Function module for reading payroll results

HI,
I need a function module for reading payroll results RT table.
Import parameters are personal number, payroll area, and payroll period.
Export should be RT table.
Regards,
Wasim Ahmed

Hai Wasim
Check the following Code
data: payroll_cluster like t500l-relid.
    call function 'PYXX_READ_PAYROLL_RESULT'
         exporting
              clusterid                    = payroll_cluster
              employeenumber               = pernr-pernr
              sequencenumber               = payroll-evp-seqnr
            READ_ONLY_BUFFER             = ' '
            READ_ONLY_INTERNATIONAL      = ' '
            CHECK_READ_AUTHORITY         = 'X'
       IMPORTING
            VERSION_NUMBER_PAYVN         =
            VERSION_NUMBER_PCL2          =
         changing
              payroll_result               = payroll_us
        exceptions
             illegal_isocode_or_clusterid = 1
             error_generating_import      = 2
             import_mismatch_error        = 3
             subpool_dir_full             = 4
             no_read_authority            = 5
             no_record_found              = 6
             versions_do_not_match        = 7
             others                       = 8
    if sy-subrc <> 0.
      if sy-subrc <> 0.
        write: / 'Fehler beim Laden des US Abrechnungsergebnisses'(003).
        write: /'zu Personalnummer'(008), pernr-pernr,
                'bei Sequence-Number'(012),
                 payroll-evp-seqnr.
        write: /  'Fehlercode ='(004), sy-subrc.
      endif.
    endif.
Thanks & regards
Sreenivasulu P

Similar Messages

  • Help required in creating function module which reads payroll clusters.

    Hi ,
    We have a requirement where in we need to create a function module for reading a sequence of tables from payroll clusters. This function module does two functions:
    1.Read the payroll results from one system.
    2.write the payroll results to other system.
    please do the needful as soon as possible.
    Thanks in advance.
    Regards,
    Durga.

    hi
    Refer to the below thread
    Programming with Clusters for HR-Payroll
    Regards
    Sameer

  • Function module for reading service line items of a po

    function module for reading service line items of a po.............I want to read data from eslh and esll tables to getthe service line details.....
    My requirement is if the item category is 9 I need to print the service line items. So I wan to read the data of service line items from a function module. I am not able to find a fm which fetches both elsh and esll data...

    Hi oskchaitanya ,
    use bapi BAPI_PO_GETDETAIL1.
    Regards
    REA

  • Function Modul for read field label

    hi all
    i search a function modul for read the field label from data element.
    Example for data element matnr, i must have field label text material.
    Thx abap_begin

    Hi,
    If you give input parameters type, field and table you get data element using
    RP_PRINT_GET_DATA_ELEMENT
    Try also
    KL_TABLE_INFO_GET
    But not sure if this futfill your requirement...

  • What are the sequence of function modules executed in payroll result

    Dear all,
    what are the sequence of function modules executed  while retrivieng pryroll result.or
    functionmodule sequence in payroll programming.
    By
    bose

    Hi Bose,
    The sequence of FM executed in payroll result are
    1. cu_read_rgdir ---> from this u will get the country key.
    2. cd_read_last -
    > from this fm u will identify the seqnr for the latest record and finally for the payroll result
    3. pyxx_read_payroll_result.

  • SAP HR Function Module for reading RT

    Hi,
    Is there any function module in SAP HR which takes multiple employee numbers and period as input and gives payroll results as output.
    Thanks,
    Nidhi

    There is no FM for that
    But you can try reading the cluster by using import export commands.
    Regards,
    Manu

  • RFC for reading payroll results into Accounting

    hi folks,
    I have the HR payroll results forwarded to accounting. I need to display these results in the accounting system. Is there a RFC enabled function module to do that?
    your help is really appreciated.
    thanks
    Vinu

    Hi
    Well there’s a Fm "RFC_READ_TABLE" , if you have authorization of target  system you can read PCL1,2 Tables.
    Here`s the FM "BAPI_GET_PAYROLL_RESULT_LIST"
    Hope this’ll help you
    Thanks
    Message was edited by: Suleman Javed

  • Function Module for getting Payroll start date and end date

    Hi Gurus,
      If I give one date then is there any function module to find the payroll period start date and enddate for that given date?
    Points will be awarded
    Thanks
    Ravi

    Hi,
      Try these FMs
    HR_PAYROLL_PERIODS_GET
    HR_BEN_PAY_GET_PAYROLL_PERIODS
    HR_PAYROLL_PERIOD_GET
    HR_P06I_GET_PAYROLL_PERIOD
    Regards,
    PRashant

  • Function Module for reading PCL2 - B2 FEHLER table

    Hi,
       Is there any function module can use to read the FEHLER table messages? There is a standard program called RPTERL00 that used to read the FEHLER messages. However, I wish to simplified and use FM to get all the FEHLER table data in my customise program. I will need to delete some of the entries in FEHLER table after the correction has been done. Do you know how to do this?
    Thanks in advance.

    Hi, You don't need pass any data for table tgetbuff .
    Try this simple report. It's work for me:
    REPORT  Z_JRQ038R NO STANDARD PAGE HEADING
                     LINE-COUNT 65
                     LINE-SIZE 175.
    * D.A.T.A.
    DATA: IT_FL TYPE PC2B8 OCCURS 0 WITH HEADER LINE.
    DATA:  BEGIN OF tgetbuff occurs 0,
                  x(10),
               END OF tgetbuff.
    * S.E.L.L.E.C.T.I.O.N.  .S.C.R.E.E.N.
      SELECTION-SCREEN BEGIN OF BLOCK BL02 WITH FRAME TITLE TEXT-S20.
        PARAMETERS:
          PERNR LIKE PA0001-PERNR,
          YEAR  LIKE T549Q-PABRJ,
          MONTH LIKE T549Q-PABRP.
      SELECTION-SCREEN END OF BLOCK BL02.
    * M.A.I.N.  .P.R.O.G.R.A.M.
    START-OF-SELECTION.
      CALL FUNCTION 'HR_TIME_RESULTS_GET'
        EXPORTING
          GET_PERNR     = PERNR
          GET_PABRJ     = YEAR
          GET_PABRP     = MONTH
        TABLES
          GET_TBUFF     = TGETBUFF
          GET_FEHLER    = IT_FL
        EXCEPTIONS
          NO_PERIOD_SPECIFIED   = 1
          WRONG_CLUSTER_VERSION = 2
          NO_READ_AUTHORITY     = 3
          CLUSTER_ARCHIVED      = 4
          TECHNICAL_ERROR       = 5
          OTHERS                = 6.
      CHECK IT_FL[] IS NOT INITIAL.
      LOOP AT IT_FL.
        WRITE: / IT_FL-LDATE, SPACE, IT_FL-LTIME, SPACE, IT_FL-ERRTY.
      ENDLOOP.
    Regards,

  • Available Function Modules for Reading Master Recipe Info...

    Hi
    Is there a function module(s) available in ECC to read Master Recipe info.for Material/Plant inputs?
    Thanks
    Bluesclues

    Dear
    Try the folloiwng :
    1.BAPI_CONTROL_RECIPE_GET_LIST Read control recipe
    2.BAPI_CONTROL_RECIPE_REQUEST Request and transfer control
    3.MRTRS300_MASTER_RECIPE_READ  
    4.BAPI_CONTROL_RECIPE_GET_LIST
    5.MRTRS300_MASTER_RECIPE_SAVE (Save Master Recipe data from internal table )
    6.MRTRS300_MASTER_RECIPE_WRITE (Write Master Recipe data into internal table)
    Regards
    JH

  • Function Modul for Order Number from VA02

    Hallo
    i have a delivery number and want read the order number from VA02.
    Of course, select the database from LIKP --> LIPS --> VBKD is possible but 
    maybe it has function modul for read the order number from transaction VA02.
    THX ANU

    Hi,
    I think is better recover the data directly from DB tables (in table LIPS you have the fields VGBEL, VGPOS, VGTYP ) if you only want the order number.
    With the delivery number you only need to acces 1 table. If you use a FM, you will recover this data and a few fields that is not interesting for you. The access to table LIPS is using table index (delivery number)
    Regards,
    Pepe

  • Buffered Function Modules for EKKO, EKPO, EKBE, EKES etc

    Hi,
    Could you please let me know of some buffered function modules for reading data from EKKO EKPO EKBE EKES EKET?
    Regards,
    Suraj

    Try BAPI_PO_GETDETAIL  , BAPI_PO_GETITEMS  , BAPI_PO_GET_LIST

  • Function module for calculating sigma balance

    Is there  any function module available in SAP for calculating sigma balance.
    Thanks
    Gaurav

    hi
    ABAP_DOCU_DOWNLOAD     Download ABAP documentation in HTML format.
    APPL_LOG_DELETE     With this function module you delete logs in the database according to specified selection conditions
    APPL_LOG_DISPLAY     With this function module you can analyze logs in the database.
    APPL_LOG_DISPLAY_INTERN     With this function module you can analyze logs in local memory, e.g. when you have only collected log records at runtime and do not want to write to the database.
    APPL_LOG_INIT     This function module checks whether the specified object or sub-object exists and deletes all existing associated data in local memory.
    APPL_LOG_READ_DB     With this function module you read the log data in the database for an object or sub-object according to specified selection conditions.
    APPL_LOG_READ_INTERN     With this function module you read all log data whose log class has at least the specified value, from local memory, for the specified object or sub-object.
    APPL_LOG_SET_OBJECT     With this function module, you create a new object or sub-object for writing in local memory. With a flag you can control whether the APPL_LOG_WRITE_... messages are written in local memory or are output on the screen.
    APPL_LOG_WRITE_DB     With this function module you write all data for the specified object or sub-object in local memory to the database. If the log for the object or sub-object in question is new, the log number is returned to the calling program.
    APPL_LOG_WRITE_HEADER     With this function module, you write the log header data in local memory.
    APPL_LOG_WRITE_LOG_PARAMETERS     With this function module, you write the name of the log parameters and the associated values for the specified object or sub-object in local memory. If this function module is called repeatedly for the same object or sub-object, the existing parameters are updated accordingly. If you do not specify an object or sub-object with the call, the most recently used is assumed.
    APPL_LOG_WRITE_MESSAGE_PARAMS     With this function module you write a single message, with parameters, in local memory. Otherwise the function module works like APPL_LOG_WRITE_SINGLE_MESSAGE.
    APPL_LOG_WRITE_MESSAGES     With this function module you write one or more messages, without parameters, in local memory.
    APPL_LOG_WRITE_SINGLE_MESSAGE     With this function module you write a single message, without parameters, in local memory. If no header entry has yet been written for the object or sub-object, it is created. If you do not specify an object or sub-object with the call, the most recently used is assumed.
    ARFC_GET_TID     will return the IP address of the terminal in hex.
    BAL_CNTL_CREATE     Create Control for log display
    BAL_CNTL_FREE     Release Control
    BAL_CNTL_REFRESH     Put new data in log display
    BAL_DB_DELETE     Delete logs from the database
    BAL_DB_DEQUEUE     Unlock log
    BAL_DB_ENQUEUE     Lock log
    BAL_DB_LOAD     Load logs from the database
    BAL_DB_LOAD     Load log(s)
    BAL_DB_SAVE     Save logs in the database
    BAL_DB_SAVE     Save log(s)
    BAL_DB_SAVE_PREPARE     Prepare save
    BAL_DB_SEARCH     Find logs in the database
    BAL_DSP_LOG_DISPLAY     Display messages in memory
    BAL_DSP_LOG_DISPLAY     Display Log
    BAL_DSP_LOG_PARAMETERS     Either output extended long text or call a callback routine (based on the data in BAL_S_LOG-PARAMS)
    BAL_DSP_LOG_TECHNICAL_DATA     Output all log header data
    BAL_DSP_MSG_LONGTEXT     Display message long text
    BAL_DSP_MSG_PARAMETERS     Either output extended long text or call a callback routine (based on the data in BAL_S_MSG-PARAMS)
    BAL_DSP_MSG_TECHNICAL_DATA     Output technical data of a message such as work area, error number, etc.
    BAL_DSP_OUTPUT_FREE     End output
    BAL_DSP_OUTPUT_INIT     Initialize output
    BAL_DSP_OUTPUT_SET_DATA     Set dataset to be displayed
    BAL_DSP_PROFILE_DETLEVEL_GET     Message hierarchy in DETLEVEL
    BAL_DSP_PROFILE_NO_TREE_GET     Display without tree (fullscreen)
    BAL_DSP_PROFILE_POPUP_GET     Display without tree (popup)
    BAL_DSP_PROFILE_SINGLE_LOG_GET     Standard profile (SLG1) for one log
    BAL_DSP_PROFILE_STANDARD_GET     Standard profile (SLG1) for a lot of logs
    BAL_GLB_AUTHORIZATION_GET     Assign authorization
    BAL_GLB_AUTHORIZATION_RESET     Reset authorization
    BAL_GLB_CONFIG_GET     Read configuration
    BAL_GLB_CONFIG_SET     Set configuration
    BAL_GLB_MEMORY_EXPORT     Put function group memory in ABAP-MEMORY
    BAL_GLB_MEMORY_IMPORT     Get function group memory from ABAP-MEMORY
    BAL_GLB_MEMORY_REFRESH     (Partially) reset global memory
    BAL_GLB_MEMORY_REFRESH     (Partially) initialize memory
    BAL_GLB_MSG_CURRENT_HANDLE_GET     Get current message handle
    BAL_GLB_MSG_DEFAULTS_GET     Get message defaults
    BAL_GLB_SEARCH_LOG     Find logs in memory
    BAL_GLB_SEARCH_MSG     Find messages in memory
    BAL_LOG_CREATE     Create log with header data
    BAL_LOG_CREATE     Create log with header data
    BAL_LOG_DELETE     Delete log (from database also at Save)
    BAL_LOG_EXIST     Check existence of a log in memory
    BAL_LOG_HDR_CHANGE     Change log header
    BAL_LOG_HDR_CHECK     Check log header data for consistency
    BAL_LOG_HDR_READ     Read log header and other data
    BAL_LOG_MSG_ADD     Put message in log
    BAL_LOG_MSG_ADD     Put message in log
    BAL_LOG_MSG_CHANGE     Change message
    BAL_LOG_MSG_CHANGE     Change message
    BAL_LOG_MSG_CHECK     Check message data for consistency
    BAL_LOG_MSG_CUMULATE     Add message cumulated
    BAL_LOG_MSG_DELETE     Delete message
    BAL_LOG_MSG_DELETE     Delete message
    BAL_LOG_MSG_EXIST     Check existence of a message in memory
    BAL_LOG_MSG_READ     Read message and other data
    BAL_LOG_MSG_REPLACE     Replace last message
    BAL_LOG_REFRESH     Delete log from memory
    BAL_LOG_REFRESH     Delete log from memory
    BAL_MSG_DISPLAY_ABAP     Output message as ABAP-MESSAGE
    BAL_OBJECT_SELECT     Read Application Log objects table record
    BAL_OBJECT_SUBOBJECT     Check whether object and subobject exist and the combination is allowed
    BAL_SUBOBJECT_SELECT     Read subobject table record
    BP_EVENT_RAISE     Trigger an event from ABAP/4 program
    BP_JOBLOG_READ     Fetch job log executions
    CHANGEDOCUMENT_READ_HEADERS     Get the change document header for a sales document, and put the results in an internal table.
    Example:
          CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
               EXPORTING
                    objectclass = 'EINKBELEG'
                    objectid    = l_objectid
                    username    = space
               TABLES
                    i_cdhdr     = lt_cdhdr.
          LOOP AT lt_cdhdr WHERE udate IN s_aedat.
            CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
                 EXPORTING
                      changenumber = lt_cdhdr-changenr
                 TABLES
                      editpos      = lt_editpos.
            LOOP AT lt_editpos WHERE fname = 'LOEKZ'
                               AND   f_new = 'L'.
              p_desc = text-r01. " Cancel Contract
            ENDLOOP.
          ENDLOOP.
    CHANGEDOCUMENT_READ_POSITIONS     Get the details of a change document, and store them in an internal table. This will tell you whether a field was changed, deleted, or updated.
    Example:
          CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
               EXPORTING
                    objectclass = 'EINKBELEG'
                    objectid    = l_objectid
                    username    = space
               TABLES
                    i_cdhdr     = lt_cdhdr.
          LOOP AT lt_cdhdr WHERE udate IN s_aedat.
            CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
                 EXPORTING
                      changenumber = lt_cdhdr-changenr
                 TABLES
                      editpos      = lt_editpos.
            LOOP AT lt_editpos WHERE fname = 'LOEKZ'
                               AND   f_new = 'L'.
              p_desc = text-r01. " Cancel Contract
            ENDLOOP.
          ENDLOOP.
    CLAF_CLASSIFICATION_OF_OBJECTS     Return all of the characteristics for a material
    CLOI_PUT_SIGN_IN_FRONT     Move the negative sign from the left hand side of a number, to the right hand side of the number. Note that The result will be left justified (like all character fields), not right justifed as numbers normally are.
    CLPB_EXPORT     Export a text table to the clipboard (on presentation server)
    CLPB_IMPORT     Import a Text Table from the Clipboard (on presentation server)
    COMMIT_TEXT     To load long text into SAP
    CONVERSION_EXIT_ALPHA_INPUT     converts any number into a string fill with zeroes, with the number at the extreme right
    Example:
    input  = 123
    output = 0000000000000...000000000000123
    CONVERSION_EXIT_ALPHA_OUTPUT     converts any number with zeroes right into a simple integer
    Example:
    input   = 00000000000123
    output  = 123
    CONVERT_ABAPSPOOLJOB_2_PDF     convert abap spool output to PDF
    CONVERT_OTF     Convert SAP documents (SAPScript) to other types.
    Example:
    CALL FUNCTION "CONVERT_OTF"
           EXPORTING    FORMAT                = "PDF"
           IMPORTING    BIN_FILESIZE          = FILE_LEN
           TABLES       OTF                   = OTFDATA
                        LINES                 = PDFDATA
           EXCEPTIONS   ERR_MAX_LINEWIDTH     = 1                  
                        ERR_FORMAT            = 2
                        ERR_CONV_NOT_POSSIBLE = 3
                        OTHERS                = 4.
    CONVERT_OTFSPOOLJOB_2_PDF     converts a OTF spool to PDF (i.e. Sapscript document)
    CONVERT_TO_FOREIGN_CURRENCY     Convert local currency to foreign currency.
    CONVERT_TO_LOCAL_CURRENCY     Convert from foreign currency to local currency
    DATE_CHECK_PLAUSIBILITY     Check to see if a date is in a valid format for SAP. Works well when validating dates being passed in from other systems.
    DATE_COMPUTE_DAY     Returns a number indicating what day of the week the date falls on. Monday is returned as a 1, Tuesday as 2, etc.
    DATE_GET_WEEK     will return the week that a date is in.
    DATE_IN_FUTURE     Calculate a date N days in the future.
    DAY_ATTRIBUTES_GET
    Return useful information about a day. Will tell you the day of the week as a word (Tuesday), the day of the week (2 would be Tuedsay), whether the day is a holiday, and more.(provided by Francois Henrotte)
    DOWNLOAD     download a file to the presentation server (PC)
    DYNP_VALUES_READ     Read the values from a dynpro. This function can be used to read the values from a report's selection screen too (Another example).
    DYNP_VALUES_UPDATE     Similar to DYNP_VALUES_READ, this function will allow the updating of fields on a dynpro. Very useful when you want to change a field based on the value entered for another field.
    ENQUE_SLEEP     Wait a specified period of time before continuing processing.
    ENQUEUE_ESFUNCTION     Lock an abap program so that it cannot be executed.
    Example:
    Set the parameters as follows:
      RELID = 'ZZ'
      SRTF2 = 0
      SRTF = (your report name)
    Please note that you should not use SY-REPID to pass your report name to the function. The value of SY-REPID will change as it is being passed to the function module, and will no longer hold the value of the calling report.
    EPS_GET_DIRECTORY_LISTING     return a list of filenames from a local or network drive
    EPS_GET_FILE_ATTRIBUTES     Pass in a filename and a path, and will return attributes for the file
    F4_DATE     displays a calendar in a popup window and allows user to choose a date, or it can be displayed read only.
    F4_IF_FIELD_VALUE_REQUEST     Use values from a DDIC table to provide a list of possible values. TABNAME and FIELDNAME are required fields, and when MULTIPLE_CHOICE is selected, more than one value can be returned.
    F4IF_INT_TABLE_VALUE_REQUEST     F4 help that returns the values selected in an internal table. Very handy when programming your very own F4 help for a field.
    Example:
    data:
        begin of t_values occurs 2,
          value like kna1-begru,
        end of t_values,
        t_return like ddshretval occurs 0 with header line.
      t_values = 'PAR*'.
      append t_values.
      t_values = 'UGG'.
      append t_values.
      call function 'F4IF_INT_TABLE_VALUE_REQUEST'
           exporting
                retfield        = 'BEGRU'
                value_org       = 'S'
           tables
                value_tab       = t_values
                return_tab      = t_return
           exceptions
                parameter_error = 1
                no_values_found = 2
                others          = 3.
      if sy-subrc = 0.
        read table t_return index 1.
        o_begru-low = t_return-fieldval.
        if o_begru-low = 'PAR*'.
          o_begru-option = 'CP'.
        else.
          o_begru-option = 'EQ'.
        endif.
        o_begru-sign = 'I'.
        append o_begru to s_begru.
      else.
        o_begru = i_begru.
      endif.
    F4IF_SHLP_EXIT_EXAMPLE     documents the different reasons to use a search help exit, and shows how it is done.
    F4IP_INT_TABLE_VALUE_REQUEST     This function does not exist in 4.6 and above. Use F4IF_INT_TABLE_VALUE_REQUEST instead.
    FILENAME_GET     popup to get a filename from a user, returns blank filename if user selects cancel
    FORMAT_MESSAGE     Takes a message id and number, and puts it into a variable. Works better than WRITE_MESSAGE, since some messages use $ as a place holder, and WRITE_MESSAGE does not accommadate that, it only replaces the ampersands (&) in the message.
    FTP_COMMAND     Execute a command on the FTP server
    FTP_CONNECT     Open a connection (and log in) to an FTP server
    FTP_DISCONNECT     Close the connection (and log off) the FTP server
    FU CSAP_MAT_BOM_READ     You can use this function module to display simple material BOMs. You cannot display BOM groups (for example, all variants of a variant BOM). as in transaction CS03. Current restrictions: You cannot display long texts. You cannot display sub-items. You cannot display classification data of BOM items for batches. You can only display one alternative or variant. You cannot enter an alternative for module CSAP_MAT_BOM_READ, so you always see alternative 01. The following example came from a posting on the SAP-R3-L mailing list.
    Example:
    data: begin of tstk2 occurs 0.
              include structure stko_api02.
    data: end of tstk2.
    data: begin of tstp2 occurs 0.
              include structure stpo_api02.
    data: end of tstp2.
    data: begin of tdep_data occurs 0.
             include structure csdep_data.
    data: end of tdep_data.
    data: begin of tdep_descr occurs 0.
             include structure csdep_descr.
    data: end of tdep_descr.
    data: begin of tdep_source occurs 0.
             include structure csdep_source.
    data: end of tdep_source.
    data: begin of tdep_order occurs 0.
             include structure csdep_order.
    data: end of tdep_order.
    data: begin of tdep_doc occurs 0.
             include structure csdep_doc.
    data: end of tdep_doc.
    data: flg_warning like capiflag-flwarning.
       call function 'CSAP_MAT_BOM_READ'
            exporting
                 material   = 'MAT100'
                 plant      = '0001'
                 bom_usage  = '1'
                 valid_from = '20.12.1996'
               valid_to
            importing
                 fl_warning = flg_warning
            tables
                 t_stko       = tstk2
                 t_stpo       = tstp2
                 t_dep_data   = tdep_data
                 t_dep_descr  = tdep_descr
                 t_dep_source = tdep_source
                 t_dep_order  = tdep_order
                 t_dep_doc    = tdep_doc
            exceptions
                 error      = 1.
    Function Group GRAP is now obsolete.     SAP recommends using functions in function group SFES instead. Below is an overview of the changes.
    G_SET_GET_ALL_VALUES     Fetch values from a set.
    GET_CURRENT_YEAR     Get the current fiscal year.
    Example:
    CALL FUNCTION 'GET_CURRENT_YEAR'
      EXPORTING
        BUKRS         = '1000'     " Company Code
        DATE          = SY-DATUM   " Date to find fiscal year for
      IMPORTING
        CURRM         = w_currm    " Current Fiscal Month
        CURRY         = w_curry    " Current Fiscal Year
        PREVM         = w_prevm    " Previous Fiscal Month
        PREVY         = w_prevy.   " Previous Fiscal Year
    GET_GLOBAL_SYMBOLS     Returns a list of all tables, select options, texts, etc for a program. Even includes the text definitions for the selection screen
    GET_INCLUDETAB     Returns a list of all INCLUDES in a program
    GET_JOB_RUNTIME_INFO
    Get the current job number from a program. Also returns other useful info about the current job.
    GUI_CREATE_DIRECTORY     Create a directory on the presentation server
    GUI_DELETE_FILE     Replaces WS_FILE_DELETE. Delete a file on the presentation server
    GUI_DOWNLOAD     Replaces WS_DOWNLOAD. Download table from the app server to presentation server
    GUI_EXEC     Replaces WS_EXECUTE. Start a File or Program Asynchronously with WinExec
    GUI_GET_DESKTOP_INFO     Replaces WS_QUERY. Delivers Information About the Desktop (client)
    GUI_REMOVE_DIRECTORY     Delete a directory on the presentation server
    GUI_RUN     Start a File or Program Asynchronously with ShellExecute
    GUI_UPLOAD     Replaces WS_UPLOAD. Upoad file from presentation server to the app server
    HELP_START     Display help for a field. Useful for doing AT SELECTION SCREEN ON VALUE REQUEST for those fields that do not provide F4 help at the DDIC level.
    HELP_VALUES_GET_WITH_TABLE     Show a list of possible values for F4 popup help on selection screens. This function module pops up a screen that is just like all the other F4 helps, so it looks like the rest of the SAP system. Very useful for providing dropdowns on fields that do not have them predefined.
    Example:
    tables: t001w.
    DATA: lc_werks      LIKE t001w-werks,
          ltab_fields LIKE help_value OCCURS 0 with header line,
          BEGIN OF ltab_values OCCURS 0,
            feld(40) TYPE c,
          END OF ltab_values.
    *-- Set up fields to retrieve data
      ltab_fields-tabname    = 'T001W'.
      ltab_fields-fieldname  = 'WERKS'.
      ltab_fields-selectflag = 'X'.
      APPEND ltab_fields.
      ltab_fields-tabname    = 'T001W'.
      ltab_fields-fieldname  = 'NAME1'.
      ltab_fields-selectflag = space.
      APPEND ltab_fields.
    *-- Fill values
      select * from t001w.
        ltab_values-feld = t001w-werks.
        append ltab_values.
        ltab_values-feld = t001w-name1.
        append ltab_values.
      endselect.
    CALL FUNCTION 'HELP_VALUES_GET_WITH_TABLE'
         EXPORTING
              fieldname                 = 'WERKS'
              tabname                   = 'T001W'
              title_in_values_list      = 'Select a value'
         IMPORTING
              select_value              = lc_werks
         TABLES
              fields                    = ltab_fields
              valuetab                  = ltab_values
         EXCEPTIONS
              field_not_in_ddic         = 01
              more_then_one_selectfield = 02
              no_selectfield            = 03.
    HOLIDAY_CHECK_AND_GET_INFO     Useful for determining whether or not a date is a holiday. Give the function a date, and a holiday calendar, and you can determine if the date is a holiday by checking the parameter HOLIDAY_FOUND.
    Example:
    data: ld_date                 like scal-datum  default sy-datum,
          lc_holiday_cal_id       like scal-hcalid default 'CA',
          ltab_holiday_attributes like thol occurs 0 with header line,
          lc_holiday_found        like scal-indicator.
    CALL FUNCTION 'HOLIDAY_CHECK_AND_GET_INFO'
      EXPORTING
        date                               = ld_date
        holiday_calendar_id                = lc_holiday_cal_id
        WITH_HOLIDAY_ATTRIBUTES            = 'X'
      IMPORTING
        HOLIDAY_FOUND                      = lc_holiday_found
      tables
        holiday_attributes                 = ltab_holiday_attributes
      EXCEPTIONS
        CALENDAR_BUFFER_NOT_LOADABLE       = 1
        DATE_AFTER_RANGE                   = 2
        DATE_BEFORE_RANGE                  = 3
        DATE_INVALID                       = 4
        HOLIDAY_CALENDAR_ID_MISSING        = 5
        HOLIDAY_CALENDAR_NOT_FOUND         = 6
        OTHERS                             = 7.
    if sy-subrc = 0 and
       lc_holiday_found = 'X'.
      write: / ld_date, 'is a holiday'.
    else.
      write: / ld_date, 'is not a holiday, or there was an error calling the function'.
    endif.
    HOLIDAY_GET     Provides a table of all the holidays based upon a Factory Calendar &/ Holiday Calendar.
    HR_DISPLAY_BASIC_LIST     is an HR function, but can be used for any data. You pass it data, and column headers, and it provides a table control with the ability to manipulate the data, and send it to Word or Excel. Also see the additional documentation here.
    HR_GET_LEAVE_DATA     Get all leave information (includes leave entitlement, used holidays/paid out holidays)
    HR_IE_NUM_PRSI_WEEKS     Return the number of weeks between two dates.
    HR_PAYROLL_PERIODS_GET
    Get the payroll period for a particular date. (provided by Francois Henrotte)
    Example:
      DATA: IT_T549Q TYPE T549Q OCCURS 0 WITH HEADER LINE,
            IT_ZL TYPE PC2BF OCCURS 0 WITH HEADER LINE.
      W_BEGDA = '20010101'.
      W_PERNR = '00000001'.
      CALL FUNCTION 'HR_PAYROLL_PERIODS_GET'
           EXPORTING
                get_begda       = w_begda
           TABLES
                get_periods     = it_t549q
           EXCEPTIONS
                no_period_found = 1
                no_valid_permo  = 2.
      CHECK sy-subrc = 0.
      CALL FUNCTION 'HR_TIME_RESULTS_GET'
           EXPORTING
                get_pernr             = w_pernr
                get_pabrj             = it_t549q-pabrj
                get_pabrp             = it_t549q-pabrp
           TABLES
                get_zl                = it_zl
           EXCEPTIONS
                no_period_specified   = 1
                wrong_cluster_version = 2
                no_read_authority     = 3
                cluster_archived      = 4
                technical_error       = 5.
    NOTE: it_zl-iftyp = 'A'   absence
          it_zl-iftyp = 'S'   at work
    HR_TIME_RESULTS_GET
    Get the time results for a payroll period. (provided by Francois Henrotte)
    Example:
      DATA: IT_T549Q TYPE T549Q OCCURS 0 WITH HEADER LINE,
            IT_ZL TYPE PC2BF OCCURS 0 WITH HEADER LINE.
      W_BEGDA = '20010101'.
      W_PERNR = '00000001'.
      CALL FUNCTION 'HR_PAYROLL_PERIODS_GET'
           EXPORTING
                get_begda       = w_begda
           TABLES
                get_periods     = it_t549q
           EXCEPTIONS
                no_period_found = 1
                no_valid_permo  = 2.
      CHECK sy-subrc = 0.
      CALL FUNCTION 'HR_TIME_RESULTS_GET'
           EXPORTING
                get_pernr             = w_pernr
                get_pabrj             = it_t549q-pabrj
                get_pabrp             = it_t549q-pabrp
           TABLES
                get_zl                = it_zl
           EXCEPTIONS
                no_period_specified   = 1
                wrong_cluster_version = 2
                no_read_authority     = 3
                cluster_archived      = 4
                technical_error       = 5.
    NOTE: it_zl-iftyp = 'A'   absence
          it_zl-iftyp = 'S'   at work
    INIT_TEXT     To load long text into SAP
    K_WERKS_OF_BUKRS_FIND     Return a list of all plants for a given company code.
    LIST_FROM_MEMORY     Retrieves the output of a report from memory when the report was executed using SUBMIT... EXPORTING LIST TO MEMORY. See also WRITE_LIST.
    LIST_TO_ASCII     convert an ABAP report (displayed on screen) from OTF to ASCII format
    MBEW_EXTEND
    Get the stock position for the previous month. This displays the same info that you see in MM03.
    MONTH_NAMES_GET     It returns all the month and names in repective language.
    MONTH_PLUS_DETERMINE     Add or subtract months from a date. To subtract a month, enter a negative value for the 'months' parameter.
    Example:
    data: new_date type d.
    CALL FUNCTION 'MONTH_PLUS_DETERMINE'
      EXPORTING
        months        = -5       " Negative to subtract from old date, positive to add
        olddate       = sy-datum
    IMPORTING
       NEWDATE       = new_date.
    write: / new_date.
    MS_EXCEL_OLE_STANDARD_OLE     will build a file, and automatically start Excel
    OTF_CONVERT     wraps several other function modules. Will convert OTF to ASCII or PDF
    POPUP_TO_CONFIRM_LOSS_OF_DATA     Create a dialog box in which you make a question whether the user wishes to perform a processing step with loss of data.
    POPUP_TO_CONFIRM_STEP     Create a dialog box in which you make a question whether the user wishes to perform the step.
    POPUP_TO_CONFIRM_WITH_MESSAGE     Create a dialog box in which you inform the user about a specific decision point during an action.
    POPUP_TO_CONFIRM_WITH_VALUE     Create a dialog box in which you make a question whether the user wishes to perform a processing step with a particular object.
    POPUP_TO_DECIDE     Provide user with several choices as radio buttons
    POPUP_TO_DECIDE_WITH_MESSAGE     Create a dialog box in which you inform the user about a specific decision point via a diagnosis text.
    POPUP_TO_DISPLAY_TEXT     Create a dialog box in which you display a two line message
    POPUP_TO_SELECT_MONTH     Popup to choose a month
    POPUP_WITH_TABLE_DISPLAY     Provide a display of a table for user to select one, with the value of the table line returned when selected.
    PRICING     Return pricing conditions in an internal table. Use structure TCOMK for parameter COMM_HEAD_1, and structure TCOMP for parameter COMM_ITEM_1, and set CALCULATION_TYPE to B. The pricing conditions will be returned in XOMV. You must fill TCOMP, and TCOMK with the appropriate values before callling the function in order for it to work.
    PROFILE_GET     Read an Entry in an INI File on the frontend
    PROFILE_SET     Write an Entry in an INI File on the frontend
    READ_TEXT     To load long text into SAP
    REGISTRY_GET     Read an Entry from the Registry
    REGISTRY_SET     Set an entry in the Registry
    RFC_ABAP_INSTALL_AND_RUN     Runs an ABAP program that is stored in the table PROGRAM when the MODE = 'F'. Table WRITES contains the ouput of the program. Allows you to run a program without having the source code in the target system.
    RH_GET_ACTIVE_WF_PLVAR     Return the active HR Plan
    RH_GET_DATE_DAYNAME     return the day based on the date provied
    RH_START_EXCEL_WITH_DATA     starts Excel with the contents of an internal table. This function finds Excel in the desktop registry. It also uses a local PC working directory to save the file (that's what the 'W' value for data path flag does). Very transparent to user!
    RH_STRUC_GET     Returns all related org info
    RHP0_POPUP_F4_SEARK
    is a matchcode for any type of HR Planning object, including the possibility to fill the field that you want
    Example:
    Examples: search for any organizational structure
               F4 = 'X'
               PLVAR = '01'
               OTYPE = 'O '
              search for any persons
               F4 = 'X'
               PLVAR = '01'
               OTYPE = 'P '
               MULTI_SELECT = 'X' to allow multiple selection
               EASY = 'X' for user-dependent matchcode
    Unfortunately, the use of table BASE_OBJIDS is disabled, so you can't specify
    a root for the hierarchy you display
    RKD_WORD_WRAP     Convert a long string or phrase into several lines.
    RP_CALC_DATE_IN_INTERVAL     Add/subtract years/months/days from a date
    RP_LAST_DAY_OF_MONTHS     Determine last day of month
    RPY_DYNPRO_READ     Read dynpro, including screen flow
    RPY_TRANSACTION_READ     Given a transaction, return the program and screen or given a program and screen, return the transactions that use the program and screen.
    RS_COVERPAGE_SELECTIONS     Returns an internal table that contains a formatted list of all the selection parameters entered for a report. Table is ready to print out.
    RS_REFRESH_FROM_SELECTOPTIONS     Get the current contents of selection screen
    RS_SEND_MAIL_FOR_SPOOLLIST     Send message from ABAP/4 program to SAPoffice.
    RS_VARIANT_CONTENTS     Returns the contents of the specified variant in a table.
    RSPO_DOWNLOAD_SPOOLJOB     Download the spool from a program to a file. Requires spool number.
    RSPO_RETURN_ABAP_SPOOLJOB     Fetch printer spool according to the spool number informed.
    RZL_READ_DIR     If the server name is left blank, it reads a directory from local presentation server, otherwise it reads the directory of the remote server
    RZL_READ_DIR_LOCAL     Read a directory on the Application Server
    RZL_READ_FILE     Read a file from the presentation server if no server name is given, or read file from remote server. Very useful to avoid authority checks that occur doing an OPEN DATASET. This function using a SAP C program to read the data.
    RZL_SLEEP     Hang the current application from 1 to 5 seconds.
    RZL_SUBMIT     Submit a remote report.
    RZL_WRITE_FILE_LOCAL     Saves table to the presentation server (not PC). Does not use OPEN DATASET, so it does not suffer from authority checks!
    SAP_CONVERT_TO_XLS_FORMAT     Convert data to Microsoft Excel format.
    SAPGUI_PROGRESS_INDICATOR     Display a progress bar on the SAP GUI, and give the user some idea of what is happening
    SAVE_TEXT     To load long text into SAP
    SCROLLING_IN_TABLE     If you are coding a module pool and using a table control, you can use this function SCROLLING_IN_TABLE to handle any scrolling. (provided by Paul Kjaer)
    SD_DATETIME_DIFFERENCE     Give the difference in Days and Time for 2 dates
    SO_NEW_DOCUMENT_ATT_SEND_API1     Send a document as part of an email. The documentation is better than normal for this function, so please read it.
    SO_SPLIT_FILE_AND_PATH     Split a fully pathed filename into a filename and a path.
    SO_SPOOL_READ     Fetch printer spool according to the spool number informed. See also RSPO_RETURN_ABAP_SPOOLJOB
    SO_WIND_SPOOL_LIST     Browse printer spool numbers according to user informed.
    SWD_HELP_F4_ORG_OBJECTS
    HR Matchcode tailored for organizational units. Includes a button so that you can browse the hierarchy too.
    SX_OBJECT_CONVERT_OTF_PDF     Conversion From OTF to PDF (SAPScript conversion)
    SX_OBJECT_CONVERT_OTF_PRT     Conversion From OTF to Printer Format (SAPScript conversion)
    SX_OBJECT_CONVERT_OTF_RAW     Conversion From OTF to ASCII (SAPScript conversion)
    SXPG_CALL_SYSTEM     you can check the user's authorization for the specified command and run the command. The command runs on the host system on which the function module is executed. The function module is RFC capable. It can therefore be run on the host system at which a user happens to be active or on another designated host system at which an R/3 server is active.
    SXPG_COMMAND_CHECK     Check whether the user is authorized to execute the specified command on the target host system with the specified arguments.
    SXPG_COMMAND_DEFINITION_GET     Read the definition of a single external OS command from the R/3 System's database.
    SXPG_COMMAND_EXECUTE     Check a user's authorization to use a command, as in SXPG_COMMAND_CHECK. If the authorization check is successful, then execute the command on the target host system.
    SXPG_COMMAND_LIST_GET     Select a list of external OS command definitions.
    TERMINAL_ID_GET     Return the terminal id
    TH_DELETE_USER     Logoff a user. Similar results to using SM04.
    TH_ENVIRONMENT     Get the UNIX environment
    TH_POPUP     Display a popup system message on a specific users screen.
    TH_REMOTE_TRANSACTION     Run a transaction on a remote server. Optionally provide BDC data to be used in the transaction
    TH_USER_INFO     Give information about the current user (sessions, workstation logged in from, etc)
    TH_USER_LIST     Show which users are logged into an app server
    TMP_GUI_DIRECTORY_LIST_FILES     Retrieve all of the files and subdirectories on the Presentation Server (PC) for a given directory.
    When a value other than * or . is used for the filter, you will not get any directories, unless they match your wildcard filter. For example, if you entered *.png, then only files and directories that end in png will be returned by the function.
    Example:
    data:  lc_directory         like bdschko16-target_dir value 'C:\TEMP\',
           lc_filter(20)        type c default '.'.
           li_file_count        type i,
           li_dir_count         type i,
           ltab_dir_table       like sdokpath occurs 0 with header line,
           ltab_file_file_table like sdokpath occurs 0 with header line.
    call function 'TMP_GUI_DIRECTORY_LIST_FILES'
      exporting
        directory        = lc_directory
        filter           = lc_filter  importing
        file_count       = li_file_count
        dir_count        = li_dir_count
      tables
        file_table       = ltab_file_table
        dir_table        = ltab_dir_table
      exceptions
        cntl_error       = 1
        others           = 2.
    UNIT_CONVERSION_SIMPLE     convert weights from one UOM to another.
    UPLOAD     upload a file to the presentation server (PC)
    UPLOAD_FILES     Will load one or more files from app or presentation server
    WEEK_GET_FIRST_DAY     For a given week (YYYYMM format), this function returns the date of the Monday of that week.
    WRITE_LIST     Useful for writing out the list contents that result from the function LIST_FROM_MEMORY.
    WS_DOWNLOAD     Save Internal Table as File on the Presentation Server
    WS_EXCEL     Start EXCEL on the PC
    WS_EXECUTE     execute a program on a windows PC
    WS_FILE_DELETE     Delete File at the Frontend
    WS_FILENAME_GET     Call File Selector
    WS_MSG     Create a dialog box in which you display an one line message
    WS_UPLOAD     Load Files from the Presentation Server to Internal ABAP Tables
    WS_VOLUME_GET     Get the label from a frontend device.
    WWW_LIST_TO_HTML     After running a report, call this function to convert the list output to HTML.
    hope it will help you.
    Regards,
    Sreelatha gullapalli

  • How to create the INBOUND Function Module for INBOUND IDOCs

    Hi Friends,
    Can any Suggest me How to proceed to Create an INBOUND Function Module for Processing the INBOUND IDOCS
    which are recieved from XI Server ?
    I am working in SAP-ISU
    Here i will recieve the INBOUND IDOCs for the Meter Reading Orders.
    We have a Standard INBOUND FUNCTION MODULE
    IDOC_INPUT_ISU_MR_UPLOAD
    which Uploads the Meter Reading Results.
    I copied the Same function Module into ZIDOC_INPUT_
    and working on it.
    Can any one suggest me, whether i am going in correct way or not.
    In IDOC_INPUT_ISU_MR_UPLOAD Inbound fun module,
    BAPI_MTRREADDOC_UPLOAD is used to Update or Insert the Meter Reading Results,
    My requirment is to Insert and Update the Meter Reading Orders which are Inbounded from XI.
    Can I Use the Same BAPI
    BAPI_MTRREADDOC_UPLOAD
    to Update the below fields,
    EABL-SERNR
    EABL-ZWNUMMER
    EABLG-ABLESGR
    EABL-V_ZWSTAND
    EABL-N_ZWSTAND
    EABL-ABLHINW
    EABL-ZSKIPC
    EABL-ADAT
    EABL-ATIMTATS
    EABL-ADATTATS
    EABL-ATIM
    EABL-ZMESSAGE
    EABL-ABLESER(Meter reader number)
    Kindly Suggest me,
    Thanks in Advance,
    Ganesh

    Hello Ganesh
    I think you are going completely astray with you z-function module for IDoc processing.
    If you look at TABLES parameter METERREADINGRESULTS (type BAPIEABLU ) of BAPI_MTRREADDOC_UPLOAD you will find many of the requested fields already:
    EABL-SERNR => BAPIEABLU-SERIALNO
    EABL-ZWNUMMER =>REGISTER
    EABLG-ABLESGR
    EABL-V_ZWSTAND
    EABL-N_ZWSTAND
    EABL-ABLHINW
    EABL-ZSKIPC
    EABL-ADAT
    EABL-ATIMTATS => ACTUALMRTIME
    EABL-ADATTATS => ACTUALMRDATE
    EABL-ATIM
    EABL-ZMESSAGE
    EABL-ABLESER(Meter reader number)
    Field EABL-ZMESSAGE appears to be custom field (at least I cannot find it on ECC 6.0). If this field was added using include CI_EABL then you probably can get these values into the BAPI using the EXTENSIONIN parameter.
    Check routine CHECK_UPLOADRECORDS in the BAPI which allows two extension structures:
    - BAPI_TE_EABL
    - BAPI_TE_EOSB
    Not surprisingly BAPI_TE_EABL contains the include CI_EABL.
    Regards
      Uwe

  • Function module for posting idoc

    Hi,
    For Inbound Idoc
    In function module for posting the Idoc what should be given as the return_variable.

    Hi,
    it depends on application.i have written some piece of code for my requiremnt.chek it,may be it will help u.
    FORM idoc_status_ord_change
         TABLES idoc_data    STRUCTURE  edidd
                idoc_status  STRUCTURE  bdidocstat
                r_variables  STRUCTURE  bdwfretvar
          USING idoc_contrl  LIKE  edidc
                value(retn_info) LIKE   bapiret2
                status       LIKE  bdidocstat-status
                wf_result    LIKE  bdwf_param-result.
      CLEAR idoc_status.
      idoc_status-docnum   = idoc_contrl-docnum.
      idoc_status-msgty    = retn_info-type.
      idoc_status-msgid    = retn_info-id.
      idoc_status-msgno    = retn_info-number.
      idoc_status-appl_log = retn_info-log_no.
      idoc_status-msgv1    = retn_info-message_v1.
      idoc_status-msgv2    = retn_info-message_v2.
      idoc_status-msgv3    = retn_info-message_v3.
      idoc_status-msgv4    = retn_info-message_v4.
      idoc_status-repid    = sy-repid.
      idoc_status-status   = status.
      APPEND idoc_status.
      IF idoc_status-status = '51'.
        wf_result = '99999'.
        r_variables-wf_param   = 'Error_IDOCs'.
        r_variables-doc_number = idoc_contrl-docnum.
        READ TABLE r_variables FROM r_variables.
        IF sy-subrc <> 0.
          APPEND r_variables.
        ENDIF.
      ELSEIF idoc_status-status = '53'.
        CLEAR wf_result.
        r_variables-wf_param = 'Processed_IDOCs'.
        r_variables-doc_number = idoc_contrl-docnum.
        READ TABLE r_variables FROM r_variables.
        IF sy-subrc <> 0.
          APPEND r_variables.
        ENDIF.
      ENDIF.
    regards,
    nagaraj

Maybe you are looking for