Function Module for getting the System time.
Hello All,
Which is the Function Module used in APO to get the system time?
Thanks for your response in advance.
Regards, Chirag
Hi Chirag,
Please try the following function modules
1) /SAPAPO/CRES_GET_TIMESTREAM_BT
2) /SAPAPO/OM_TIME_GET
The field name for system time is UZEIT under
structure SYST
Also try
3) CALENDAR_GET_TIMESTAMP
4) SAL_CSM_RECEIVER
I guess the third one will have your required data
Regards
R. Senthil Mareeswaran.
Similar Messages
-
Function Module for getting the Sales Price for a condition type
Hi,
I am looking for a standard function module to which I can pass my condition type(new customizing) and it will return the sales price. The customer is going to create some new condition type to manitain the sales price. I'll have the necessary information like material/sales org/distribution channel, customer and need the standard function module to read the condition records for that condition type(as configured) and give me the price. PLease help if you know of a standard function module performing this.
Thanks in advance.
Regards
MalthiHi malthi ,
welcome to sdn
for material sales area u can look for the validations is table MVKE.
the classification of the conditions is in tables like A901, a902 etc which in my opinion holds the condition types per classification .
put a A* in se11 and this will give the list of tables per classification .
u need to get the conditions as per kschl and dmbtr and
etc..
like this ..
Get Condition Values for Material/Plant combination
IF NOT i_a916[] IS INITIAL.
SELECT knumh kappl kschl krech
kbetr konwa kpein kmein
INTO TABLE i_konp
FROM konp
FOR ALL ENTRIES IN i_a916
WHERE knumh EQ i_a916-knumh AND
kappl EQ i_a916-kappl AND
kschl EQ i_a916-kschl AND
loevm_ko NE 'X'.
ENDIF.
Get Condition Values for Material/Plant/Ordertype/
Customer combination
IF NOT i_a925[] IS INITIAL.
SELECT knumh kappl kschl krech
kbetr konwa kpein kmein
APPENDING TABLE i_konp
FROM konp
FOR ALL ENTRIES IN i_a925
WHERE knumh EQ i_a925-knumh AND
kappl EQ i_a925-kappl AND
kschl EQ i_a925-kschl AND
loevm_ko NE 'X'.
ENDIF.
just check this Fm if u can apply ur condition over here ..
ME_GET_PRICE_CONDITION
regards,
VIjay. -
Function module for getting the open qty
HI experts,
I have a PO quantity(EKPO_MENGE).against same PO and item item(EBELN and EBELP) if Goods receipt has happened (MSEG_ERFMG) then i need to calculate the open qty.and also by netting the open quantity if multiple GRs has done against the same PO and item.
Can you suggest any function module to get this open PO quantity.Hello,
Hope this link can help you.
[Po Open Quantity;
Thanks
Jayant -
Function module for getting the all PO waiting for release
Hi,
Is there any standard Function module for gettting all the PO's which all waiting for release.
Regards
Bala.hi Bala,
ECC 6.0 Exits for VA01
go through the above link i think that will help u...
Regards,
sindhu. -
Function module for getting the text.
Hi ,
Is there any funcion module to get the message text if i pass the message no and message class as the exporting parameter.
Useful answers will be rewarded.
Regards,
neslin.hi...
use this one
BAPI_MESSAGE_GETDETAIL
ok and following are for display
LMON_MESSAGE_DISPLAY
LTIF_MESSAGE_DISPLAY
reward..points -
Function module for getting the partner details and Classifications
Hi,
Can any one tell me FMs for getting the Partner Details and for getting the characteristics associated with an equipment??
ThanksHi Anu,
are you talking about the SAP Business Partner???
Well, if yes, then just check the FM 'BAPI_BUPA_CENTRAL_GETDETAIL'.
Or just search for oher FMs with BAPI_BUPA*.
Hope this helps...
Ciao Bernhard -
DDIF Function Module for getting the description of a BAPI structure
Hi,
I need to find a function module that returns the description of a structure...well a BAPI structure, not that that makes any difference.
The DDIF_ function modules I've tried will all return the descriptions of data elements in tables, but not structures.
Thanks,
TristanCheck FM : CACS_DBNAME2TABNAME
-
Function Module for getting the desired date
Hi All,
I need a function module where in get the date value from Current date - 540 days.
i,e System Date - 540 days = ????
Thanks
Sureshprevious FM works good , this is for ur info , to give in month, date and year instead of onlly days
CALL FUNCTION 'RP_CALC_DATE_IN_INTERVAL'
EXPORTING
date = sy-datum
months = '00'
days = '07'
years = '00'
signum = '-'
IMPORTING
calc_date = w_due_date.
Message was edited by: chandrasekhar jagarlamudi
Message was edited by: chandrasekhar jagarlamudi -
Urgent: Function module for getting the input from user using a pop up
Hi all,
My requirement at user commmand a pop up should appear asking the user to enter the session name for the bdc session to be created.
My report allows the user to enter the session name of his choice.
I need the name of the function module which can do this.
Thanks
Pritishbetter to create one FM to pop-up.
check this :
function y_pop_up_get_distributor_time.
*"*"Local interface:
*" IMPORTING
*" REFERENCE(W_ROUTE) LIKE VBAP-ROUTE
*" REFERENCE(W_VBELN) LIKE VBAK-VBELN
*" REFERENCE(W_VGBEL) LIKE VBAK-VGBEL
*" REFERENCE(W_VSTEL) LIKE VBRP-VSTEL
*" REFERENCE(W_AUART) LIKE VBAK-AUART
*" EXPORTING
*" REFERENCE(W_FROM_DATE) TYPE SY-DATUM
*" REFERENCE(W_FROM_TIME) TYPE SY-UZEIT
*" REFERENCE(W_TO_DATE) TYPE SY-DATUM
*" REFERENCE(W_TO_TIME) TYPE SY-UZEIT
*" REFERENCE(W_TKNUM) TYPE VTTK-TKNUM
*" REFERENCE(W_RC) TYPE SY-SUBRC
*" REFERENCE(W_DEPT_DATE) TYPE SY-DATUM
*" REFERENCE(W_DEPT_TIME) TYPE SY-UZEIT
*" REFERENCE(W_REPO_DATE) TYPE SY-DATUM
*" REFERENCE(W_REPO_TIME) TYPE SY-UZEIT
*" REFERENCE(W_PLNT_DATE) TYPE SY-DATUM
*" REFERENCE(W_PLNT_TIME) TYPE SY-UZEIT
*" REFERENCE(W_TRUCK_NO) TYPE YW2_TIMEENTRY-TRUCKNO
*" REFERENCE(W_LIFNRN) TYPE YW2_TIMEENTRY-LIFNR
* SET PF-STATUS 'STATUS_100' OF PROGRAM SAPLZ2SLS.
*CLEAR:W_DATE_FROM, W_DS_TIME_1, W_ADATE,
* W_ATIME,W_BDATE,W_BTIME, W_CDATE, W_CTIME.
clear : w_route1, w_vbeln1,w_vgbel1,
w_vstel1,w_auart1.
w_route1 = w_route.
w_vbeln1 = w_vbeln.
w_vgbel1 = w_vgbel.
w_vstel1 = w_vstel.
w_auart1 = w_auart.
clear: w_date_to, w_date_from, w_adate,w_atime,
w_ds_time_1, w_ds_time_2,
w_bdate, w_btime, w_cdate, w_ctime.
call screen 100 starting at 10 2 ending at 115 13.
if w_ok_code = 'SAVE'.
w_rc = 0.
w_from_date = w_date_from.
w_from_time = w_ds_time_1.
w_to_date = w_date_to.
w_to_time = w_ds_time_2.
w_tknum = w_tknum.
w_dept_date = w_adate.
w_dept_time = w_atime.
w_repo_date = w_bdate.
w_repo_time = w_btime.
w_plnt_date = w_cdate.
w_plnt_time = w_ctime.
w_truck_no = sg_truckno.
w_lifnrn = w_lifnr.
else.
w_rc = 1.
endif.
* IF w_ok_code = 'CANC'.
* W_rc = 1.
* ELSE.
* W_rc = 0.
* W_FROM_DATE = w_date_from.
* W_FROM_TIME = w_ds_time_1.
* W_TO_DATE = w_date_to.
* W_TO_TIME = w_ds_time_2.
* W_TKNUM = W_TKNUM.
* W_DEPT_DATE = W_ADATE.
* W_DEPT_TIME = W_ATIME.
* W_REPO_DATE = W_BDATE.
* W_REPO_TIME = W_BTIME.
* W_PLNT_DATE = W_CDATE.
* W_PLNT_TIME = W_CTIME.
* ENDIF.
clear w_ok_code.
endfunction.
Regards
Prabhu -
Function module for getting the created or changed by user
hi ,
iam using the t-code ob 52
inthat iam i not getting the created or changed by user
so is there any function module which gives created r changed
by user .
it shhould take the input as t-code and it has to display
the created r changed by user ........
pls help ..........In OB52, in menu : Utilities, change log. This use Database log analysis. Try calling transaction [SCU3|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_forums_rm&query=scu3&adv=false&sortby=cm_rnd_rankvalue].
SCU3 transaction call report [RSTBHIST|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_forums_rm&query=rstbhist&adv=false&sortby=cm_rnd_rankvalue] which call [RSVTPROT|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_forums_rm&query=rsvtprot&adv=false&sortby=cm_rnd_rankvalue]. You may also use FM like [DBLOG_EVAL_CALL_FOR_SEL_OBJECT|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_forums_rm&query=dblog_eval_call_for_sel_object&adv=false&sortby=cm_rnd_rankvalue] or [DBLOG_EVAL_CALL_FOR_SEL_CHAP|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_forums_rm&query=dblog_eval_call_for_sel_chap&adv=false&sortby=cm_rnd_rankvalue], perform some where-used on RSVTPROT.
Regards -
Any Function Module For getting Shipment Details
Hi All,
I want to get all details of shipment. i tired , but unable to get any function? I was able to find the creation or change shipment function modules, but not able to find the function module for getting the details for Shipment.
like BAPI_SHIPMENT_CHANGE Change Shipment
BAPI_SHIPMENT_CREATE Create Shipment
similary
Do you have any idea for getting (display)the details of Shipments?
Regards,
Rajuhi,
you can use
VTTP,VTTK
or
RV_SHIPMENT_READ -
Function module to get the BOM details for a material-plant combination
hi
Is there any function module to get the BOM details such as
BOM Usage -STLAN
Alternative BOM -STLAL
Items -POSNR
Required Quantity-EMENG
Resulting Quantity-MENGE
Unit of measure -BMEIN
Base unit of measure-MEINS
for a given material-plant combination
if so please suggest me some FMs.................
Awaiting for ur reply..............try the below fm it may be useful for you
DATA : BEGIN OF I_BOM OCCURS 0.
INCLUDE STRUCTURE STPOX.
DATA : END OF I_BOM.
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
EXPORTING
CAPID = 'PP01'
DATUV = SY-DATUM
MEHRS = 'X'
MTNRV = P_MATNR
WERKS = P_WERKS
TABLES
STB = I_BOM
EXCEPTIONS
ALT_NOT_FOUND = 1
CALL_INVALID = 2
MATERIAL_NOT_FOUND = 3
MISSING_AUTHORIZATION = 4
NO_BOM_FOUND = 5
NO_PLANT_DATA = 6
NO_SUITABLE_BOM_FOUND = 7
CONVERSION_ERROR = 8
OTHERS = 9.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
just befor use it check your application area.for my case it is PP01. you can find it in CS12 when you are exploding the bom the value you are giving in BOM application that is the value for CAPID.
Just go to se37 and checkout the fm it has lot of options here I am using the minimum things.
regards
shiba dutta -
Creation of function module for updating the ztable
Hi,
I am sending the requirement for ceation of function module for updating the ztable.
Requirement----
Table Updation rule (New record)
While creating a new record the calling function will export the following to the table handling function.
Table field Probable Values
ZORDERNO-------> Sales Delivery no in case of sales orderShipment no in case of transfer order
UNAME----
> User ID
ZORDTYPE----
> SALEOR in case of sales orderTRANSF in case of transfer order
ZREFDOCNO----
>Sales Order no in case of sales orderPurchase Order no in case of transfer order
ZREFDOCNO1----
>Delivery no in case of transfer order
The table handling function will calculate the following fields
Table field Probable Values
ZREQNO----
>Running serial number (incremented by 1 for each new record)
ZREQDAT -
>System date
ZREQTIME----
> System time
ZSTATUS----
>OPEN (for all new records)
Before inserting a new record the table handling function will always check if a previous record exists for the same order / shipment no. if record exists the function will not insert a new record.
Table Updation rule (Status Update)
While updating a record the calling function will export the following to the table handling function.
Table field Probable Values
ZORDERNO----
>Sales order no in case of sales orderShipment no in case of transfer order
ZSTATUS----
>CANCEL if cancellation successfulERROR if cancellation not possible (order already processed)
The table handling function will calculate the following fields
Table field Probable Values
ZSTATDAT----
>System date
ZSTATTIME----
> System timeDo you have to create/update new record in Ztable through Function Module ?
or you need to write FM only for validation?
Any how, you need to create a Program with Input values for the fields of Ztable, and for rest of fields the Value can be calculated based on input as per your requirement.
Let me know clearly what exactly u need ?
Regards,
Kiran -
Function Module to get the TIMESTAMP
Hi,
Is there any function module to get the TIMESTAMP as Outout , if i give input Time and Date.
Or,
If I go for the concatenate statement.. Do I need to concate the commas in to the target field?
Because,
I am not getting the proper result with this concatenate statement where I concatenated the YYYYMMDDHHMMSS in to the DECIMAL 15 Variable.
Thanks,
Naveen Inuganti.Hi use
IB_CONVERT_INTO_TIMESTAMP' or IB_CONVERT_FROM_TIMESTAMP'
Example:
* Declaring the work variables.......................
DATA :
timestamp like TZONREF-TSTAMPS,
time like sy-uzeit,
date like sy-datum.
* The following function module is used to convert the
* time and date into GMT timestamp
CALL FUNCTION 'IB_CONVERT_INTO_TIMESTAMP'
EXPORTING
i_datlo = sy-datum
i_timlo = sy-uzeit
I_TZONE = 'INDIA'
IMPORTING
E_TIMESTAMP = timestamp.
* The following function module is used to convert the
* above obtained timestamp to PST time zone date and time.
CALL FUNCTION 'IB_CONVERT_FROM_TIMESTAMP'
EXPORTING
i_timestamp = timestamp
I_TZONE = 'PST'
IMPORTING
E_DATLO = date
E_TIMLO = time.
write :/ 'Date and Time at PST zone is ',date, time. -
To get the system time in milliseconds
i want to get the system time in milliseconds
eventhough the MLS(milliseconds) is given in the select statement as follows,
sql>select to_char(sysdate,'MON:DD:YYYY.HH:HH:MI:SS:MLS') "NOW" from dual;
does not seem to work.
it throws the error that
ORA-01821: date format not recognized
please give a solution
thanks in advance
nullHi,
Yes, any of Oracle tools could not provide the milliseconds.
Then why cant not use external procedures (RPC) and get a time string from OS.
These are steps:
1. Create a C shared library.
(Some times U have to go for OCI programs.)
Milliseconds provision is there in C. ( use tm struct). Make a string as ur format by using any string functions in C or sprintf(). By using return, return this string.
Here error may come, if u are using pure C. Better to go for OCI call back methods.
2. Create oracle library and attach this shared libary with it.
3. Create external procedure/function and connect this.
If u want code, I can post it here.
with regards,
Boby Jose Thekkanth,
Dharma Computers(P) Ltd.
Bangalore-India.
www.dharma.com.
null
Maybe you are looking for
-
Final Cut Studio (ver 1.0) won't install on brand new 2.8 ghz intel coreduo
I just bought a new 15inch MacBook Pro (4 GB memory) and went to install Final Cut Studio (ver 1.0) and then install the Final Cut Studio (HD) upgrade, but when I try to install Final Cut Studio (ver 1.0) I get this error: "Your computer does not hav
-
JS CS3 Relink image to new path
I've put a script together that resizes images in a doc. What I've been able to do is rename the resized image and then relink to the renamed images. I'd like to be able to have all the resized images saved into the folder using the doc name which i
-
I've never had any issue w/ pse, but tonight nothing works. I started w/ a text box - tried to change font, but the list of fonts opens, flashes, disappears, so I'm left w/ an empty box. I literally can't get the program to respond to anything. I'
-
How do I consolidate photos from Finder into iPhoto Library?
I would like to tidy up my photos on my iMac to save space and ensure that all is secure. Iam using iPhoto 08 on my iMac v10.8.5. My preference is to consolidate all my photos into my iphoto library so that I can manage my collection through iPhoto.
-
SPAM / SAINT for EHPI-SPS5
Experts, I am trying to go for EHPI- SPS4 to EHPI-SPS5. For ABAP, I would be using SPAM for importing ABAP support packs. I could see new SPAM/SAINT for 700/701/710/711 versions.. Which version would be appropriate for this situation? Thanks, Raj