Function keys status is not showing on screen

Hi... please help me. I m havin lenova ideapad s10-2 netbook. In this when i press fn + function keys action is performing but its status is not displaying on screen. So if i want to switch on WLAN when i press fn+F5 screen is not showing. Also usb devices are not detecting my laptop. Please help me out.......
Thanks
Solved!
Go to Solution.

shiva2shetty wrote:
Thanks 4 information. I will try it. Also QS (Quick start) and "one key recovery" is not working when OS is loaded. I need to open from start menu. After that only QS and Function key status display are working. So can you tell me how to load these twodefault when OS boots.
Thanks
Hi for Qucikstart ... if there is still installed .. you could activate in in two ways... Start Computer press immidiate F2 for BIOS in move with arrow keys to CONFIG Page there you could found Quickstart set to enable... leave with press F10 save and exit...
or in windows XP start control panel you found QUICKSTART Configuration Tool click on this program you could activate at startup save and exit...
Or if Quickstart is not installed .. download from here S10-2 Driver Site
there you can also found OKR
sincerely KalvinKlein
by the way ... did you re-install the system ? which OS did you use? , you didnt say that in your first post ... that sounds to me that you try to re-install or use an old XP without SP3 ....
To fulfill your quest here is the driver page... for all ... pick your S10-2 OS drivers and install at first the chipset driver...
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Similar Messages

My iphone is gray or black it is functioning but you can not see the screen so I can not call or text or anything

My iphone is gray or black it is functioning but you can not see the screen so I can not call or text or anything, I have a child that is very ill and I have to have access to a phone at all times can someone help me? It happened one other time when I plugged it in to my to listen to music. I know it is working it said something on voice control. I tried the press the circle button and the top button but the screen only turned white?

Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

Hi, i am having a problem in my ipad 2 , it is not showing main screen just showing a black blank screen in which downloading icon is only shwn which is continously and when i connect to itunes via windows 7 it showing this error (0xE8000065) can any one

hi, i am having a problem in my ipad 2 , it is not showing main screen just showing a black blank screen in which downloading icon is only shwn which is continously and when i connect to itunes via windows 7 it showing this error (0xE8000065) can any one

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

My large monitor is not showing the screen of my MAC airbook on it. All cables are hooked up. I reset the pram and still not working. Message on black monitor says"check signal cable...?

My large monitor is not showing the screen of my MAC airbook on it. All cables are hooked up. I reset the pram per the instructions I received at the MAC store and the monitor is still not working. Message on blacked out monitor says"check signal cable". All cables are attached and monitor and MAC are both plugged into power source...Help ?

Go to System Preferences, Display. Click on dectect displays.

AIM html status code not showing away with iChat

Anyone else have issues with the html status code not showing away when you are away with iChat?
Here is the code I am using: <a href="aim:goim?screenname=markformac" title="markformac"><img src="http://big.oscar.aol.com/markformac?onurl=http://www.exploitmymac.com/manual/aimon2.gif&offurl=http://www.exploitmymac.com/manual/aimoff2.gif" alt="iChat Status" /></a>

HI Mark
Tagless
open tag a href="aim:goim?screenname=ralphjohnsr&message=Hi!,+I+came+from+your+website,ralphjohnsuk."close tag open tag img align="right" src="http://big.oscar.aol.com/ralphjohnsr?onurl=http://www.ralphjohnsuk.dsl.pipex.com//css/Resources/RalphOn.gif&offurl=http://www.ralphjohnsuk.dsl.pipex.com//css/Resources/RalphOff.gif" alt="Webmaster iChat Online Status Indicator" border="0" align="bottom" close tag open tag /a close tag
I have mine sent to give me a message when people use it, where as you have yours titled.
9:13 PM Friday; May 12, 2006

Itouch goes through restore process then will not show home screen

itouch goes through restore process then will not show home screen. Only apple logo shows and flashes periodically.

- Try:
iOS: Not responding or does not turn on
- If not successful and you can't turn the iPod fully off, let the battery fully drain. After charging for at least an hour try the article again.
- If still problem that indicates a hardware problem and an appointment at the genius Bar of an Apple store is in order.

Strange Keyboard Behaviour: Function Keys F1-F10 not accessable

I noticed couple a days ago that function Keys F1-F10 not accessable, neither with nor without fn.
Nothing special has been made lately on PowerBook, some days ago tested Universal Access.
What could keep F1-F10 disabled?
BTW F11 and F12 are fully functional

I'm noticing a possibly related conflict: I use Universal Access Sticky Keys all the time (they are just handy). But I noticed after a few days working with my new intel MacBook that when I had sticky keys on the keyboard would be mapped weird: The qwerty keys would be correct up to the num lock keys, and they would be numbers. So they are like this:
qwerty456*[]
asdfgh123-'
zxcvbn0,.+
After several days of removing preference panes and startup items with no success, I just started digging around in all the preferences I could think of that would effect the keyboard. I disabled the "use the f1-f12 keys" option and the keyboard behaved normally.
So, if you engage sticky keys AND have "Use the F1-F12 keys . . ." engaged you get this odd behavior.
However, I still have the function of the F-keys.
Any ideas?

What causes iphone 3gs every time I insert the SIM card does not show the screen or no service?

what causes iphone 3gs every time I insert the SIM card does not show the screen or no service?

If the iPhone was unlocked unofficially, it has been locked to original carrier again.

Not showing Variable screen in Workbook - Refresh

Hi BW Experts,
I am working on BI 7.0
When I try to refresh Workbook in Analyzer it is refreshing the query giving current data, but it is not showing Variable screen.
What should I do to open variable screen when I click on Refresh button in Workbooks.
Kindly advise.
Ram,

You should click the 'refresh variable values' button.
Also switch on the 'process variables on refresh' in the workbook properties.

Suddenly - and for no reason that I can think of - my keyboard does not show on screen what I am typing. In other words it is gibberish.

Suddenly - and for no reason that I can think of - my keyboard does not show on screen what I am typing. In other words it is gibberish. This is only happening in browsers (Firefox and Chrome) but is OK in Word, Excel etc
This has just started today; yesterday, I downloaded a Zone Alarm update which was genuine and I have done a full scan for virus and malware – nothing!
I have tried the FN+NumLock idea which I saw on the internet but that doesn’t seem to work.
Any ideas?

Do a malware check with some malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

TS3694 i think itunes has removed my iphone software. because now not showing home screen. when i tried to restore my phone there generated an error no is 1015. please help me how can i recover my iphone again?

i think itunes has removed my iphone software. because now not showing home screen. when i tried to restore my phone there generated an error no is 1015. please help me how can i recover my iphone again?

From the article which you posted your question from:
Errors related to downgrading iOS
The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

Menu bar does not show on screen?

Menu bar does not show on screen.

I'll assume your profile is wrong (10.4.7?) and you are using Lion in full screen mode. If so click the double arrows in the menu bar which should appeare if you mouse into the menu bar area.
If that isn't the case then are you zoomed in? Contol + fingler drag on mouse (or scroll wheel) zooms in or out (see Mouse preferences, Screen Zoom, look at the little movie).

Function keys F1 - F10 not working in any case

Hello, I've a problem with my MacBook Pro 15" 10.4.11. Function keys f1-f10 don't work for brightness, volume etc. I remember that the bloc num F6 key became light green when pressed. Now it seems stuck and doesn't work at all. Then f12 activate dashboard and f11 exposeé. I tried everything, it's not a system pref issue....Help!!!
Thank you a lot!

So with the room lights off, after hitting F10 to bring the keyboard backlight up, F9 does not bring it down?
One more thing to try is System Preferences > Keyboard & Mouse > Keyboard Shortcuts tab and click the Restore Defaults button, in case some remapping was done.
If the answer to the first question is yes, and the suggestion above doesn't help, it's starting to sound like a hardware problem.
You can test that by doing the following: System Preferences > Keyboard & Mouse > Keyboard tab and check the box to "Use F1...". Then, go to System Preferences > International > Input Menu tab, and check the box next to Keyboard Viewer. A flag will appear in the menu bar, click that and select Show Keyboard Viewer, which brings up a keyboard image that shows keystrokes. See if the Fkeys flash when pressed (note that with the Use F1... box unchecked, they won't flash).

Function key defaults are not working

I've ran into an issue where the default function keys no longer work. The F1 key for instance does not decrease my brightness, nor does F12 increase my volume. All of the function keys will produce a "thump" sound from the Macbook Air, like I've typed a bad keystroke, or an invalid keystroke for a text field.
What I've done:
1. The "Use all F1, F2, etc. keys as standard function keys" is Unchecked in System Prefs
2. Rebooted, and cold booted many times
3. I've reset PRAM and SMC many times (probably 10 each)
4. I've clean installed OSX Mavericks and the stock install shows the same symptoms.
I'm hesitant to believe this to be a hardware issue because the keys themselves will work if I manually set an action for them (a custom shortcut to open an application for instance).
Has anyone else seen a similar problem or know of any other things I can try?

See if a Safe Mode boot helps.
Startup your Mac in Safe Mode
A Safe Mode boot takes longer than a normal boot so be patient.
Once you are in Safe Mode, click Restart from the Apple () drop down menu then try the keyboard.

ICal multi day event not showing on screen

Help ! When using iCal, I am stumped as to how to make multi day events show up on the appropriate days .... I enter an event for say 3 days, on my screen I see it in iCal only on day one, it does not show up on day two or three however when I print my calendar, it does print on all the appropriate days. Is there a setting to change so it shows up on my screen on all the days like it does when I print ? Thanks!

Hi there,
So, that's in Week or Month view you are talking about?? ... it only shows on the first day?
Probably stating the obvious, but I'm assuming you are ticking the "All Day" box when you enter the Event?
If you don't, but leave a time, say 10pm, and have a start date of the 18th and an end date of the 20th, say - it'll display only on the 18th (albeit with the 10pm time slot - not as an all day Event), but will print on all three days - ie 18/19/20th

Function keys status is not showing on screen

Similar Messages

Maybe you are looking for