Function key to execute key-f5 trigger

Dear all,
I have migrated a forms 6i to 10gR1 and I would like to call existing KEY-F5 trigger by pressing a function key (F5) on the keyboard.
How to do that?
I have tried several things with the file fmrweb.res but without any success yet.
Anyone to help me?
Thanks and best regards,
Sebastien

I found the solution by using key accelerator
Thanks and best regards,
Sebastien

Similar Messages

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

What are the functions of all the keys on my (not wireless) keyboard?

what are the functions of all the keys on the (non wireless) keyboard?

System Preferences > Language and Text > Input Sources tab. Top of the left column, tick (check) "Keyboard and Character Viewer", Bottom of window next to search field, tick "Show input menu in menu bar"
System Preferences > Keyboard > Keyboard tab; tick "show keyboard and character viewers in menu bar"
If you open Keyboard Viewer and press the alt (option) key, the location of the diacritical marks and common symbols will be revealed. Note that five of them are highlighted in orange; these are the ones which can be used with multiple letters (acute, umlaut, gràve, circumflex and tilde)
Shift+Alt will show more.

How to use standard function keys as custom keys

how to use standard function keys as custom keys.
i have encountered that problem while developing a screen, there i'm supposed to use standard function key F2 ( which actually meant for choose) for clearing the screen fields where the cursor is present and f1 for saving data that entered in screen fields, etc...
kindly help me out.

Hi ,
Solution to use SAP reserve function keys F1 .. F4 (mostly this requirement comes up for RF screens) can be acheived by assigning your new Function code using the Menu path Utilities --> F key Consistency in the Menu Painter (SE41) . Once you assign your cutom function code to the standard Fn keys the only remaining step is to make sure that you set a curson on any of the field on sceen by using the Key Word "SET CURSOR" .
If you dont use the key word SET CURSOR in the PBO of the screen then you might not see any response for F4.
Thanks

Arrow keys and enter key not functioning in Firefox 3.6 when viewing PDF

I'm using Adobe Reader 9.3.0.
I have a web application that displays PDFs (using Adobe Reader) in a browser. The PDF is loaded onto the page inside an IFRAME. In addition to the IFRAME containing a PDF, the page also includes several forms, text fields, etc. For the most part this is working fine. However, I have a glitch when using this in Firefox 3.6. I'm finding that certain keyboard events are being lost and I strongly suspect that they are being swallowed by Adobe Reader. When I place focus on an HTML text field and press enter key or arrow keys, I do not get the appropriate key events. If I run the exact same test without the PDF IFRAME these key events work correctly, but as soon as I load the PDF into the IFRAME they do not. I believe the primary key event that gets lost is the keydown event. I do get the keyup event.
Again, the events work correctly up until I load the PDF onto the page.
I've verified that this error does not occur in Firefox 3.5 and 3.0.
Here is a testcase to reproduce this:
<html>
<head>
    <title>JavaScript - Detecting keystrokes</title>
    <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
    <script type="text/javascript">
        var pdfURL = 'http://samplepdf.com/sample.pdf';
        window.onload = function () {
            init();
        document.defaultAction = true;
        function init() {
            var x = document.getElementById('testForm').getElementsByTagName('input');
            for (var i=0;i<x.length;i++) {
                x[i].onclick = setEvents;
                if (x[i].checked)
                    x[i].onclick();
            writeroot = document.getElementById('writeroot');
            document.getElementById('emptyWriteroot').onclick = function () {
                writeroot.innerHTML = '';
                return false;
        function setEvents() {
            if (this.id == 'default') {
                document.defaultAction = !this.checked;
                return;
            var eventHandler = (this.checked) ? detectEvent : empty;
            document.getElementById('textfield')['on'+this.id] = eventHandler;
            //document['on'+this.id] = eventHandler;
        function detectEvent(e) {
            var evt = e || window.event;
            writeData('<b>'+evt.type+'</b>: keyCode=' + evt.keyCode+' : charCode=' + evt.charCode);
            return document.defaultAction;
        function empty() {
            // nothing
        var writeroot;
        function writeData(msg) {
            writeroot.innerHTML += msg + '<br />';
    </script>
    <style type="text/css">
        body {
            font-size: 12px;
        #writeroot {
            height: 300px;
            overflow: auto;
            border: 1px solid #2EB2DC;
    </style>
</head>
<body>
<form id="testForm">
<input type="checkbox" id="keydown" /> <label for="keydown">keydown</label><br />
<input type="checkbox" id="keypress" /> <label for="keypress">keypress</label><br />
<input type="checkbox" id="keyup" /> <label for="keyup">keyup</label><br />
<input type="checkbox" id="default" /> <label for="default">Suppress default action</label><br />
<input type="text" id="textfield" /><br />
<button id="emptyWriteroot">Remove messages</button>
</form>
<a href="#" onclick="document.getElementById('docviewer-page').src=pdfURL;return false">Now load IFrame</a>
<p id="writeroot"></p>
<div id="container2" style="border:1px solid black;width:400px;height:200px">
        <iframe
            id='docviewer-page'
            name='docviewer-page'
            title='document page'
            src='http://www.google.com'
            align='left'
            width='100%'
            height='100%'
            scrolling='auto'
            frameborder=0></iframe>
</div>
</body>
</html>
Paste the above into an HTML document. Open the HTML document in Firefox 3.6. Check the four checkboxes. Move into the text field and press arrow keys and enter key to observe the results when it is working correctly. Then click on the "Now Load PDF" link. Press the arrow keys and enter key again and observe that the behavior has changed.
Anybody have any idea why this is happening or how to work around it?

I found a workaround!
By using an object tag instead of an iframe, all the keys seems to work fine and the PDF still renders in the page the same way.
Here's a page that works:
<html>
<head>
    <title>JavaScript - Detecting keystrokes</title>
    <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
    <script type="text/javascript">
        var pdfURL = 'http://samplepdf.com/sample.pdf';
        window.onload = function () {
            init();
        document.defaultAction = true;
        function init() {
            var x = document.getElementById('testForm').getElementsByTagName('input');
            for (var i=0;i<x.length;i++) {
                x[i].onclick = setEvents;
                if (x[i].checked)
                    x[i].onclick();
            writeroot = document.getElementById('writeroot');
            document.getElementById('emptyWriteroot').onclick = function () {
                writeroot.innerHTML = '';
                return false;
        function setEvents() {
            if (this.id == 'default') {
                document.defaultAction = !this.checked;
                return;
            var eventHandler = (this.checked) ? detectEvent : empty;
            document.getElementById('textfield')['on'+this.id] = eventHandler;
            //document['on'+this.id] = eventHandler;
        function detectEvent(e) {
            var evt = e || window.event;
            writeData('<b>'+evt.type+'</b>: keyCode=' + evt.keyCode+' : charCode=' + evt.charCode);
            return document.defaultAction;
        function empty() {
            // nothing
        var writeroot;
        function writeData(msg) {
            writeroot.innerHTML += msg + '<br />';
    </script>
    <style type="text/css">
        body {
            font-size: 12px;
        #writeroot {
            height: 300px;
            overflow: auto;
            border: 1px solid #2EB2DC;
    </style>
</head>
<body>
<form id="testForm">
<input type="checkbox" id="keydown" /> <label for="keydown">keydown</label><br />
<input type="checkbox" id="keypress" /> <label for="keypress">keypress</label><br />
<input type="checkbox" id="keyup" /> <label for="keyup">keyup</label><br />
<input type="checkbox" id="default" /> <label for="default">Suppress default action</label><br />
<input type="text" id="textfield" /><br />
<button id="emptyWriteroot">Remove messages</button>
</form>
<a href="#" onclick="document.getElementById('docviewer-page').data=pdfURL;return false">Now load IFrame</a>
<p id="writeroot"></p>
<div id="container2" style="border:1px solid black;width:400px;height:200px">
        <object
            id='docviewer-page'
            name='docviewer-page'
            title='document page'
            data='http://www.google.com'
            align='left'
            width='100%'
            height='100%'
            ></object>
</div>
</body>
</html>

In the last few days, I've encountered a problem with scrolling with my up & down keys. The up & down keys seem to, now function as Home & End keys. MyPage Up & Page Down keys seem to do nothing. What is wrong?

In the last few days, I've encountered a problem with scrolling with my up & down keys. The up & down keys seem to, now function as Home & End keys. MyPage Up & Page Down keys seem to do nothing. What is wrong?

Hit the '''F7''' key, you probably have Caret browsing turned on.
http://kb.mozillazine.org/Accessibility.browsewithcaret

Can one call a function module in Calculated Key Figure?

Can one call a function module in Calculated Key Figure? If yes how, if not, what is the solution if formula does not suffice?
I want to convert duration which is in seconds to Duration in Hours and Minutes. There is a function module for doing it. Not sure how to do it in a formula.

One option you have is a Virtual Key Figure and User Exit to use the Function Module to convert the time from seconds to HH:MM. Here are two documents on this subject to help you create them, based on the technology your comfortable with:
[Implementing Virtual Key Figure/ Characteristics Makes Query More Dynamic|https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e051fda8-71a9-2a10-ac9e-8d17414a8c8c&overridelayout=true]
[Step By Step Process for Virtual Key Figures and Characteristics through BAdi|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/60e34f63-f44c-2c10-488e-c89b04e0ca7c&overridelayout=true]

The function of the F keys at the top of my keyboard no longer work as they used to. How do I restore their old function?

The function of the F keys at the top of my keyboard no longer work as they used to. The actions they do no longer correspond to the symbols that are printed on them. For example, the volume buttons no longer control volume and now change the display to full-screen instead, and the brightness buttons don't do anything at all.
This started today and I'm finding it very irritating. I checked in System Preferences and didn't find any obvious way to turn most of them back to what they used to do.
Help?

In System Preferences > Keyboard uncheck Use all F1, F2, etc. keys as standard function keys.

Is there a possibility to switch off in Firefox the functionality of quick launch key (additional key in laptop) that cause to run the homepage

Dear Support,
Is there a possibility to switch off in Firefox the functionality of quick launch key (additional key in laptop) that cause to run the homepage. I would like to switch this functionality off, because the key is malfunctioned and always pressed. I was able to switch off the functionality of this key in Windows system by deleting entries in registry Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey. After this change, when somebody works in system the Firefox is not running is not launching all the time. But when I open the Firefox the setting in system is overwritten and when I am using it Firefox returns to the homepage instantly. I think because of this quick launch button. I tried to change settings in about:config like browser.startup.homepage, browser.startup.homepage_override, startup.homepage_override_url,… this is for Firefox version is 10.0.2
Thank you
Best Regards

Hi,
Thank you for your interesst.
This internet button key is one of buttons located above the keyboard near the power button. What I have achieved to this moment was to stop it functionality in the system by clearing the entries in the fields Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\17\ShellExecute and entry
Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\7\Association that was http
After these changes in registry the behavior of the button was suppressed, the Firefox stopped to start unexpectedly all the time – so in system it works. But the problem is still when I have opened Firefox. Every time when you want to surf in internet – the homepage is activated also unexpectedly. I wrote this post with intention to ask if there is a possibility to switch off the functionality of this quick launch button in Firefox. Because I assume Firefox overrides the system setup – this I have made in registry. I tried with some option changes in about:config but without success. And I know that for older versions of firefox was some option in about:config do disable_quick launch button. But in 10.0.2 I couldn't locate it.
Thank you
Regards
Lukasz

MSI Wind U110 - Reverse/swap the keys functions of the "Fn" key with "Left Ctrl"

Hi guys,
is there a bios-fix to reverse/swap the keys functions of the "Fn" key with "Left Ctrl" for the MSI Wind U110. I don't know why this keyboard is still that disfunctional. I think this is a well known issue, people complaining about for a long time. I am really hoping that you can help me.
Thank you, CyberKlabauter.

Quote from: Henry on 08-December-09, 10:47:03
Have you tried using the 'Search' function up there.
I did. But maybe I'm to stupid to do it right. I found this thread http://forum.msi.com.tw/index.php?topic=121066.0 but there is nothing about the U110. If I'm searching for U110 I get only three topics (one is this one). I guess I shouldn't use any bios hack from a other model.
May you're willing to help me a little bit more. Thank you.

Assigning a key to function as an Option key

The Microsoft Wireless Comfort Keyboard 4000 is Mac & Windows Vista compatible and just what I need, but how do I get the Windows (or any other) key to function as an Option key and especially when booting back and forth using Boot Camp? So far, none of the keys I've pressed brings up the choice of OS upon reboot.

Hope I'm not duplicating -- lost two replies before posting.
The Alt key seems to work like an Option key sometimes in some programs, but not for choosing the OS when rebooting via Boot Camp. Everything worked with the iMac keyboard, but I need this ergonomic setup so got a Win keyboard that's supposedly also Mac compatible.
New to Mac (less than a year), trying to learn the differences. Also, found no way to use the NumLock so the keypad can be used for cursoring around. That's been the most difficult adjustment.

Open VI Reference Function won't execute in multi process application

I have a sub vi with Reentrant execution, and it has
recursive call on some cases.
It is very similar to OpenG VI “Read Key
(Variant)__ogtk.vi”, my sub vi works without any problem unit LabVIEW’s Two
Button Dialog is opened in other process loop.
I have attached a Test VI, and would like to understand why
would Loop 1’s Dialog box have any execution impact on Loop 2’s process?
Why Open VI Reference Function won’t execute when Two Button
Dialog is opened in other process?
LabVIEW version 8.6
Thanks,
Attachments:
Test Vi.zip ‏17 KB

Broken Arrow wrote:
LabVIEW's native dialog box is Modal. It will not let anything else run which requires (or MAY require) user input. In the case of your code, LabVIEW can't open a VI with a modal process going.
Broken Arrow thanks for your reply, but not sure if I understand Modal dialog box would cause the problem.
I already had a work around by using Three Button Dialog VI, and it is s Modal VI.
I would still like to understand, why would DataFlow halt at Open VI Reference Function in Loop 2 when I use when Two Button Dialog?
Attachments:
Test Vi 2.zip ‏20 KB

Function code for execute button

Hi,
I have a requirement like this...
there is a program for selective deletion from a data target by a transaction called delete_facts.
this generates a program for selective deletion. when i run this report there comes one screen asks for selections fields and then again excute it then deletion will happen.
But this program i need to modify for certain default values so as to avoid entering of the values in the selection screen.
i will use default value this will solve my 1st purpose but since this program has to be scheduled from process chain, the 2nd execute funtionality( once the values appear in the screen) shud be automated.
can anybody tell me how to do this that is after program runs values will be passed to selection screen and selection screen shud not be shown and execute shud happen automatically.
this is the code generated by transaction delete_facts:
*& Report ZTEST_DELETE1
REPORT ZTEST_DELETE1.
generated Header from i_sel_repid
generated REPORT (RSDRD)
(should be deleted after use)
Generated by..: SALAGUN
Date/Time.....: 20070322 / 051426
*REPORT GP457FUV92GJS4663HYHXLYC9Q7 .
generated Tables from i_t_tables
                 and i_datatarget
TABLES:
SSCRFIELDS,
/BIC/SZTESTBC
,/BI0/SCHNGID
,/BI0/SRECORDTP
,/BI0/SREQUID
,/BI0/SDATE
,/BI0/SUNIT
generated DATA/TYPES
TYPE-POOLS: RSDRD, RSDQ.
DATA:
L_INTERACTIVE      TYPE RS_BOOL,
L_ANSWER(1)        TYPE C,
L_TYPE(1)          TYPE C,
L_PARALLEL         TYPE I,
L_NO_OF_ROWS       TYPE I,
L_NO_OF_ROWS_C(10) TYPE C,
L_TITEL            TYPE RS_CHAR72,
L_TEXT1            TYPE RS_CHAR72,
L_TEXT2            TYPE RS_CHAR72,
L_S_RANGE          TYPE RSDRD_S_RANGE,
L_S_SELTXT         TYPE RSDQ_S_SELTEXT,
L_SX_SEL           TYPE RSDRD_SX_SEL,
L_T_MSG            TYPE RS_T_MSG,
L_THX_SEL          TYPE RSDRD_THX_SEL,
L_T_SELTXTS        TYPE RSDQ_T_SELTEXT
                          WITH HEADER LINE.
generated SELECTION-SCREEN from i_t_selscr
SELECTION-SCREEN BEGIN OF BLOCK B001 WITH FRAME TITLE T001 .
SELECT-OPTIONS C001 FOR /BIC/SZTESTBC-/BIC/ZTESTBC
default 'D' TO 'C'.
SELECTION-SCREEN   END OF BLOCK B001 .
SELECTION-SCREEN BEGIN OF BLOCK B002 WITH FRAME TITLE T002 .
SELECT-OPTIONS C002 FOR /BI0/SCHNGID-SID .
SELECT-OPTIONS C003 FOR /BI0/SRECORDTP-SID .
SELECT-OPTIONS C004 FOR /BI0/SREQUID-SID .
SELECTION-SCREEN   END OF BLOCK B002 .
SELECTION-SCREEN BEGIN OF BLOCK B003 WITH FRAME TITLE T003 .
SELECT-OPTIONS C005 FOR /BI0/SDATE-DATE0 .
SELECTION-SCREEN   END OF BLOCK B003 .
SELECTION-SCREEN BEGIN OF BLOCK B004 WITH FRAME TITLE T004 .
SELECT-OPTIONS C006 FOR /BI0/SUNIT-UNIT .
SELECTION-SCREEN   END OF BLOCK B004 .
SELECTION-SCREEN BEGIN OF BLOCK B005 WITH FRAME TITLE T005 .
PARAMETERS L_PA TYPE DBMAN_PARALLEL_DEGREE DEFAULT '01'.
DATA L_P1(1) TYPE C.
PARAMETERS L_NL TYPE DBMAN_NO_LOGGING AS CHECKBOX DEFAULT ' '.
PARAMETERS L_SR TYPE DBMAN_SHOW_REPORT AS CHECKBOX DEFAULT ' '.
SELECTION-SCREEN   END OF BLOCK B005 .
generated body from i_t_body
generated INITIALIZATION from i_t_init
                         and i_t_seltexts
                         and i_batch_allowed
                         and i_datatarget
INITIALIZATION.
T001 = 'product'.
T002 = 'Data Package'.
T003 = 'Time'.
T004 = 'Unit'.
T005 = 'Options'.
SELECTION-SCREEN FUNCTION KEY 1.
MOVE 'Execute in Bckgrnd' TO SSCRFIELDS-FUNCTXT_01.
PERFORM RESTRICT_SEL_OPTIONS(SAPLRSDRD).
SET TITLEBAR 'SELECTION' OF PROGRAM 'SAPLRSDRD' WITH
' Delete selected entries from the data target DELETE '.
L_S_SELTXT-NAME = 'C001'.
L_S_SELTXT-KIND = 'S'.
L_S_SELTXT-TEXT = 'Base Code'.
APPEND L_S_SELTXT TO L_T_SELTXTS.
L_S_SELTXT-NAME = 'C002'.
L_S_SELTXT-KIND = 'S'.
L_S_SELTXT-TEXT = 'Change Run ID (SID)'.
APPEND L_S_SELTXT TO L_T_SELTXTS.
L_S_SELTXT-NAME = 'C003'.
L_S_SELTXT-KIND = 'S'.
L_S_SELTXT-TEXT = 'Record type (SID)'.
APPEND L_S_SELTXT TO L_T_SELTXTS.
L_S_SELTXT-NAME = 'C004'.
L_S_SELTXT-KIND = 'S'.
L_S_SELTXT-TEXT = 'Request ID (SID)'.
APPEND L_S_SELTXT TO L_T_SELTXTS.
L_S_SELTXT-NAME = 'C005'.
L_S_SELTXT-KIND = 'S'.
L_S_SELTXT-TEXT = 'Calendar Day'.
APPEND L_S_SELTXT TO L_T_SELTXTS.
L_S_SELTXT-NAME = 'C006'.
L_S_SELTXT-KIND = 'S'.
L_S_SELTXT-TEXT = 'Unit of measure'.
APPEND L_S_SELTXT TO L_T_SELTXTS.
L_S_SELTXT-NAME = 'L_PA'.
L_S_SELTXT-KIND = 'P'.
L_S_SELTXT-TEXT = 'Parall. deg. during reconstruc'.
APPEND L_S_SELTXT TO L_T_SELTXTS.
L_S_SELTXT-NAME = 'L_NL'.
L_S_SELTXT-KIND = 'P'.
L_S_SELTXT-TEXT = 'Switch off logging drng recons'.
APPEND L_S_SELTXT TO L_T_SELTXTS.
L_S_SELTXT-NAME = 'L_SR'.
L_S_SELTXT-KIND = 'P'.
L_S_SELTXT-TEXT = 'Display generated report'.
APPEND L_S_SELTXT TO L_T_SELTXTS.
generated AT SELECTION-SCREEN OUTPUT from i_sel_repid
AT SELECTION-SCREEN OUTPUT.
CALL FUNCTION 'SELECTION_TEXTS_MODIFY'
     EXPORTING
          PROGRAM                     = 'GP457FUV92GJS4663HYHXLYC9Q7'
     TABLES
          SELTEXTS                    = L_T_SELTXTS
     EXCEPTIONS
          PROGRAM_NOT_FOUND           = 1
          PROGRAM_CANNOT_BE_GENERATED = 2
          OTHERS                      = 3.
generated AT SELECTION-SCREEN
AT SELECTION-SCREEN.
CASE SSCRFIELDS-UCOMM.
WHEN 'ONLI'.
    L_INTERACTIVE = RS_C_TRUE.
WHEN 'OPTI'.
WHEN 'DELS'.
WHEN 'FC01'.
    L_INTERACTIVE = RS_C_FALSE.
    SSCRFIELDS-UCOMM = 'ONLI'.
WHEN 'OTHERS'.
ENDCASE.
generated END-OF-SELECTION from i_t_selopt
                           and i_del_repid
                           and i_datatarget
                           and i_gen_mode
END-OF-SELECTION.
IF NOT C001[] IS INITIAL.
CLEAR L_SX_SEL.
L_SX_SEL-IOBJNM = 'ZTESTBC'.
LOOP AT C001 .
    CLEAR L_S_RANGE.
    MOVE C001-SIGN TO L_S_RANGE-SIGN.
    MOVE C001-OPTION TO L_S_RANGE-OPTION.
    MOVE C001-LOW TO L_S_RANGE-LOW.
    MOVE C001-HIGH TO L_S_RANGE-HIGH.
    MOVE RS_C_TRUE TO L_S_RANGE-KEYFL.
    APPEND L_S_RANGE TO L_SX_SEL-T_RANGE.
ENDLOOP.
INSERT L_SX_SEL INTO TABLE L_THX_SEL.
ENDIF.
IF NOT C002[] IS INITIAL.
CLEAR L_SX_SEL.
L_SX_SEL-IOBJNM = '0CHNGID'.
LOOP AT C002 .
    CLEAR L_S_RANGE.
    MOVE C002-SIGN TO L_S_RANGE-SIGN.
    MOVE C002-OPTION TO L_S_RANGE-OPTION.
    MOVE C002-LOW TO L_S_RANGE-SIDLOW.
    MOVE C002-HIGH TO L_S_RANGE-SIDHIGH.
    MOVE RS_C_FALSE TO L_S_RANGE-KEYFL.
start change
    DESCRIBE FIELD C002-LOW TYPE l_type.
    IF l_type = 'I'.
      CONDENSE L_S_RANGE-LOW.
      CONDENSE L_S_RANGE-HIGH.
    ENDIF.
stop change
    APPEND L_S_RANGE TO L_SX_SEL-T_RANGE.
ENDLOOP.
INSERT L_SX_SEL INTO TABLE L_THX_SEL.
ENDIF.
IF NOT C003[] IS INITIAL.
CLEAR L_SX_SEL.
L_SX_SEL-IOBJNM = '0RECORDTP'.
LOOP AT C003 .
    CLEAR L_S_RANGE.
    MOVE C003-SIGN TO L_S_RANGE-SIGN.
    MOVE C003-OPTION TO L_S_RANGE-OPTION.
    MOVE C003-LOW TO L_S_RANGE-SIDLOW.
    MOVE C003-HIGH TO L_S_RANGE-SIDHIGH.
    MOVE RS_C_FALSE TO L_S_RANGE-KEYFL.
start change
    DESCRIBE FIELD C003-LOW TYPE l_type.
    IF l_type = 'I'.
      CONDENSE L_S_RANGE-LOW.
      CONDENSE L_S_RANGE-HIGH.
    ENDIF.
stop change
    APPEND L_S_RANGE TO L_SX_SEL-T_RANGE.
ENDLOOP.
INSERT L_SX_SEL INTO TABLE L_THX_SEL.
ENDIF.
IF NOT C004[] IS INITIAL.
CLEAR L_SX_SEL.
L_SX_SEL-IOBJNM = '0REQUID'.
LOOP AT C004 .
    CLEAR L_S_RANGE.
    MOVE C004-SIGN TO L_S_RANGE-SIGN.
    MOVE C004-OPTION TO L_S_RANGE-OPTION.
    MOVE C004-LOW TO L_S_RANGE-SIDLOW.
    MOVE C004-HIGH TO L_S_RANGE-SIDHIGH.
    MOVE RS_C_FALSE TO L_S_RANGE-KEYFL.
start change
    DESCRIBE FIELD C004-LOW TYPE l_type.
    IF l_type = 'I'.
      CONDENSE L_S_RANGE-LOW.
      CONDENSE L_S_RANGE-HIGH.
    ENDIF.
stop change
    APPEND L_S_RANGE TO L_SX_SEL-T_RANGE.
ENDLOOP.
INSERT L_SX_SEL INTO TABLE L_THX_SEL.
ENDIF.
IF NOT C005[] IS INITIAL.
CLEAR L_SX_SEL.
L_SX_SEL-IOBJNM = '0CALDAY'.
LOOP AT C005 .
    CLEAR L_S_RANGE.
    MOVE C005-SIGN TO L_S_RANGE-SIGN.
    MOVE C005-OPTION TO L_S_RANGE-OPTION.
    MOVE C005-LOW TO L_S_RANGE-LOW.
    MOVE C005-HIGH TO L_S_RANGE-HIGH.
    MOVE RS_C_TRUE TO L_S_RANGE-KEYFL.
    APPEND L_S_RANGE TO L_SX_SEL-T_RANGE.
ENDLOOP.
INSERT L_SX_SEL INTO TABLE L_THX_SEL.
ENDIF.
IF NOT C006[] IS INITIAL.
CLEAR L_SX_SEL.
L_SX_SEL-IOBJNM = '0UNIT'.
LOOP AT C006 .
    CLEAR L_S_RANGE.
    MOVE C006-SIGN TO L_S_RANGE-SIGN.
    MOVE C006-OPTION TO L_S_RANGE-OPTION.
    MOVE C006-LOW TO L_S_RANGE-LOW.
    MOVE C006-HIGH TO L_S_RANGE-HIGH.
    MOVE RS_C_TRUE TO L_S_RANGE-KEYFL.
    APPEND L_S_RANGE TO L_SX_SEL-T_RANGE.
ENDLOOP.
INSERT L_SX_SEL INTO TABLE L_THX_SEL.
ENDIF.
L_PARALLEL = L_PA.
IF L_INTERACTIVE EQ RS_C_TRUE.
CALL FUNCTION 'RSDRD_SEL_DELETION'
       EXPORTING
            I_DATATARGET   = 'DELETE'
            I_THX_SEL           = L_THX_SEL
            I_AUTHORITY_CHECK   = RS_C_TRUE
            I_NO_LOGGING        = L_NL
            I_PARALLEL_DEGREE   = L_PARALLEL
            I_SHOW_REPORT       = L_SR
       CHANGING
            C_T_MSG             = L_T_MSG.
ELSE.
    CALL FUNCTION 'RSDRD_BUILD_REPORT_FOR_BATCH'
         EXPORTING
          I_REPID        = 'GP457FWJUK1J1F3ZIZZOEH9U533'
          I_DATATARGET   = 'DELETE'
          I_GEN_ONLY          = RS_C_FALSE
          I_THX_SEL           = L_THX_SEL
          I_AUTHORITY_CHECK   = RS_C_TRUE
          I_NO_LOGGING        = L_NL
          I_PARALLEL_DEGREE   = L_PARALLEL
          I_SHOW_REPORT       = L_SR
     CHANGING
          C_T_MSG             = L_T_MSG.
ENDIF.
Thanks in advance,
Vijaya

hi!
Function code for execute button is 'ONLI'.
try ur code using it!!
Reward points if it helps.
Regards,
Neha Bansal.
Message was edited by:
        Neha Bansal

Another user has changed the row with primary key oracle.jbo.Key HELP

I created VO which based on two entities. Then user search from that VO, when result comes update two row of each entity .
HERE my function
public String lockPayment() {
getAppImpl().getcheckPaymentsVO1().setRangeSize(-1);
Row[] rw2 = getAppImpl().getcheckPaymentsVO1().getAllRowsInRange();
checkPaymentsVORowImpl tparow;
tparow = null;
for (int j = 0; j < rw2.length; j++) {
tparow = (checkPaymentsVORowImpl)rw2[j];
// tparow.setApayLock("1");
tparow.setAtaxLock("1");
BindingContainer bindings = getBindings();
OperationBinding operationBinding = bindings.getOperationBinding("Commit");
Object result = operationBinding.execute();
if (!operationBinding.getErrors().isEmpty()) {
return null;
return null;
When I click it gives me error:
----------> Another user has changed the row with primary key oracle.jbo.Key
Any suggestion !!!!!!
Edited by: 903927 on Dec 14, 2012 1:00 AM

Hi,
see this: https://blogs.oracle.com/onesizedoesntfitall/entry/the_case_of_the_phantom
Frank

Key mapping/ remote key

Hi All,
I have some understanding of key mapping internal functionality.
my question is ... should I use this key mapping feature from all look up tables, main table while importing from remote systems?
should all my feilds have REMOTE KEY enabled.
Lets say I have loaded data into my repository from 3 different remote systems(R1,R2,R3) using remote key feature.
Now, I want to see all the records that belong to R1 only or R2 only?
Can this be seen using remote mapping feature? or how can I see only specific records for one remote system.... should i create another field that identifies the source and just map it? ....... generally how do we handle this?
Also, have uploaded the data for my lookup table DIVISIONS,when i try syndicating it for remote R1......
in my destination preview i can see some records that belong to only R2 and R3 also. I mean I am not able to see only the
records belong to R1 system.
I mapped
division <-> div
desc     <-> desc
there are two more keys like remote key, v...... Should I also map these keys?
Pls let me know,
Thanks & regards,
Vee

Hi,
my question is ... should I use this key mapping feature from all look up tables, main table while importing from remote systems?
should all my feilds have REMOTE KEY enabled.
1. It is totally dpeend upon business requirement which table you want to make remote enable.
    The main reason to use remote key is to syndiacte the data to remote system specific.
     So if you are syndication your subtables to then it is good to make remote key enable.
2. Only tables are remote key enabled not the fields.
Lets say I have loaded data into my repository from 3 different remote systems(R1,R2,R3) using remote key feature.
Now, I want to see all the records that belong to R1 only or R2 only?
Can this be seen using remote mapping feature? or how can I see only specific records for one remote system.... should i create another field that identifies the source and just map it? ....... generally how do we handle this?
This is not possible as standard way.
But workaround is when you map the source field to remote key at destination side in import manager,just make the clone of source field and map it to the new fields to store the system from where the records came.
So in data manager you can search on this field to see only records that is specific to some remote system.
Also, have uploaded the data for my lookup table DIVISIONS,when i try syndicating it for remote R1......
in my destination preview i can see some records that belong to only R2 and R3 also. I mean I am not able to see only the
records belong to R1 system.
I mapped
division <-> div
desc <-> desc
there are two more keys like remote key, v...... Should I also map these keys?
Yes you have to map these fields as well.
Even after mapping this option if you want to syndicate all the remote system records then there is option "override remote keys".after enabling this option there is record generated for each remote system.
hope it helps you.
Thanks,
Sudhanshu

Function key to execute key-f5 trigger

Similar Messages

Maybe you are looking for