Function Mod:RSSEM_CONSOLIDATION_INFOPROV vs RSSEM_CONSOLIDATION_INFOPROV3
Hi All,
Please help me on the following..
1.0 Please advise on the advantages of using
Can we create or delete indexes on BPS cube(Transactional).
2.0 Advantages of using the function module: RSSEM_CONSOLIDATION_INFOPROV vs RSSEM_CONSOLIDATION_INFOPROV3 ?
What benefits can we assume from this?
3.0 What are the ways can we improve the virtual cube response time?
Thanks in Advance
S VR
Any Update pls..
It is urgent can anybody help me on this?
Thanks
S VR
Similar Messages
-
Reduced Functionality Mode - Office 2013
Is it possible to force Office 2013 (volume license) into a Reduced Functionality Mode straight away without having to wait out the 30-day trial?
I have a fairly niche application with regular imaging and I'd like my default images to have read-only Office installed. Hardware that needs editing can then have a product key entered to activate and unlock.
ThanksHi,
As far as I know, currently we can't bypass the grace period of the 30-day trial, since the license information is read-only to users.
You may detail your scenario with more information, so that we can possibly provide some other suggestions.
Regards,
Melon Chen
TechNet Community Support -
USB-OTG: Set fix to host- or function-mode
Hi,
is it possible in WEC2013 to decide fix, if a OSB-OTG-port is allowed to be in host- or in function-mode?
Perhaps set it fix in the registry?
Tx
MarkusThe registry setting is as :
IF BSP_USB_HSOTG_CLIENT
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\UsbOtg\USBFN]
"Prefix"="UFN"
"Dll"="usbfn.dll"
"Index"=dword:1
"Order"=dword:22
"MemBase"=dword:xxxxxxx
"MemLen"=dword:xxxxxx
"Irq"=dword:xx
"Priority256"=dword:64
"OTGSupport" = dword:0
"OTGGroup"="01"
"BusIoctl"=dword:2a0048
"IClass"= multi_sz:"{E2BDC372-598F-4619-BC50-54B3F7848D35}=%b","{6F40791D-300E-44E4-BC38-E0E63CA8375C}=%b"
ENDIF BSP_USB_HSOTG_CLIENT
; @CESYSGEN ENDIF CE_MODULES_USBFN
; @CESYSGEN IF CE_MODULES_USBHOST
IF BSP_USB_HSOTG_HOST
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\UsbOtg\Hcd]
"Prefix"="HCD"
"Dll"="hcd_hsotg.dll"
"Order"=dword:15
"Class"=dword:0c
"SubClass"=dword:03
"ProgIF"=dword:20
"MemBase"=dword:xxxxxxx
"MemLen"=dword:xxxxxxx
"irq"=dword:xx
"HcdCapability"=dword:4 ;HCD_SUSPEND_ON_REQUEST
"OTGSupport"=dword:0
"OTGGroup"="01"
"UseExistingSettings"=dword:0
ENDIF BSP_USB_HSOTG_HOST
; @CESYSGEN ENDIF CE_MODULES_USBHOST
--- Misbah
Senior Design Engineer T.E.S Electroni Solutions (Bangalore-India) www.tes-dst.com [email protected] -
ALV Grid Usin Function Modulesshould be Displayed in ALV Grid Function mod
Hi,
I had a requirmentlike SM30 we hav to create initial Screen and wat ever ZXXXX tables we enter it will create Fieldcatalog Dynamically and press dislay it show in display mode.
If we Press Maintain it will Display in Editable Mode.The changed data should be updated into DB.Evrything should be displayed in
ALV Grid Function MOdule..
How to Get value from Screen Field ?
How To Generate Fieldcatalog For that Table dynamically?Hello,
How To Generate Fieldcatalog For that Table dynamically?
Use the FM 'REUSE_ALV_FIELDCATALOG_MERGE' pass the table name in the import param I_STRUCTURE_NAME & you'll get the fiel cat dynamically!
BR,
Suhas -
SSAS 2012 end Excel functions - mode.sngl doesn't work
Since I've used SSAS 2005 with Excel 2007 my Excel.Mode function worked fine.
Now we have migrated to SQL 2012 and we have installed Excel 2010 --> Excel.Mode is deprecated in the new version and the cube calculations that use this function won't work. The new Excel way to calculate mode is [mode.sngl] but I can't call it from cube
calculations.
I tried to replace the Excel approach with the MDX approach (link below) but the time to calculate is too slow.
http://social.msdn.microsoft.com/forums/en-us/sqlanalysisservices/thread/C70DE994-5815-4B30-A10A-81518F784BD2
Can anyone suggest me how to procede?
Thank you in advanceHi Mihai,
as I mentioned before I've tried different approaches (see the link) but I didn't find a good MDX solution to work around this issue.
Fortunately (for me) I have a certainty. The numbers involved in my calculation can only be between 0 and 9. Impossible to have more than 9 (cautionary) delivery (measure.[Num. Consegne]) a day for a product in a shop.
So I can work around in this (unconventional and maybe optimizable) way:
CREATE Hidden [Count_01] = COUNT(Filter(({descendants([C3 Date].[TIME - Calendario Solare].currentmember,[C3 Date].[TIME - Calendario Solare].[Data Solare],SELF)}, [C3 Clienti Gestionali].[Cli - Cliente Principale].&[1]), [Measures].[Num. Consegne] = 1));
CREATE Hidden [Count_02] = COUNT(Filter(({descendants([C3 Date].[TIME - Calendario Solare].currentmember,[C3 Date].[TIME - Calendario Solare].[Data Solare],SELF)}, [C3 Clienti Gestionali].[Cli - Cliente Principale].&[1]), [Measures].[Num. Consegne] = 2));
CREATE Hidden [Count_03] = COUNT(Filter(({descendants([C3 Date].[TIME - Calendario Solare].currentmember,[C3 Date].[TIME - Calendario Solare].[Data Solare],SELF)}, [C3 Clienti Gestionali].[Cli - Cliente Principale].&[1]), [Measures].[Num. Consegne] = 3));
CREATE Hidden [Count_04] = COUNT(Filter(({descendants([C3 Date].[TIME - Calendario Solare].currentmember,[C3 Date].[TIME - Calendario Solare].[Data Solare],SELF)}, [C3 Clienti Gestionali].[Cli - Cliente Principale].&[1]), [Measures].[Num. Consegne] = 4));
CREATE Hidden [Count_05] = COUNT(Filter(({descendants([C3 Date].[TIME - Calendario Solare].currentmember,[C3 Date].[TIME - Calendario Solare].[Data Solare],SELF)}, [C3 Clienti Gestionali].[Cli - Cliente Principale].&[1]), [Measures].[Num. Consegne] = 5));
CREATE Hidden [Count_06] = COUNT(Filter(({descendants([C3 Date].[TIME - Calendario Solare].currentmember,[C3 Date].[TIME - Calendario Solare].[Data Solare],SELF)}, [C3 Clienti Gestionali].[Cli - Cliente Principale].&[1]), [Measures].[Num. Consegne] = 6));
CREATE Hidden [Count_07] = COUNT(Filter(({descendants([C3 Date].[TIME - Calendario Solare].currentmember,[C3 Date].[TIME - Calendario Solare].[Data Solare],SELF)}, [C3 Clienti Gestionali].[Cli - Cliente Principale].&[1]), [Measures].[Num. Consegne] = 7));
CREATE Hidden [Count_08] = COUNT(Filter(({descendants([C3 Date].[TIME - Calendario Solare].currentmember,[C3 Date].[TIME - Calendario Solare].[Data Solare],SELF)}, [C3 Clienti Gestionali].[Cli - Cliente Principale].&[1]), [Measures].[Num. Consegne] = 8));
CREATE Hidden [Count_09] = COUNT(Filter(({descendants([C3 Date].[TIME - Calendario Solare].currentmember,[C3 Date].[TIME - Calendario Solare].[Data Solare],SELF)}, [C3 Clienti Gestionali].[Cli - Cliente Principale].&[1]), [Measures].[Num. Consegne] = 9));
CREATE Hidden [MaxCount] =
max({MEASURES.[Count_01],MEASURES.[Count_02],MEASURES.[Count_03],MEASURES.[Count_04]
,MEASURES.[Count_05],MEASURES.[Count_06],MEASURES.[Count_07],MEASURES.[Count_08]
,MEASURES.[Count_09]});
CREATE MEMBER CURRENTCUBE.[MEASURES].[Moda Consegne __TEST__3]
as measures.MaxCount,
NON_EMPTY_BEHAVIOR = { [Num Consegne] };
CREATE MEMBER CURRENTCUBE.[MEASURES].[Moda Consegne]
as
CASE measures.MaxCount
WHEN MEASURES.[Count_01] THEN 1
WHEN MEASURES.[Count_02] THEN 2
WHEN MEASURES.[Count_03] THEN 3
WHEN MEASURES.[Count_04] THEN 4
WHEN MEASURES.[Count_05] THEN 5
WHEN MEASURES.[Count_06] THEN 6
WHEN MEASURES.[Count_07] THEN 7
WHEN MEASURES.[Count_08] THEN 8
WHEN MEASURES.[Count_09] THEN 9
ELSE NULL END
NON_EMPTY_BEHAVIOR = { [Num Consegne] };
Hope to be helpful.
Regards,
Davide -
How to debug a RFC function mod in background?
Hi all,
I am uploading a file thru a portal application & the output will go to a mail box. Everything happens in background.
First the portal application will call a XI devlopment & then the data processed will call a RFC fun mod and the output is going to a mailbox.
In the function modules, I am getting the errors. Since it is a protal application & it runs in backgrnd, I am unable debug the fun modules. I tried both external break point & internal breakpoints. But I am unable to debug the program.
can anyone help me how to keep external breakpoints & debug it in background?
Thanks,
Vijay.HI ,
you can do Debugging , what you need to do is need not use the login as Public . there will be another group server .
i am sure you are using PUBLIC in this only the front end will work means only inside the sap objects will be stopped . for Portal other thigs you need to take other gropu server .
Your Basis Knows it well ....
Normally , in SAP You will have PUBLIC ,SPACE, MESSAGE ,dialog servers.
Take the last one which will have all facilities ,so that it will stop in the break Points which you kept.
it means the Dialog proces will take care of the screens and also takes Break Point and stops it in sap .
Reward points if it is usefull....
Girish -
Does Labview have function Mod() ?
Hello, everyone,
I am trying to parse an array only for all its odd/even number elements.
I am thinking of use Mod function upon 'iteration' but labview seems have
nothing there.
Does anyone know something about that?
Thanks in advance,
-Kunsheng
Solved!
Go to Solution.Stu Turner wrote:
I found my way to this page because I was looking for a modulus function in the mathematical sense, i.e. In mathematics, the absolute value (or modulus) | a | of a real number is the numerical value of a without regard to its sign.
Interesting. I never heard absolute value be called modulus before. I just hit wikipedia to check. In every sense I've heard of modulus (including a few math and cryptography classes), it is remainder (http://en.wikipedia.org/wiki/Modular_arithmetic).
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
Same functionality as COR6N - through Function Mod - passing Batch Number
Hi All,
We are using function 'BAPI_PRODORDCONF_CREATE_TT' to make a completion confirmation with a goods movement.
We are trying to achieve the same functionality as COR6N.
We enter a proc order, then put a qty into yield, click Goods movement (the matr is batch managed) and then enter a batch (movement type 101 by default). Then save. Everything is ok and is I check in table MSEG there is an entry for the confirmation with the batch I used.
Now, when we try this with the bapi the qty is confirmed but in MSEG the batch that appears is different than the one we passed to the BAPI. This is how we are calling the funciton:
CALL FUNCTION 'BAPI_PROCORDCONF_CREATE_TT'
EXPORTING
POST_WRONG_ENTRIES = '0'
TESTRUN = 'X'
IMPORTING
return = wa_bapiret1
TABLES
timetickets = i_timetickets[]
goodsmovements = i_goodsmovements[]
link_conf_goodsmov = i_link_conf_goodsmov[]
detail_return = li_detail_return[] .
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'
IMPORTING
RETURN = li_ret
i_timeticket one entry with fields informed: orderid, phase, plant, yield
i_goodsmovements one entry with material plant resource stg location, batch, mov type
(values as in COR6N)
i_link_conf_goodsmov[] two cases:
1.if we place an entry such as
i_link_conf_goodsmov-INDEX_CONFIRM = 1.
i_link_conf_goodsmov-INDEX_GOODSMOV = 1.
Then no entry appears in table MSEG, in COR3 delivered qty is not increase but in COR6N the already confirmed quantity IS increase
1.if we place no entry then
Then an entry appears in table MSEG but the batch is not the one in i_goodsmovements, in COR3 delivered qty is increase and in COR6N the already confirmed quantity also increases.
So our problem is that when we use i_link_conf_goodsmov to make the bapi use the batch we specify then it does not seem to work. success is returned from bapi in both cases. Of course we do a commit work immeaditely after the bapi.
I would really appreciate somebody help me out.
BR,
AshwaniGuys please advise on this issue.
Ashwani -
Regarding: RFC Function Mod
Hi all,
Can any body Tell me whats the Difference between Synchroner RFC and Asynchroner
All i KNow is that
Synchroner RFC
CALL FUNCTION func DESTINATION dest
parameter_list.
Asynchroner RFC
2. CALL FUNCTION func STARTING NEW TASK task
[DESTINATION {dest|{IN GROUP {group|DEFAULT}}}]
parameter_list
[{PERFORMING subr}|{CALLING meth} ON END OF TASK].
Can any body Please explain ...
Thanks
Srinivashi,
A remote function call (RFC) is the call of a function module that runs in a different system to the calling program. Although it is also possible to call a function module in the same system as an RFC, normally RFCs are used when the caller and the called function module run in the same system.
In the SAP system, these functions are provided by the RFC interface system. The RFC interface system enables function calls between two SAP systems, or between an SAP system and an external system.
The RFC- interface system is made up of the following interfaces:
Calling interface for ABAP programs
Each ABAP program can call a remote function module using the command CALL FUNCTION...DESTINATION. The parameter DESTINATION informs the SAP system that the called function module runs in a different system to the calling system. RFC communication with the remote system takes place as a part of the CALL FUNCTION command.
RFC function modules in an SAP system must be proper function modules and must be registered in the SAP system as remote.
If the calling program and the called program are both ABAP programs, the RFC interface provides both communication partners. The calling program can be any ABAP program, and the called program must be a function module that is registered as remote.
For more detailed information on calling function modules that are registered as remote, see Calling RFC Function Modules in ABAP.
For more information on writing function modules that you want to call remotely, see Writing RFC Function Modules in ABAP.
Interfaces for calling non-ABAP programs
If either the calling program or the called partner is not an SAP program, this program must be programmed in such a way that it can play the role of the other partner in RFC communication.
To support you when implementing RFC partner programs in non-SAP systems, read: Components of the SAP Communication Technology
RFC-supported and GUI-supported interfaces can be used by external programs to call function modules in SAP systems, and execute them in these systems. Likewise, ABAP programs can also use these interfaces to use functions supplied by external programs.
These are the types of RFC :
Asynchronous RFC (aRFC)
Synchronous RFC (sRFC)
Transactional RFC (tRFC)
Queued RFC (qRFC)
Parallel RFC (pRFC)
RFC:
Remote Function Call (RFC) is the standard SAP interface for communication between SAP systems. The RFC calls a function to be executed in a remote system.
Asynchronous RFC :
This is used when you need to increase the performance of ABAP program by having system call more than one function module in parallel than forcing the program to wait for results .
Synchronous RFC:
The first version of RFC is synchronous RFC (sRFC). This type of RFC executes the function call based on synchronous communication, which means that the systems involved must both be available at the time the call is made.
Transactional RFC:
If an error occurs during a synchronous remote function call, the system cannot tell at what point the error occurred (most crucially, whether the function module was actually processed in R/3 before the operation failed). Restarting a failed call is therefore a dangerous thing to do, since you risk duplicating a completed function call.
To alleviate this problem, you can use transactional RFC, which guarantees that each function call you issue will only be executed once, even if you submit it repeatedly to the R/3 System. The system implements this safeguard by assigning a unique transaction ID (TID) to each transaction that you submit. When you attempt to process the transaction, the system checks whether that TID has already been processed. If it has, the transaction is ignored.
Queued RFC:
When you use transactional RFC, you cannot guarantee the order in which the function calls will be processed in the system (it is quite possible that one call might overtake another). For cases where you need to specify a particular processing order, you can use queued RFC, which is an extension of transactional RFC. In qRFC, you place each function call in a logical queue. A function call cannot be executed until all of its predecessors in the queue have been processed. Queued RFC calls are processed asynchronously.
For More Info,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f078394a-4469-2910-c4bf-853c75674694 -
hi all
can anyone jst explain me for wht purpose the following function modules were used
SPI_AGENT_IDOC_CREATE
KD_GET_FILENAME_ON_F4
MASTER_IDOC_DISTRIBUTE
DB_GET_TABLE_FIELDS
NUMBER_GET_NEXT
EDI_DOCUMENT_OPEN_FOR_READ
EDI_DOCUMENT_READ_LAST_STATUS
CARD_CHARACTERISTIC_READ
CONVERSION_EXIT_ATINN_INPUTIt thinks it's easier to read the documentation....
<b>KD_GET_FILENAME_ON_F4</b> --> Get the source of a file in the presentation server.
<b>MASTER_IDOC_DISTRIBUTE</b> --> Create an IDOC by code.
<b>DB_GET_TABLE_FIELDS</b> --> Get the fields of a table.
<b>EDI_DOCUMENT_OPEN_FOR_READ</b> --> Opens an EDI (IDoc) document for reading....Just for reading.
<b>EDI_DOCUMENT_READ_LAST_STATUS</b> --> Reads the status of an EDI (IDoc) document.....21 for Ok, 30 for error....
<b>NUMBER_GET_NEXT</b> --> It think this is use by SNRO transacction....
Greetings,
Blag. -
Bapi/Function mod for copy
Hi Friends
We r implementing Workflow for cost cener and Profit center planning, as per our requirement we have to copy version (AP) to other version and this should be done in back ground,is there any BAPI or function module for this function.
Thanks & Regards
AKHello
Check these BAPI
BAPI_APPREQUEST_ADDVARIANT Add a Variant to an Appropriation Request
BAPI_APPREQUEST_CHANGE Change an Appropriation Request
BAPI_APPREQUEST_CHANGEVARIANT Change Appropriation Request Variant
BAPI_APPREQUEST_CREATE Create Appropriation Request
BAPI_APPREQUEST_DELETE Deletion of an Appropriation Request
BAPI_APPREQUEST_GETDETAIL Display of an Appropriation Request
BAPI_APPREQUEST_GETSTATUS Display Status of an Appropriation Request
BAPI_APPREQUEST_REMOVEVARIANT Delete an Appropriation Request Variant
BAPI_APPREQUEST_SETSTATUS Setting System and User Status of Appropriation Request
BAPI_APPREQUEST_SETSTATUSVARNT Setting of User and System Status on Variants -
Hi all,
I wanted to use smartform '/SMB40/MMPO_L ' for PO print out.
I configured the driver program '/SMB40/FM06P' and the smartform in the tcode NACE.
But when I hit the print preview button on ME23N. I am getting this error
Function module /SDF/AL_MAP_TRANSID_LOGH does not exist
What is this function module?
what might be the problem?
How can I solve this issue?
Thanks,
Goldie.Hello,
have u got the solution for this issue?
I am having similar pop up error msg but it is in BW system!
Any thoughts why the system is throwing this error msg?
Raj -
Timeout and respond function modes
I was just wondering if i add TIMEOUT feature in my custom workflow, then on TIMEOUT, will the code in (FUNCMODE = 'RESPOND') execute along with the code i write in (FUNCMODE = 'TIMEOUT') ?
This is really important for me before proceeding furthur. Any help is really appreciated.
Thanks!!!!
JimJim , just to confirm , only the code in (FUNCMODE = 'TIMEOUT') within the post notfication function will execute.
-
Hello Experts,
While using the Fm /SAPAPO/OM_ACT_GET_BY_RES
i am getting the error ' COM routine with own fault code finishes '
please explain me about this.
Thanx in Advance.hi John,
Check out this thread ../
http://www.sapdevelopment.co.uk/reporting/alv/alv_variousfcat.htm
*For object ALV (Screen)
DATA: gd_fieldcat2 type LVC_T_FCAT.
CALL FUNCTION '<b>LVC_FIELDCATALOG_MERGE</b>'
EXPORTING
* I_BUFFER_ACTIVE =
I_STRUCTURE_NAME = 'EKKO'
* I_CLIENT_NEVER_DISPLAY = 'X'
* I_BYPASSING_BUFFER =
CHANGING
ct_fieldcat = gd_fieldcat2
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3.
when do we use???..
http://help.sap.com/saphelp_erp2005vp/helpdata/en/22/a3f5fed2fe11d2b467006094192fe3/frameset.htm
Regards,
santosh
Message was edited by: Santosh Kumar P -
hi all,
For the function modules : me_read_po_for_printing and me_print_po, can you read the documentation for these in your system ? My buttons are grey out for FM Documentation. Do you have it differently ?
I am trying to see if there any documentation available for these.
thanks
JoyceHi,
Try this: http://www.sapwiki.cl/wiki/index.php?title=SAP_MM_COMPRAS_FORMULARIOS_PDF
or:
FORM entry_lpma USING ent_retco ent_screen.
DATA: l_druvo LIKE t166k-druvo,
l_nast LIKE nast,
l_from_memory,
l_doc TYPE meein_purchase_doc_print.
CLEAR ent_retco.
l_druvo = '6'.
CALL FUNCTION 'ME_READ_PO_FOR_PRINTING'
EXPORTING
ix_nast = nast
ix_screen = ent_screen
IMPORTING
ex_retco = ent_retco
ex_nast = l_nast
doc = l_doc
CHANGING
cx_druvo = l_druvo
cx_from_memory = l_from_memory.
CHECK ent_retco EQ 0.
Best regards,
Leandro Mengue
Maybe you are looking for
-
Is there a way or a plugin to add "capture time" as file name
I just photographed a surf contest out in California - I would like to add the capture time as the file name to make it easier to identify the surfers. Any easy ways to do this for 600 images?
-
Safari does not recognize flash plug-in and will not play flash video
I use Safari as my go-to browser for web sites that would otherwise require me to turn off my several ad-block/flash-block plugIns for Firefox. I do have it set to ask for permission ('Trust this site?') for every time I use flash on a new site (sin
-
Does VGA Transfer Sound as well?
I have a white macbook and purchased a mini dvi to vga connection so i can connect it to my college class projector. anyways, obviously the images will transfer to the screen but will sound go to the speakers as well?
-
Is there a way to know resource usage by individual add-ons and plug-ins?
I tried about:memory but it didn't seem to provide a break-up.
-
Verizon Wifi now works on Mac?
Read this blog and would love to know if any qualifed Verizon customers can verify if this change actually works. http://wyang0.blogspot.com/2012/01/verizon-wi-fi-for-all-devices-mac-linux.html