Function Module for calculating hours between dates and their times.

Hi all,
Is there any standard function module for calculating the time difference in hours between two dates with start and end times.
Regards,
Sudipto.

Sudipto,
How're you ????????????????????
Check out the following Function Module:
SD_DATETIME_DIFFERENCE (Give the difference in Days and Time for 2 dates)
Regards,
Abir
Don't forget to award Points *

Similar Messages

Function Module for getting Payroll start date and end date

Hi Gurus,
If I give one date then is there any function module to find the payroll period start date and enddate for that given date?
Points will be awarded
Thanks
Ravi

Hi,
Try these FMs
HR_PAYROLL_PERIODS_GET
HR_BEN_PAY_GET_PAYROLL_PERIODS
HR_PAYROLL_PERIOD_GET
HR_P06I_GET_PAYROLL_PERIOD
Regards,
PRashant

Function module for calculating planned and actual cost of production order

Hi ,
Do we have any standard function module for calculating planned and actual cost for production order?
i need to implement this in a Z-report.
Thanks
Srini

Hi,
try below function module
CRMCO_GET_PLAN_ACTUAL_COSTS
CO_IH_GET_PLANNED_COSTS_TOTAL
Regards,
Sankaran

Functional module for Getting Material classification data.

Please tell me Functional module for Getting Material classification data like class type , class, characteristics and characteristics values for material.

Dear,
FM:
CLAF_CLASSIFICATION_OF_OBJECTS
Table KLAH Class Header Data
- KSML Characteristics of a Class
Regards,
R.Brahmankar

Regarding function module to convert hours to minutes and seconds to minute

hi all,
is there any function module to convert hours to minutes and seconds to minutes....if so please guided me....i hav req like this...want to convert all those to minutes[seconds and hours]....

Hi,
Use FM
SD_CALC_DURATION_FROM_DATETIME
Pass paramters like
I_DATE1 16.09.2008
I_TIME1 10:33:00
I_DATE2 16.09.2008
I_TIME2 19:00:00
and you will get the result as below..
E_TDIFF 8:27
8 hours and 27 minutes...
Now u can use this values of hours and minutes to get the exact wage type values... get the details from HR module and multiply it with the hours and minute and calculate it...
Use Offsets and get the hour and minute value from E_TDIFF
Hope it will solve your problem..
Thanks & Regards,
Naresh

Function module for detailes description of Order and long text in task

Hello gurus,
please help me with Function module for detaile description of Order and long text in task list(operation Tab)?
regards,
YK

Hi,
You should be able to read the Order short text directly from table AUFK. The Order long text or task list long text can be read by using FM "Read_text". Use Goto> Header on every long text screen to identify the parameters that need to be passed hen using this FM.
Regards
Narasimhan

Function module for calculating sigma balance

Is there any function module available in SAP for calculating sigma balance.
Thanks
Gaurav

hi
ABAP_DOCU_DOWNLOAD     Download ABAP documentation in HTML format.
APPL_LOG_DELETE     With this function module you delete logs in the database according to specified selection conditions
APPL_LOG_DISPLAY     With this function module you can analyze logs in the database.
APPL_LOG_DISPLAY_INTERN     With this function module you can analyze logs in local memory, e.g. when you have only collected log records at runtime and do not want to write to the database.
APPL_LOG_INIT     This function module checks whether the specified object or sub-object exists and deletes all existing associated data in local memory.
APPL_LOG_READ_DB     With this function module you read the log data in the database for an object or sub-object according to specified selection conditions.
APPL_LOG_READ_INTERN     With this function module you read all log data whose log class has at least the specified value, from local memory, for the specified object or sub-object.
APPL_LOG_SET_OBJECT     With this function module, you create a new object or sub-object for writing in local memory. With a flag you can control whether the APPL_LOG_WRITE_... messages are written in local memory or are output on the screen.
APPL_LOG_WRITE_DB     With this function module you write all data for the specified object or sub-object in local memory to the database. If the log for the object or sub-object in question is new, the log number is returned to the calling program.
APPL_LOG_WRITE_HEADER     With this function module, you write the log header data in local memory.
APPL_LOG_WRITE_LOG_PARAMETERS     With this function module, you write the name of the log parameters and the associated values for the specified object or sub-object in local memory. If this function module is called repeatedly for the same object or sub-object, the existing parameters are updated accordingly. If you do not specify an object or sub-object with the call, the most recently used is assumed.
APPL_LOG_WRITE_MESSAGE_PARAMS     With this function module you write a single message, with parameters, in local memory. Otherwise the function module works like APPL_LOG_WRITE_SINGLE_MESSAGE.
APPL_LOG_WRITE_MESSAGES     With this function module you write one or more messages, without parameters, in local memory.
APPL_LOG_WRITE_SINGLE_MESSAGE     With this function module you write a single message, without parameters, in local memory. If no header entry has yet been written for the object or sub-object, it is created. If you do not specify an object or sub-object with the call, the most recently used is assumed.
ARFC_GET_TID     will return the IP address of the terminal in hex.
BAL_CNTL_CREATE     Create Control for log display
BAL_CNTL_FREE     Release Control
BAL_CNTL_REFRESH     Put new data in log display
BAL_DB_DELETE     Delete logs from the database
BAL_DB_DEQUEUE     Unlock log
BAL_DB_ENQUEUE     Lock log
BAL_DB_LOAD     Load logs from the database
BAL_DB_LOAD     Load log(s)
BAL_DB_SAVE     Save logs in the database
BAL_DB_SAVE     Save log(s)
BAL_DB_SAVE_PREPARE     Prepare save
BAL_DB_SEARCH     Find logs in the database
BAL_DSP_LOG_DISPLAY     Display messages in memory
BAL_DSP_LOG_DISPLAY     Display Log
BAL_DSP_LOG_PARAMETERS     Either output extended long text or call a callback routine (based on the data in BAL_S_LOG-PARAMS)
BAL_DSP_LOG_TECHNICAL_DATA     Output all log header data
BAL_DSP_MSG_LONGTEXT     Display message long text
BAL_DSP_MSG_PARAMETERS     Either output extended long text or call a callback routine (based on the data in BAL_S_MSG-PARAMS)
BAL_DSP_MSG_TECHNICAL_DATA     Output technical data of a message such as work area, error number, etc.
BAL_DSP_OUTPUT_FREE     End output
BAL_DSP_OUTPUT_INIT     Initialize output
BAL_DSP_OUTPUT_SET_DATA     Set dataset to be displayed
BAL_DSP_PROFILE_DETLEVEL_GET     Message hierarchy in DETLEVEL
BAL_DSP_PROFILE_NO_TREE_GET     Display without tree (fullscreen)
BAL_DSP_PROFILE_POPUP_GET     Display without tree (popup)
BAL_DSP_PROFILE_SINGLE_LOG_GET     Standard profile (SLG1) for one log
BAL_DSP_PROFILE_STANDARD_GET     Standard profile (SLG1) for a lot of logs
BAL_GLB_AUTHORIZATION_GET     Assign authorization
BAL_GLB_AUTHORIZATION_RESET     Reset authorization
BAL_GLB_CONFIG_GET     Read configuration
BAL_GLB_CONFIG_SET     Set configuration
BAL_GLB_MEMORY_EXPORT     Put function group memory in ABAP-MEMORY
BAL_GLB_MEMORY_IMPORT     Get function group memory from ABAP-MEMORY
BAL_GLB_MEMORY_REFRESH     (Partially) reset global memory
BAL_GLB_MEMORY_REFRESH     (Partially) initialize memory
BAL_GLB_MSG_CURRENT_HANDLE_GET     Get current message handle
BAL_GLB_MSG_DEFAULTS_GET     Get message defaults
BAL_GLB_SEARCH_LOG     Find logs in memory
BAL_GLB_SEARCH_MSG     Find messages in memory
BAL_LOG_CREATE     Create log with header data
BAL_LOG_CREATE     Create log with header data
BAL_LOG_DELETE     Delete log (from database also at Save)
BAL_LOG_EXIST     Check existence of a log in memory
BAL_LOG_HDR_CHANGE     Change log header
BAL_LOG_HDR_CHECK     Check log header data for consistency
BAL_LOG_HDR_READ     Read log header and other data
BAL_LOG_MSG_ADD     Put message in log
BAL_LOG_MSG_ADD     Put message in log
BAL_LOG_MSG_CHANGE     Change message
BAL_LOG_MSG_CHANGE     Change message
BAL_LOG_MSG_CHECK     Check message data for consistency
BAL_LOG_MSG_CUMULATE     Add message cumulated
BAL_LOG_MSG_DELETE     Delete message
BAL_LOG_MSG_DELETE     Delete message
BAL_LOG_MSG_EXIST     Check existence of a message in memory
BAL_LOG_MSG_READ     Read message and other data
BAL_LOG_MSG_REPLACE     Replace last message
BAL_LOG_REFRESH     Delete log from memory
BAL_LOG_REFRESH     Delete log from memory
BAL_MSG_DISPLAY_ABAP     Output message as ABAP-MESSAGE
BAL_OBJECT_SELECT     Read Application Log objects table record
BAL_OBJECT_SUBOBJECT     Check whether object and subobject exist and the combination is allowed
BAL_SUBOBJECT_SELECT     Read subobject table record
BP_EVENT_RAISE     Trigger an event from ABAP/4 program
BP_JOBLOG_READ     Fetch job log executions
CHANGEDOCUMENT_READ_HEADERS     Get the change document header for a sales document, and put the results in an internal table.
Example:
      CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
           EXPORTING
                objectclass = 'EINKBELEG'
                objectid    = l_objectid
                username    = space
           TABLES
                i_cdhdr     = lt_cdhdr.
      LOOP AT lt_cdhdr WHERE udate IN s_aedat.
        CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
             EXPORTING
                  changenumber = lt_cdhdr-changenr
             TABLES
                  editpos      = lt_editpos.
        LOOP AT lt_editpos WHERE fname = 'LOEKZ'
                           AND   f_new = 'L'.
          p_desc = text-r01. " Cancel Contract
        ENDLOOP.
      ENDLOOP.
CHANGEDOCUMENT_READ_POSITIONS     Get the details of a change document, and store them in an internal table. This will tell you whether a field was changed, deleted, or updated.
Example:
      CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
           EXPORTING
                objectclass = 'EINKBELEG'
                objectid    = l_objectid
                username    = space
           TABLES
                i_cdhdr     = lt_cdhdr.
      LOOP AT lt_cdhdr WHERE udate IN s_aedat.
        CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
             EXPORTING
                  changenumber = lt_cdhdr-changenr
             TABLES
                  editpos      = lt_editpos.
        LOOP AT lt_editpos WHERE fname = 'LOEKZ'
                           AND   f_new = 'L'.
          p_desc = text-r01. " Cancel Contract
        ENDLOOP.
      ENDLOOP.
CLAF_CLASSIFICATION_OF_OBJECTS     Return all of the characteristics for a material
CLOI_PUT_SIGN_IN_FRONT     Move the negative sign from the left hand side of a number, to the right hand side of the number. Note that The result will be left justified (like all character fields), not right justifed as numbers normally are.
CLPB_EXPORT     Export a text table to the clipboard (on presentation server)
CLPB_IMPORT     Import a Text Table from the Clipboard (on presentation server)
COMMIT_TEXT     To load long text into SAP
CONVERSION_EXIT_ALPHA_INPUT     converts any number into a string fill with zeroes, with the number at the extreme right
Example:
input = 123
output = 0000000000000...000000000000123
CONVERSION_EXIT_ALPHA_OUTPUT     converts any number with zeroes right into a simple integer
Example:
input   = 00000000000123
output = 123
CONVERT_ABAPSPOOLJOB_2_PDF     convert abap spool output to PDF
CONVERT_OTF     Convert SAP documents (SAPScript) to other types.
Example:
CALL FUNCTION "CONVERT_OTF"
       EXPORTING    FORMAT                = "PDF"
       IMPORTING    BIN_FILESIZE          = FILE_LEN
       TABLES       OTF                   = OTFDATA
                    LINES                 = PDFDATA
       EXCEPTIONS   ERR_MAX_LINEWIDTH     = 1
                    ERR_FORMAT            = 2
                    ERR_CONV_NOT_POSSIBLE = 3
                    OTHERS                = 4.
CONVERT_OTFSPOOLJOB_2_PDF     converts a OTF spool to PDF (i.e. Sapscript document)
CONVERT_TO_FOREIGN_CURRENCY     Convert local currency to foreign currency.
CONVERT_TO_LOCAL_CURRENCY     Convert from foreign currency to local currency
DATE_CHECK_PLAUSIBILITY     Check to see if a date is in a valid format for SAP. Works well when validating dates being passed in from other systems.
DATE_COMPUTE_DAY     Returns a number indicating what day of the week the date falls on. Monday is returned as a 1, Tuesday as 2, etc.
DATE_GET_WEEK     will return the week that a date is in.
DATE_IN_FUTURE     Calculate a date N days in the future.
DAY_ATTRIBUTES_GET
Return useful information about a day. Will tell you the day of the week as a word (Tuesday), the day of the week (2 would be Tuedsay), whether the day is a holiday, and more.(provided by Francois Henrotte)
DOWNLOAD     download a file to the presentation server (PC)
DYNP_VALUES_READ     Read the values from a dynpro. This function can be used to read the values from a report's selection screen too (Another example).
DYNP_VALUES_UPDATE     Similar to DYNP_VALUES_READ, this function will allow the updating of fields on a dynpro. Very useful when you want to change a field based on the value entered for another field.
ENQUE_SLEEP     Wait a specified period of time before continuing processing.
ENQUEUE_ESFUNCTION     Lock an abap program so that it cannot be executed.
Example:
Set the parameters as follows:
RELID = 'ZZ'
SRTF2 = 0
SRTF = (your report name)
Please note that you should not use SY-REPID to pass your report name to the function. The value of SY-REPID will change as it is being passed to the function module, and will no longer hold the value of the calling report.
EPS_GET_DIRECTORY_LISTING     return a list of filenames from a local or network drive
EPS_GET_FILE_ATTRIBUTES     Pass in a filename and a path, and will return attributes for the file
F4_DATE     displays a calendar in a popup window and allows user to choose a date, or it can be displayed read only.
F4_IF_FIELD_VALUE_REQUEST     Use values from a DDIC table to provide a list of possible values. TABNAME and FIELDNAME are required fields, and when MULTIPLE_CHOICE is selected, more than one value can be returned.
F4IF_INT_TABLE_VALUE_REQUEST     F4 help that returns the values selected in an internal table. Very handy when programming your very own F4 help for a field.
Example:
data:
    begin of t_values occurs 2,
      value like kna1-begru,
    end of t_values,
    t_return like ddshretval occurs 0 with header line.
t_values = 'PAR*'.
append t_values.
t_values = 'UGG'.
append t_values.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
       exporting
            retfield        = 'BEGRU'
            value_org       = 'S'
       tables
            value_tab       = t_values
            return_tab      = t_return
       exceptions
            parameter_error = 1
            no_values_found = 2
            others          = 3.
if sy-subrc = 0.
    read table t_return index 1.
    o_begru-low = t_return-fieldval.
    if o_begru-low = 'PAR*'.
      o_begru-option = 'CP'.
    else.
      o_begru-option = 'EQ'.
    endif.
    o_begru-sign = 'I'.
    append o_begru to s_begru.
else.
    o_begru = i_begru.
endif.
F4IF_SHLP_EXIT_EXAMPLE     documents the different reasons to use a search help exit, and shows how it is done.
F4IP_INT_TABLE_VALUE_REQUEST     This function does not exist in 4.6 and above. Use F4IF_INT_TABLE_VALUE_REQUEST instead.
FILENAME_GET     popup to get a filename from a user, returns blank filename if user selects cancel
FORMAT_MESSAGE     Takes a message id and number, and puts it into a variable. Works better than WRITE_MESSAGE, since some messages use $ as a place holder, and WRITE_MESSAGE does not accommadate that, it only replaces the ampersands (&) in the message.
FTP_COMMAND     Execute a command on the FTP server
FTP_CONNECT     Open a connection (and log in) to an FTP server
FTP_DISCONNECT     Close the connection (and log off) the FTP server
FU CSAP_MAT_BOM_READ     You can use this function module to display simple material BOMs. You cannot display BOM groups (for example, all variants of a variant BOM). as in transaction CS03. Current restrictions: You cannot display long texts. You cannot display sub-items. You cannot display classification data of BOM items for batches. You can only display one alternative or variant. You cannot enter an alternative for module CSAP_MAT_BOM_READ, so you always see alternative 01. The following example came from a posting on the SAP-R3-L mailing list.
Example:
data: begin of tstk2 occurs 0.
          include structure stko_api02.
data: end of tstk2.
data: begin of tstp2 occurs 0.
          include structure stpo_api02.
data: end of tstp2.
data: begin of tdep_data occurs 0.
         include structure csdep_data.
data: end of tdep_data.
data: begin of tdep_descr occurs 0.
         include structure csdep_descr.
data: end of tdep_descr.
data: begin of tdep_source occurs 0.
         include structure csdep_source.
data: end of tdep_source.
data: begin of tdep_order occurs 0.
         include structure csdep_order.
data: end of tdep_order.
data: begin of tdep_doc occurs 0.
         include structure csdep_doc.
data: end of tdep_doc.
data: flg_warning like capiflag-flwarning.
   call function 'CSAP_MAT_BOM_READ'
        exporting
             material   = 'MAT100'
             plant      = '0001'
             bom_usage = '1'
             valid_from = '20.12.1996'
           valid_to
        importing
             fl_warning = flg_warning
        tables
             t_stko       = tstk2
             t_stpo       = tstp2
             t_dep_data   = tdep_data
             t_dep_descr = tdep_descr
             t_dep_source = tdep_source
             t_dep_order = tdep_order
             t_dep_doc    = tdep_doc
        exceptions
             error      = 1.
Function Group GRAP is now obsolete.     SAP recommends using functions in function group SFES instead. Below is an overview of the changes.
G_SET_GET_ALL_VALUES     Fetch values from a set.
GET_CURRENT_YEAR     Get the current fiscal year.
Example:
CALL FUNCTION 'GET_CURRENT_YEAR'
EXPORTING
    BUKRS         = '1000'     " Company Code
    DATE          = SY-DATUM   " Date to find fiscal year for
IMPORTING
    CURRM         = w_currm    " Current Fiscal Month
    CURRY         = w_curry    " Current Fiscal Year
    PREVM         = w_prevm    " Previous Fiscal Month
    PREVY         = w_prevy.   " Previous Fiscal Year
GET_GLOBAL_SYMBOLS     Returns a list of all tables, select options, texts, etc for a program. Even includes the text definitions for the selection screen
GET_INCLUDETAB     Returns a list of all INCLUDES in a program
GET_JOB_RUNTIME_INFO
Get the current job number from a program. Also returns other useful info about the current job.
GUI_CREATE_DIRECTORY     Create a directory on the presentation server
GUI_DELETE_FILE     Replaces WS_FILE_DELETE. Delete a file on the presentation server
GUI_DOWNLOAD     Replaces WS_DOWNLOAD. Download table from the app server to presentation server
GUI_EXEC     Replaces WS_EXECUTE. Start a File or Program Asynchronously with WinExec
GUI_GET_DESKTOP_INFO     Replaces WS_QUERY. Delivers Information About the Desktop (client)
GUI_REMOVE_DIRECTORY     Delete a directory on the presentation server
GUI_RUN     Start a File or Program Asynchronously with ShellExecute
GUI_UPLOAD     Replaces WS_UPLOAD. Upoad file from presentation server to the app server
HELP_START     Display help for a field. Useful for doing AT SELECTION SCREEN ON VALUE REQUEST for those fields that do not provide F4 help at the DDIC level.
HELP_VALUES_GET_WITH_TABLE     Show a list of possible values for F4 popup help on selection screens. This function module pops up a screen that is just like all the other F4 helps, so it looks like the rest of the SAP system. Very useful for providing dropdowns on fields that do not have them predefined.
Example:
tables: t001w.
DATA: lc_werks      LIKE t001w-werks,
      ltab_fields LIKE help_value OCCURS 0 with header line,
      BEGIN OF ltab_values OCCURS 0,
        feld(40) TYPE c,
      END OF ltab_values.
*-- Set up fields to retrieve data
ltab_fields-tabname    = 'T001W'.
ltab_fields-fieldname = 'WERKS'.
ltab_fields-selectflag = 'X'.
APPEND ltab_fields.
ltab_fields-tabname    = 'T001W'.
ltab_fields-fieldname = 'NAME1'.
ltab_fields-selectflag = space.
APPEND ltab_fields.
*-- Fill values
select * from t001w.
    ltab_values-feld = t001w-werks.
    append ltab_values.
    ltab_values-feld = t001w-name1.
    append ltab_values.
endselect.
CALL FUNCTION 'HELP_VALUES_GET_WITH_TABLE'
     EXPORTING
          fieldname                 = 'WERKS'
          tabname                   = 'T001W'
          title_in_values_list      = 'Select a value'
     IMPORTING
          select_value              = lc_werks
     TABLES
          fields                    = ltab_fields
          valuetab                  = ltab_values
     EXCEPTIONS
          field_not_in_ddic         = 01
          more_then_one_selectfield = 02
          no_selectfield            = 03.
HOLIDAY_CHECK_AND_GET_INFO     Useful for determining whether or not a date is a holiday. Give the function a date, and a holiday calendar, and you can determine if the date is a holiday by checking the parameter HOLIDAY_FOUND.
Example:
data: ld_date                 like scal-datum default sy-datum,
      lc_holiday_cal_id       like scal-hcalid default 'CA',
      ltab_holiday_attributes like thol occurs 0 with header line,
      lc_holiday_found        like scal-indicator.
CALL FUNCTION 'HOLIDAY_CHECK_AND_GET_INFO'
EXPORTING
    date                               = ld_date
    holiday_calendar_id                = lc_holiday_cal_id
    WITH_HOLIDAY_ATTRIBUTES            = 'X'
IMPORTING
    HOLIDAY_FOUND                      = lc_holiday_found
tables
    holiday_attributes                 = ltab_holiday_attributes
EXCEPTIONS
    CALENDAR_BUFFER_NOT_LOADABLE       = 1
    DATE_AFTER_RANGE                   = 2
    DATE_BEFORE_RANGE                  = 3
    DATE_INVALID                       = 4
    HOLIDAY_CALENDAR_ID_MISSING        = 5
    HOLIDAY_CALENDAR_NOT_FOUND         = 6
    OTHERS                             = 7.
if sy-subrc = 0 and
   lc_holiday_found = 'X'.
write: / ld_date, 'is a holiday'.
else.
write: / ld_date, 'is not a holiday, or there was an error calling the function'.
endif.
HOLIDAY_GET     Provides a table of all the holidays based upon a Factory Calendar &/ Holiday Calendar.
HR_DISPLAY_BASIC_LIST     is an HR function, but can be used for any data. You pass it data, and column headers, and it provides a table control with the ability to manipulate the data, and send it to Word or Excel. Also see the additional documentation here.
HR_GET_LEAVE_DATA     Get all leave information (includes leave entitlement, used holidays/paid out holidays)
HR_IE_NUM_PRSI_WEEKS     Return the number of weeks between two dates.
HR_PAYROLL_PERIODS_GET
Get the payroll period for a particular date. (provided by Francois Henrotte)
Example:
DATA: IT_T549Q TYPE T549Q OCCURS 0 WITH HEADER LINE,
        IT_ZL TYPE PC2BF OCCURS 0 WITH HEADER LINE.
W_BEGDA = '20010101'.
W_PERNR = '00000001'.
CALL FUNCTION 'HR_PAYROLL_PERIODS_GET'
       EXPORTING
            get_begda       = w_begda
       TABLES
            get_periods     = it_t549q
       EXCEPTIONS
            no_period_found = 1
            no_valid_permo = 2.
CHECK sy-subrc = 0.
CALL FUNCTION 'HR_TIME_RESULTS_GET'
       EXPORTING
            get_pernr             = w_pernr
            get_pabrj             = it_t549q-pabrj
            get_pabrp             = it_t549q-pabrp
       TABLES
            get_zl                = it_zl
       EXCEPTIONS
            no_period_specified   = 1
            wrong_cluster_version = 2
            no_read_authority     = 3
            cluster_archived      = 4
            technical_error       = 5.
NOTE: it_zl-iftyp = 'A'   absence
      it_zl-iftyp = 'S'   at work
HR_TIME_RESULTS_GET
Get the time results for a payroll period. (provided by Francois Henrotte)
Example:
DATA: IT_T549Q TYPE T549Q OCCURS 0 WITH HEADER LINE,
        IT_ZL TYPE PC2BF OCCURS 0 WITH HEADER LINE.
W_BEGDA = '20010101'.
W_PERNR = '00000001'.
CALL FUNCTION 'HR_PAYROLL_PERIODS_GET'
       EXPORTING
            get_begda       = w_begda
       TABLES
            get_periods     = it_t549q
       EXCEPTIONS
            no_period_found = 1
            no_valid_permo = 2.
CHECK sy-subrc = 0.
CALL FUNCTION 'HR_TIME_RESULTS_GET'
       EXPORTING
            get_pernr             = w_pernr
            get_pabrj             = it_t549q-pabrj
            get_pabrp             = it_t549q-pabrp
       TABLES
            get_zl                = it_zl
       EXCEPTIONS
            no_period_specified   = 1
            wrong_cluster_version = 2
            no_read_authority     = 3
            cluster_archived      = 4
            technical_error       = 5.
NOTE: it_zl-iftyp = 'A'   absence
      it_zl-iftyp = 'S'   at work
INIT_TEXT     To load long text into SAP
K_WERKS_OF_BUKRS_FIND     Return a list of all plants for a given company code.
LIST_FROM_MEMORY     Retrieves the output of a report from memory when the report was executed using SUBMIT... EXPORTING LIST TO MEMORY. See also WRITE_LIST.
LIST_TO_ASCII     convert an ABAP report (displayed on screen) from OTF to ASCII format
MBEW_EXTEND
Get the stock position for the previous month. This displays the same info that you see in MM03.
MONTH_NAMES_GET     It returns all the month and names in repective language.
MONTH_PLUS_DETERMINE     Add or subtract months from a date. To subtract a month, enter a negative value for the 'months' parameter.
Example:
data: new_date type d.
CALL FUNCTION 'MONTH_PLUS_DETERMINE'
EXPORTING
    months        = -5       " Negative to subtract from old date, positive to add
    olddate       = sy-datum
IMPORTING
   NEWDATE       = new_date.
write: / new_date.
MS_EXCEL_OLE_STANDARD_OLE     will build a file, and automatically start Excel
OTF_CONVERT     wraps several other function modules. Will convert OTF to ASCII or PDF
POPUP_TO_CONFIRM_LOSS_OF_DATA     Create a dialog box in which you make a question whether the user wishes to perform a processing step with loss of data.
POPUP_TO_CONFIRM_STEP     Create a dialog box in which you make a question whether the user wishes to perform the step.
POPUP_TO_CONFIRM_WITH_MESSAGE     Create a dialog box in which you inform the user about a specific decision point during an action.
POPUP_TO_CONFIRM_WITH_VALUE     Create a dialog box in which you make a question whether the user wishes to perform a processing step with a particular object.
POPUP_TO_DECIDE     Provide user with several choices as radio buttons
POPUP_TO_DECIDE_WITH_MESSAGE     Create a dialog box in which you inform the user about a specific decision point via a diagnosis text.
POPUP_TO_DISPLAY_TEXT     Create a dialog box in which you display a two line message
POPUP_TO_SELECT_MONTH     Popup to choose a month
POPUP_WITH_TABLE_DISPLAY     Provide a display of a table for user to select one, with the value of the table line returned when selected.
PRICING     Return pricing conditions in an internal table. Use structure TCOMK for parameter COMM_HEAD_1, and structure TCOMP for parameter COMM_ITEM_1, and set CALCULATION_TYPE to B. The pricing conditions will be returned in XOMV. You must fill TCOMP, and TCOMK with the appropriate values before callling the function in order for it to work.
PROFILE_GET     Read an Entry in an INI File on the frontend
PROFILE_SET     Write an Entry in an INI File on the frontend
READ_TEXT     To load long text into SAP
REGISTRY_GET     Read an Entry from the Registry
REGISTRY_SET     Set an entry in the Registry
RFC_ABAP_INSTALL_AND_RUN     Runs an ABAP program that is stored in the table PROGRAM when the MODE = 'F'. Table WRITES contains the ouput of the program. Allows you to run a program without having the source code in the target system.
RH_GET_ACTIVE_WF_PLVAR     Return the active HR Plan
RH_GET_DATE_DAYNAME     return the day based on the date provied
RH_START_EXCEL_WITH_DATA     starts Excel with the contents of an internal table. This function finds Excel in the desktop registry. It also uses a local PC working directory to save the file (that's what the 'W' value for data path flag does). Very transparent to user!
RH_STRUC_GET     Returns all related org info
RHP0_POPUP_F4_SEARK
is a matchcode for any type of HR Planning object, including the possibility to fill the field that you want
Example:
Examples: search for any organizational structure
           F4 = 'X'
           PLVAR = '01'
           OTYPE = 'O '
          search for any persons
           F4 = 'X'
           PLVAR = '01'
           OTYPE = 'P '
           MULTI_SELECT = 'X' to allow multiple selection
           EASY = 'X' for user-dependent matchcode
Unfortunately, the use of table BASE_OBJIDS is disabled, so you can't specify
a root for the hierarchy you display
RKD_WORD_WRAP     Convert a long string or phrase into several lines.
RP_CALC_DATE_IN_INTERVAL     Add/subtract years/months/days from a date
RP_LAST_DAY_OF_MONTHS     Determine last day of month
RPY_DYNPRO_READ     Read dynpro, including screen flow
RPY_TRANSACTION_READ     Given a transaction, return the program and screen or given a program and screen, return the transactions that use the program and screen.
RS_COVERPAGE_SELECTIONS     Returns an internal table that contains a formatted list of all the selection parameters entered for a report. Table is ready to print out.
RS_REFRESH_FROM_SELECTOPTIONS     Get the current contents of selection screen
RS_SEND_MAIL_FOR_SPOOLLIST     Send message from ABAP/4 program to SAPoffice.
RS_VARIANT_CONTENTS     Returns the contents of the specified variant in a table.
RSPO_DOWNLOAD_SPOOLJOB     Download the spool from a program to a file. Requires spool number.
RSPO_RETURN_ABAP_SPOOLJOB     Fetch printer spool according to the spool number informed.
RZL_READ_DIR     If the server name is left blank, it reads a directory from local presentation server, otherwise it reads the directory of the remote server
RZL_READ_DIR_LOCAL     Read a directory on the Application Server
RZL_READ_FILE     Read a file from the presentation server if no server name is given, or read file from remote server. Very useful to avoid authority checks that occur doing an OPEN DATASET. This function using a SAP C program to read the data.
RZL_SLEEP     Hang the current application from 1 to 5 seconds.
RZL_SUBMIT     Submit a remote report.
RZL_WRITE_FILE_LOCAL     Saves table to the presentation server (not PC). Does not use OPEN DATASET, so it does not suffer from authority checks!
SAP_CONVERT_TO_XLS_FORMAT     Convert data to Microsoft Excel format.
SAPGUI_PROGRESS_INDICATOR     Display a progress bar on the SAP GUI, and give the user some idea of what is happening
SAVE_TEXT     To load long text into SAP
SCROLLING_IN_TABLE     If you are coding a module pool and using a table control, you can use this function SCROLLING_IN_TABLE to handle any scrolling. (provided by Paul Kjaer)
SD_DATETIME_DIFFERENCE     Give the difference in Days and Time for 2 dates
SO_NEW_DOCUMENT_ATT_SEND_API1     Send a document as part of an email. The documentation is better than normal for this function, so please read it.
SO_SPLIT_FILE_AND_PATH     Split a fully pathed filename into a filename and a path.
SO_SPOOL_READ     Fetch printer spool according to the spool number informed. See also RSPO_RETURN_ABAP_SPOOLJOB
SO_WIND_SPOOL_LIST     Browse printer spool numbers according to user informed.
SWD_HELP_F4_ORG_OBJECTS
HR Matchcode tailored for organizational units. Includes a button so that you can browse the hierarchy too.
SX_OBJECT_CONVERT_OTF_PDF     Conversion From OTF to PDF (SAPScript conversion)
SX_OBJECT_CONVERT_OTF_PRT     Conversion From OTF to Printer Format (SAPScript conversion)
SX_OBJECT_CONVERT_OTF_RAW     Conversion From OTF to ASCII (SAPScript conversion)
SXPG_CALL_SYSTEM     you can check the user's authorization for the specified command and run the command. The command runs on the host system on which the function module is executed. The function module is RFC capable. It can therefore be run on the host system at which a user happens to be active or on another designated host system at which an R/3 server is active.
SXPG_COMMAND_CHECK     Check whether the user is authorized to execute the specified command on the target host system with the specified arguments.
SXPG_COMMAND_DEFINITION_GET     Read the definition of a single external OS command from the R/3 System's database.
SXPG_COMMAND_EXECUTE     Check a user's authorization to use a command, as in SXPG_COMMAND_CHECK. If the authorization check is successful, then execute the command on the target host system.
SXPG_COMMAND_LIST_GET     Select a list of external OS command definitions.
TERMINAL_ID_GET     Return the terminal id
TH_DELETE_USER     Logoff a user. Similar results to using SM04.
TH_ENVIRONMENT     Get the UNIX environment
TH_POPUP     Display a popup system message on a specific users screen.
TH_REMOTE_TRANSACTION     Run a transaction on a remote server. Optionally provide BDC data to be used in the transaction
TH_USER_INFO     Give information about the current user (sessions, workstation logged in from, etc)
TH_USER_LIST     Show which users are logged into an app server
TMP_GUI_DIRECTORY_LIST_FILES     Retrieve all of the files and subdirectories on the Presentation Server (PC) for a given directory.
When a value other than * or . is used for the filter, you will not get any directories, unless they match your wildcard filter. For example, if you entered *.png, then only files and directories that end in png will be returned by the function.
Example:
data: lc_directory         like bdschko16-target_dir value 'C:\TEMP\',
       lc_filter(20)        type c default '.'.
       li_file_count        type i,
       li_dir_count         type i,
       ltab_dir_table       like sdokpath occurs 0 with header line,
       ltab_file_file_table like sdokpath occurs 0 with header line.
call function 'TMP_GUI_DIRECTORY_LIST_FILES'
exporting
    directory        = lc_directory
    filter           = lc_filter importing
    file_count       = li_file_count
    dir_count        = li_dir_count
tables
    file_table       = ltab_file_table
    dir_table        = ltab_dir_table
exceptions
    cntl_error       = 1
    others           = 2.
UNIT_CONVERSION_SIMPLE     convert weights from one UOM to another.
UPLOAD     upload a file to the presentation server (PC)
UPLOAD_FILES     Will load one or more files from app or presentation server
WEEK_GET_FIRST_DAY     For a given week (YYYYMM format), this function returns the date of the Monday of that week.
WRITE_LIST     Useful for writing out the list contents that result from the function LIST_FROM_MEMORY.
WS_DOWNLOAD     Save Internal Table as File on the Presentation Server
WS_EXCEL     Start EXCEL on the PC
WS_EXECUTE     execute a program on a windows PC
WS_FILE_DELETE     Delete File at the Frontend
WS_FILENAME_GET     Call File Selector
WS_MSG     Create a dialog box in which you display an one line message
WS_UPLOAD     Load Files from the Presentation Server to Internal ABAP Tables
WS_VOLUME_GET     Get the label from a frontend device.
WWW_LIST_TO_HTML     After running a report, call this function to convert the list output to HTML.
hope it will help you.
Regards,
Sreelatha gullapalli

Standard function module for checking the sales organization and plant

Hi all,
    Does have standard function module for checking the relationship between sales organization and plant?
Thanks a lot!
Nina

hi
good
check these BAPIS
BAPI_SALESGROUP_GET_DETAIL     Sales Group: Display Name
BAPI_SALESOFFICE_GET_DETAIL    Sales Office: Display Name
BAPI_SALESOFFICE_GRP_EXIST     Sales Office / Sales Group: Existence Check
BAPI_SALESORG_EXIST            Sales Organization: Existence Check
BAPI_SALESORG_GET_DETAIL       Sales Organization: Display Data
BAPI_SALESORG_OFFICE_EXIST     Sales Organization / Sales Office: Existence Check
PLANT=>
BAPI_PROMO_GETSITEPLANNING     Detailed Data for the Plants Involved in a Promotion
thanks
mrutyun^

Function Module for getting the desired date

Hi All,
I need a function module where in get the date value from Current date - 540 days.
i,e System Date - 540 days = ????
Thanks
Suresh

previous FM works good , this is for ur info , to give in month, date and year instead of onlly days
CALL FUNCTION 'RP_CALC_DATE_IN_INTERVAL'
    EXPORTING
      date      = sy-datum
      months    = '00'
      days      = '07'
      years     = '00'
      signum    = '-'
    IMPORTING
      calc_date = w_due_date.
Message was edited by: chandrasekhar jagarlamudi
Message was edited by: chandrasekhar jagarlamudi

Function Module for calculating NEXT MONTH's start date and End date

Hi Friends,
I want a function module which could calculate the next months start date and end date...
Say my input will be like 01.01.2006(start date) it should return
01.02.2006 and 28.02.2006...
IS there any FM for this ... or how to go about this scenario ???
thanks in advance
Cheers,
R.Kripa

Hi kripa,
1. There is no DIRECT Way.
2. We have to do in 2 steps.
3. See this code (just copy paste in new program)
   U can use its FORM anywhere in your program,
   for getting the desired dates.
4.
REPORT abc.
DATA : sdate TYPE sy-datum,
       edate TYPE sy-datum.
PARAMETERS : dt TYPE sy-datum DEFAULT sy-datum.
PERFORM getdt USING dt sdate edate.
WRITE :/ sdate , edate.
INDEPENDENT FORM
FORM getdt USING orgdate stdate enddate.
DATA : mydate TYPE sy-datum.
CALL FUNCTION 'HR_PSD_DATES_ADD_MONTHS'
    EXPORTING
      v_date             = orgdate
      V_MONTHS           = 1
   IMPORTING
     E_DATE             = mydate
   EXCEPTIONS
     NOT_POSITIVE       = 1
     OTHERS             = 2
CALL FUNCTION 'HR_JP_MONTH_BEGIN_END_DATE'
    EXPORTING
      iv_date             = mydate
    IMPORTING
      ev_month_begin_date = stdate
      ev_month_end_date   = enddate.
ENDFORM.                    "getdt
regards,
amit m.

Function module for calculating next day's date

Dear all,
We have a requirement of displaying transaction validity date on SAP smart form. The date input is available from the transaction.
We need to add 1 day to this to get correct date printed in the output. We applied the logic of 'input date +1', but this logic does not give correct output when the final date co-incides with change in month (i.e 1st of next month).
Is there any function module available which would do the addition in proper date format and calculate next day's date correctly?
Regards,
DS

Use FM RP_CALC_DATE_IN_INTERVAL
Example :
data: v_curr type sy-datum,
v_next type sy-datum.
v_curr = '20080415'.
CALL FUNCTION 'RP_CALC_DATE_IN_INTERVAL'
EXPORTING
DATE = v_curr
DAYS = '01'
MONTHS = '0'
SIGNUM = '+'
YEARS = 0
IMPORTING
CALC_DATE = v_next.
write:/5 'Current date', v_curr.
write:/5 'Future date', v_next.

Code for calculating variance between plan and actual in Co module

Hi Abbapers,
I have to develop a 2 fresh report : One for calculating the variance for the Plan/Actual in controlling and second for sales variance for the month Jan to Dec .
I need your help as I have to complete this reports in this week . Its Bit urgent.
Can you please help me with the sample code or any of the similar report which you might have created as I am bit new in ABAP. Please reply asap.
Thanks in advance!
Best Regards.

Hi Deepak,
For Finished Goods materials if you assigned Price control V (Moving Average) it is irrelevant to run the Standard Cost Estimation.
My earlier client we don't have variance because of the Moving Average Price for Finished Goods.
Please check, It is really required Variance?? If it is required check whether variance key is automatically assigned to Process order or not. (Control Tab)
Ravi Polampalli

Function Module for Creation of classification data for a Routing

Hi
Can you please let me know if there are any function modules/Bapi's to create Classification data for a Routing?
THanks
Shekar

For creating classification data, have a look at the function group CTMS and function module CTMS_DDB_SET_VALUE_INTERNAL.
Not sure what you mean by "Routing".
For BAPIs also look into the function group CLBPA, that sits in the same development package CLCL as the function group CTMS.
Hope this helps.

Function Module for calculation of the net price of a configurable material

Hi,
I would like to know if a function module allows to calculate the purchasing /net price of a configurable material at a vendor and at a requested delivery date before the creation of a purchasing order.
For configurable materials, we have no PIR and no moving / standard price thus the valuation price in the PR is blank.
I would like to fill in the field "valuation price" in the PR with the net price we can find in the PO.
However the PR is created before the PO.
Thanks a lot in advance for yours reply.
regards,

hi Pravenn,
I don't know about these functions, but u can try anything like this:
data:
strdate like sy-datum value '20070901',
      enddate like sy-datum value '20070909',
      date(10),
      moddate(1).
date = enddate - strdate + 1.
moddate = date mod 7.
date = date div 7.
if moddate <> 0.
date = date + 1.
endif.
write: / date.
Regards
Allan Cristian
Message was edited by:
        Allan Cristian

Function Module for Info Record conditions data

Hi, ALL
I'm looking for a Function Modlue or Method that we can insert conditions datas of Info Record.
Also, I'm looking for a FM that we can update them, and get these infomations.
Plese let me know if you know these.
Regards
Rie

hi,
For reading the purchase price, use the function module BASIC_PURCHASE_PRICE_READ ...function group WVKC (development class WVKP)
you can also check sap note 565002 for more info...
Regards
Priyanka.P

Function Module for calculating hours between dates and their times.

Similar Messages

Maybe you are looking for