Function module does not exixt for TRFC struk

hello All,
A master load daily happens. But for today it is showing short dump error in satus and no errro messag ine detail tab .It is showing ABAP run tim error in status and also showing TRFC stuck in Source system. When i am trying to execute LUW it is shwoinf message Function module doesnot exixt or Exception raised..
Thanks

Hi,
Delete if any incorrect load.
Restart the load.. just keep checking the LUW ( If its taking for long time to load) .. and there is any trfc struck than run LUW one by one till all queue is completed.
Regards,
SKDDON

Similar Messages

Function module does not exist in ECC 6.0

Hi All,
These two below function module does not exist in ECC 6.0 but exist in 4.6.Could you please let me know replacement of these two's.
FI_DOCUMENT_ARCH_READ_SINGLE
CHECK_IBAN_ACTIVE
Thanks
Mohit

Hi,
Thanks for your reply.Could you please give me example that how to use it.
Thanks
Mohit

Error in ERM: Function module does not exist

Hi all,
Lately, we are experiencing a frequent error in ERM (5.3 SP 15.0) that we had not had before. We are unsure what caused the error. The message displayed to the user is "Unhandled error". The log error message is "Message Code is 651 Messsage Details Function module does not exist Message Type is E" (see full logs below).
The error occurs for example, when users are trying to generate derived roles after saving the org values for the derived role during the methodology process, or when administrators are trying to update the impacted derived roles after for org value mappings.
Has anyone experienced this or someting similar before? Any ideas what could be the reason here?
Thanks!
Patrick
Edited by: Patrick Weyers on Sep 15, 2011 9:36 AM

Log extract:
2011-09-15 09:05:15,103 [SAPEngine_Application_Thread[impl:3]_18] ERROR Message Code is 651 Messsage Details Function module does not exist Message Type is E
java.lang.Throwable: Message Code is 651 Messsage Details Function module does not exist Message Type is E
     at com.virsa.re.service.sap.dao.ManageAuthDataDAO.getAuthorizationData(ManageAuthDataDAO.java:1064)
     at com.virsa.re.bo.impl.AuthorizationDataBO.getNewTransactionObjects(AuthorizationDataBO.java:821)
     at com.virsa.re.role.actions.AuthAuthorizationDataAction.addObjsForNewTxns(AuthAuthorizationDataAction.java:3527)
     at com.virsa.re.role.actions.AuthAuthorizationDataAction.reloadTransactions(AuthAuthorizationDataAction.java:4128)
     at com.virsa.re.role.actions.AuthAuthorizationDataAction.execute(AuthAuthorizationDataAction.java:157)
     at com.virsa.framework.NavigationEngine.execute(NavigationEngine.java:273)
     at com.virsa.framework.servlet.VFrameworkServlet.service(VFrameworkServlet.java:230)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at com.virsa.framework.servlet.VFrameworkServlet.service(VFrameworkServlet.java:286)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
     at com.virsa.comp.history.filter.HistoryFilter.doFilter(HistoryFilter.java:43)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:384)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:219)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
2011-09-15 09:05:15,105 [SAPEngine_Application_Thread[impl:3]_18] ERROR com.virsa.re.role.actions.AuthAuthorizationDataAction
java.lang.Throwable: java.lang.NullPointerException
     at com.virsa.re.service.sap.dao.ManageAuthDataDAO.getAuthorizationData(ManageAuthDataDAO.java:1084)
     at com.virsa.re.bo.impl.AuthorizationDataBO.getNewTransactionObjects(AuthorizationDataBO.java:821)
     at com.virsa.re.role.actions.AuthAuthorizationDataAction.addObjsForNewTxns(AuthAuthorizationDataAction.java:3527)
     at com.virsa.re.role.actions.AuthAuthorizationDataAction.reloadTransactions(AuthAuthorizationDataAction.java:4128)
     at com.virsa.re.role.actions.AuthAuthorizationDataAction.execute(AuthAuthorizationDataAction.java:157)
     at com.virsa.framework.NavigationEngine.execute(NavigationEngine.java:273)
     at com.virsa.framework.servlet.VFrameworkServlet.service(VFrameworkServlet.java:230)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at com.virsa.framework.servlet.VFrameworkServlet.service(VFrameworkServlet.java:286)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
     at com.virsa.comp.history.filter.HistoryFilter.doFilter(HistoryFilter.java:43)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:384)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:219)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

XI datasources function modules does not exist after BW upgrade to 7.3

We have recently upgraded our dev BI system to 7.3
During our testing phase we found that we are unable to load data coming from XI system.
When we checked the functional modules of the XI(web services)
datasources we found that the function modules does not exist in the system.
Eg : For our GECARS datasource we have 2 funcitonal modules
1. /BIO/QI6AZXH_ZIFIGECARS
2. /BIO/QI6AZXH_ZIFIGECARS_RFC (delta function module)
we have activated resp datasource and found that code for
/BIO/QI6AZXH_ZIFIGECARS exist now but we are facing issues with RFC
funciton modules (/BIO/QI6AZXH_ZIFIGECARS_RFC )
To put it in simple terms we are facing issues with Dev BI since upgradeto 7.3 with respect to RFC and non-availability of function modules.
Kindly help us in resolving this.
Thanks,
Kiran

Hello Kiran,
Have you found the reason for the non existence of the FM in the system after the upgrade?
Have you found any alternative? I hope you would have created an OSS message, if so whats the response have you got?
Kindly let me know as I am experiencing similar issue where one of the FM (RSDRC_MULTIPROV_GET_MAPPING) does not exist in BI system after the upgrade.
Regards,
Vinoth V

Unable to create rule Error:Function Module does not meet the workflow conv

Hi Workflow experts,
Could any one help me with rule creation. Below is my Function Module Interface.
""Local Interface:
*" TABLES
*" AC_CONTAINER STRUCTURE SWCONT OPTIONAL
*" ACTOR_TAB STRUCTURE SWHACTOR OPTIONAL
*" EXCEPTIONS
*" NOBODY_FOUND
The function module test is successful with all required conventions for workflow but while i try to create a rule with the funtion module i get the error "Function Module does not meet the workflow conventions"
I Also have included the following in FM
INCLUDE <cntn01>.
Any suggestions would be helpful. Thanks in Advance,
Imran

Hi,
I am not sure whether the rule accepts the optional flag. Remove the optional flag for the tables parameters and try again. According to the documentation you have implemented the right interface. It might be the issue with the tables parameter being optional.
Hope this helps,
Sudhi

RSAR_TRFC_DATA_RECEIVED Function module does not exist or EXCEPTION raised

Dear All,
We have 2 production systems one is a APO server & the other being BW server.
While checking in SM58 of our APO production server we found that so many entries were in error saying "ERROR REQU_<number> PG# 12 In BW" with target system as BWCLNT<CLIENT NO>.
We checked in both the production systems for any job failure w.r.t same time span but could find nothing.
When we tried to solve this by using F6 option to re-execute the LUW it says "Functional Module doesnot exists or Exception Raised". After doing checks it was found out that the Functional Module (RSAR_TRFC_DATA_RECEIVED) was existing . So we need to know about how we can solve this EXCEPTION RAISED issue.
Thanks & Regards,
SAPAPO
Edited by: SAP-APO on Dec 30, 2009 8:38 AM

Hi,
This migth be problem with not catching exact exception in the code.There might be data you are passing which not getting caught by the exception.
If you are using any code add this FM in the code or else try to debug where exactly u r facing this problem.
Regards,
Shiva Kumar G.C

Function Module Does not exist

Hello Experts,
I am trying to run the initialization for the Billing conditions 2lis_13_vdkon datasource.
Job is getting cancelled and the following error messages are coming when i check the job log in source system
Job started
Step 001 started (program SBIE0001, variant &0000000006238, user ID BASIS
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = 2LIS_13_VDKON
RLOGSYS    = BWDCLNT900
REQUNR     = REQU_DHKONXGA1B82HZ49O94KQ03C4
UPDMODE    = C
LANGUAGES = *
*          Current Values for Selected Profile Parameters               *
* abap/heap_area_nondia......... 2000683008
* abap/heap_area_total.......... 2000683008
* abap/heaplimit................ 40894464
* zcsa/installed_languages...... ED
* zcsa/system_language.......... E
* ztta/max_memreq_MB............ 2047
* ztta/roll_area................ 3000320
* ztta/roll_extension........... 2000683008
Function module /BI0/QI2LIS_13_VDKON does not exist
You can only use LIKE and TYPE to specify types in RFC
Internal session terminated with a runtime error (see ST22)
Job cancelled
even when i check in ST22
Category
ABAP Programming Error
Runtime Errors
IMPORT_ALIGNMENT_MISMATCH
Except.
CX_SY_IMPORT_MISMATCH_ERROR
ABAP Program
SAPLMCEX
Application Component LO-LIS
Date and Time
06.05.2014 12:30:28
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
not caught in
procedure "MCEX_BW_LO_API" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When importing object "MC13VD0KON_TAB", the structure did not match the
structure of the target object. The error occurred in component
no. 21.
This may be due to one of the following reasons:
- the structure is actually different (the next field has, for
example, a different data type) or
- the same sequence of components were exported and imported,
but the fields were from other include units.
How to correct the error
There is a probably a new version of the program active that does
not match the dataset. The data may not have been converted.
It is also possible that the field type of the imported field
has been changed in the Data Dictionary.
Try to eliminate the error by regenerating the program "SAPLMCEX". To
do this, proceed as follows:
Call Transaction SE38 in the R/3 System, enter the program
name "SAPLMCEX" and then choose "Generate".
If the error occurred in your own ABAP program or in an SAP
program you modified, try to remove the error.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"IMPORT_ALIGNMENT_MISMATCH" "CX_SY_IMPORT_MISMATCH_ERROR"
"SAPLMCEX" or "LMCEXU06"
"MCEX_BW_LO_API"
If you cannot solve the problem yourself and want to send an error
please help me in this regards
Quick response will be appreciated.
Thanks in advance

Hi Ram,
no upgrades recently
they have taken backup from production server.
now i am facing this prob in development server.
when i am trying to check in RSA3 it is throwing same short dump
as u said i did all the re activations still i am facing the same issue.
please give me some other sol...
thanks,
srikanth Putta'

Error EU 802: Function Module does not exist

Hello everyone!
While running a DTP, I'm getting the following error:
EU 802: Function Module RSD_YPERSON_TXT_GET does not exist
Anyone has any idea what this is about?
Thanks in advance for your responses!
Best Regards,
Luís.

Hi,
I have resolved this issue. Turns out that I was mapping a source field INPER (In-Period) directly to 0CALMONTH. The problem is that this source field can have more than 12 periods per year.
The error message was totally misleading... there's SAP for you
Points assigned for the effort.
Best regards,
Luís.

Function Module does not exist error during query run time.

Hi,
During the execution of one of our queries we get the error "Function module RSD_(InfoObject Tech Name)_TXT_GET does not exist.
Now, this InfoObject is used in the query as a filter to restrict on certain values.
I searched in SE37 and no such function exists.
Let me know if you have any suggestions/resolutions to this issue.
Thanks,
AR.

even if the question is quite old already, maybe some other people need the answer to this, too:
In our case this error which Sudhir Anandarao describes meant, that there was no data found for given input. This is quite strange, but definitly was the source as I dont get the error if something is found by the query. The Query, InfoObject were correct, just the data asked for was wrong (like get me all ID's greater than 5, if there are only ID's smaller or equal 5 it would state "Function module RSD_(InfoObject Tech Name)_TXT_GET does not exist.")

Upgrade: Function Module does not exist

Hi Experts,
transaction FOIM is giving DUMP in ECC.
It shows a message
Function module "/CUKREQ/RECN_EVENT_FMOD2" not found.
This function module exist in 4.6c.
Will anyone suggest what to do?
Regards:
Vipin

Check for a SAP note in service.sap.com

Function Module does not fetch value

Hi All,
I am using the fm RV_PRICE_PRINT_HEAD to fetch condition records. When I run this fm in SE37 for a particular document(vbeln) number, the values are fetched correctly into the internal tables TKOMV and TKOMVD.
The same fm does not fetch values when I run for second time for the same document(vbeln). This means :
1) I will go to SE37, type RV_PRICE_PRINT_HEAD, supply the export parameters in COMM_HEAD_I, execute it and obtain the condition records (Till this time absolutely fine)
2) Now, press Back (F3), Let the export parameters in "COMM_HEAD_I" will remain same. Just press Execute (F8). Then condition values are not fetched.
Could any body help in this regard...
Thanks
Thimmappa Hegde

Hi
 I have given you the other alternative bcoz there is a limitation while calling this FM: RV_PRICE_PRINT_HEAD.
If you see the comments and code of Include: LV61AA11, you can understand the problem.
* mechanism to controll which conditions are already part of table TKOMV
Every time a pricing result is read from database the key is put into
TABGL. Also TABGL is updated if we've lines in TKOMV assigned to a
special key but entry in TABGL (case 2).
Originally TABGL was established to handle following pathological
case: condition successfully read from DB -> entry in TABGL. Then all
read conditions where deleted during processing (e.g. manually
deletion etc.). If we run into this routine again no records should
be redetermined from DB...
read table tabgl with table key knumv = komk-knumv
 transporting no fields.
Case 1:
conditions have been already read because there is a fitting entry in
TABGL. Exit immediately if caller doesn't want to force DB access.
if sy-subrc eq 0. ---> First time SY-SUBRC NE 0 so no problem
 if generell_lesen ne 'X'. --> Later runs SY-SUBRC eq 0 and generell_lesen value is SPACE.
 exit.
 endif.
else.
Hope this clarifies your doubt now.
Kind Regards
Eswar

Install Enterprise WSD Multi-Function Printer does not work for Win10

Hallo, I installed Win10 three days ago and I am repeatedly getting the same error message. Can you help? Hewlett-Packard - Enterprise WSD Multi-Function Printer, Multi-Function Printer, Other hardware - Null Print - HP ENVY 7640 series thanks!

PAHU wrote:
There is the pxlmono package, which has a pxlcolor driver that will allow printing in colour, and possibly two sided printing and stapling. But I doubt that you will have hole punch with this driver. Also, the Linux Foundation that provides this driver set was recently hacked and the web site is not back online yet.
I would echo PAHUs conclusion about the driver you need. I would also add that the pxlmono/pxlcolor drivers for all Ricoh family of printers (Lanier is a member of the Ricoh family of printers) are actually provided by Ricoh. They would have all the functionality that your printer supports. It therefore would support two sided printing if you have a duplexer on the printer. The driver would also support any hole punching or stapling if your printer is so equipped.
Also, as PAHU mentions, the OpenPrinting.org site is down right now. I have all the packages you would need. The big problem is that the Ghostscript package is about 35 MB in size. I don't have enough server space to host it. If you must get the printer working right now, please e-mail me at walterwego at macosx dot com. I could try to send you the file using an outside file transfer site.
EDIT: I just checked the PPDs included in the latest pxlmono package. The Lanier LD655C is not included in the package. I don't know which, if any, of the included drivers you could substitute. It looks like you will have to use the B&W Generic PCL driver until the OpenPrinting site is back up and a Ricoh tech is available to help with suitable model substitution.
Message was edited by: Matt Broughton

Function module does not update the storage location in delivery

Hello,
I've been trying to use SD_DELIVERY_UPDATE_PICKING to update the storage location in SD return deliveries, without any success. Any clues? The FM works fine when it comes to updating the picking quantity, but the storage location issue still persists.
Thanks in advance,
Joao

Hi Joao,
I have the same problem. I tried to find the FM SD_OUTB_DELIVERY_CHANGE but couldn't find it. Have you by any change specified the incorrect FM name here? If yes, can you please communicate the correct FM name?
Regards,
Divyaman

Function module "GM_DOCUMENT_REVERSE" not found. after Patch Update

Hi Abapers/Basis
After patch update i am not able to do FBCJ reversal entry getting below error message.
Runtime Errors         CALL_FUNCTION_NOT_FOUND
Exception              CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time          25.05.2011 14:43:26
Short text
     Function module "GM_DOCUMENT_REVERSE" not found.
What happened?
     The function module "GM_DOCUMENT_REVERSE" is called,
     but cannot be found in the library.
     Error in the ABAP Application Program
     The current ABAP program "SAPLRWCL" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FUNC', was
     not caught in
    procedure "CALL_DISPATCHER_STORNO_R" "(FORM)", nor was it propagated by a
     RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    The program "SAPLRWCL" contains the CALL FUNCTION statement.
    The name of the function module to be called is "GM_DOCUMENT_REVERSE".
    No function module exists with the name "GM_DOCUMENT_REVERSE".
    All function modules are listed in the Function Library (SE37).
    Possible reasons:
    a) Wrong name specified. Pay particular attention to
       upper/lower case and underscores ("_").
       or
    b) Transport error
    c) In the case of an enqueue/dequeue module,
       the lock object may not have been activated
       (ABAP/4 Dictionary).
How to correct the error
    Check the last transports to the SAP System.
    Is the program "SAPLRWCL" currently being changed?
    If an enqueue/dequeue module is involved, is the activation
    of the lock object missing in the ABAP/4 Dictionary?
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "CALL_FUNCTION_NOT_FOUND" "CX_SY_DYN_CALL_ILLEGAL_FUNC"
    "SAPLRWCL" or "LRWCLF10"
    "CALL_DISPATCHER_STORNO_R"
    Function modules with names similar to "GM_DOCUMENT_REVERSE":
    GM_DOCUMENT_CLOSE
    GM_DOCUMENT_RECORD
    GM_DOCUMENT_DELETE
    GM_DOCUMENT_POST
    GM_DOCUMENT_CHECK
    G_DOCUMENT_RECORD
    GJ_DOCUMENT_RECORD
    GM_DOCUMENT_PROJECT
    GET_DOCUMENTS
    GM_DOCUMENT_DISPLAY
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
   To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
   Display the system log by calling transaction SM21.
   Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
   In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
Moderator message: please don't just dump your dumps, search for SAP notes or open a call with SAP instead.
Edited by: Thomas Zloch on May 25, 2011 2:16 PM

Hi Karthik,
Thank you for ur reply.
I did not implement any user exit/ badi. Dump is saying that my smarform function module does not exist in the se37 library.
I have excuted my form through se38, that time is working fine. When i tried through output type it is going to dump.
Regards,
Kusuma.

Function Module (ENQUEUE_ES_PROG) not working in Background

I scheduled a job which runs every 15 mins in the the background to fetch data from an external system,depending on the data volume ,the program can sometimes run for over 15 minutes.To avoid data conflict I used a function module ENQUEUE_ES_PROG on the program to first check if the job started is still running before another job gets kicked.The problem I have is the fact that this function module does not seem to work in the background but in the looks perfect in foreground. Does anyone have a clue on how to use this FM for background job?

Hello Mochabo,
Consider the following scenario:
Your job is running for more than 15 minutes. Since it is running in the background, it will be executed by a work-process of type BACKGROUND. If there's only one BACKGROUND work process configured for your application server, then the second job will have to be waiting till the first one finishes and releases the background work process.
But when you are executing this in the foreground, the DIALOG work-process does the processing. So you are not finding any problem.
So, to my knowledge, there will be a problem when there's only one BACKGROUND work process. Please go to transaction SM50 and see how many of them are configured for the current application server.
Also, in case there's only one BACKGROUND work-process, you will not have toworry that the second job will start before the first has finished. It simply can't. It has got to wait.
Hope this explanation helps.
Regards,
Anand Mandalika.

Function module does not exixt for TRFC struk

Similar Messages

Maybe you are looking for