Function Module for getting the desired date

Hi All,
I need a function module where in get the date value from Current date - 540 days.
i,e System Date - 540 days = ????
Thanks
Suresh

previous FM works good , this is for ur info , to give in month, date and year instead of onlly days
CALL FUNCTION 'RP_CALC_DATE_IN_INTERVAL'
    EXPORTING
      date      = sy-datum
      months    = '00'
      days      = '07'
      years     = '00'
      signum    = '-'
    IMPORTING
      calc_date = w_due_date.
Message was edited by: chandrasekhar jagarlamudi
Message was edited by: chandrasekhar jagarlamudi

Similar Messages

Functional module for Getting Material classification data.

Please tell me Functional module for Getting Material classification data like class type , class, characteristics and characteristics values for material.

Dear,
FM:
CLAF_CLASSIFICATION_OF_OBJECTS
Table KLAH Class Header Data
- KSML Characteristics of a Class
Regards,
R.Brahmankar

Function Module for getting the Sales Price for a condition type

Hi,
I am looking for a standard function module to which I can pass my condition type(new customizing) and it will return the sales price. The customer is going to create some new condition type to manitain the sales price. I'll have the necessary information like material/sales org/distribution channel, customer and need the standard function module to read the condition records for that condition type(as configured) and give me the price. PLease help if you know of a standard function module performing this.
Thanks in advance.
Regards
Malthi

Hi malthi ,
welcome to sdn
for material sales area u can look for the validations is table MVKE.
the classification of the conditions is in tables like A901, a902 etc which in my opinion holds the condition types per classification .
put a A* in se11 and this will give the list of tables per classification .
u need to get the conditions as per kschl and dmbtr and
etc..
like this ..
Get Condition Values for Material/Plant combination
IF NOT i_a916[] IS INITIAL.
    SELECT knumh kappl kschl krech
           kbetr konwa kpein kmein
           INTO TABLE i_konp
           FROM konp
           FOR ALL ENTRIES IN i_a916
           WHERE knumh EQ i_a916-knumh AND
                 kappl EQ i_a916-kappl AND
                 kschl EQ i_a916-kschl AND
                 loevm_ko NE 'X'.
ENDIF.
Get Condition Values for Material/Plant/Ordertype/
Customer combination
IF NOT i_a925[] IS INITIAL.
    SELECT knumh kappl kschl krech
           kbetr konwa kpein kmein
           APPENDING TABLE i_konp
           FROM konp
           FOR ALL ENTRIES IN i_a925
           WHERE knumh EQ i_a925-knumh AND
                 kappl EQ i_a925-kappl AND
                 kschl EQ i_a925-kschl AND
                 loevm_ko NE 'X'.
ENDIF.
just check this Fm if u can apply ur condition over here ..
ME_GET_PRICE_CONDITION
regards,
VIjay.

Function Module for getting Payroll start date and end date

Hi Gurus,
If I give one date then is there any function module to find the payroll period start date and enddate for that given date?
Points will be awarded
Thanks
Ravi

Hi,
Try these FMs
HR_PAYROLL_PERIODS_GET
HR_BEN_PAY_GET_PAYROLL_PERIODS
HR_PAYROLL_PERIOD_GET
HR_P06I_GET_PAYROLL_PERIOD
Regards,
PRashant

Function module for getting the open qty

HI experts,
I have a PO quantity(EKPO_MENGE).against same PO and item item(EBELN and EBELP) if Goods receipt has happened (MSEG_ERFMG) then i need to calculate the open qty.and also by netting the open quantity if multiple GRs has done against the same PO and item.
Can you suggest any function module to get this open PO quantity.

Hello,
Hope this link can help you.
[Po Open Quantity;
Thanks
Jayant

Function module for getting the all PO waiting for release

Hi,
Is there any standard Function module for gettting all the PO's which all waiting for release.
Regards
Bala.

hi Bala,
ECC 6.0 Exits for VA01
go through the above link i think that will help u...
Regards,
sindhu.

DDIF Function Module for getting the description of a BAPI structure

Hi,
I need to find a function module that returns the description of a structure...well a BAPI structure, not that that makes any difference.
The DDIF_ function modules I've tried will all return the descriptions of data elements in tables, but not structures.
Thanks,
Tristan

Check FM : CACS_DBNAME2TABNAME

Function module for getting the text.

Hi ,
Is there any funcion module to get the message text if i pass the message no and message class as the exporting parameter.
Useful answers will be rewarded.
Regards,
neslin.

hi...
use this one
BAPI_MESSAGE_GETDETAIL
ok and following are for display
LMON_MESSAGE_DISPLAY
LTIF_MESSAGE_DISPLAY
reward..points

Function module to get the same date of the previous month

Hi
Can anybody tell me how to get the
same date of the previous month.
example if i am entering date as 30 may 2007
i want the date as 30 april 2007

CALL FUNCTION 'RP_CALC_DATE_IN_INTERVAL'
EXPORTING
date = pa_end
days = '00'
months = '01'
signum = '-'
years = '00'
IMPORTING
calc_date = pa_end.
ENDIF.
nd try below FMs as well...
CCM_GO_BACK_MONTHS
HR_PT_ADD_MONTH_TO_DATE
RP_CALC_DATE_IN_INTERVAL
Hope it will solve your problem...
Reward points if useful..
Thanks & Regards
ilesh 24x7

Function module for getting the partner details and Classifications

Hi,
Can any one tell me FMs for getting the Partner Details and for getting the characteristics associated with an equipment??
Thanks

Hi Anu,
are you talking about the SAP Business Partner???
Well, if yes, then just check the FM 'BAPI_BUPA_CENTRAL_GETDETAIL'.
Or just search for oher FMs with BAPI_BUPA*.
Hope this helps...
Ciao Bernhard

Function Module for getting the System time.

Hello All,
Which is the Function Module used in APO to get the system time?
Thanks for your response in advance.
Regards, Chirag

Hi Chirag,
Please try the following function modules
1) /SAPAPO/CRES_GET_TIMESTREAM_BT
2) /SAPAPO/OM_TIME_GET
The field name for system time is UZEIT under
structure SYST
Also try
3) CALENDAR_GET_TIMESTAMP
4) SAL_CSM_RECEIVER
I guess the third one will have your required data
Regards
R. Senthil Mareeswaran.

Need a Function Module for fetching the prior date-Urgent!!

Hi All,
     I need a function module which will give the prior date with respect to the no: of days days that are entered as input.
Can anyone please help me to fing one function module which acts as the above.
Required very urgently!!!
Thanks and Regards,
    Neethu

Hi Neethu,
Please run the report 'ZRECTIFY_FM_DOCUMENTS' in your system.
Before running the report, create the following selection texts for the parameters/select-options as given below:
P_BUKRS: Company code
S_GJAHR: Fiscal year
S_BELNR: FI document no.
P_TEST:   Test run
For More information please refer <b>SAP Note: 309619</b>
Best Regards,
Johnny.

Urgent: Function module for getting the input from user using a pop up

Hi all,
My requirement at user commmand a pop up should appear asking the user to enter the session name for the bdc session to be created.
My report allows the user to enter the session name of his choice.
I need the name of the function module which can do this.
Thanks
Pritish

better to create one FM to pop-up.
check this :
function y_pop_up_get_distributor_time.
*"*"Local interface:
*" IMPORTING
*"     REFERENCE(W_ROUTE) LIKE VBAP-ROUTE
*"     REFERENCE(W_VBELN) LIKE VBAK-VBELN
*"     REFERENCE(W_VGBEL) LIKE VBAK-VGBEL
*"     REFERENCE(W_VSTEL) LIKE VBRP-VSTEL
*"     REFERENCE(W_AUART) LIKE VBAK-AUART
*" EXPORTING
*"     REFERENCE(W_FROM_DATE) TYPE SY-DATUM
*"     REFERENCE(W_FROM_TIME) TYPE SY-UZEIT
*"     REFERENCE(W_TO_DATE) TYPE SY-DATUM
*"     REFERENCE(W_TO_TIME) TYPE SY-UZEIT
*"     REFERENCE(W_TKNUM) TYPE VTTK-TKNUM
*"     REFERENCE(W_RC) TYPE SY-SUBRC
*"     REFERENCE(W_DEPT_DATE) TYPE SY-DATUM
*"     REFERENCE(W_DEPT_TIME) TYPE SY-UZEIT
*"     REFERENCE(W_REPO_DATE) TYPE SY-DATUM
*"     REFERENCE(W_REPO_TIME) TYPE SY-UZEIT
*"     REFERENCE(W_PLNT_DATE) TYPE SY-DATUM
*"     REFERENCE(W_PLNT_TIME) TYPE SY-UZEIT
*"     REFERENCE(W_TRUCK_NO) TYPE YW2_TIMEENTRY-TRUCKNO
*"     REFERENCE(W_LIFNRN) TYPE YW2_TIMEENTRY-LIFNR
* SET PF-STATUS 'STATUS_100' OF PROGRAM SAPLZ2SLS.
*CLEAR:W_DATE_FROM, W_DS_TIME_1, W_ADATE,
*      W_ATIME,W_BDATE,W_BTIME, W_CDATE, W_CTIME.
clear : w_route1, w_vbeln1,w_vgbel1,
        w_vstel1,w_auart1.
w_route1 = w_route.
w_vbeln1 = w_vbeln.
w_vgbel1 = w_vgbel.
w_vstel1 = w_vstel.
w_auart1 = w_auart.
clear: w_date_to, w_date_from, w_adate,w_atime,
         w_ds_time_1, w_ds_time_2,
         w_bdate, w_btime, w_cdate, w_ctime.
call screen 100 starting at 10 2 ending at 115 13.
if w_ok_code = 'SAVE'.
    w_rc = 0.
    w_from_date = w_date_from.
    w_from_time = w_ds_time_1.
    w_to_date    = w_date_to.
    w_to_time    = w_ds_time_2.
    w_tknum      = w_tknum.
    w_dept_date = w_adate.
    w_dept_time = w_atime.
    w_repo_date = w_bdate.
    w_repo_time = w_btime.
    w_plnt_date = w_cdate.
    w_plnt_time = w_ctime.
    w_truck_no   = sg_truckno.
    w_lifnrn     = w_lifnr.
else.
    w_rc = 1.
endif.
* IF w_ok_code = 'CANC'.
*    W_rc = 1.
* ELSE.
*    W_rc = 0.
*    W_FROM_DATE = w_date_from.
*    W_FROM_TIME = w_ds_time_1.
*    W_TO_DATE    = w_date_to.
*    W_TO_TIME    = w_ds_time_2.
*    W_TKNUM      = W_TKNUM.
*    W_DEPT_DATE = W_ADATE.
*    W_DEPT_TIME = W_ATIME.
*    W_REPO_DATE = W_BDATE.
*    W_REPO_TIME = W_BTIME.
*    W_PLNT_DATE = W_CDATE.
*    W_PLNT_TIME = W_CTIME.
* ENDIF.
clear w_ok_code.
endfunction.
Regards
Prabhu

Function module for getting the created or changed by user

hi ,
iam using the t-code ob 52
inthat iam i not getting the created or changed by user
so is there any function module which gives created r changed
by user .
it shhould take the input as t-code and it has to display
the created r changed by user ........
pls help ..........

In OB52, in menu : Utilities, change log. This use Database log analysis. Try calling transaction [SCU3|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_forums_rm&query=scu3&adv=false&sortby=cm_rnd_rankvalue].
SCU3 transaction call report [RSTBHIST|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_forums_rm&query=rstbhist&adv=false&sortby=cm_rnd_rankvalue] which call [RSVTPROT|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_forums_rm&query=rsvtprot&adv=false&sortby=cm_rnd_rankvalue]. You may also use FM like [DBLOG_EVAL_CALL_FOR_SEL_OBJECT|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_forums_rm&query=dblog_eval_call_for_sel_object&adv=false&sortby=cm_rnd_rankvalue] or [DBLOG_EVAL_CALL_FOR_SEL_CHAP|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_forums_rm&query=dblog_eval_call_for_sel_chap&adv=false&sortby=cm_rnd_rankvalue], perform some where-used on RSVTPROT.
Regards

Any Function Module For getting Shipment Details

Hi All,
I want to get all details of shipment. i tired , but unable to get any function? I was able to find the creation or change shipment function modules, but not able to find the function module for getting the details for Shipment.
like BAPI_SHIPMENT_CHANGE Change Shipment
BAPI_SHIPMENT_CREATE Create Shipment
similary
Do you have any idea for getting (display)the details of Shipments?
Regards,
Raju

hi,
you can use
VTTP,VTTK
or
RV_SHIPMENT_READ

Function Module for getting the desired date

Similar Messages

Maybe you are looking for