr=0xf, range=[0x00000000d9fce000-0x00000000d9fd1000) (0MB)
    [ 0.000000] efi: mem46: type=5, attr=0x800000000000000f, range=[0x00000000d9fd1000-0x00000000d9fd3000) (0MB)
    [ 0.000000] efi: mem47: type=3, attr=0xf, range=[0x00000000d9fd3000-0x00000000d9fea000) (0MB)
    [ 0.000000] efi: mem48: type=5, attr=0x800000000000000f, range=[0x00000000d9fea000-0x00000000d9ff0000) (0MB)
    [ 0.000000] efi: mem49: type=3, attr=0xf, range=[0x00000000d9ff0000-0x00000000d9ff8000) (0MB)
    [ 0.000000] efi: mem50: type=5, attr=0x800000000000000f, range=[0x00000000d9ff8000-0x00000000d9ff9000) (0MB)
    [ 0.000000] efi: mem51: type=3, attr=0xf, range=[0x00000000d9ff9000-0x00000000da008000) (0MB)
    [ 0.000000] efi: mem52: type=5, attr=0x800000000000000f, range=[0x00000000da008000-0x00000000da009000) (0MB)
    [ 0.000000] efi: mem53: type=3, attr=0xf, range=[0x00000000da009000-0x00000000da014000) (0MB)
    [ 0.000000] efi: mem54: type=5, attr=0x800000000000000f, range=[0x00000000da014000-0x00000000da019000) (0MB)
    [ 0.000000] efi: mem55: type=3, attr=0xf, range=[0x00000000da019000-0x00000000da037000) (0MB)
    [ 0.000000] efi: mem56: type=5, attr=0x800000000000000f, range=[0x00000000da037000-0x00000000da039000) (0MB)
    [ 0.000000] efi: mem57: type=3, attr=0xf, range=[0x00000000da039000-0x00000000da04d000) (0MB)
    [ 0.000000] efi: mem58: type=5, attr=0x800000000000000f, range=[0x00000000da04d000-0x00000000da04e000) (0MB)
    [ 0.000000] efi: mem59: type=3, attr=0xf, range=[0x00000000da04e000-0x00000000da060000) (0MB)
    [ 0.000000] efi: mem60: type=5, attr=0x800000000000000f, range=[0x00000000da060000-0x00000000da086000) (0MB)
    [ 0.000000] efi: mem61: type=3, attr=0xf, range=[0x00000000da086000-0x00000000da09a000) (0MB)
    [ 0.000000] efi: mem62: type=5, attr=0x800000000000000f, range=[0x00000000da09a000-0x00000000da09b000) (0MB)
    [ 0.000000] efi: mem63: type=3, attr=0xf, range=[0x00000000da09b000-0x00000000da09c000) (0MB)
    [ 0.000000] efi: mem64: type=5, attr=0x800000000000000f, range=[0x00000000da09c000-0x00000000da09e000) (0MB)
    [ 0.000000] efi: mem65: type=3, attr=0xf, range=[0x00000000da09e000-0x00000000da09f000) (0MB)
    [ 0.000000] efi: mem66: type=5, attr=0x800000000000000f, range=[0x00000000da09f000-0x00000000da0a4000) (0MB)
    [ 0.000000] efi: mem67: type=3, attr=0xf, range=[0x00000000da0a4000-0x00000000da0b9000) (0MB)
    [ 0.000000] efi: mem68: type=6, attr=0x800000000000000f, range=[0x00000000da0b9000-0x00000000da119000) (0MB)
    [ 0.000000] efi: mem69: type=5, attr=0x800000000000000f, range=[0x00000000da119000-0x00000000da133000) (0MB)
    [ 0.000000] efi: mem70: type=6, attr=0x800000000000000f, range=[0x00000000da133000-0x00000000da139000) (0MB)
    [ 0.000000] efi: mem71: type=6, attr=0x800000000000000f, range=[0x00000000da139000-0x00000000da13e000) (0MB)
    [ 0.000000] efi: mem72: type=6, attr=0x800000000000000f, range=[0x00000000da13e000-0x00000000da140000) (0MB)
    [ 0.000000] efi: mem73: type=6, attr=0x800000000000000f, range=[0x00000000da140000-0x00000000da15d000) (0MB)
    [ 0.000000] efi: mem74: type=0, attr=0xf, range=[0x00000000da15d000-0x00000000da28c000) (1MB)
    [ 0.000000] efi: mem75: type=0, attr=0xf, range=[0x00000000da28c000-0x00000000da5f2000) (3MB)
    [ 0.000000] efi: mem76: type=0, attr=0xf, range=[0x00000000da5f2000-0x00000000da5f8000) (0MB)
    [ 0.000000] efi: mem77: type=0, attr=0xf, range=[0x00000000da5f8000-0x00000000da65d000) (0MB)
    [ 0.000000] efi: mem78: type=10, attr=0xf, range=[0x00000000da65d000-0x00000000da72b000) (0MB)
    [ 0.000000] efi: mem79: type=10, attr=0xf, range=[0x00000000da72b000-0x00000000da8c7000) (1MB)
    [ 0.000000] efi: mem80: type=10, attr=0xf, range=[0x00000000da8c7000-0x00000000da8c9000) (0MB)
    [ 0.000000] efi: mem81: type=10, attr=0xf, range=[0x00000000da8c9000-0x00000000da8dd000) (0MB)
    [ 0.000000] efi: mem82: type=9, attr=0xf, range=[0x00000000da8dd000-0x00000000da8e1000) (0MB)
    [ 0.000000] efi: mem83: type=9, attr=0xf, range=[0x00000000da8e1000-0x00000000da8e2000) (0MB)
    [ 0.000000] efi: mem84: type=4, attr=0xf, range=[0x00000000da8e2000-0x00000000da8e3000) (0MB)
    [ 0.000000] efi: mem85: type=10, attr=0xf, range=[0x00000000da8e3000-0x00000000da926000) (0MB)
    [ 0.000000] efi: mem86: type=4, attr=0xf, range=[0x00000000da926000-0x00000000daa70000) (1MB)
    [ 0.000000] efi: mem87: type=3, attr=0xf, range=[0x00000000daa70000-0x00000000dad06000) (2MB)
    [ 0.000000] efi: mem88: type=4, attr=0xf, range=[0x00000000dad06000-0x00000000dad0b000) (0MB)
    [ 0.000000] efi: mem89: type=3, attr=0xf, range=[0x00000000dad0b000-0x00000000dad0f000) (0MB)
    [ 0.000000] efi: mem90: type=4, attr=0xf, range=[0x00000000dad0f000-0x00000000dad1c000) (0MB)
    [ 0.000000] efi: mem91: type=3, attr=0xf, range=[0x00000000dad1c000-0x00000000dad2e000) (0MB)
    [ 0.000000] efi: mem92: type=4, attr=0xf, range=[0x00000000dad2e000-0x00000000dad35000) (0MB)
    [ 0.000000] efi: mem93: type=6, attr=0x800000000000000f, range=[0x00000000dad35000-0x00000000daff4000) (2MB)
    [ 0.000000] efi: mem94: type=4, attr=0xf, range=[0x00000000daff4000-0x00000000db000000) (0MB)
    [ 0.000000] efi: mem95: type=7, attr=0xf, range=[0x0000000100000000-0x000000011f200000) (498MB)
    [ 0.000000] efi: mem96: type=0, attr=0x8000000000000000, range=[0x00000000dbc00000-0x00000000dfe00000) (66MB)
    [ 0.000000] efi: mem97: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
    [ 0.000000] efi: mem98: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
    [ 0.000000] efi: mem99: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
    [ 0.000000] efi: mem100: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
    [ 0.000000] efi: mem101: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
    [ 0.000000] efi: mem102: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
    [ 0.000000] DMI 2.7 present.
    [ 0.000000] DMI: ASUSTeK COMPUTER INC. UX31A/UX31A, BIOS UX31A.204 05/09/2012
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x11f200 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-DFFFF uncachable
    [ 0.000000] E0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F00000000 write-back
    [ 0.000000] 1 base 100000000 mask FE0000000 write-back
    [ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
    [ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 0DBC00000 mask FFFC00000 uncachable
    [ 0.000000] 5 base 11F800000 mask FFF800000 uncachable
    [ 0.000000] 6 base 11F400000 mask FFFC00000 uncachable
    [ 0.000000] 7 base 11F200000 mask FFFE00000 uncachable
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820 update range: 00000000dbc00000 - 0000000100000000 (usable) ==> (reserved)
    [ 0.000000] last_pfn = 0xdb000 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [ffff8800000fd780] fd780
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000db000000
    [ 0.000000] 0000000000 - 00db000000 page 2M
    [ 0.000000] kernel direct mapping tables up to db000000 @ 1fffb000-20000000
    [ 0.000000] init_memory_mapping: 0000000100000000-000000011f200000
    [ 0.000000] 0100000000 - 011f200000 page 2M
    [ 0.000000] kernel direct mapping tables up to 11f200000 @ d97b5000-d97bb000
    [ 0.000000] RAMDISK: 37556000 - 37aa3000
    [ 0.000000] ACPI: RSDP 00000000da8b0000 00024 (v02 _ASUS_)
    [ 0.000000] ACPI: XSDT 00000000da8b0090 0009C (v01 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 00000000da8c2058 000F4 (v04 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 00000000da8b01c0 11E96 (v02 _ASUS_ Notebook 00000013 INTL 20091112)
    [ 0.000000] ACPI: FACS 00000000da8daf80 00040
    [ 0.000000] ACPI: APIC 00000000da8c2150 00072 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: FPDT 00000000da8c21c8 00044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: ECDT 00000000da8c2210 000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
    [ 0.000000] ACPI: MCFG 00000000da8c22d8 0003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
    [ 0.000000] ACPI: SSDT 00000000da8c2318 00A3C (v01 DptfTa DptfTab 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000da8c2d58 00CA5 (v01 SADptf SADptf_ 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000da8c3a00 00098 (v01 PchDpt PchDptf 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000da8c3a98 0091C (v01 CfgTDP CfgTDP_ 00001000 INTL 20091112)
    [ 0.000000] ACPI: SLIC 00000000da8c43b8 00176 (v01 _ASUS_ Notebook 01072009 ASUS 00000001)
    [ 0.000000] ACPI: HPET 00000000da8c4530 00038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 00000000da8c4568 00886 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.000000] ACPI: SSDT 00000000da8c4df0 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: DMAR 00000000da8c5888 000B8 (v01 INTEL SNB 00000001 INTL 00000001)
    [ 0.000000] ACPI: BGRT 00000000da8c5940 00038 (v00 _ASUS_ Notebook 01072009 ASUS 00010013)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-000000011f200000
    [ 0.000000] Initmem setup node 0 0000000000000000-000000011f200000
    [ 0.000000] NODE_DATA [000000011f1fc000 - 000000011f1fffff]
    [ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011a800000-ffff88011e7fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x0011f200
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x00020000
    [ 0.000000] 0: 0x00020200 -> 0x00040004
    [ 0.000000] 0: 0x00040005 -> 0x000d97e5
    [ 0.000000] 0: 0x000d9de9 -> 0x000d9dfe
    [ 0.000000] 0: 0x000d9e04 -> 0x000d9e06
    [ 0.000000] 0: 0x000d9e0b -> 0x000d9f64
    [ 0.000000] 0: 0x000d9f68 -> 0x000d9fa7
    [ 0.000000] 0: 0x000d9fae -> 0x000d9fb0
    [ 0.000000] 0: 0x000d9fce -> 0x000d9fd1
    [ 0.000000] 0: 0x000d9fd3 -> 0x000d9fea
    [ 0.000000] 0: 0x000d9ff0 -> 0x000d9ff8
    [ 0.000000] 0: 0x000d9ff9 -> 0x000da008
    [ 0.000000] 0: 0x000da009 -> 0x000da014
    [ 0.000000] 0: 0x000da019 -> 0x000da037
    [ 0.000000] 0: 0x000da039 -> 0x000da04d
    [ 0.000000] 0: 0x000da04e -> 0x000da060
    [ 0.000000] 0: 0x000da086 -> 0x000da09a
    [ 0.000000] 0: 0x000da09b -> 0x000da09c
    [ 0.000000] 0: 0x000da09e -> 0x000da09f
    [ 0.000000] 0: 0x000da0a4 -> 0x000da0b9
    [ 0.000000] 0: 0x000da8e2 -> 0x000da8e3
    [ 0.000000] 0: 0x000da926 -> 0x000dad35
    [ 0.000000] 0: 0x000daff4 -> 0x000db000
    [ 0.000000] 0: 0x00100000 -> 0x0011f200
    [ 0.000000] On node 0 totalpages: 1019371
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 11 pages reserved
    [ 0.000000] DMA zone: 3908 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 871580 pages, LIFO batch:31
    [ 0.000000] Normal zone: 1992 pages used for memmap
    [ 0.000000] Normal zone: 125496 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
    [ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
    [ 0.000000] PM: Registered nosave memory: 00000000d97e5000 - 00000000d9de6000
    [ 0.000000] PM: Registered nosave memory: 00000000d9de6000 - 00000000d9de9000
    [ 0.000000] PM: Registered nosave memory: 00000000d9dfe000 - 00000000d9e04000
    [ 0.000000] PM: Registered nosave memory: 00000000d9e06000 - 00000000d9e0b000
    [ 0.000000] PM: Registered nosave memory: 00000000d9f64000 - 00000000d9f68000
    [ 0.000000] PM: Registered nosave memory: 00000000d9fa7000 - 00000000d9fae000
    [ 0.000000] PM: Registered nosave memory: 00000000d9fb0000 - 00000000d9fce000
    [ 0.000000] PM: Registered nosave memory: 00000000d9fd1000 - 00000000d9fd3000
    [ 0.000000] PM: Registered nosave memory: 00000000d9fea000 - 00000000d9ff0000
    [ 0.000000] PM: Registered nosave memory: 00000000d9ff8000 - 00000000d9ff9000
    [ 0.000000] PM: Registered nosave memory: 00000000da008000 - 00000000da009000
    [ 0.000000] PM: Registered nosave memory: 00000000da014000 - 00000000da019000
    [ 0.000000] PM: Registered nosave memory: 00000000da037000 - 00000000da039000
    [ 0.000000] PM: Registered nosave memory: 00000000da04d000 - 00000000da04e000
    [ 0.000000] PM: Registered nosave memory: 00000000da060000 - 00000000da086000
    [ 0.000000] PM: Registered nosave memory: 00000000da09a000 - 00000000da09b000
    [ 0.000000] PM: Registered nosave memory: 00000000da09c000 - 00000000da09e000
    [ 0.000000] PM: Registered nosave memory: 00000000da09f000 - 00000000da0a4000
    [ 0.000000] PM: Registered nosave memory: 00000000da0b9000 - 00000000da65d000
    [ 0.000000] PM: Registered nosave memory: 00000000da65d000 - 00000000da8dd000
    [ 0.000000] PM: Registered nosave memory: 00000000da8dd000 - 00000000da8e2000
    [ 0.000000] PM: Registered nosave memory: 00000000da8e3000 - 00000000da926000
    [ 0.000000] PM: Registered nosave memory: 00000000dad35000 - 00000000daff4000
    [ 0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000dbc00000
    [ 0.000000] PM: Registered nosave memory: 00000000dbc00000 - 00000000dfe00000
    [ 0.000000] PM: Registered nosave memory: 00000000dfe00000 - 00000000f8000000
    [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
    [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
    [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
    [ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
    [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
    [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
    [ 0.000000] Allocating PCI resources starting at dfe00000 (gap: dfe00000:18200000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011ee00000 s82880 r8192 d23616 u524288
    [ 0.000000] pcpu-alloc: s82880 r8192 d23616 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1000984
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/vols-vroot ro cryptdevice=/dev/sda3:encdev:allow-discards quiet add_efi_memmap elevator=noop
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3749436k/4704256k available (4538k kernel code, 626772k absent, 328048k reserved, 4308k data, 740k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.003333] Detected 1696.065 MHz processor.
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3393.46 BogoMIPS (lpj=5653550)
    [ 0.000007] pid_max: default: 32768 minimum: 301
    [ 0.000027] init_memory_mapping: 00000000dbc00000-00000000dfe00000
    [ 0.000031] 00dbc00000 - 00dfe00000 page 2M
    [ 0.151052] Security Framework initialized
    [ 0.151060] AppArmor: AppArmor disabled by boot time parameter
    [ 0.151411] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.152933] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.153609] Mount-cache hash table entries: 256
    [ 0.153820] Initializing cgroup subsys cpuacct
    [ 0.153823] Initializing cgroup subsys memory
    [ 0.153832] Initializing cgroup subsys devices
    [ 0.153834] Initializing cgroup subsys freezer
    [ 0.153836] Initializing cgroup subsys net_cls
    [ 0.153838] Initializing cgroup subsys blkio
    [ 0.153874] CPU: Physical Processor ID: 0
    [ 0.153875] CPU: Processor Core ID: 0
    [ 0.153882] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    [ 0.153883] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.154440] mce: CPU supports 7 MCE banks
    [ 0.154456] CPU0: Thermal monitoring enabled (TM1)
    [ 0.154464] using mwait in idle threads.
    [ 0.155854] ACPI: Core revision 20120320
    [ 0.172956] ftrace: allocating 17824 entries in 70 pages
    [ 0.186631] DMAR: Host address width 36
    [ 0.186634] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
    [ 0.186647] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
    [ 0.186650] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
    [ 0.186661] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
    [ 0.186663] DMAR: RMRR base: 0x000000da3af000 end: 0x000000da3cbfff
    [ 0.186666] DMAR: RMRR base: 0x000000dbc00000 end: 0x000000dfdfffff
    [ 0.186743] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
    [ 0.186745] HPET id 0 under DRHD base 0xfed91000
    [ 0.186954] Enabled IRQ remapping in x2apic mode
    [ 0.186956] Enabling x2apic
    [ 0.186958] Enabled x2apic
    [ 0.186967] Switched APIC routing to cluster x2apic.
    [ 0.187451] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.220416] CPU0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz stepping 09
    [ 0.324902] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
    [ 0.324909] ... version: 3
    [ 0.324910] ... bit width: 48
    [ 0.324912] ... generic registers: 4
    [ 0.324914] ... value mask: 0000ffffffffffff
    [ 0.324916] ... max period: 000000007fffffff
    [ 0.324917] ... fixed-purpose events: 3
    [ 0.324919] ... event mask: 000000070000000f
    [ 0.344968] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.364889] Booting Node 0, Processors #1
    [ 0.378630] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.391536] #2
    [ 0.405332] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.418168] #3 Ok.
    [ 0.431901] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.431937] Brought up 4 CPUs
    [ 0.431939] Total of 4 processors activated (13573.87 BogoMIPS).
    [ 0.436493] devtmpfs: initialized
    [ 0.437768] PM: Registering ACPI NVS region [mem 0xd97e5000-0xd9de5fff] (6295552 bytes)
    [ 0.437873] PM: Registering ACPI NVS region [mem 0xda65d000-0xda8dcfff] (2621440 bytes)
    [ 0.437918] PM: Registering ACPI NVS region [mem 0xda8e3000-0xda925fff] (274432 bytes)
    [ 0.438826] NET: Registered protocol family 16
    [ 0.438966] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.438969] ACPI: bus type pci registered
    [ 0.439040] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.439044] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.488460] PCI: Using configuration type 1 for base access
    [ 0.489097] bio: create slab <bio-0> at 0
    [ 0.489161] ACPI: Added _OSI(Module Device)
    [ 0.489163] ACPI: Added _OSI(Processor Device)
    [ 0.489165] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.489168] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.492211] ACPI: EC: EC description table is found, configuring boot EC
    [ 0.495384] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.500091] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.500635] ACPI: SSDT 00000000da60a018 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.501405] ACPI: Dynamic OEM Table Load:
    [ 0.501409] ACPI: SSDT (null) 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.501770] ACPI: SSDT 00000000da60ba98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.502576] ACPI: Dynamic OEM Table Load:
    [ 0.502579] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.502752] ACPI: SSDT 00000000da60cc18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.503510] ACPI: Dynamic OEM Table Load:
    [ 0.503513] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.504368] ACPI: Interpreter enabled
    [ 0.504373] ACPI: (supports S0 S3 S4 S5)
    [ 0.504406] ACPI: Using IOAPIC for interrupt routing
    [ 0.512510] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
    [ 0.512789] ACPI: No dock devices found.
    [ 0.512794] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.513213] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.513809] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.513812] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.513815] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.513818] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    [ 0.513821] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    [ 0.513823] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    [ 0.513826] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
    [ 0.513829] pci_root PNP0A08:00: host bridge window [mem 0xdfe00000-0xfeafffff]
    [ 0.513867] PCI host bridge to bus 0000:00
    [ 0.513870] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.513873] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.513875] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.513878] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.513880] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.513883] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.513885] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.513888] pci_bus 0000:00: root bus resource [mem 0xdfe00000-0xfeafffff]
    [ 0.513899] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    [ 0.513952] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
    [ 0.513968] pci 0000:00:02.0: reg 10: [mem 0xf7800000-0xf7bfffff 64bit]
    [ 0.513977] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.513985] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
    [ 0.514032] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
    [ 0.514046] pci 0000:00:04.0: reg 10: [mem 0xfed98000-0xfed9ffff 64bit]
    [ 0.514135] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 0.514163] pci 0000:00:14.0: reg 10: [mem 0xf7d00000-0xf7d0ffff 64bit]
    [ 0.514257] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.514289] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 0.514320] pci 0000:00:16.0: reg 10: [mem 0xf7d22000-0xf7d2200f 64bit]
    [ 0.514413] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.514463] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 0.514489] pci 0000:00:1a.0: reg 10: [mem 0xf7d20000-0xf7d203ff]
    [ 0.514599] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.514632] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 0.514654] pci 0000:00:1b.0: reg 10: [mem 0xf7d18000-0xf7d1bfff 64bit]
    [ 0.514739] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.514775] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
    [ 0.514909] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.514948] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
    [ 0.515082] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.515141] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 0.515168] pci 0000:00:1d.0: reg 10: [mem 0xf7d1f000-0xf7d1f3ff]
    [ 0.515282] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.515316] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
    [ 0.515466] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
    [ 0.515490] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
    [ 0.515500] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
    [ 0.515512] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
    [ 0.515522] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
    [ 0.515532] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
    [ 0.515542] pci 0000:00:1f.2: reg 24: [mem 0xf7d1e000-0xf7d1e7ff]
    [ 0.515605] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.515629] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 0.515651] pci 0000:00:1f.3: reg 10: [mem 0xf7d1d000-0xf7d1d0ff 64bit]
    [ 0.515682] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
    [ 0.515732] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
    [ 0.515758] pci 0000:00:1f.6: reg 10: [mem 0xf7d1c000-0xf7d1cfff 64bit]
    [ 0.515922] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
    [ 0.516173] pci 0000:02:00.0: [8086:088e] type 00 class 0x028000
    [ 0.516366] pci 0000:02:00.0: reg 10: [mem 0xf7c00000-0xf7c01fff 64bit]
    [ 0.517198] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 0.521918] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
    [ 0.521928] pci 0000:00:1c.1: bridge window [mem 0xf7c00000-0xf7cfffff]
    [ 0.521957] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.522122] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.522161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 0.522339] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.522604] pci0000:00: ACPI _OSC control (0x18) granted
    [ 0.528361] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
    [ 0.528420] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 12)
    [ 0.528480] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12)
    [ 0.528531] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12)
    [ 0.528584] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 0.528635] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 0.528687] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
    [ 0.528737] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12)
    [ 0.528831] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.528838] vgaarb: loaded
    [ 0.528839] vgaarb: bridge control possible 0000:00:02.0
    [ 0.528883] PCI: Using ACPI for IRQ routing
    [ 0.530787] PCI: pci_cache_line_size set to 64 bytes
    [ 0.530797] pci 0000:00:04.0: no compatible bridge window for [mem 0xfed98000-0xfed9ffff 64bit]
    [ 0.530873] reserve RAM buffer: 000000000009f000 - 000000000009ffff
    [ 0.530876] reserve RAM buffer: 0000000040004000 - 0000000043ffffff
    [ 0.530879] reserve RAM buffer: 00000000d97e5000 - 00000000dbffffff
    [ 0.530891] reserve RAM buffer: 00000000d9dfe000 - 00000000dbffffff
    [ 0.530903] reserve RAM buffer: 00000000d9e06000 - 00000000dbffffff
    [ 0.530914] reserve RAM buffer: 00000000d9f64000 - 00000000dbffffff
    [ 0.530925] reserve RAM buffer: 00000000d9fa7000 - 00000000dbffffff
    [ 0.530936] reserve RAM buffer: 00000000d9fb0000 - 00000000dbffffff
    [ 0.530946] reserve RAM buffer: 00000000d9fd1000 - 00000000dbffffff
    [ 0.530956] reserve RAM buffer: 00000000d9fea000 - 00000000dbffffff
    [ 0.530966] reserve RAM buffer: 00000000d9ff8000 - 00000000dbffffff
    [ 0.530975] reserve RAM buffer: 00000000da008000 - 00000000dbffffff
    [ 0.530984] reserve RAM buffer: 00000000da014000 - 00000000dbffffff
    [ 0.530993] reserve RAM buffer: 00000000da037000 - 00000000dbffffff
    [ 0.531001] reserve RAM buffer: 00000000da04d000 - 00000000dbffffff
    [ 0.531008] reserve RAM buffer: 00000000da060000 - 00000000dbffffff
    [ 0.531015] reserve RAM buffer: 00000000da09a000 - 00000000dbffffff
    [ 0.531022] reserve RAM buffer: 00000000da09c000 - 00000000dbffffff
    [ 0.531028] reserve RAM buffer: 00000000da09f000 - 00000000dbffffff
    [ 0.531033] reserve RAM buffer: 00000000da0b9000 - 00000000dbffffff
    [ 0.531038] reserve RAM buffer: 00000000da8e3000 - 00000000dbffffff
    [ 0.531042] reserve RAM buffer: 00000000dad35000 - 00000000dbffffff
    [ 0.531045] reserve RAM buffer: 00000000db000000 - 00000000dbffffff
    [ 0.531048] reserve RAM buffer: 000000011f200000 - 000000011fffffff
    [ 0.531151] NetLabel: Initializing
    [ 0.531153] NetLabel: domain hash size = 128
    [ 0.531155] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.531169] NetLabel: unlabeled traffic allowed by default
    [ 0.531194] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.531202] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.533219] Switching to clocksource hpet
    [ 0.539356] pnp: PnP ACPI init
    [ 0.539371] ACPI: bus type pnp registered
    [ 0.539727] pnp 00:00: [bus 00-3e]
    [ 0.539735] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.539737] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.539739] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.539742] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.539744] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 0.539747] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 0.539749] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 0.539751] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 0.539754] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 0.539756] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 0.539759] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 0.539761] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 0.539763] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 0.539766] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 0.539768] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 0.539770] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 0.539773] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 0.539775] pnp 00:00: [mem 0xdfe00000-0xfeafffff window]
    [ 0.539777] pnp 00:00: [mem 0x00010000-0x0001ffff window]
    [ 0.539852] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.539883] pnp 00:01: [mem 0xfed40000-0xfed44fff]
    [ 0.539934] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.539938] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.540008] pnp 00:02: [io 0x0000-0x001f]
    [ 0.540010] pnp 00:02: [io 0x0081-0x0091]
    [ 0.540012] pnp 00:02: [io 0x0093-0x009f]
    [ 0.540014] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.540016] pnp 00:02: [dma 4]
    [ 0.540049] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.540058] pnp 00:03: [mem 0xff000000-0xffffffff]
    [ 0.540087] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.540186] pnp 00:04: [mem 0xfed00000-0xfed003ff]
    [ 0.540219] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.540233] pnp 00:05: [io 0x002e-0x002f]
    [ 0.540235] pnp 00:05: [io 0x004e-0x004f]
    [ 0.540237] pnp 00:05: [io 0x0061]
    [ 0.540239] pnp 00:05: [io 0x0063]
    [ 0.540241] pnp 00:05: [io 0x0065]
    [ 0.540243] pnp 00:05: [io 0x0067]
    [ 0.540245] pnp 00:05: [io 0x0070]
    [ 0.540246] pnp 00:05: [io 0x0080]
    [ 0.540248] pnp 00:05: [io 0x0092]
    [ 0.540250] pnp 00:05: [io 0x00b2-0x00b3]
    [ 0.540252] pnp 00:05: [io 0x0680-0x069f]
    [ 0.540254] pnp 00:05: [io 0x0200-0x020f]
    [ 0.540256] pnp 00:05: [io 0xffff]
    [ 0.540258] pnp 00:05: [io 0xffff]
    [ 0.540260] pnp 00:05: [io 0x0400-0x0453]
    [ 0.540264] pnp 00:05: [io 0x0458-0x047f]
    [ 0.540266] pnp 00:05: [io 0x0500-0x057f]
    [ 0.540268] pnp 00:05: [io 0x164e-0x164f]
    [ 0.540315] system 00:05: [io 0x0680-0x069f] has been reserved
    [ 0.540318] system 00:05: [io 0x0200-0x020f] has been reserved
    [ 0.540320] system 00:05: [io 0xffff] has been reserved
    [ 0.540323] system 00:05: [io 0xffff] has been reserved
    [ 0.540326] system 00:05: [io 0x0400-0x0453] has been reserved
    [ 0.540328] system 00:05: [io 0x0458-0x047f] has been reserved
    [ 0.540331] system 00:05: [io 0x0500-0x057f] has been reserved
    [ 0.540334] system 00:05: [io 0x164e-0x164f] has been reserved
    [ 0.540338] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.540348] pnp 00:06: [io 0x0070-0x0077]
    [ 0.540362] pnp 00:06: [irq 8]
    [ 0.540395] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.540427] pnp 00:07: [io 0x0454-0x0457]
    [ 0.540471] system 00:07: [io 0x0454-0x0457] has been reserved
    [ 0.540474] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.540502] pnp 00:08: [io 0x0010-0x001f]
    [ 0.540504] pnp 00:08: [io 0x0022-0x003f]
    [ 0.540506] pnp 00:08: [io 0x0044-0x005f]
    [ 0.540508] pnp 00:08: [io 0x0072-0x007f]
    [ 0.540510] pnp 00:08: [io 0x0080]
    [ 0.540512] pnp 00:08: [io 0x0084-0x0086]
    [ 0.540514] pnp 00:08: [io 0x0088]
    [ 0.540516] pnp 00:08: [io 0x008c-0x008e]
    [ 0.540518] pnp 00:08: [io 0x0090-0x009f]
    [ 0.540520] pnp 00:08: [io 0x00a2-0x00bf]
    [ 0.540522] pnp 00:08: [io 0x00e0-0x00ef]
    [ 0.540524] pnp 00:08: [io 0x04d0-0x04d1]
    [ 0.540571] system 00:08: [io 0x04d0-0x04d1] has been reserved
    [ 0.540575] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.540584] pnp 00:09: [io 0x00f0-0x00ff]
    [ 0.540593] pnp 00:09: [irq 13]
    [ 0.540627] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.540680] pnp 00:0a: [irq 12]
    [ 0.540716] pnp 00:0a: Plug and Play ACPI device, IDs ETD0105 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
    [ 0.540743] pnp 00:0b: [io 0x0060]
    [ 0.540745] pnp 00:0b: [io 0x0064]
    [ 0.540752] pnp 00:0b: [irq 1]
    [ 0.540788] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.541018] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
    [ 0.541020] pnp 00:0c: [mem 0xfed10000-0xfed17fff]
    [ 0.541022] pnp 00:0c: [mem 0xfed18000-0xfed18fff]
    [ 0.541024] pnp 00:0c: [mem 0xfed19000-0xfed19fff]
    [ 0.541027] pnp 00:0c: [mem 0xf8000000-0xfbffffff]
    [ 0.541029] pnp 00:0c: [mem 0xfed20000-0xfed3ffff]
    [ 0.541031] pnp 00:0c: [mem 0xfed90000-0xfed93fff]
    [ 0.541033] pnp 00:0c: [mem 0xfed45000-0xfed8ffff]
    [ 0.541035] pnp 00:0c: [mem 0xff000000-0xffffffff]
    [ 0.541038] pnp 00:0c: [mem 0xfee00000-0xfeefffff]
    [ 0.541040] pnp 00:0c: [mem 0xdfe00000-0xdfe00fff]
    [ 0.541103] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.541106] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.541109] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.541112] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.541116] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.541119] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.541122] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.541125] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.541128] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.541131] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.541134] system 00:0c: [mem 0xdfe00000-0xdfe00fff] has been reserved
    [ 0.541138] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.541211] pnp 00:0d: [mem 0xdfe00000-0xdfe00fff]
    [ 0.541274] system 00:0d: [mem 0xdfe00000-0xdfe00fff] has been reserved
    [ 0.541278] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.541430] pnp 00:0e: [mem 0x20000000-0x201fffff]
    [ 0.541433] pnp 00:0e: [mem 0x40004000-0x40004fff]
    [ 0.541495] system 00:0e: [mem 0x20000000-0x201fffff] has been reserved
    [ 0.541497] system 00:0e: [mem 0x40004000-0x40004fff] has been reserved
    [ 0.541501] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.541534] pnp: PnP ACPI: found 15 devices
    [ 0.541536] ACPI: ACPI bus type pnp unregistered
    [ 0.548333] pci 0000:00:04.0: BAR 0: assigned [mem 0xdfe08000-0xdfe0ffff 64bit]
    [ 0.548340] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
    [ 0.548357] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
    [ 0.548364] pci 0000:00:1c.1: bridge window [mem 0xf7c00000-0xf7cfffff]
    [ 0.548408] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.548411] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.548413] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.548416] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 0.548418] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 0.548421] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 0.548424] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    [ 0.548426] pci_bus 0000:00: resource 11 [mem 0xdfe00000-0xfeafffff]
    [ 0.548429] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
    [ 0.548474] NET: Registered protocol family 2
    [ 0.548608] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.549403] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.550900] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.551049] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.551052] TCP: reno registered
    [ 0.551067] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.551086] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.551175] NET: Registered protocol family 1
    [ 0.551191] pci 0000:00:02.0: Boot video device
    [ 0.586597] PCI: CLS 64 bytes, default 64
    [ 0.586642] Unpacking initramfs...
    [ 0.718182] Freeing initrd memory: 5428k freed
    [ 0.718943] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.718947] Placing 64MB software IO TLB between ffff8800ca792000 - ffff8800ce792000
    [ 0.718950] software IO TLB at phys 0xca792000 - 0xce792000
    [ 0.719520] audit: initializing netlink socket (disabled)
    [ 0.719531] type=2000 audit(1342675392.609:1): initialized
    [ 0.719886] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.721809] VFS: Disk quotas dquot_6.5.2
    [ 0.721861] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.721987] msgmni has been set to 7684
    [ 0.722183] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.722218] io scheduler noop registered (default)
    [ 0.722221] io scheduler deadline registered
    [ 0.722279] io scheduler cfq registered
    [ 0.722575] efifb: probing for efifb
    [ 0.725055] efifb: framebuffer at 0xe0000000, mapped to 0xffffc9000a200000, using 3072k, total 3072k
    [ 0.725058] efifb: mode is 1024x768x32, linelength=4096, pages=1
    [ 0.725060] efifb: scrolling: redraw
    [ 0.725063] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.727405] Console: switching to colour frame buffer device 128x48
    [ 0.729621] fb0: EFI VGA frame buffer device
    [ 0.729628] intel_idle: does not run on family 6 model 58
    [ 0.729660] GHES: HEST is not enabled!
    [ 0.729740] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.730316] Linux agpgart interface v0.103
    [ 0.730401] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [ 0.732007] i8042: Detected active multiplexing controller, rev 1.1
    [ 0.732785] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.732815] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 0.732839] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 0.732863] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 0.732884] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 0.732989] mousedev: PS/2 mouse device common for all mice
    [ 0.733073] rtc_cmos 00:06: RTC can wake from S4
    [ 0.733238] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [ 0.733268] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.733278] cpuidle: using governor ladder
    [ 0.733280] cpuidle: using governor menu
    [ 0.733411] TCP: cubic registered
    [ 0.733520] NET: Registered protocol family 10
    [ 0.733728] NET: Registered protocol family 17
    [ 0.733733] Registering the dns_resolver key type
    [ 0.733877] PM: Hibernation image not present or could not be loaded.
    [ 0.733883] registered taskstats version 1
    [ 0.734299] rtc_cmos 00:06: setting system clock to 2012-07-19 05:23:13 UTC (1342675393)
    [ 0.734449] Initializing network drop monitor service
    [ 0.736068] Freeing unused kernel memory: 740k freed
    [ 0.736186] Write protecting the kernel read-only data: 8192k
    [ 0.741922] Freeing unused kernel memory: 1588k freed
    [ 0.744508] Freeing unused kernel memory: 640k freed
    [ 0.752904] systemd-udevd[48]: starting version 186
    [ 0.755540] SCSI subsystem initialized
    [ 0.757022] libata version 3.00 loaded.
    [ 0.757753] ahci 0000:00:1f.2: version 3.0
    [ 0.757857] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
    [ 0.757916] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
    [ 0.757920] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
    [ 0.757927] ahci 0000:00:1f.2: setting latency timer to 64
    [ 0.760754] scsi0 : ahci
    [ 0.760973] scsi1 : ahci
    [ 0.761219] scsi2 : ahci
    [ 0.761696] scsi3 : ahci
    [ 0.761814] scsi4 : ahci
    [ 0.762047] scsi5 : ahci
    [ 0.762660] ata1: SATA max UDMA/133 abar m2048@0xf7d1e000 port 0xf7d1e100 irq 42
    [ 0.762664] ata2: DUMMY
    [ 0.762665] ata3: DUMMY
    [ 0.762667] ata4: DUMMY
    [ 0.762668] ata5: DUMMY
    [ 0.762670] ata6: DUMMY
    [ 0.766691] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.079319] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1.090674] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 1.090818] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.090822] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.101189] ata1.00: ATA-8: ADATA XM11 128GB, 5.0.1, max UDMA/133
    [ 1.101208] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.110592] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 1.110759] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.110763] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.121163] ata1.00: configured for UDMA/133
    [ 1.121291] scsi 0:0:0:0: Direct-Access ATA ADATA XM11 128GB 5.0. PQ: 0 ANSI: 5
    [ 1.123017] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
    [ 1.123090] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.123095] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.123119] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.123778] usbcore: registered new interface driver usbfs
    [ 1.123805] usbcore: registered new interface driver hub
    [ 1.123854] usbcore: registered new device driver usb
    [ 1.124316] sda: sda1 sda2 sda3
    [ 1.124612] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.125369] xhci_hcd 0000:00:14.0: setting latency timer to 64
    [ 1.125376] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.125423] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
    [ 1.125529] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 1.125550] xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7d00000
    [ 1.125619] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
    [ 1.125765] xHCI xhci_add_endpoint called for root hub
    [ 1.125769] xHCI xhci_check_bandwidth called for root hub
    [ 1.125819] hub 1-0:1.0: USB hub found
    [ 1.125832] hub 1-0:1.0: 4 ports detected
    [ 1.126030] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.126038] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
    [ 1.126165] xHCI xhci_add_endpoint called for root hub
    [ 1.126169] xHCI xhci_check_bandwidth called for root hub
    [ 1.126239] hub 2-0:1.0: USB hub found
    [ 1.126251] hub 2-0:1.0: 4 ports detected
    [ 1.129851] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.129926] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 1.129933] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    [ 1.129954] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 1.129988] ehci_hcd 0000:00:1a.0: debug port 2
    [ 1.133867] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    [ 1.133883] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7d20000
    [ 1.142574] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 1.142727] hub 3-0:1.0: USB hub found
    [ 1.142731] hub 3-0:1.0: 2 ports detected
    [ 1.142859] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.142866] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    [ 1.142879] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
    [ 1.142914] ehci_hcd 0000:00:1d.0: debug port 2
    [ 1.146795] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    [ 1.146814] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7d1f000
    [ 1.155902] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 1.156064] hub 4-0:1.0: USB hub found
    [ 1.156069] hub 4-0:1.0: 2 ports detected
    [ 1.161829] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
    [ 1.162274] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 1.164964] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
    [ 1.165093] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
    [ 1.167496] [drm] Initialized drm 1.1.0 20060810
    [ 1.168381] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 1.179358] ACPI: Lid Switch [LID]
    [ 1.179416] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 1.179422] ACPI: Power Button [PWRB]
    [ 1.179469] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
    [ 1.179474] ACPI: Sleep Button [SLPB]
    [ 1.183098] i915 0000:00:02.0: setting latency timer to 64
    [ 1.398826] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
    [ 1.398830] [drm] MTRR allocation failed. Graphics performance may suffer.
    [ 1.399105] i915 0000:00:02.0: irq 44 for MSI/MSI-X
    [ 1.399167] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 1.399169] [drm] Driver supports precise vblank timestamp query.
    [ 1.399738] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 1.482168] usb 1-2: new high-speed USB device number 2 using xhci_hcd
    [ 1.499154] usb 1-2: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
    [ 1.499163] usb 1-2: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
    [ 1.605348] usb 3-1: new high-speed USB device number 2 using ehci_hcd
    [ 1.718541] Refined TSC clocksource calibration: 1696.146 MHz.
    [ 1.718545] Switching to clocksource tsc
    [ 1.729014] hub 3-1:1.0: USB hub found
    [ 1.729085] hub 3-1:1.0: 6 ports detected
    [ 1.835066] usb 4-1: new high-speed USB device number 2 using ehci_hcd
    [ 1.958735] hub 4-1:1.0: USB hub found
    [ 1.958810] hub 4-1:1.0: 6 ports detected
    [ 2.025002] usb 3-1.2: new high-speed USB device number 3 using ehci_hcd
    [ 2.224762] usb 4-1.5: new high-speed USB device number 3 using ehci_hcd
    [ 2.474462] usb 4-1.6: new full-speed USB device number 4 using ehci_hcd
    [ 2.667462] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
    [ 3.173881] checking generic (e0000000 300000) vs hw (e0000000 10000000)
    [ 3.173885] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
    [ 3.173902] Console: switching to colour dummy device 80x25
    [ 3.175315] fbcon: inteldrmfb (fb0) is primary device
    [ 4.162812] Console: switching to colour frame buffer device 240x67
    [ 4.168648] fb0: inteldrmfb frame buffer device
    [ 4.168650] drm: registered panic notifier
    [ 4.170494] ACPI Warning: _BQC returned an invalid level (20120320/video-472)
    [ 4.170803] acpi device:35: registered as cooling_device0
    [ 4.171244] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
    [ 4.171252] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 4.171274] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 4.261463] device-mapper: uevent: version 1.0.3
    [ 4.261618] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
    [ 7.530172] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
    [ 7.671884] systemd-udevd[206]: starting version 186
    [ 7.701027] ACPI: Requesting acpi_cpufreq
    [ 7.708519] Monitor-Mwait will be used to enter C-1 state
    [ 7.708550] Monitor-Mwait will be used to enter C-2 state
    [ 7.708563] ACPI: acpi_idle registered with cpuidle
    [ 7.765552] ACPI: AC Adapter [AC0] (on-line)
    [ 7.792019] ACPI: Battery Slot [BAT0] (battery present)
    [ 7.842020] wmi: Mapper loaded
    [ 7.849215] thermal LNXTHERM:00: registered as thermal_zone0
    [ 7.849223] ACPI: Thermal Zone [THRM] (54 C)
    [ 7.856172] mei: module is from the staging directory, the quality is unknown, you have been warned.
    [ 7.856873] mei 0000:00:16.0: setting latency timer to 64
    [ 7.857061] mei 0000:00:16.0: irq 45 for MSI/MSI-X
    [ 7.867562] iTCO_vendor_support: vendor-support=0
    [ 7.870231] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 7.870413] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
    [ 7.878227] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 7.880017] cfg80211: Calling CRDA to update world regulatory domain
    [ 7.887026] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \SMB0 1 (20120320/utaddress-251)
    [ 7.887035] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 2 (20120320/utaddress-251)
    [ 7.887041] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 7.890845] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 7.895102] usbcore: registered new interface driver uas
    [ 7.897297] Initializing USB Mass Storage driver...
    [ 7.897383] scsi6 : usb-storage 1-2:1.0
    [ 7.897494] usbcore: registered new interface driver usb-storage
    [ 7.897496] USB Mass Storage support registered.
    [ 7.905414] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [ 7.908378] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
    [ 7.908380] Copyright(c) 2003-2012 Intel Corporation
    [ 7.908463] iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000
    [ 7.908465] iwlwifi 0000:02:00.0: pci_resource_base = ffffc900040c8000
    [ 7.908467] iwlwifi 0000:02:00.0: HW Revision ID = 0x24
    [ 7.908564] iwlwifi 0000:02:00.0: irq 47 for MSI/MSI-X
    [ 7.909834] Linux media interface: v0.10
    [ 7.912145] Linux video capture interface: v2.00
    [ 7.912309] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
    [ 7.916365] scsi7 : SCSI emulation for RTS5139 USB card reader
    [ 7.924679] scsi 7:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
    [ 7.926600] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b330)
    [ 7.927768] sd 7:0:0:0: [sdb] Attached SCSI removable disk
    [ 7.927991] Bluetooth: Core ver 2.16
    [ 7.928007] NET: Registered protocol family 31
    [ 7.928009] Bluetooth: HCI device and connection manager initialized
    [ 7.928012] Bluetooth: HCI socket layer initialized
    [ 7.928014] Bluetooth: L2CAP socket layer initialized
    [ 7.928025] Bluetooth: SCO socket layer initialized
    [ 7.929593] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
    [ 7.930401] usbcore: registered new interface driver rts5139
    [ 7.932134] usbcore: registered new interface driver btusb
    [ 7.938575] input: USB2.0 HD UVC WebCam as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/input/input6
    [ 7.939734] usbcore: registered new interface driver uvcvideo
    [ 7.939737] USB Video Class driver (1.1.1)
    [ 7.959022] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 7.960155] asus_wmi: ASUS WMI generic driver loaded
    [ 7.961792] asus_wmi: Initialization: 0x1
    [ 7.961840] asus_wmi: BIOS WMI version: 7.9
    [ 7.962148] asus_wmi: SFUN value: 0x4a2877
    [ 7.963015] asus_wmi: Can't find DSTS
    [ 7.968179] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1
    [ 7.968413] iwlwifi 0000:02:

    Hi, I bought the UX32VD a few weeks ago. Most of the steps, mentioned in the article about the UX31A apply to the UX32VD too. I don't know what your problems are. All the steps are explained.
    [ 8.039202] asus_wmi: Can't find DSTS
    Just patch the kernel with the mentioned fix, or use the dkms variant. This will fix the can't find DSTS issue. After that, the asus-nb-wmi (or sth. like that) module will be loaded successfully, which makes most of the function keys work (except the screen brightness keys). The only thing remaining is to use the supplied hackarounds to be able to change the screenbrightness.
    After these steps, I created a .Xmodmap to remap the automatic kbd. backlight key and the touchpad disable key to XF86MonBrightnessDown (or so .. can't remember the exact name) and XF86MonBrightnessUp and respectively mapped the shortcuts with xfce4-keyboard-settings (XF86MonBrightnessDown to the command backlight down, XF86MonBrightnessUp to backlight up). Unfortunately, sometimes this is a little bit buggy. The scan codes change randomly on some reboots, eg: one time it gets recognized as XF86MonBrightnessUp, and a few keypresses later as something different.
    Hope they fix this issue with the 3.5 kernel, and eventually get the actual screenbrightness buttons to work.

  • RE: RE: Function keys and droplists

    I had to implement the same problem in a window. I wanted Ctrl-F to be the
    same as the "Fetch" button. I forgot the SetAsFunctionKey existed, so I
    created a Menu choice with a shortcut of "Find." I have had no problems,
    when
    Ctrl-F is pressed the "menuWidget.activate" event is posted and no keystroke
    events are sent at all.
    Greg.Nyberg wrote>>>From: [email protected]
    Date: Tue, 26 Jan 1999 10:20:40 -0600
    Subject: RE: Function keys and droplists
    Also note that if you set a cntrl-<letter> as a function key, any time the
    user types that letter (without the cntrl) in any entry field on the window,
    the field gets an "aftervaluechange" event fired. Normally aftervaluechange
    doesn't fire until after you leave the field... This caused us significant
    problems in the use of cntrl-<letter> key combinations, since we were
    validating the contents of fields as the user left them in some cases. We
    went back to only using the upper-row function keys, avoiding F1 (help) and
    F10 which have undesirable side effects as you describe. F4 is also a
    problem as it tends to open droplists before getting processed as a function
    key, but we could live with that.
    - -Greg
    -----Original Message-----
    From: Thomas Kunst [SMTP:[email protected]]
    Sent: Tuesday, January 26, 1999 3:18 AM
    To: [email protected]
    Cc: Ostlund, Scott CWT-MSP
    Subject: Re: Function keys and droplists
    It is a general problem with the SetAsFunctionKey method that the
    default behaviour of the key - which is present if you do not call
    SetAsFunctionKey - is not disabled after the key is used as function
    key. We have this problem under Windows: the F10 key has a default
    behaviour of activating the window's menu. Now if you set F10 as
    function key, the corresponding Forte event is posted to the window
    but
    the menu is still activated. Forte refuses to acknowledge this as a
    bug,
    but maybe requests from several people can convince them ...
    Ostlund, Scott CWT-MSP wrote:
    >
    > Picture a grid with a bunch of widgets within it. Inside this
    grid there is
    > a 'Find' button accelerated with the letter 'F'. Also inside
    there is a
    > droplist. When the user places focus on the droplist and hits
    Ctrl+F to
    > shortcut the find button the method to handle the button click is
    called but
    > the droplist changes to the first element beginning with the
    letter 'F' as
    > well. Does anyone know of a way to not change the droplist when I
    am
    > handling the letter 'F' as a function key?
    Dr. Thomas Kunst mailto:[email protected]
    sd&m GmbH & Co. KG http://www.sdm.de
    software design & management
    Thomas-Dehler-Str. 27, 81737 Muenchen, Germany
    Tel +49 89 63812-221 Fax -444
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive
    <URL:http://pinehurst.sageit.com/listarchive/>
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    I had to implement the same problem in a window. I wanted Ctrl-F to be the
    same as the "Fetch" button. I forgot the SetAsFunctionKey existed, so I
    created a Menu choice with a shortcut of "Find." I have had no problems,
    when
    Ctrl-F is pressed the "menuWidget.activate" event is posted and no keystroke
    events are sent at all.
    Greg.Nyberg wrote>>>From: [email protected]
    Date: Tue, 26 Jan 1999 10:20:40 -0600
    Subject: RE: Function keys and droplists
    Also note that if you set a cntrl-<letter> as a function key, any time the
    user types that letter (without the cntrl) in any entry field on the window,
    the field gets an "aftervaluechange" event fired. Normally aftervaluechange
    doesn't fire until after you leave the field... This caused us significant
    problems in the use of cntrl-<letter> key combinations, since we were
    validating the contents of fields as the user left them in some cases. We
    went back to only using the upper-row function keys, avoiding F1 (help) and
    F10 which have undesirable side effects as you describe. F4 is also a
    problem as it tends to open droplists before getting processed as a function
    key, but we could live with that.
    - -Greg
    -----Original Message-----
    From: Thomas Kunst [SMTP:[email protected]]
    Sent: Tuesday, January 26, 1999 3:18 AM
    To: [email protected]
    Cc: Ostlund, Scott CWT-MSP
    Subject: Re: Function keys and droplists
    It is a general problem with the SetAsFunctionKey method that the
    default behaviour of the key - which is present if you do not call
    SetAsFunctionKey - is not disabled after the key is used as function
    key. We have this problem under Windows: the F10 key has a default
    behaviour of activating the window's menu. Now if you set F10 as
    function key, the corresponding Forte event is posted to the window
    but
    the menu is still activated. Forte refuses to acknowledge this as a
    bug,
    but maybe requests from several people can convince them ...
    Ostlund, Scott CWT-MSP wrote:
    >
    > Picture a grid with a bunch of widgets within it. Inside this
    grid there is
    > a 'Find' button accelerated with the letter 'F'. Also inside
    there is a
    > droplist. When the user places focus on the droplist and hits
    Ctrl+F to
    > shortcut the find button the method to handle the button click is
    called but
    > the droplist changes to the first element beginning with the
    letter 'F' as
    > well. Does anyone know of a way to not change the droplist when I
    am
    > handling the letter 'F' as a function key?
    Dr. Thomas Kunst mailto:[email protected]
    sd&m GmbH & Co. KG http://www.sdm.de
    software design & management
    Thomas-Dehler-Str. 27, 81737 Muenchen, Germany
    Tel +49 89 63812-221 Fax -444
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive
    <URL:http://pinehurst.sageit.com/listarchive/>
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

  • How to active F16 function key?

    I have a MacPro with a wireless keyboard that has F1-F16 function keys. I cannot figure out how to activate them; I am trying to emulate the Pause/Break key on a PC, which is F16 on a Mac. System Preferences, Keyboards doesn't give an option to activate the function keys. Some instructions I've found for other keyboards say to hold down the function key (Fn) while pressing the desired function key, in my case F16. But there is no function key on this keyboard.
    So, how do I activate the F16 function key to make it act as a PC Pause/Break key? Thanks!!

    When you open the KB/M prefs are there not several buttons at the top? Labled "Keyboard", "Mouse", "Bluetooth" and "Keyboard Shortcuts"? If not, there is something wrong with your installation. If there is, "Keyboard shortcuts" is the one you want to click on.
    Message was edited by: David DeCristoforo

  • My function keys are not working.  How can I get them to work again?

    None of my function keys are working on my macbook pro.  I can't adjust the volume, brightness, or any other of the keys.
    Please help!

    Just to clarify, it only works when the phone is plugged in and charging. What happens when you try to activate it? Is there any error message?

  • Using f4 as a function key

    Hi All,
    F4 key is used for searh help.I my RF(module pool) program i want to use it for a different purpose.
    Can you please tell me how to achieve it.In my PF-status i see the reserved keys like F4,F1 etc are available in Utilities-->Fkey Consistency.I have given the function code for F4 there.But it does not work.
    Please let me know how to achieve the same.
    Regards,
    Subasree

    When u go in Utilities -> Fkey status there u see the F4 key.
    Now u go in change mode and u will be able to write your Function Code agaisnt F4 key and activate it and now open back ur pF satatus u will be able to see the F4 in ur status there activate the Fkey and activate the status.

  • Fn Function Key Issues

    My FN key is sometimes turned off after booting allowing me to use the F1-12 keys without having to press the FN key, however sometimes it is turned on and pressing F keys does all the stuff represented by the symbols ontop of the F key and to access the traditional uses I must press FN. In more sober words they sometimes randomly switch after booting. How can I control and remap these keys and stuff?
    Also arch forums search is terrible

    What kind of computer is this?  Is there a setting in the bios for toggling the function keys?  Is it a mac(book)?  If so, did you read the wiki articles about that?
    Do you want to fix this issue of inconsistency, or do you want to remap keys "and stuff"?  If you want to remap keys, this can depend on what WM/DE you are using.  There are wiki articles on this as well.
    I know that's a lot of questions, but we'll need more information to give you any suitable direction.

  • Function keys status is not showing on screen

    Hi... please help me.  I m havin lenova ideapad s10-2 netbook. In this when i press fn + function keys action is performing but its status is not displaying on screen. So if i want to switch on WLAN when i press fn+F5 screen is not showing. Also usb devices are not detecting my laptop. Please help me out.......
    Thanks
    Solved!
    Go to Solution.

    shiva2shetty wrote:
    Thanks 4 information. I will try it. Also QS (Quick start) and "one key recovery" is not working when OS is loaded. I need to open from start menu. After that only QS and Function key status display are working. So can you tell me how to load these twodefault  when OS boots.
    Thanks
    Hi for Qucikstart ... if there is still installed .. you could activate in in two ways... Start Computer press immidiate F2 for BIOS in move with arrow keys to CONFIG Page there you could found Quickstart set to enable... leave with press F10 save and exit...
    or in windows XP start control panel you found QUICKSTART Configuration Tool click on this program you could activate at startup save and exit...
    Or if Quickstart is not installed  .. download from here S10-2 Driver Site 
    there you can also found OKR
    sincerely KalvinKlein
    by the way ... did you re-install the system ? which OS did you use? , you didnt say that in your first post  ... that sounds to me that you try to  re-install or use an old XP without SP3 ....
    To fulfill your quest here is the driver page... for all  ... pick your S10-2 OS drivers and install at first the chipset driver...
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

  • Change sscrfields structure function key dynamically

    Hi ,
       I want to create own function key for selection-screen button in application toolbar.
         If possible to change at run time.
    Thanks.
    INITIALIZATION.
      SSCRFIELDS-FUNCTXT_01 = 'INSERT'.
      SSCRFIELDS-FUNCTXT_02 = 'UPDATE'.
    AT SELECTION-SCREEN OUTPUT.
    SET PF-STATUS 'TEST'  .
    The exixt func.keys are CnttF1 & CntlF2.I want to change into F6 & F7.

    Hi mani,
    welcome to SCN.
    You can not create function key in default selection-screen. Actualy there are 5 pushbutton available there . you can activate or de-activate them. please check the following link for further detail.
    http://help.sap.com/saphelp_nw70/helpdata/en/9f/dba80935c111d1829f0000e829fbfe/content.htm
    Regards,
    Anirban

  • Function keys on the screen

    hi folks,
    I have a question, I created a new function key called 'display' for the screen using the menu painter used that in the program and executed the program successfully in DEV environment. when I moved the changes (moved all) to QAS the function key 'display' did not show up. I checked to see that the function key item got moved using the menu painter in QAS. The item is there in QAS amd checked for the changes in the program using version management. no changes How come the function key is missing on the screen in QAS?
    Am I missing anything here?
    Thanks,
    SK

    If you activate your program after you've made your screen changes, sometimes you lose those screen changes.  You may need to go back in to the screen and reactivate, then transport it.  If necessary, make a small change (like adding a blank line somewhere in the flow logic of the screen) in order to get the screen changes into a transport.  I hope this helps.
    - April King

Maybe you are looking for

  • Activation fails using automated phone system

    I've used a MAK to activate several Windows Server2012 R2 machines using the automated phone system. On one machine, I enter the confirmation ID and get the "Thanks, you're all done" message, but when I check using slmgr, it still shows Unlicensed. I

  • User rights to view package status

    A few of our Windows admins have been given the rights to create packages and deployments (mainly for the monthly updates). However, even though they can create and deploy them, they cannot see the package status.  So, if they go to: Software Updates

  • Connecting to Oracle using JDBC

    Hi all, I am a new to Oracle. I am trying to connect to Oracle using JDBC The URL with which I tried to connect was: jdbc:oracle:oci8:@myServiceName,user='myLogin',password='myPassword' I get an error (ORA-12154) - TNS could not resolve service name

  • I have Iphone 5 with 7 installed. Facetime will not connect. How do I fix this?

    I start face time either by selecting the contact then Facetime or go to Facetime then selecting the contact. It starts to ring the far party answers the phone says connecting then it times out and says that the contact not available. It does this ev

  • Subscription not active although I paid

    hi i have a problem i bought 400 min to call iran but i can't see it in my account i sent you on your facebook page as a message but i didn't get any reply  can you please check that for me ??