Function Module for Customer Block
Hi Friends,
Is there any function module to block customer same as VD05?
Hi,
Try the below Function Modules
SD_CUSTOMER_CHECK
SD_CUSTOMER_CHECK_1
SD_CUSTOMER_CHECK_B
SD_CUSTOMER_MAINTAIN_ALL
SD_CUSTOMER_MAINTAIN_KNKA_K
Regards,
Anki Reddy
Similar Messages
-
Inbound function module for custom IDOC
HI,
I have created custom IDOC.I need to create inbound function module for that custom IDOC.Can any one send me sample
function module for custom IDOC.(what are all the import Export,tables parameters and exceptions that I need to create for function module)
Thanks&Regards
Rama.MekalaHI Rama,
I presumed that You are talking about a FM to create inbound IDOC. So for creating inbound IDOC you can use '
CALL FUNCTION 'IDOC_INBOUND_ASYNCHRONOUS'
TABLES
idoc_control_rec_40 = gt_edidc
idoc_data_rec_40 = gt_edidd.
IF sy-subrc NE 0.
* MESSAGE e000 WITH text-003.
* ELSE.
* MESSAGE i000 WITH text-004 .
ENDIF.
just prepare edidc and edidd record in and pass it to the FM..
Hope this will work for you...
Thanks -
Function module for customer debit note/credit note
Hi
Can you please tell us the function module for the following:
1. Customer debit note
2. Customer credit note
Also, we would like to have function module for extracting GL balances at business area/profit center level.
Regards
S.RadhakrishnanHi
We are looking for function module for posting FI Invoice/credit memo using FB70/FB75.
Also, we need function module for extracting GL balances at business area/profit center level.
Regards
S.Radhakrishnan -
Function module for custom report for cost center group
Hello all,
I wonder, if there is any SAP function module for following query:
We have got a custom program, which evaluates cost centers. We would like to evaluate a cost center group, like it is available within the report painter - the output screen is splitted into two parts, on the left part there is the cost centre group hierarchy and on the right side, there are the values for the node, which is selected within the hierarchy.
Is there any standard function module od do we have to program it ourself?
Thanks in advanceHi Peter,
You have a BAPI which gives you the details of cost centre group, if this is what you are looking for:
BAPI_COSTCENTERGROUP_GETLIST
Regards,
Eli -
Function Module for HU Block and Unblock
Hi,
Can you please tell me the function module name to Block and Unblock the Handling Unit
which is exists iin a particular warehouse?
I searched in SDN already with no luck.
Thanks in advance...
Sridhar ....Hi,
Try the below Function Modules
SD_CUSTOMER_CHECK
SD_CUSTOMER_CHECK_1
SD_CUSTOMER_CHECK_B
SD_CUSTOMER_MAINTAIN_ALL
SD_CUSTOMER_MAINTAIN_KNKA_K
Regards,
Anki Reddy -
Function Module For Customer Receivable Invoice Document Wise
Dear All,
Is there a standard Function Module / BAPI available for calculating Customer Receivable amount invoice document wise? I will explain the scenario in greater detail:
1) Invoice is booked against customer (FB70 / SD Interface)
2) Receipt is made (F-28 )
3) Matching of invoice is done at the time of receipt (either partial or residual)
4) Customer Account Clearing is done (F-32)
We have explored tables BSID,BSAD,BSEG and BSE_CLR, but are unable to decipher the exact logic by which the System is storing the cleared amount, invoice document wise. We have tried referring to BSEG-REBZG (Invoice Reference) and BSE_CLR for finding out the clearing document and thus arriving at the invoice document balance, but the table entries are not similar in case of partial and residual payment and hence it is creating problem in deducing the actual invoice wise open balance. Can anyone refer to some FM / API / Logic for deducing the same?
Your inputs will be sincerely appreciated.
Thanks and Sincere Regards,
AmitabhaHi People,
Any ideas?
Thanks and Sincere regards,
Amitabha -
ABAP function module for Customer Specific Status
I am looking for a standard ABAP function module that will return the customer specific status for a person.
Please let me know if any exists.
Thanks,
HariniCustomer specific status for a person .
Could you pleasee give more details...for what purpose you are trying to get the status of a person. so that it will be easy for everyone to search -
How to Assign a function module for customized IDOC
Hi,
I have created a customized IDOC. Can any body explain how to assign a FM for customized IDOC? Is same IDOC can be used for both Outbound and Inbound Process? In WE41 and WE42 we have to give the outbound and inbound function module name. can we give same function module? Is process code is same for both outbound and inbound process?
Valuable suggetions are appreciated.
Regards,
RamHi ,
Here is the Procedure for the Inbound Idoc Funtion Module
Function Module : SE37
Message : WE81
Assign message : WE82
Assgin FM : we57
Process Code : WE42.
Assign Partner Profile - WE20,
To test the Inbound IDOC.
In WE19, Give the IDOC number & execute ... then put the cursor on the idoc control record . then click on the Standard Inbound push button on the application tool bar.it will show show all the details like partner no,type , message type , process code & function module name ...
now put a break point in the function module .. & debug .
if u r using customised inbound function module , then click on inbound function module .. there u will get a pop screen with FM name & debugging option in both background & foreground mode...
Reward Points if it is Useful.
Thanks,
Manjunath MS -
Function module for customer open item aging report
Hi all,
Please let me know the FM for customer open item aging or which FM is used in tcode S_ALR_87012178 to get the age wise open item of customer.
Thanks in advance
Regards
Puneet<b><u>Part4</u></b><br />
<br />
<pre class="jive-pre"><code class="jive-code jive-java"><font color="red">"&----</font>
<font color="red">"*& Form process_data</font>
<font color="red">"&----</font>
FORM PROCESS_DATA .
DATA : L_TOTAL_TMP(15). <font color="red">" LIKE BSID-DMBTR. </font>
CLEAR : L_TOTAL,LPD_TOTALS.
<font color="red">"* As per Customer accumulate the amount.</font>
<font color="red">"* For overdue items.</font>
CLEAR : L_TOTAL_TMP.
LOOP AT L_OPENDUE_LT.
CONDENSE L_OPENDUE_LT-DMBTR NO-GAPS.
L_TOTAL_TMP = L_TOTAL_TMP + L_OPENDUE_LT-DMBTR.
AT END OF KUNNR.
LPD_TOTALS-KUNNR = L_OPENDUE_LT-KUNNR.
LPD_TOTALS-LPD_TOTAL = L_TOTAL_TMP.
APPEND LPD_TOTALS.
CLEAR : L_TOTAL_TMP.
ENDAT.
ENDLOOP.
CLEAR : L_TOTAL,LOA_TOTALS.
<font color="red">"* As per Customer accumulate the amount.</font>
<font color="red">"* For Open Items.</font>
CLEAR : L_TOTAL_TMP.
LOOP AT L_OPENDUE_LE.
CONDENSE L_OPENDUE_LE-DMBTR NO-GAPS.
L_TOTAL_TMP = L_TOTAL_TMP + L_OPENDUE_LE-DMBTR.
AT END OF KUNNR.
LOA_TOTALS-KUNNR = L_OPENDUE_LE-KUNNR.
LOA_TOTALS-LOA_TOTAL = L_TOTAL_TMP.
APPEND LOA_TOTALS.
CLEAR : L_TOTAL_TMP.
ENDAT.
ENDLOOP.
<font color="red">"* Get ageing data based slabs, and duedate.</font>
PERFORM AGEING_DATA.
LOOP AT L_BSID.
<font color="red">"* Move the data to final internal table.</font>
MOVE L_BSID-KUNNR TO FINAL_DATA-KUNNR.
MOVE L_LANDX TO FINAL_DATA-LANDX.
MOVE L_PSTLZ TO FINAL_DATA-PSTLZ.
MOVE L_NAME TO FINAL_DATA-NAME1.
MOVE L_PHONE TO FINAL_DATA-PHONE.
MOVE L_SORTL TO FINAL_DATA-SORTL.
MOVE L_BSID-ZTERM TO FINAL_DATA-ZTERM.
MOVE L_BUSAB TO FINAL_DATA-BUSAB.
READ TABLE LPD_TOTALS WITH KEY KUNNR = L_BSID-KUNNR.
IF SY-SUBRC EQ 0.
MOVE LPD_TOTALS-LPD_TOTAL TO FINAL_DATA-LPD_TOTAL.
ENDIF.
READ TABLE LOA_TOTALS WITH KEY KUNNR = L_BSID-KUNNR.
IF SY-SUBRC EQ 0.
MOVE LOA_TOTALS-LOA_TOTAL TO FINAL_DATA-LOA_TOTAL.
ENDIF.
READ TABLE AGE_DATA WITH KEY KUNNR = L_BSID-KUNNR.
IF SY-SUBRC EQ 0.
MOVE AGE_DATA-CURAMT TO FINAL_DATA-CURAMT.
MOVE AGE_DATA-AMT1 TO FINAL_DATA-AMT1.
MOVE AGE_DATA-AMT2 TO FINAL_DATA-AMT2.
MOVE AGE_DATA-AMT3 TO FINAL_DATA-AMT3.
MOVE AGE_DATA-AMT4 TO FINAL_DATA-AMT4.
MOVE AGE_DATA-AMT5 TO FINAL_DATA-AMT5.
MOVE AGE_DATA-AMT6 TO FINAL_DATA-AMT6.
ENDIF.
ENDIF.
APPEND FINAL_DATA.
CLEAR: FINAL_DATA.
ENDLOOP.
ENDFORM. <font color="red">" process_data</font>
</code></pre> -
Custom Function Module for the New Process Codes
I want to distribute the custom table data . For that i have written the program using MASTER_IDOC_DISTRIBUTE. I have created the custom message & idoc types along with their assignments.
I got struck up at the process code. I have to assign the function module for that process code. Can anyone kindly help me in writting the code at that function module ?Hi Friends,
My requirement is , i need to transfer the table records. For that i have created the Message/Idoc Types and also created the Partner profile and the Distribution model view .....all alll i have done.
My doubt is , in the we20, at the outbound parameters , i can give the Message/Idoc types that i have created. Ok thats fine
But at the inbound parameters, i have to give the inbound process code. So i have created the Inbound process code. As we know that for every process code a function module is attached, now i have to create the function module which posts the records in receiver side.
so 1. Does the Function module need to be RFC Enabled ?
2. Do we need to create Object type in SWO1 once i
create and release the function module ? -
Sample Outbound Function Module for IDocs
Hello All,
Does anyone have sample code for an outbound function module for an IDoc - they created themselves. Custom or extended? Weblogs, sample code will be useful
ty, dd
Message was edited by:
Demi DouglasHi,
Check this program:
REPORT zmatmas_idoc.
INCLUDE zmatmas_idoc_top.
INCLUDE zmatmas_idoc_selscreen.
INCLUDE zmatmas_idoc_formroutine.
START OF SELECTION
START-OF-SELECTION.
PERFORM get_data.
PERFORM create_idoc.
PERFORM distribute_idoc.
TABLES
TABLES: mara.
Structures
*Header
TYPES: BEGIN OF gs_h_mara,
matnr TYPE mara-matnr,
ersda TYPE mara-ersda,
ernam TYPE mara-ernam,
laeda TYPE mara-laeda,
aenam TYPE mara-aenam,
pstat TYPE mara-pstat,
END OF gs_h_mara.
*Item
TYPES: BEGIN OF gs_i_makt,
spras TYPE makt-spras,
maktx TYPE makt-maktx,
maktg TYPE makt-maktg,
matnr TYPE makt-matnr,
END OF gs_i_makt.
TYPES: BEGIN OF gs_i_mbew,
lvorm TYPE mbew-lvorm,
lbkum TYPE mbew-lbkum,
salk3 TYPE mbew-salk3,
vprsv TYPE mbew-vprsv,
verpr TYPE mbew-verpr,
stprs TYPE mbew-stprs,
peinh TYPE mbew-peinh,
matnr TYPE mbew-matnr,
END OF gs_i_mbew.
TYPES: BEGIN OF gs_i_mvke,
vkorg TYPE mvke-vkorg,
vtweg TYPE mvke-vtweg,
lvorm TYPE mvke-lvorm,
versg TYPE mvke-versg,
bonus TYPE mvke-bonus,
provg TYPE mvke-provg,
matnr TYPE mvke-matnr,
END OF gs_i_mvke.
TYPES: BEGIN OF gs_i_mlan,
aland TYPE mlan-aland,
taxm1 TYPE mlan-taxm1,
taxm2 TYPE mlan-taxm2,
taxm3 TYPE mlan-taxm3,
taxm4 TYPE mlan-taxm4,
matnr TYPE mlan-matnr,
END OF gs_i_mlan.
*Segment & control record
DATA: gs_segment_h LIKE zmara_h,
gs_segment_i1 LIKE zmakt_i,
gs_segment_i2 LIKE zmbew_i,
gs_segment_i3 LIKE zmvke_i,
gs_segment_i4 LIKE zmlan_i,
gs_control_rec LIKE edidc.
Internal Table and work area
*Header & Item
DATA: gt_h_mara TYPE STANDARD TABLE OF gs_h_mara,
gt_i_makt TYPE STANDARD TABLE OF gs_i_makt,
gt_i_mbew TYPE STANDARD TABLE OF gs_i_mbew,
gt_i_mvke TYPE STANDARD TABLE OF gs_i_mvke,
gt_i_mlan TYPE STANDARD TABLE OF gs_i_mlan.
DATA: gw_h_mara TYPE gs_h_mara,
gw_i_makt TYPE gs_i_makt,
gw_i_mbew TYPE gs_i_mbew,
gw_i_mvke TYPE gs_i_mvke,
gw_i_mlan TYPE gs_i_mlan.
*EDIDD & EDIDC
DATA: gt_edidc LIKE TABLE OF edidc WITH HEADER LINE,
gt_edidd LIKE TABLE OF edidd WITH HEADER LINE.
SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
SELECT-OPTIONS: s_matnr FOR mara-matnr OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b1.
*& Include ZMATMAS_IDOC_FORMROUTINE
*& Form get_data
FORM get_data .
SELECT matnr ersda ernam laeda aenam pstat
FROM mara
INTO TABLE gt_h_mara
WHERE matnr IN s_matnr.
IF sy-subrc <> 0.
MESSAGE e003(zkaren_msgclass).
No data found according to the selection criteria
ENDIF.
IF gt_h_mara IS NOT INITIAL.
SELECT spras maktx maktg matnr
INTO TABLE gt_i_makt
FROM makt
FOR ALL ENTRIES IN gt_h_mara WHERE matnr = gt_h_mara-matnr.
SELECT lvorm lbkum salk3 vprsv verpr stprs peinh matnr
INTO TABLE gt_i_mbew
FROM mbew
FOR ALL ENTRIES IN gt_h_mara WHERE matnr = gt_h_mara-matnr.
SELECT vkorg vtweg lvorm versg bonus provg matnr
INTO TABLE gt_i_mvke
FROM mvke
FOR ALL ENTRIES IN gt_h_mara WHERE matnr = gt_h_mara-matnr.
SELECT aland taxm1 taxm2 taxm3 taxm4 matnr
INTO TABLE gt_i_mlan
FROM mlan
FOR ALL ENTRIES IN gt_h_mara WHERE matnr = gt_h_mara-matnr.
ENDIF.
ENDFORM. " get_data
*& Form create_idoc
FORM create_idoc .
*Control data
gs_control_rec-mestyp = 'ZKAR_MATMAS_MSG_TYPE'. "Message type
gs_control_rec-idoctp = 'ZKAR_MATMAS'. "IDoc
gs_control_rec-rcvprt = 'LS'. "Partner type of receiver
gs_control_rec-rcvprn = 'T90CLNT810'. "Partner number of receiver
LOOP AT gt_h_mara INTO gw_h_mara .
*Header data.
gs_segment_h-matnr = gw_h_mara-matnr.
gs_segment_h-ersda = gw_h_mara-ersda.
gs_segment_h-ernam = gw_h_mara-ernam.
gs_segment_h-laeda = gw_h_mara-laeda.
gs_segment_h-aenam = gw_h_mara-aenam.
gs_segment_h-pstat = gw_h_mara-pstat.
*Header segment
gt_edidd-segnam = 'ZMARA_H'.
gt_edidd-sdata = gs_segment_h.
MOVE gt_edidd-sdata TO gs_segment_h.
APPEND gt_edidd.
WRITE:/ gs_segment_h-matnr, gs_segment_h-ersda, gs_segment_h-ernam,
gs_segment_h-laeda, gs_segment_h-aenam, gs_segment_h-pstat.
*ITEM 1
LOOP AT gt_i_makt INTO gw_i_makt.
IF gw_i_makt-matnr = gw_h_mara-matnr.
*Item data
gs_segment_i1-spras = gw_i_makt-spras.
gs_segment_i1-maktx = gw_i_makt-maktx.
gs_segment_i1-maktg = gw_i_makt-maktg.
*Item segment
gt_edidd-segnam = 'ZMAKT_I'.
gt_edidd-sdata = gs_segment_i1.
APPEND gt_edidd.
ENDIF.
ENDLOOP. "at gt_i_vbak
*ITEM2
LOOP AT gt_i_mbew INTO gw_i_mbew.
IF gw_i_mbew-matnr = gw_h_mara-matnr.
*Item data
gs_segment_i2-lvorm = gw_i_mbew-lvorm.
gs_segment_i2-lbkum = gw_i_mbew-lbkum.
gs_segment_i2-salk3 = gw_i_mbew-salk3.
gs_segment_i2-vprsv = gw_i_mbew-vprsv.
gs_segment_i2-verpr = gw_i_mbew-verpr.
gs_segment_i2-stprs = gw_i_mbew-stprs.
gs_segment_i2-peinh = gw_i_mbew-peinh.
*Item segment
gt_edidd-segnam = 'ZMBEW_I'.
gt_edidd-sdata = gs_segment_i2.
APPEND gt_edidd.
ENDIF.
ENDLOOP.
*ITEM3
LOOP AT gt_i_mvke INTO gw_i_mvke.
IF gw_i_mvke-matnr = gw_h_mara-matnr.
*Item data
gs_segment_i3-vkorg = gw_i_mvke-vkorg.
gs_segment_i3-vtweg = gw_i_mvke-vtweg.
gs_segment_i3-lvorm = gw_i_mvke-lvorm.
gs_segment_i3-versg = gw_i_mvke-versg.
gs_segment_i3-bonus = gw_i_mvke-bonus.
gs_segment_i3-provg = gw_i_mvke-provg.
*Item segment
gt_edidd-segnam = 'ZMVKE_I'.
gt_edidd-sdata = gs_segment_i3.
APPEND gt_edidd.
ENDIF.
ENDLOOP.
*ITEM4
LOOP AT gt_i_mlan INTO gw_i_mlan.
IF gw_i_mlan-matnr = gw_h_mara-matnr.
*Item data
gs_segment_i4-aland = gw_i_mlan-aland.
gs_segment_i4-taxm1 = gw_i_mlan-taxm1.
gs_segment_i4-taxm2 = gw_i_mlan-taxm2.
gs_segment_i4-taxm3 = gw_i_mlan-taxm3.
gs_segment_i4-taxm4 = gw_i_mlan-taxm4.
*Item segment
gt_edidd-segnam = 'ZMLAN_I'.
gt_edidd-sdata = gs_segment_i4.
APPEND gt_edidd.
ENDIF.
ENDLOOP.
ENDLOOP. "at gt_h_kna1
ENDFORM. " create_idoc
*& Form distribute_idoc
FORM distribute_idoc .
CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE'
EXPORTING
master_idoc_control = gs_control_rec
TABLES
communication_idoc_control = gt_edidc
master_idoc_data = gt_edidd
EXCEPTIONS
error_in_idoc_control = 1
error_writing_idoc_status = 2
error_in_idoc_data = 3
sending_logical_system_unknown = 4
OTHERS = 5.
IF sy-subrc <> 0.
WRITE:/ 'Error'.
ELSE.
LOOP AT gt_edidc.
WRITE:/ gt_edidc-docnum.
ENDLOOP. "at gt_edidc
ENDIF.
ENDFORM. " distribute_idoc -
How to create the INBOUND Function Module for INBOUND IDOCs
Hi Friends,
Can any Suggest me How to proceed to Create an INBOUND Function Module for Processing the INBOUND IDOCS
which are recieved from XI Server ?
I am working in SAP-ISU
Here i will recieve the INBOUND IDOCs for the Meter Reading Orders.
We have a Standard INBOUND FUNCTION MODULE
IDOC_INPUT_ISU_MR_UPLOAD
which Uploads the Meter Reading Results.
I copied the Same function Module into ZIDOC_INPUT_
and working on it.
Can any one suggest me, whether i am going in correct way or not.
In IDOC_INPUT_ISU_MR_UPLOAD Inbound fun module,
BAPI_MTRREADDOC_UPLOAD is used to Update or Insert the Meter Reading Results,
My requirment is to Insert and Update the Meter Reading Orders which are Inbounded from XI.
Can I Use the Same BAPI
BAPI_MTRREADDOC_UPLOAD
to Update the below fields,
EABL-SERNR
EABL-ZWNUMMER
EABLG-ABLESGR
EABL-V_ZWSTAND
EABL-N_ZWSTAND
EABL-ABLHINW
EABL-ZSKIPC
EABL-ADAT
EABL-ATIMTATS
EABL-ADATTATS
EABL-ATIM
EABL-ZMESSAGE
EABL-ABLESER(Meter reader number)
Kindly Suggest me,
Thanks in Advance,
GaneshHello Ganesh
I think you are going completely astray with you z-function module for IDoc processing.
If you look at TABLES parameter METERREADINGRESULTS (type BAPIEABLU ) of BAPI_MTRREADDOC_UPLOAD you will find many of the requested fields already:
EABL-SERNR => BAPIEABLU-SERIALNO
EABL-ZWNUMMER =>REGISTER
EABLG-ABLESGR
EABL-V_ZWSTAND
EABL-N_ZWSTAND
EABL-ABLHINW
EABL-ZSKIPC
EABL-ADAT
EABL-ATIMTATS => ACTUALMRTIME
EABL-ADATTATS => ACTUALMRDATE
EABL-ATIM
EABL-ZMESSAGE
EABL-ABLESER(Meter reader number)
Field EABL-ZMESSAGE appears to be custom field (at least I cannot find it on ECC 6.0). If this field was added using include CI_EABL then you probably can get these values into the BAPI using the EXTENSIONIN parameter.
Check routine CHECK_UPLOADRECORDS in the BAPI which allows two extension structures:
- BAPI_TE_EABL
- BAPI_TE_EOSB
Not surprisingly BAPI_TE_EABL contains the include CI_EABL.
Regards
Uwe -
How to config Check Digits function module for Student Number Validation
Hi SLCM Experts,
In the SAP-SLCM, How to use check digits function module for validate student number. Just only config it or need to customizing program.
*Any idea to student number validation in SLCM?*
Best Regards,
Suvatchai K.Hi ,
Can you expalin it further ?
You configure the St. no in piq_matr . And set it as external or internal no. range which suits your business .
What is the validation you are looking for ?
Regards
Gajalakshmi -
Function Modules for Data and Time
Hi all,
I need 2 function modules for date and time. when we pass current data(sy-datum) and current time (sy-uzeit) into function modules, shoud get date in <b>dd/mm/yyyy or dd.mm.yyyy</b> and time in<b> HH:MM:SS</b> formats.
Thanks in advanceHi Ranjith,
i think this will b usefull for you..
SAP Bar Chart Function Modules and what they are used for
Function module
Used for
BARC_GRAPHIC_PBO
Starting bar chart at PBO time, using a graphic profile (parameter PROFILE)
BARC_GRAPHIC_PAI
Analyzing data returned by the graphic
BARC_SET_TIME_AXIS
Setting start and end of time axis
BARC_SET_OPTIONS
Setting options
BARC_ADD_CHART
Creating a chart
BARC_SET_CHART_ATTRIB
Setting chart attributes
BARC_ADD_SECTION
Creating a section on the time axis
BARC_SET_SECTION_ATTRIB
Setting section attributes
BARC_ADD_RIBBON
Adding a ribbon to the time axis
BARC_SET_RIBBON_ATTRIB
Setting attributes for ribbons in the chart
BARC_ADD_GRID
Adding a time grid
BARC_SET_GRID_ATTRIB
Setting grid attributes
BARC_ADD_LAYER
Adding a layer (graphic elements)
BARC_SET_LAYER_ATTRIB
Setting layer attributes
BARC_ADD_LINE
Adding a line
BARC_ADD_CALENDAR
Creating a calendar
BARC_SET_CALENDAR_ATTRIB
Setting attributes for a calendar
BARC_ADD_TIME_PROFILE
Creating time profiles
BARC_SET_TIME_PROFILE_ATTRIB
Setting attributes for time profile
BARC_ADD_INTERVAL
Adding a time interval
BARC_SET_INTERVAL_ATTRIB
Setting time interval attributes
BARC_ADD_TIME_OBJECT
Creating a time object
BARC_CONVERT_DATE
Creating a date string in bar chart format
BARC_REVERT_DATE
Converting a date string in bar chart format to date and time
BARC_ADD_DATELINE
Creating a date line
BARC_SET_DATELINE_ATTRIB
Setting dateline attributes
BARC_GET_PROFILE_CONTENTS
Obtaining profile contents for customizing a chart
BARC_GET_COLUMN_WIDTH
Selecting new column width
BARC_SET_COLUMN_WIDTH
Setting the column width
BARC_GET_TEXTINDEX
Obtaining the text index of a field
BARC_SET_LABELS
Positioning the chart display
BARC_SET_COLUMN_ATTRIB
Setting column attributes
BARC_SET_ROW_ATTRIB
Setting row attributes
BARC_SET_ROW_HEIGHT
Setting the line height
BARC_SET_MAXCHARTS
Setting the maximum number of charts sent
<b>If its usefull reward points
</b> -
Function Module for open Purchase Order & Sales Order?
Hi, commonly I read the data from tables and calculate the open quantity for sales order and purchase order, but I want to know, are there any standard function modules for getting the list of open "purchase order" and "sales order" respectively?
Thanks and Regards.hi Ren,
u can check all these bapi's related to salesorder
BAPI_SALESORDER_CHANGE Sales order: Change Sales Order
BAPI_SALESORDER_CONFIRMDELVRY Sales Order: Confirmation of Delivery; Document Flow Update
BAPI_SALESORDER_CREATEFROMDAT1 Sales order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDAT2 Sales order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDATA Create Sales Order, No More Maintenance
BAPI_SALESORDER_GETLIST Sales order: List of all Orders for Customer
BAPI_SALESORDER_GETSTATUS Sales Order: Display Status
BAPI_SALESORDER_SIMULATE Sales Order: Simulate Sales Order
May be this FM can help you
MB_ADD_PURCHASE_ORDER_QUANTITY (Reading and adding open purchase order quantities)
Regards,
Naveen
Maybe you are looking for
-
How to print uspto patent images using Safari and Quicktime
3/18/06 Do you want to know how to print US patent images using Safari? Read on. When you access the "images" link of a specific patent on the www.uspto.gov/ website using Safari, the page you are viewing is only one small upper left tile of a huge p
-
REPOST(JDEV TEAM) Kindly respond!!!
SUBJECT: Strange Behavior in TOMCAT although it runs OK in Jdeveloper. This is actually a repost and I am hoping that someone would answer: I am encountering some strange behavior when I deploy my application to TOMCAT. If I run in JDeveloper (webtog
-
How do I reduce the size of a PDF file for emailing?
I have scanned a document on my Canon Printer. The size is very large about 14 Megabytes. I do not know how to reduce the size so that I can send it via Mail. I have searched HELP but have not as yet found an answer. One suggestion was that in my
-
I've been told I need firmware EFI2.x on my MacBook to be able to install a 64 bit Windows 7 version via boot camp. My OSx 10.6.8 doesn't have a Firmware Updater Application in the utilities folder. Will I be able to update my firmware? Is there a
-
Keyboard stopped working in Word 2011 Mac doc
I had been typing in it, and it suddenly stopped working. It works in other windows and ops, but not in Word. I saved and closed the doc, started a new one. Removed the batteries and put them back in, reconnected the bluetooth keyboard. Still work