Function Keys - Icons Missing

How Do Everyone!
I have amended an exitsing ABAP report which displays
information via an ALV grid
i.e. FM 'REUSE_ALV_GRID_DISPLAY'.
It uses the logical database PCH. When the report is
displayed the icons - SAVE layout and SELECT layout
are both missing. But the icon for CHANGE - layout is
displayed.
Does anybody know how I get get the missing icons
(SAVE layout and SELECT layout)to be displayed.
Thanks
Andy

Hi,
Use the parameter I_SAVE and pass the value as 'A' to get the save layout button in the output.
THanks,
Naren

Similar Messages

Use Function Keys as Standard Function Keys checkbox missing

Is there a reason the "Use Function Keys as Standard Function Keys" checkbox is missing in my Keyboard/Mouse settings?

Just go to the Keyboard shortcuts tab and uncheck the items assigned to the function keys or assign them to different keys.

"Use all F1, F2, etc. keys as standard function keys" checkbox missing in System Preferences/Keyboard since upgrade to OS X 10.9.5

Since the last update to OS X 10.9.5, I no longer have a checkbox to use all F keys as standard function keys. I've looked for any other possible solutions but can find none. I have the 2007 aluminum keyboard (three batteries) with the latest firmware upgrade.
Thanks.

Thanks BDAqua...sure looked like the function had disappeared over time and appreciate the confirmaion. Hard to understand why a function like that would be taken away. The program I run uses function keys f3,f7,f11 and f23(shifted f11) and I have all working okay by turning them off in keyboard and mouse menus. The f23 is causing issued in that when I use shifted f11 the screen scrolls upward instead of passing along the f23 function. Looks like I will have to work around this since the operating system will not allow the function keys to just work "standard"...thanks by the way for the welcome...!!

Function keys on the screen

hi folks,
I have a question, I created a new function key called 'display' for the screen using the menu painter used that in the program and executed the program successfully in DEV environment. when I moved the changes (moved all) to QAS the function key 'display' did not show up. I checked to see that the function key item got moved using the menu painter in QAS. The item is there in QAS amd checked for the changes in the program using version management. no changes How come the function key is missing on the screen in QAS?
Am I missing anything here?
Thanks,
SK

If you activate your program after you've made your screen changes, sometimes you lose those screen changes. You may need to go back in to the screen and reactivate, then transport it. If necessary, make a small change (like adding a blank line somewhere in the flow logic of the screen) in order to get the screen changes into a transport. I hope this helps.
- April King

Disable the need of the function key when using the control key

I'm often using the F1-12 keys when using an IDE for developing. Those IDE's use the CTR+F1-12 shortcuts quite a bit and it's always needed to use FN+CTR+F1-12 which is ridiculous and redundant. Is there a way to keep using the functions assigned to F1-12 (Adjust volume, brightness...) without pressing the function key and be able of using CTR or ALT +F1-12 without the need of pressing the function key?

According to the system help text it is possible. And for me it works as described in the help text on my MacBook Pro.
But on my Mac Pro (late 2013) the relevant control (“Use all F1, F2, etc. keys as standard function keys”) is missing form System Preferences >> Keyboard >> Keyboard.
From the help text for the topic "Use keyboard function keys:"
If you frequently use the alternate function of a function key, you can switch the keyboard so that the function keys perform the alternate function without your pressing Fn. You then hold down Fn to use a function key’s original hardware control function. If your keyboard doesn’t have an Fn key, try holding down the Control key.
Choose Apple menu > System Preferences, then click Keyboard.
Open Keyboard preferences
Select the “Use all F1, F2, etc. keys as standard function keys” checkbox.

5800: apps missing / won't run / "key icon" overla...

A few apps went missing on my 5800, also under Application manager. They're on the SD, and I think all Java. Some apps also started showing a small key icon overlayed at the corner of each app's icon. These apps can't be run.
A restart didn't help, nor a restart without the card and a live reinsertion. After another restart the key icon overlays disappeared but these apps still won't run. They could only be reinstalled after an uninstall, but those that disappeared are stuck in limbo.
Besides the above, one app that was preloaded on the card now has an empty icon, and after two restarts its name shows as a 9 digit number (see below). It can't be run.
All of this on firmware v31. As far as I can tell I didn't do anything to trigger it.
Are there any non-destructive ways to fix it?
Is there a way to use Symbian without all these strange problems popping up all the time (with the usual solution seemingly being total reset/format)?

ur symptoms lead to a diagnosis of corrupt memory card.. Have u installed any of those java programs from free game sites tht, while installin, says ur phone could be harmed? Coz those java games r a bit unstable on nokia5800.. I knw it shouldn't be.. But... It is.. Sometimes there's a read/write error and then they show key icons..
Whatever to solve this, do this..
Connect with computer
When asked choose mass storage mode
Open my computer
U'l find ur memory card listed
Right click, goto properties
There's an option for check disc for errors
Select tht and let it scan and fix errors
After u r done, see if u can uninstall those in limbo.
If not connect again in mass storage mode
Go to ur computer settings and as to show hidden files, and also show important windows files
Open ur memory card
U'l find a FOUND.000 folder.. Delete it
It's unusable by symbian os and it takes on space
Restore ur hidden file settings to normal.
Hope this helps..
Regards,
Dr. Shoubhik

T530 - Is there a way to program the "Fx" function keys to do what missing keys did?

T530 - Is there a way to program the "Fx" function keys to do what missing keys did? Print screen Break, etc? Running Windows 7 Professional

Hi,
Welcome to Lenovo Community Forums!
Check in BIOS -> config -> Keyboard if there is an option to switch between default and legacy mode.
If you don’t find that option, you may try the Fn+esc combination that changes the function keys to legacy mode, but when the computer reboots, it might reset back to a default mode and you have to use Fn+esc again.
Hope this helps!
Best regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

The password key icon is missing at the corner of the navigation bar...how do i get it back??

they key icon is no longer where it should be in order to save and remember passwords. cant find it anywhere

There is no Password key icon in Firefox Navigation Toolbar items. You must be using some add-on in which case the icon might be on the Add-on Bar
What is the Add-on Bar?
* https://support.mozilla.com/en-US/kb/what-add-bar
You can Customize the Add-on Bar to Drag/Drop your Password icon on the Navigation Toolbar
How do I Customize the Toolbars?
* https://support.mozilla.com/en-US/kb/how-do-i-customize-toolbars
Check and tell if its working.

Upgraded to mavericks now some function controls are missing e.g. no add icon in reader

i upgraded to mavericks and now some function controls are missing e.g. add - clear etc. missing in reading list .anyone help?

You may find these articles useful:
http://support.apple.com/kb/PH14176
https://discussions.apple.com/docs/DOC-6162
Ciao.

Apple external keyboard function key missing?

Hi - I have the new aluminium external keyboard (UK english, wired, full size with numeric keypad) and I notice that it doesn't have a Fn modifier key.
I have configured OS X on my MBP to use F1, F2, etc as standard function keys, requiring me to hold down Fn + key on the MBP to adjust brightness, volume, etc.
But on the external keyboard, due to the lack of an Fn key, I cannot control brightness, volume, etc. Is there any key combination I should be using to get the same effect?

The FN key is just below the F13 key on the full keyboard.

Apple keyboard software overrides QuarkXpress function keys

HELP
I recently installed Tiger 10.4.11 update, and the apple keyboard software update 1.2 for use with a new Apple keyboard. However, in QuarkXpress 6.5, now the function keys F7 and up do not work in Quark — presumably because they are being used by the keyboard software. I presumed when an application was running (e.g., Quark) IT would override. I need my F7 key in Quark!
Is there a way to make the application take precedence? Or, is there a way to disable or uninstall the apple keyboard software? The function keys for use with itunes and dashboard, etc. are far less important to me than having the function keys available in software I use daily for work.
Thanks so much!
jelcroy

Thanks for the reply — I tried that, which seemed the obvious solution, but I cannot find the place to change that — it is NOT in the keyboard shortcut list in the keyboard preferences.
The F7 thru F9 keys on the new keyboard control playback, which I presume to be itunes and\or DVD player, judging from the icons on those keys.
Haven't found a place to disable them. In adding apps in the keyboard shortcuts, which I tried, it doesn't allow for the key combinations needed to restore the Quark functionality I am missing since the keyboard software update, which I wish I hadn't done. There's not enough functionality in the keyboard that isn't available in a myriad of other ways to make it worthwhile, especially when it means giving up the convenience if those commands in Quark, which is where I spend the majority of my time.
Anyone have other ideas? Can the Apple keyboard software be uninstalled or disabled?
BTW, the control F1 command to turn off keyboard access doesn't work either.

[SOLVED] Function Keys Problem On Dell Inspiron N5010

Yesterday I bought a new laptop (Dell Inspiron N5010) and immediately installed Arch Linux on it. But when I launched the installation framework, I needed to use fdisk to partition my drive manually and to open another tty, ctrl + alt + f2 or up to f7, none of them worked. When I use f4 or f5 for example, it changes the brightness of the screen cause these keys have icons on them which represent the brightness control. So I quitted, took care of that fdisk issue and got back, installed Arch Linux successfully. When launched in GNOME 3, nothing was changed. It still uses f1, f2, ... and so on as "just function keys" without using "Fn" key. It's fine somehow cause my system automatically detected those keys, I can use every single function of my keyboard. But without using Fn key, I can't actually use any fx key for my own use. For example, I can't use Tilda anymore cause when I use only f1, it tries to open monitor control stuff.
So... any ideas?
Edit: It seems that this problem is all about Arch Linux. A friend of mine has the same laptop and he has just tried Mint Debian RC and function keys worked properly. So, there's a problem and it seems it's related to Arch Linux (or maybe Xorg version, somehow?).
Last edited by Jeaquares (2011-05-18 13:07:06)

xdunlapx wrote:The function key on my dell laptop was set to the F keys, meaning you have to hit the function key and then an F key to activate the F key. I switched it in the bios so I don't have to hit the function key to activate the F keys. So I would have had to hit Fn+Ctrl-Alt-F1 for example to get to TTY 1. Now since i switched it off in the bios All I have to do is hit Ctrl-Alt-F1 to get to the terminal. But in order to turn off wifi from the F key (for example) I have to hit Fn+F2. It's switched.
I can't tell you how this was helpful. I've never noticed that there was an option in BIOS's Advanced menu for this. I updated it as "Function Key" and it solved my problem, thanks.

X1 Carbon 2014 Function keys not working in windows7

Hello.
I have a brand new X1 carbon(model: 20A7-005KMD) that was installed with our company image, running windows 7.
Alle drivers in device manager has been installed, and system update is updated.
The carbon has the "touch" function keys and they only partly work.
When booting the computer i can swap between the different functions, but when i get into windows, its is "stuck" with only the options F1-F12. The F keys work, but i cant change settings by pressing the FN key on the left side og the touch display, and get sounds/brightness settings etc.
as said, this works just fine during the boot.
Any ideas what can be causing this and even more important - a fix?

Hi Guys,
We are currently having the same issue on the X1 Carbon 20A7 models (20A7000LAU). In BIOS or during boot the function changing works without issue (limited to two (2) function screens how-ever), it stops working once you log in. If you then lock the computer you can change the functions, but then once you unlock the device, it stops working.
When the drivers are installed and the device is restart we get the above behaviour, if we uninstall the drivers the function keys will function as expected till the device is restarted. This is very strange behaviour.
On a device received by Lenovo there are 4 function changes/screens in total, we can only make two work temporarily as listed above. We have tried the following.
1. MDT 2013 Delivered Windows 8.1 x64 image image. All drivers/software components installed from the lenovo website. We receive above issue and cannot resolve by uninstall/reinstalling.
2. Vanilla Windows 8.1 ENT x64 image installed from Microsoft Volume Licensing portal, installed all drivers supplied from the Lenovo Website. The same behaviour is seen as above and is reproducable.
3. We have als compared all drivers/software installed on the factory supplied model to a manually built device, still the above behaviour is witnessed.
4. We have manually exported drivers from the X1 Carbon device from lenovo and injected them into the vanilla Windows 8.1 ENT or PRO newly imaged device, still the same behaviour above.
Please let me know what I'm missing, I'm certain this is a bug in the drivers for this model.
Regards,
Nic

Function keys not working in XP under Boot Camp

I have a slight problem with Boot Camp with XP.
When I first installed it long ago, I recall there was a Boot Camp icon in the Windows tool bar, and the function keys could be used to change the volume, brightness, and keyboard backlight. Now, there isn't, and they don't.
I've run 'repair' from the Leopard DVD, but still the functionality hasn't returned. This is particularly irritating within a game because I can't even change the volume without quitting to desktop.
Note that the Boot Camp partition is also used by Parallels, just in case that's a factor. Other than that, I can't think what it was I might have done to have caused whatever Boot Camp installed to facilitate this functionality, be removed/disabled.
Any ideas how I can repair it without starting again from scratch?

I'm having similar issues with no real luck. The only 'solution' I've found is to manually start the KbdMgr.exe program each and everytime I turn on Windows. The program is in the Bootcamp folder, and I put a shortcut on my desktop.
KbdMgr is set to start with Windows, but it doesn't. I've even done a repair install of Windows, removed and reinstalled Bootcamp drivers with no success. I can't find an actual solution anywhere, just workarounds.

Keyboard Function-Key mapping in Forms 10gAS

Greetings,
Can anyone help with a quick outline of the way keyboard function keys are implemented on the Application Server in Forms 10g?
My situation is that I have two unix servers, one for Development, one for Production. When running my Forms from a browser window, one of the servers responds to the F8 key for Execute-Query, the other server does not.
I presume the mapping is done on the server, with some sort of configuration file. Perhaps something's been overridden by mistake somewhere. I have checked forms.conf, forms.properties, formsweb.cfg and frmweb.res, and cannot see anything that might relate to these Keyboard Function-Key settings. I've also tried finding a Developers Reference Manual online, but have had no luck.
It's bound to be something really simple, but I can't seem to crack it. Do you know what I'm missing?
Pete ?:|

There are two basic versions of key mapping fmrweb.res files. Forms is released with a fmrweb.res file that has Ctrl+S for commit.
But there is also a fmrpcweb.res file that can be used in place of the other -- you just rename it as fmrweb.res in the other's place.
Both files are simple text files you can edit with Notepad or other simple text editors.
You can find more about fmrweb.res in the first post (a ways down) in this thread:
Forms 10g installed and running on Windows Vista

Function Keys - Icons Missing

Similar Messages

Maybe you are looking for