Function module for calculating next day's date
Dear all,
We have a requirement of displaying transaction validity date on SAP smart form. The date input is available from the transaction.
We need to add 1 day to this to get correct date printed in the output. We applied the logic of 'input date +1', but this logic does not give correct output when the final date co-incides with change in month (i.e 1st of next month).
Is there any function module available which would do the addition in proper date format and calculate next day's date correctly?
Regards,
DS
Use FM RP_CALC_DATE_IN_INTERVAL
Example :
data: v_curr type sy-datum,
v_next type sy-datum.
v_curr = '20080415'.
CALL FUNCTION 'RP_CALC_DATE_IN_INTERVAL'
EXPORTING
DATE = v_curr
DAYS = '01'
MONTHS = '0'
SIGNUM = '+'
YEARS = 0
IMPORTING
CALC_DATE = v_next.
write:/5 'Current date', v_curr.
write:/5 'Future date', v_next.
Similar Messages
-
Function Module for calculating NEXT MONTH's start date and End date
Hi Friends,
I want a function module which could calculate the next months start date and end date...
Say my input will be like 01.01.2006(start date) it should return
01.02.2006 and 28.02.2006...
IS there any FM for this ... or how to go about this scenario ???
thanks in advance
Cheers,
R.KripaHi kripa,
1. There is no DIRECT Way.
2. We have to do in 2 steps.
3. See this code (just copy paste in new program)
U can use its FORM anywhere in your program,
for getting the desired dates.
4.
REPORT abc.
DATA : sdate TYPE sy-datum,
edate TYPE sy-datum.
PARAMETERS : dt TYPE sy-datum DEFAULT sy-datum.
PERFORM getdt USING dt sdate edate.
WRITE :/ sdate , edate.
INDEPENDENT FORM
FORM getdt USING orgdate stdate enddate.
DATA : mydate TYPE sy-datum.
CALL FUNCTION 'HR_PSD_DATES_ADD_MONTHS'
EXPORTING
v_date = orgdate
V_MONTHS = 1
IMPORTING
E_DATE = mydate
EXCEPTIONS
NOT_POSITIVE = 1
OTHERS = 2
CALL FUNCTION 'HR_JP_MONTH_BEGIN_END_DATE'
EXPORTING
iv_date = mydate
IMPORTING
ev_month_begin_date = stdate
ev_month_end_date = enddate.
ENDFORM. "getdt
regards,
amit m. -
Function Module for calculating hours between dates and their times.
Hi all,
Is there any standard function module for calculating the time difference in hours between two dates with start and end times.
Regards,
Sudipto.Sudipto,
How're you ????????????????????
Check out the following Function Module:
SD_DATETIME_DIFFERENCE (Give the difference in Days and Time for 2 dates)
Regards,
Abir
Don't forget to award Points * -
Function module for calculating planned and actual cost of production order
Hi ,
Do we have any standard function module for calculating planned and actual cost for production order?
i need to implement this in a Z-report.
Thanks
SriniHi,
try below function module
CRMCO_GET_PLAN_ACTUAL_COSTS
CO_IH_GET_PLANNED_COSTS_TOTAL
Regards,
Sankaran -
Function module for getting starting day of a week form current data
Hi ,
Is there any function module that gives starting day of week when we give a particular date
eg: today date is 19-12-2007
if i give this date as input i should get 16-12-2007 because this is starting day of this week .Hi,
Use FM GET_WEEK_INFO_BASED_ON_DATE
You will get the first day of the week in export parameter MONDAY
Lokesh -
Function module for calculating sigma balance
Is there any function module available in SAP for calculating sigma balance.
Thanks
Gauravhi
ABAP_DOCU_DOWNLOAD Download ABAP documentation in HTML format.
APPL_LOG_DELETE With this function module you delete logs in the database according to specified selection conditions
APPL_LOG_DISPLAY With this function module you can analyze logs in the database.
APPL_LOG_DISPLAY_INTERN With this function module you can analyze logs in local memory, e.g. when you have only collected log records at runtime and do not want to write to the database.
APPL_LOG_INIT This function module checks whether the specified object or sub-object exists and deletes all existing associated data in local memory.
APPL_LOG_READ_DB With this function module you read the log data in the database for an object or sub-object according to specified selection conditions.
APPL_LOG_READ_INTERN With this function module you read all log data whose log class has at least the specified value, from local memory, for the specified object or sub-object.
APPL_LOG_SET_OBJECT With this function module, you create a new object or sub-object for writing in local memory. With a flag you can control whether the APPL_LOG_WRITE_... messages are written in local memory or are output on the screen.
APPL_LOG_WRITE_DB With this function module you write all data for the specified object or sub-object in local memory to the database. If the log for the object or sub-object in question is new, the log number is returned to the calling program.
APPL_LOG_WRITE_HEADER With this function module, you write the log header data in local memory.
APPL_LOG_WRITE_LOG_PARAMETERS With this function module, you write the name of the log parameters and the associated values for the specified object or sub-object in local memory. If this function module is called repeatedly for the same object or sub-object, the existing parameters are updated accordingly. If you do not specify an object or sub-object with the call, the most recently used is assumed.
APPL_LOG_WRITE_MESSAGE_PARAMS With this function module you write a single message, with parameters, in local memory. Otherwise the function module works like APPL_LOG_WRITE_SINGLE_MESSAGE.
APPL_LOG_WRITE_MESSAGES With this function module you write one or more messages, without parameters, in local memory.
APPL_LOG_WRITE_SINGLE_MESSAGE With this function module you write a single message, without parameters, in local memory. If no header entry has yet been written for the object or sub-object, it is created. If you do not specify an object or sub-object with the call, the most recently used is assumed.
ARFC_GET_TID will return the IP address of the terminal in hex.
BAL_CNTL_CREATE Create Control for log display
BAL_CNTL_FREE Release Control
BAL_CNTL_REFRESH Put new data in log display
BAL_DB_DELETE Delete logs from the database
BAL_DB_DEQUEUE Unlock log
BAL_DB_ENQUEUE Lock log
BAL_DB_LOAD Load logs from the database
BAL_DB_LOAD Load log(s)
BAL_DB_SAVE Save logs in the database
BAL_DB_SAVE Save log(s)
BAL_DB_SAVE_PREPARE Prepare save
BAL_DB_SEARCH Find logs in the database
BAL_DSP_LOG_DISPLAY Display messages in memory
BAL_DSP_LOG_DISPLAY Display Log
BAL_DSP_LOG_PARAMETERS Either output extended long text or call a callback routine (based on the data in BAL_S_LOG-PARAMS)
BAL_DSP_LOG_TECHNICAL_DATA Output all log header data
BAL_DSP_MSG_LONGTEXT Display message long text
BAL_DSP_MSG_PARAMETERS Either output extended long text or call a callback routine (based on the data in BAL_S_MSG-PARAMS)
BAL_DSP_MSG_TECHNICAL_DATA Output technical data of a message such as work area, error number, etc.
BAL_DSP_OUTPUT_FREE End output
BAL_DSP_OUTPUT_INIT Initialize output
BAL_DSP_OUTPUT_SET_DATA Set dataset to be displayed
BAL_DSP_PROFILE_DETLEVEL_GET Message hierarchy in DETLEVEL
BAL_DSP_PROFILE_NO_TREE_GET Display without tree (fullscreen)
BAL_DSP_PROFILE_POPUP_GET Display without tree (popup)
BAL_DSP_PROFILE_SINGLE_LOG_GET Standard profile (SLG1) for one log
BAL_DSP_PROFILE_STANDARD_GET Standard profile (SLG1) for a lot of logs
BAL_GLB_AUTHORIZATION_GET Assign authorization
BAL_GLB_AUTHORIZATION_RESET Reset authorization
BAL_GLB_CONFIG_GET Read configuration
BAL_GLB_CONFIG_SET Set configuration
BAL_GLB_MEMORY_EXPORT Put function group memory in ABAP-MEMORY
BAL_GLB_MEMORY_IMPORT Get function group memory from ABAP-MEMORY
BAL_GLB_MEMORY_REFRESH (Partially) reset global memory
BAL_GLB_MEMORY_REFRESH (Partially) initialize memory
BAL_GLB_MSG_CURRENT_HANDLE_GET Get current message handle
BAL_GLB_MSG_DEFAULTS_GET Get message defaults
BAL_GLB_SEARCH_LOG Find logs in memory
BAL_GLB_SEARCH_MSG Find messages in memory
BAL_LOG_CREATE Create log with header data
BAL_LOG_CREATE Create log with header data
BAL_LOG_DELETE Delete log (from database also at Save)
BAL_LOG_EXIST Check existence of a log in memory
BAL_LOG_HDR_CHANGE Change log header
BAL_LOG_HDR_CHECK Check log header data for consistency
BAL_LOG_HDR_READ Read log header and other data
BAL_LOG_MSG_ADD Put message in log
BAL_LOG_MSG_ADD Put message in log
BAL_LOG_MSG_CHANGE Change message
BAL_LOG_MSG_CHANGE Change message
BAL_LOG_MSG_CHECK Check message data for consistency
BAL_LOG_MSG_CUMULATE Add message cumulated
BAL_LOG_MSG_DELETE Delete message
BAL_LOG_MSG_DELETE Delete message
BAL_LOG_MSG_EXIST Check existence of a message in memory
BAL_LOG_MSG_READ Read message and other data
BAL_LOG_MSG_REPLACE Replace last message
BAL_LOG_REFRESH Delete log from memory
BAL_LOG_REFRESH Delete log from memory
BAL_MSG_DISPLAY_ABAP Output message as ABAP-MESSAGE
BAL_OBJECT_SELECT Read Application Log objects table record
BAL_OBJECT_SUBOBJECT Check whether object and subobject exist and the combination is allowed
BAL_SUBOBJECT_SELECT Read subobject table record
BP_EVENT_RAISE Trigger an event from ABAP/4 program
BP_JOBLOG_READ Fetch job log executions
CHANGEDOCUMENT_READ_HEADERS Get the change document header for a sales document, and put the results in an internal table.
Example:
CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
EXPORTING
objectclass = 'EINKBELEG'
objectid = l_objectid
username = space
TABLES
i_cdhdr = lt_cdhdr.
LOOP AT lt_cdhdr WHERE udate IN s_aedat.
CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
EXPORTING
changenumber = lt_cdhdr-changenr
TABLES
editpos = lt_editpos.
LOOP AT lt_editpos WHERE fname = 'LOEKZ'
AND f_new = 'L'.
p_desc = text-r01. " Cancel Contract
ENDLOOP.
ENDLOOP.
CHANGEDOCUMENT_READ_POSITIONS Get the details of a change document, and store them in an internal table. This will tell you whether a field was changed, deleted, or updated.
Example:
CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
EXPORTING
objectclass = 'EINKBELEG'
objectid = l_objectid
username = space
TABLES
i_cdhdr = lt_cdhdr.
LOOP AT lt_cdhdr WHERE udate IN s_aedat.
CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
EXPORTING
changenumber = lt_cdhdr-changenr
TABLES
editpos = lt_editpos.
LOOP AT lt_editpos WHERE fname = 'LOEKZ'
AND f_new = 'L'.
p_desc = text-r01. " Cancel Contract
ENDLOOP.
ENDLOOP.
CLAF_CLASSIFICATION_OF_OBJECTS Return all of the characteristics for a material
CLOI_PUT_SIGN_IN_FRONT Move the negative sign from the left hand side of a number, to the right hand side of the number. Note that The result will be left justified (like all character fields), not right justifed as numbers normally are.
CLPB_EXPORT Export a text table to the clipboard (on presentation server)
CLPB_IMPORT Import a Text Table from the Clipboard (on presentation server)
COMMIT_TEXT To load long text into SAP
CONVERSION_EXIT_ALPHA_INPUT converts any number into a string fill with zeroes, with the number at the extreme right
Example:
input = 123
output = 0000000000000...000000000000123
CONVERSION_EXIT_ALPHA_OUTPUT converts any number with zeroes right into a simple integer
Example:
input = 00000000000123
output = 123
CONVERT_ABAPSPOOLJOB_2_PDF convert abap spool output to PDF
CONVERT_OTF Convert SAP documents (SAPScript) to other types.
Example:
CALL FUNCTION "CONVERT_OTF"
EXPORTING FORMAT = "PDF"
IMPORTING BIN_FILESIZE = FILE_LEN
TABLES OTF = OTFDATA
LINES = PDFDATA
EXCEPTIONS ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
OTHERS = 4.
CONVERT_OTFSPOOLJOB_2_PDF converts a OTF spool to PDF (i.e. Sapscript document)
CONVERT_TO_FOREIGN_CURRENCY Convert local currency to foreign currency.
CONVERT_TO_LOCAL_CURRENCY Convert from foreign currency to local currency
DATE_CHECK_PLAUSIBILITY Check to see if a date is in a valid format for SAP. Works well when validating dates being passed in from other systems.
DATE_COMPUTE_DAY Returns a number indicating what day of the week the date falls on. Monday is returned as a 1, Tuesday as 2, etc.
DATE_GET_WEEK will return the week that a date is in.
DATE_IN_FUTURE Calculate a date N days in the future.
DAY_ATTRIBUTES_GET
Return useful information about a day. Will tell you the day of the week as a word (Tuesday), the day of the week (2 would be Tuedsay), whether the day is a holiday, and more.(provided by Francois Henrotte)
DOWNLOAD download a file to the presentation server (PC)
DYNP_VALUES_READ Read the values from a dynpro. This function can be used to read the values from a report's selection screen too (Another example).
DYNP_VALUES_UPDATE Similar to DYNP_VALUES_READ, this function will allow the updating of fields on a dynpro. Very useful when you want to change a field based on the value entered for another field.
ENQUE_SLEEP Wait a specified period of time before continuing processing.
ENQUEUE_ESFUNCTION Lock an abap program so that it cannot be executed.
Example:
Set the parameters as follows:
RELID = 'ZZ'
SRTF2 = 0
SRTF = (your report name)
Please note that you should not use SY-REPID to pass your report name to the function. The value of SY-REPID will change as it is being passed to the function module, and will no longer hold the value of the calling report.
EPS_GET_DIRECTORY_LISTING return a list of filenames from a local or network drive
EPS_GET_FILE_ATTRIBUTES Pass in a filename and a path, and will return attributes for the file
F4_DATE displays a calendar in a popup window and allows user to choose a date, or it can be displayed read only.
F4_IF_FIELD_VALUE_REQUEST Use values from a DDIC table to provide a list of possible values. TABNAME and FIELDNAME are required fields, and when MULTIPLE_CHOICE is selected, more than one value can be returned.
F4IF_INT_TABLE_VALUE_REQUEST F4 help that returns the values selected in an internal table. Very handy when programming your very own F4 help for a field.
Example:
data:
begin of t_values occurs 2,
value like kna1-begru,
end of t_values,
t_return like ddshretval occurs 0 with header line.
t_values = 'PAR*'.
append t_values.
t_values = 'UGG'.
append t_values.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield = 'BEGRU'
value_org = 'S'
tables
value_tab = t_values
return_tab = t_return
exceptions
parameter_error = 1
no_values_found = 2
others = 3.
if sy-subrc = 0.
read table t_return index 1.
o_begru-low = t_return-fieldval.
if o_begru-low = 'PAR*'.
o_begru-option = 'CP'.
else.
o_begru-option = 'EQ'.
endif.
o_begru-sign = 'I'.
append o_begru to s_begru.
else.
o_begru = i_begru.
endif.
F4IF_SHLP_EXIT_EXAMPLE documents the different reasons to use a search help exit, and shows how it is done.
F4IP_INT_TABLE_VALUE_REQUEST This function does not exist in 4.6 and above. Use F4IF_INT_TABLE_VALUE_REQUEST instead.
FILENAME_GET popup to get a filename from a user, returns blank filename if user selects cancel
FORMAT_MESSAGE Takes a message id and number, and puts it into a variable. Works better than WRITE_MESSAGE, since some messages use $ as a place holder, and WRITE_MESSAGE does not accommadate that, it only replaces the ampersands (&) in the message.
FTP_COMMAND Execute a command on the FTP server
FTP_CONNECT Open a connection (and log in) to an FTP server
FTP_DISCONNECT Close the connection (and log off) the FTP server
FU CSAP_MAT_BOM_READ You can use this function module to display simple material BOMs. You cannot display BOM groups (for example, all variants of a variant BOM). as in transaction CS03. Current restrictions: You cannot display long texts. You cannot display sub-items. You cannot display classification data of BOM items for batches. You can only display one alternative or variant. You cannot enter an alternative for module CSAP_MAT_BOM_READ, so you always see alternative 01. The following example came from a posting on the SAP-R3-L mailing list.
Example:
data: begin of tstk2 occurs 0.
include structure stko_api02.
data: end of tstk2.
data: begin of tstp2 occurs 0.
include structure stpo_api02.
data: end of tstp2.
data: begin of tdep_data occurs 0.
include structure csdep_data.
data: end of tdep_data.
data: begin of tdep_descr occurs 0.
include structure csdep_descr.
data: end of tdep_descr.
data: begin of tdep_source occurs 0.
include structure csdep_source.
data: end of tdep_source.
data: begin of tdep_order occurs 0.
include structure csdep_order.
data: end of tdep_order.
data: begin of tdep_doc occurs 0.
include structure csdep_doc.
data: end of tdep_doc.
data: flg_warning like capiflag-flwarning.
call function 'CSAP_MAT_BOM_READ'
exporting
material = 'MAT100'
plant = '0001'
bom_usage = '1'
valid_from = '20.12.1996'
valid_to
importing
fl_warning = flg_warning
tables
t_stko = tstk2
t_stpo = tstp2
t_dep_data = tdep_data
t_dep_descr = tdep_descr
t_dep_source = tdep_source
t_dep_order = tdep_order
t_dep_doc = tdep_doc
exceptions
error = 1.
Function Group GRAP is now obsolete. SAP recommends using functions in function group SFES instead. Below is an overview of the changes.
G_SET_GET_ALL_VALUES Fetch values from a set.
GET_CURRENT_YEAR Get the current fiscal year.
Example:
CALL FUNCTION 'GET_CURRENT_YEAR'
EXPORTING
BUKRS = '1000' " Company Code
DATE = SY-DATUM " Date to find fiscal year for
IMPORTING
CURRM = w_currm " Current Fiscal Month
CURRY = w_curry " Current Fiscal Year
PREVM = w_prevm " Previous Fiscal Month
PREVY = w_prevy. " Previous Fiscal Year
GET_GLOBAL_SYMBOLS Returns a list of all tables, select options, texts, etc for a program. Even includes the text definitions for the selection screen
GET_INCLUDETAB Returns a list of all INCLUDES in a program
GET_JOB_RUNTIME_INFO
Get the current job number from a program. Also returns other useful info about the current job.
GUI_CREATE_DIRECTORY Create a directory on the presentation server
GUI_DELETE_FILE Replaces WS_FILE_DELETE. Delete a file on the presentation server
GUI_DOWNLOAD Replaces WS_DOWNLOAD. Download table from the app server to presentation server
GUI_EXEC Replaces WS_EXECUTE. Start a File or Program Asynchronously with WinExec
GUI_GET_DESKTOP_INFO Replaces WS_QUERY. Delivers Information About the Desktop (client)
GUI_REMOVE_DIRECTORY Delete a directory on the presentation server
GUI_RUN Start a File or Program Asynchronously with ShellExecute
GUI_UPLOAD Replaces WS_UPLOAD. Upoad file from presentation server to the app server
HELP_START Display help for a field. Useful for doing AT SELECTION SCREEN ON VALUE REQUEST for those fields that do not provide F4 help at the DDIC level.
HELP_VALUES_GET_WITH_TABLE Show a list of possible values for F4 popup help on selection screens. This function module pops up a screen that is just like all the other F4 helps, so it looks like the rest of the SAP system. Very useful for providing dropdowns on fields that do not have them predefined.
Example:
tables: t001w.
DATA: lc_werks LIKE t001w-werks,
ltab_fields LIKE help_value OCCURS 0 with header line,
BEGIN OF ltab_values OCCURS 0,
feld(40) TYPE c,
END OF ltab_values.
*-- Set up fields to retrieve data
ltab_fields-tabname = 'T001W'.
ltab_fields-fieldname = 'WERKS'.
ltab_fields-selectflag = 'X'.
APPEND ltab_fields.
ltab_fields-tabname = 'T001W'.
ltab_fields-fieldname = 'NAME1'.
ltab_fields-selectflag = space.
APPEND ltab_fields.
*-- Fill values
select * from t001w.
ltab_values-feld = t001w-werks.
append ltab_values.
ltab_values-feld = t001w-name1.
append ltab_values.
endselect.
CALL FUNCTION 'HELP_VALUES_GET_WITH_TABLE'
EXPORTING
fieldname = 'WERKS'
tabname = 'T001W'
title_in_values_list = 'Select a value'
IMPORTING
select_value = lc_werks
TABLES
fields = ltab_fields
valuetab = ltab_values
EXCEPTIONS
field_not_in_ddic = 01
more_then_one_selectfield = 02
no_selectfield = 03.
HOLIDAY_CHECK_AND_GET_INFO Useful for determining whether or not a date is a holiday. Give the function a date, and a holiday calendar, and you can determine if the date is a holiday by checking the parameter HOLIDAY_FOUND.
Example:
data: ld_date like scal-datum default sy-datum,
lc_holiday_cal_id like scal-hcalid default 'CA',
ltab_holiday_attributes like thol occurs 0 with header line,
lc_holiday_found like scal-indicator.
CALL FUNCTION 'HOLIDAY_CHECK_AND_GET_INFO'
EXPORTING
date = ld_date
holiday_calendar_id = lc_holiday_cal_id
WITH_HOLIDAY_ATTRIBUTES = 'X'
IMPORTING
HOLIDAY_FOUND = lc_holiday_found
tables
holiday_attributes = ltab_holiday_attributes
EXCEPTIONS
CALENDAR_BUFFER_NOT_LOADABLE = 1
DATE_AFTER_RANGE = 2
DATE_BEFORE_RANGE = 3
DATE_INVALID = 4
HOLIDAY_CALENDAR_ID_MISSING = 5
HOLIDAY_CALENDAR_NOT_FOUND = 6
OTHERS = 7.
if sy-subrc = 0 and
lc_holiday_found = 'X'.
write: / ld_date, 'is a holiday'.
else.
write: / ld_date, 'is not a holiday, or there was an error calling the function'.
endif.
HOLIDAY_GET Provides a table of all the holidays based upon a Factory Calendar &/ Holiday Calendar.
HR_DISPLAY_BASIC_LIST is an HR function, but can be used for any data. You pass it data, and column headers, and it provides a table control with the ability to manipulate the data, and send it to Word or Excel. Also see the additional documentation here.
HR_GET_LEAVE_DATA Get all leave information (includes leave entitlement, used holidays/paid out holidays)
HR_IE_NUM_PRSI_WEEKS Return the number of weeks between two dates.
HR_PAYROLL_PERIODS_GET
Get the payroll period for a particular date. (provided by Francois Henrotte)
Example:
DATA: IT_T549Q TYPE T549Q OCCURS 0 WITH HEADER LINE,
IT_ZL TYPE PC2BF OCCURS 0 WITH HEADER LINE.
W_BEGDA = '20010101'.
W_PERNR = '00000001'.
CALL FUNCTION 'HR_PAYROLL_PERIODS_GET'
EXPORTING
get_begda = w_begda
TABLES
get_periods = it_t549q
EXCEPTIONS
no_period_found = 1
no_valid_permo = 2.
CHECK sy-subrc = 0.
CALL FUNCTION 'HR_TIME_RESULTS_GET'
EXPORTING
get_pernr = w_pernr
get_pabrj = it_t549q-pabrj
get_pabrp = it_t549q-pabrp
TABLES
get_zl = it_zl
EXCEPTIONS
no_period_specified = 1
wrong_cluster_version = 2
no_read_authority = 3
cluster_archived = 4
technical_error = 5.
NOTE: it_zl-iftyp = 'A' absence
it_zl-iftyp = 'S' at work
HR_TIME_RESULTS_GET
Get the time results for a payroll period. (provided by Francois Henrotte)
Example:
DATA: IT_T549Q TYPE T549Q OCCURS 0 WITH HEADER LINE,
IT_ZL TYPE PC2BF OCCURS 0 WITH HEADER LINE.
W_BEGDA = '20010101'.
W_PERNR = '00000001'.
CALL FUNCTION 'HR_PAYROLL_PERIODS_GET'
EXPORTING
get_begda = w_begda
TABLES
get_periods = it_t549q
EXCEPTIONS
no_period_found = 1
no_valid_permo = 2.
CHECK sy-subrc = 0.
CALL FUNCTION 'HR_TIME_RESULTS_GET'
EXPORTING
get_pernr = w_pernr
get_pabrj = it_t549q-pabrj
get_pabrp = it_t549q-pabrp
TABLES
get_zl = it_zl
EXCEPTIONS
no_period_specified = 1
wrong_cluster_version = 2
no_read_authority = 3
cluster_archived = 4
technical_error = 5.
NOTE: it_zl-iftyp = 'A' absence
it_zl-iftyp = 'S' at work
INIT_TEXT To load long text into SAP
K_WERKS_OF_BUKRS_FIND Return a list of all plants for a given company code.
LIST_FROM_MEMORY Retrieves the output of a report from memory when the report was executed using SUBMIT... EXPORTING LIST TO MEMORY. See also WRITE_LIST.
LIST_TO_ASCII convert an ABAP report (displayed on screen) from OTF to ASCII format
MBEW_EXTEND
Get the stock position for the previous month. This displays the same info that you see in MM03.
MONTH_NAMES_GET It returns all the month and names in repective language.
MONTH_PLUS_DETERMINE Add or subtract months from a date. To subtract a month, enter a negative value for the 'months' parameter.
Example:
data: new_date type d.
CALL FUNCTION 'MONTH_PLUS_DETERMINE'
EXPORTING
months = -5 " Negative to subtract from old date, positive to add
olddate = sy-datum
IMPORTING
NEWDATE = new_date.
write: / new_date.
MS_EXCEL_OLE_STANDARD_OLE will build a file, and automatically start Excel
OTF_CONVERT wraps several other function modules. Will convert OTF to ASCII or PDF
POPUP_TO_CONFIRM_LOSS_OF_DATA Create a dialog box in which you make a question whether the user wishes to perform a processing step with loss of data.
POPUP_TO_CONFIRM_STEP Create a dialog box in which you make a question whether the user wishes to perform the step.
POPUP_TO_CONFIRM_WITH_MESSAGE Create a dialog box in which you inform the user about a specific decision point during an action.
POPUP_TO_CONFIRM_WITH_VALUE Create a dialog box in which you make a question whether the user wishes to perform a processing step with a particular object.
POPUP_TO_DECIDE Provide user with several choices as radio buttons
POPUP_TO_DECIDE_WITH_MESSAGE Create a dialog box in which you inform the user about a specific decision point via a diagnosis text.
POPUP_TO_DISPLAY_TEXT Create a dialog box in which you display a two line message
POPUP_TO_SELECT_MONTH Popup to choose a month
POPUP_WITH_TABLE_DISPLAY Provide a display of a table for user to select one, with the value of the table line returned when selected.
PRICING Return pricing conditions in an internal table. Use structure TCOMK for parameter COMM_HEAD_1, and structure TCOMP for parameter COMM_ITEM_1, and set CALCULATION_TYPE to B. The pricing conditions will be returned in XOMV. You must fill TCOMP, and TCOMK with the appropriate values before callling the function in order for it to work.
PROFILE_GET Read an Entry in an INI File on the frontend
PROFILE_SET Write an Entry in an INI File on the frontend
READ_TEXT To load long text into SAP
REGISTRY_GET Read an Entry from the Registry
REGISTRY_SET Set an entry in the Registry
RFC_ABAP_INSTALL_AND_RUN Runs an ABAP program that is stored in the table PROGRAM when the MODE = 'F'. Table WRITES contains the ouput of the program. Allows you to run a program without having the source code in the target system.
RH_GET_ACTIVE_WF_PLVAR Return the active HR Plan
RH_GET_DATE_DAYNAME return the day based on the date provied
RH_START_EXCEL_WITH_DATA starts Excel with the contents of an internal table. This function finds Excel in the desktop registry. It also uses a local PC working directory to save the file (that's what the 'W' value for data path flag does). Very transparent to user!
RH_STRUC_GET Returns all related org info
RHP0_POPUP_F4_SEARK
is a matchcode for any type of HR Planning object, including the possibility to fill the field that you want
Example:
Examples: search for any organizational structure
F4 = 'X'
PLVAR = '01'
OTYPE = 'O '
search for any persons
F4 = 'X'
PLVAR = '01'
OTYPE = 'P '
MULTI_SELECT = 'X' to allow multiple selection
EASY = 'X' for user-dependent matchcode
Unfortunately, the use of table BASE_OBJIDS is disabled, so you can't specify
a root for the hierarchy you display
RKD_WORD_WRAP Convert a long string or phrase into several lines.
RP_CALC_DATE_IN_INTERVAL Add/subtract years/months/days from a date
RP_LAST_DAY_OF_MONTHS Determine last day of month
RPY_DYNPRO_READ Read dynpro, including screen flow
RPY_TRANSACTION_READ Given a transaction, return the program and screen or given a program and screen, return the transactions that use the program and screen.
RS_COVERPAGE_SELECTIONS Returns an internal table that contains a formatted list of all the selection parameters entered for a report. Table is ready to print out.
RS_REFRESH_FROM_SELECTOPTIONS Get the current contents of selection screen
RS_SEND_MAIL_FOR_SPOOLLIST Send message from ABAP/4 program to SAPoffice.
RS_VARIANT_CONTENTS Returns the contents of the specified variant in a table.
RSPO_DOWNLOAD_SPOOLJOB Download the spool from a program to a file. Requires spool number.
RSPO_RETURN_ABAP_SPOOLJOB Fetch printer spool according to the spool number informed.
RZL_READ_DIR If the server name is left blank, it reads a directory from local presentation server, otherwise it reads the directory of the remote server
RZL_READ_DIR_LOCAL Read a directory on the Application Server
RZL_READ_FILE Read a file from the presentation server if no server name is given, or read file from remote server. Very useful to avoid authority checks that occur doing an OPEN DATASET. This function using a SAP C program to read the data.
RZL_SLEEP Hang the current application from 1 to 5 seconds.
RZL_SUBMIT Submit a remote report.
RZL_WRITE_FILE_LOCAL Saves table to the presentation server (not PC). Does not use OPEN DATASET, so it does not suffer from authority checks!
SAP_CONVERT_TO_XLS_FORMAT Convert data to Microsoft Excel format.
SAPGUI_PROGRESS_INDICATOR Display a progress bar on the SAP GUI, and give the user some idea of what is happening
SAVE_TEXT To load long text into SAP
SCROLLING_IN_TABLE If you are coding a module pool and using a table control, you can use this function SCROLLING_IN_TABLE to handle any scrolling. (provided by Paul Kjaer)
SD_DATETIME_DIFFERENCE Give the difference in Days and Time for 2 dates
SO_NEW_DOCUMENT_ATT_SEND_API1 Send a document as part of an email. The documentation is better than normal for this function, so please read it.
SO_SPLIT_FILE_AND_PATH Split a fully pathed filename into a filename and a path.
SO_SPOOL_READ Fetch printer spool according to the spool number informed. See also RSPO_RETURN_ABAP_SPOOLJOB
SO_WIND_SPOOL_LIST Browse printer spool numbers according to user informed.
SWD_HELP_F4_ORG_OBJECTS
HR Matchcode tailored for organizational units. Includes a button so that you can browse the hierarchy too.
SX_OBJECT_CONVERT_OTF_PDF Conversion From OTF to PDF (SAPScript conversion)
SX_OBJECT_CONVERT_OTF_PRT Conversion From OTF to Printer Format (SAPScript conversion)
SX_OBJECT_CONVERT_OTF_RAW Conversion From OTF to ASCII (SAPScript conversion)
SXPG_CALL_SYSTEM you can check the user's authorization for the specified command and run the command. The command runs on the host system on which the function module is executed. The function module is RFC capable. It can therefore be run on the host system at which a user happens to be active or on another designated host system at which an R/3 server is active.
SXPG_COMMAND_CHECK Check whether the user is authorized to execute the specified command on the target host system with the specified arguments.
SXPG_COMMAND_DEFINITION_GET Read the definition of a single external OS command from the R/3 System's database.
SXPG_COMMAND_EXECUTE Check a user's authorization to use a command, as in SXPG_COMMAND_CHECK. If the authorization check is successful, then execute the command on the target host system.
SXPG_COMMAND_LIST_GET Select a list of external OS command definitions.
TERMINAL_ID_GET Return the terminal id
TH_DELETE_USER Logoff a user. Similar results to using SM04.
TH_ENVIRONMENT Get the UNIX environment
TH_POPUP Display a popup system message on a specific users screen.
TH_REMOTE_TRANSACTION Run a transaction on a remote server. Optionally provide BDC data to be used in the transaction
TH_USER_INFO Give information about the current user (sessions, workstation logged in from, etc)
TH_USER_LIST Show which users are logged into an app server
TMP_GUI_DIRECTORY_LIST_FILES Retrieve all of the files and subdirectories on the Presentation Server (PC) for a given directory.
When a value other than * or . is used for the filter, you will not get any directories, unless they match your wildcard filter. For example, if you entered *.png, then only files and directories that end in png will be returned by the function.
Example:
data: lc_directory like bdschko16-target_dir value 'C:\TEMP\',
lc_filter(20) type c default '.'.
li_file_count type i,
li_dir_count type i,
ltab_dir_table like sdokpath occurs 0 with header line,
ltab_file_file_table like sdokpath occurs 0 with header line.
call function 'TMP_GUI_DIRECTORY_LIST_FILES'
exporting
directory = lc_directory
filter = lc_filter importing
file_count = li_file_count
dir_count = li_dir_count
tables
file_table = ltab_file_table
dir_table = ltab_dir_table
exceptions
cntl_error = 1
others = 2.
UNIT_CONVERSION_SIMPLE convert weights from one UOM to another.
UPLOAD upload a file to the presentation server (PC)
UPLOAD_FILES Will load one or more files from app or presentation server
WEEK_GET_FIRST_DAY For a given week (YYYYMM format), this function returns the date of the Monday of that week.
WRITE_LIST Useful for writing out the list contents that result from the function LIST_FROM_MEMORY.
WS_DOWNLOAD Save Internal Table as File on the Presentation Server
WS_EXCEL Start EXCEL on the PC
WS_EXECUTE execute a program on a windows PC
WS_FILE_DELETE Delete File at the Frontend
WS_FILENAME_GET Call File Selector
WS_MSG Create a dialog box in which you display an one line message
WS_UPLOAD Load Files from the Presentation Server to Internal ABAP Tables
WS_VOLUME_GET Get the label from a frontend device.
WWW_LIST_TO_HTML After running a report, call this function to convert the list output to HTML.
hope it will help you.
Regards,
Sreelatha gullapalli -
Any BAPI/Function Module for adding new record with dates in PA0027
Hi all,
I am tryig to find is there any BAPI/Function module for updating new record with Start Date and End date for specified Personal Number in PA0027 Table.
In PA0027 table i will be passing start date and end date for selected personal number, it needs to add new record with this details in the table checking the condition that this start date and end dates should not be between any of of start date and end dates for the specified personal number.
thanks for ur time.
MuraliHi Raj/Suresh thanks for ur answers.
but i am having a problem,i gave this values.
INFTY -
0027
NUMBER -
00000010
SUBTYPE -
010
OBJECTID
LOCKINDICATOR
VALIDITYEND -
03/12/2006
VALIDITYBEGIN -
03/01/2006
RECORDNUMBER -
000
RECORD -
P0027
OPERATION -
CHK
TCLAS -
A
DIALOG_MODE -
0
NOCOMMIT -
Y
VIEW_IDENTIFIER
SECONDARY_RECORD
i am getting short dump saying that
The source field is too short.
The current program, "SAPLHRMM", tried to assign a field to a field symbo
However, the field is shorter than the type of the field symbol, which
is not allowed.
The statement in question is in the form ASSIGN f TO <fs> CASTING or
ASSIGN f TO <fs> with a field symbol that was created using the
STRUCTURE addition.
I tried operation - Chage,Create (same thing for all inputs)
is this correct funtion moduel for my requirment?
what ever i am passing the start and end dates this should check in the table records with this personal number and if this start date and end dates are not between of any start and end dates then it should add new record with this dates.
Thanks for ur time.
Murali. -
Function module for Opening Balance day wise
Hi,
I am preparing vendor ledger report for day wise .
For example : i/p fields are : Lifnr , Budat,Bukrs
O/p fields are : Opening balance ( Before the date of lifnr Closing balance ).
Debit
Credit
Closing Balance ( Opening balance + D/C).
For this Opening balance i require the function module .
Please help me .
Regards
Nandan.Hi,
My requirement is Vendor balance Report according to Posting date wise.
o/p fields are
blart budat augdt belnr openingbalance ClosingBalance Credit Debit
Credit is when schkz is 'H'.
Debit is when schkz is 'S'.
Closing Balance = Opening Balance + Credit / Debit
Regards
Nandan. -
Function Module for calculation of the net price of a configurable material
Hi,
I would like to know if a function module allows to calculate the purchasing /net price of a configurable material at a vendor and at a requested delivery date before the creation of a purchasing order.
For configurable materials, we have no PIR and no moving / standard price thus the valuation price in the PR is blank.
I would like to fill in the field "valuation price" in the PR with the net price we can find in the PO.
However the PR is created before the PO.
Thanks a lot in advance for yours reply.
regards,hi Pravenn,
I don't know about these functions, but u can try anything like this:
data:
strdate like sy-datum value '20070901',
enddate like sy-datum value '20070909',
date(10),
moddate(1).
date = enddate - strdate + 1.
moddate = date mod 7.
date = date div 7.
if moddate <> 0.
date = date + 1.
endif.
write: / date.
Regards
Allan Cristian
Message was edited by:
Allan Cristian -
Function module for calculation of Income Tax
Hi Friends,
Please guide me any function module which calculates income tax.
I have total income with me.
I want to know the :--
-->tax on total income,
-->education cess 3%,
--> Tax payable, less: relief under sec 89,
--> Final tax payable
Thanks & Regards,
ShivaniHi,
Refer below link
http://help.sap.com/saphelp_470/helpdata/en/0d/bec6ba2cec4cf69e9ba5b43dbec440/content.htm
thanks,
venkat -
Function Module for Excise and VAT Calculation
Dear All,
I required one Function module for calculation of Excise % and amount of Invoice Verification Document.
We are use TAXINN tax procedure. I am try to make Purchases Register where we required the Break up of Full tax amount as basic excise duty, Education Cess, S&H Education Cess and VAT Amount.
Thanks
MukeshHi,
Locks are usually appliend on Tables. So you could find the table names affecting.
Then you could goto SE11 and n Lock objects search for table name
Once you identify the lock object. Display. Goto->Lock Modules.
You will get 2 module names one for enqueue and 1 for dequeue.
e.g. Lock object EBKK_ACCNT.
and FMs are DEQUEUE_EBKK_ACCNT and ENQUEUE_EBKK_ACCNT
Hope this helps.
Regards
Megha -
Function modules for the following
Hi,
I want to know the function modules for the following purposes.
1) Check whether a date is valid or not
2) Calculate the no of days between two dates.
Expecting an early response.
Thanks n Regards,
AmitHi,
PARAMETERS: p_list LIKE t009b-bumon AS LISTBOX
VISIBLE LENGTH 11 OBLIGATORY ,
p_list1 LIKE t009b-bdatj OBLIGATORY.
SELECTION-SCREEN POSITION POS_HIGH.
PARAMETERS: p_list2 LIKE t009b-bumon AS LISTBOX
VISIBLE LENGTH 11 OBLIGATORY,
p_list3 LIKE t009b-bdatj OBLIGATORY.
Calling Function Module for calculating no of days between the
selected period
CALL FUNCTION 'NUMBER_OF_DAYS_PER_MONTH_GET'
EXPORTING
par_month = p_list
par_year = p_list1
IMPORTING
par_days = ws_n_days.
CALL FUNCTION 'NUMBER_OF_DAYS_PER_MONTH_GET'
EXPORTING
par_month = p_list2
par_year = p_list3
IMPORTING
par_days = ws_n_days1.
For Concatenating the month and year into the date format
CONCATENATE p_list1 p_list ws_i INTO ws_c_date1.
CONCATENATE p_list3 p_list2 ws_n_days1 INTO ws_c_date2.
date = ws_c_date1 - ws_c_date2.
In the above sample code the selection screen has month and year as input.
Also check this link
http://www.sapdevelopment.co.uk/tips/date/datehome.htm
Check FM
<b>RP_CALC_DATE_IN_INTERVAL</b> Add/subtract years/months/days from a date
<b>SD_DATETIME_DIFFERENCE</b> Give the difference in Days and Time for 2 dates
<b>Also for checking valid date:</b>
U can specify the date field as
Select-options: s_date like likp-date(similar to ur requirement)
This itself ceck for the valid date no seperate validation needed.
Thanks & Regards,
Judith. -
Function module for sundays in a month
hai all,
i need a function module for calculating noof sundays in a monthHi Satya,
Please check this code which is checked for syntax also. Just copy and paste the same in abap editor and check the output.
Calculation of number of sundays ****
DAta : month1(2) type c,
week1 type i,
date1 type sy-datum,
val1 type sy-datum,
day1 type SCAL-INDICATOR,
no_sundays type i.
week1 = 5.
date1 = '20060502'.
*- Function Module to fetch the Last day of the Month
CALL FUNCTION 'LAST_DAY_OF_MONTHS'
EXPORTING
DAY_IN = date1
IMPORTING
LAST_DAY_OF_MONTH = VAL1.
*- Function Module to get the day of the week
CALL FUNCTION 'DATE_COMPUTE_DAY'
EXPORTING
DATE = VAL1
IMPORTING
DAY = DAY1.
*- Calculation of number of sundays
month1 = val1+6(2).
write : / month1.
if month1 = 31.
if DAY1 <= 2 or DAY1 = 7.
no_sundays = week1.
else.
no_sundays = week1 - 1.
endif.
elseif month1 = 30.
if DAY1 = 1 or DAY1 = 7.
no_sundays = week1.
else.
no_sundays = week1 - 1.
endif.
elseif month1 = 29.
if DAY1 = 7.
no_sundays = week1.
else.
no_sundays = week1 - 1.
endif.
elseif month1 = 28.
no_sundays = 4.
endif.
write : / no_sundays.
If found helpful, please do reward. -
Function Modules to get First day of week, month, Year
Can anyone name the Function Modules for getting First day of week, month ,year.
to get first day of week use this function; WEEK_GET_FIRST_DAY
CALL FUNCTION 'WEEK_GET_FIRST_DAY'
EXPORTING
WEEK = '201107'
IMPORTING
DATE = l_date
EXCEPTIONS
WEEK_INVALID = 1
OTHERS = 2.
with DATE_COMPUTE_DAY function you can get date number in week.
CALL FUNCTION 'DATE_COMPUTE_DAY'
EXPORTING
DATE = workdate
IMPORTING
DAY = day_of_week_num
EXCEPTIONS
OTHERS = 8.
CASE day_of_week_num.
WHEN 1.
hold_day_of_week = 'Monday'.
WHEN 2.
hold_day_of_week = 'Tuesday'.
WHEN 3.
hold_day_of_week = 'Wednesday'.
WHEN 4.
hold_day_of_week = 'Thursday'.
WHEN 5.
hold_day_of_week = 'Friday'.
WHEN 6.
hold_day_of_week = 'Saturday'.
WHEN 7.
hold_day_of_week = 'Sunday'.
WHEN OTHERS.
hold_day_of_week = 'invalid'.
ENDCASE. -
Need a Function Module for fetching the prior date-Urgent!!
Hi All,
I need a function module which will give the prior date with respect to the no: of days days that are entered as input.
Can anyone please help me to fing one function module which acts as the above.
Required very urgently!!!
Thanks and Regards,
NeethuHi Neethu,
Please run the report 'ZRECTIFY_FM_DOCUMENTS' in your system.
Before running the report, create the following selection texts for the parameters/select-options as given below:
P_BUKRS: Company code
S_GJAHR: Fiscal year
S_BELNR: FI document no.
P_TEST: Test run
For More information please refer <b>SAP Note: 309619</b>
Best Regards,
Johnny.
Maybe you are looking for
-
Why can't I make some photos in iOS 8 a favorite?
I recently migrated from an iPhone 5s to a 6, and thus to iOS 8. I really miss my iPhone camera roll, which contained an odd collection of pics important to me. Although I can find them scattered through Photos in iOS 8, some of them do not have the
-
Hi. I'm having a problem inserting a column on my page. Basically, I have my resume which is all in a single column, but towards the end, I want to include a section of "computer skills" that is in 2-column format (so it doesn't run very long down th
-
Hello, this is probably a stupid question, but I was wondering how to type the '{' and '}' signs on my macbook. I still haven't figured that one out . Thanks in advance
-
Backing up a USB drive connected to TC
Hi, I have a small home network which consists of a usb drive connected to my time capsule. Is there anyway i can back the usb drive thats connected to the TC up via Time Machine....so the USB drive thats connected to the TC is back up to the TC via
-
Does the GPS feature on the new G3 iPhone an extra monthly expense?
I have just pre-ordered the new G3 iPhone. The sales person at the AT&T store told me that when the phone comes in, we can set up my account to include texting and GPS features. I thought one feature of the G3 phone was the GPS and am surprised that