Function module for reteriving Purchase order values

hi,
I there any function module for reteriving the Purchase order Values

better to put ur logic /requirement on table EKKOEKPOEKBE.
Regards
Prabhu

Similar Messages

Function Module for open Purchase Order & Sales Order?

Hi, commonly I read the data from tables and calculate the open quantity for sales order and purchase order, but I want to know, are there any standard function modules for getting the list of open "purchase order" and "sales order" respectively?
Thanks and Regards.

hi Ren,
u can check all these bapi's related to salesorder
BAPI_SALESORDER_CHANGE Sales order: Change Sales Order
BAPI_SALESORDER_CONFIRMDELVRY Sales Order: Confirmation of Delivery; Document Flow Update
BAPI_SALESORDER_CREATEFROMDAT1 Sales order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDAT2 Sales order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDATA Create Sales Order, No More Maintenance
BAPI_SALESORDER_GETLIST Sales order: List of all Orders for Customer
BAPI_SALESORDER_GETSTATUS Sales Order: Display Status
BAPI_SALESORDER_SIMULATE Sales Order: Simulate Sales Order
May be this FM can help you
MB_ADD_PURCHASE_ORDER_QUANTITY (Reading and adding open purchase order quantities)
Regards,
Naveen

Function module for open sales order and open PO

hi all,
can anyone please tell me that is there any function module to get open sale order and also for open purchase order?
regards saurabh.

Hi ,
In EKPO Table u select this fields Purchase Document no and Item no of Purchsing Document , Material no , and Purchase Order Qty.
In MSEG Table u select this fields Purchase Document no and Item no of Purchsing Document , Material no , and Qty.
Both Tables having Purchase Document no , So Purchase Doucment no throguh u will get the Material and qty , Finally u Subract the both Material Qty's .
u will get the Open Po For particular Material.
If ur not getting ,Inform me .
Regards ,
Shankar GJ

Function module for finding sales order GT total value(vbak-netwr)

Can anyone tell which function module is used to find the Sales order greater than the input parameter which is total value(vbak-netwr).Output should be the details of sales order satisfying the condition.ie greater than the total value.

Hi chandra
I hope you are giving the logic to the ABAP'ers . By giving the input and the outputs. So here , VBAK-NETWR are related to functional consultants .
Based on the requirement , SD,FI etc the give the logic but mostly it is related to SD consultants only
Reagrds
Srinath

BAPI/Function Module for posting internal order + cost center plan

Hi Guru:
Is there any function module/BAPI, which could be used to post internal order + cost center( both of them )plan data?
Like post a record:
internal order = 10000
cost center = C1000
amount = 1000$
for plann version 30?
It seems the BAPI could only contain 1 cost object, either cost center or internal order.
Thanks.
Eric

Hi again,
I think you may have missed something important here. In R/3 there can only be a single "real" cost object for any one posting. If not then the whole SAP financail model would collapse as there would be "double postings" and that is certainly not wanted.
If there is a need to post to two cost objects, like in your case, then one of the cost objects MUST be statistical.
In your scenario SAP has thought of a solution that might be of help for you. An internal order can be set to be statistical in master data. When posting to both the cost center and the internal order then you will get a real posting for the CC and a statisitical posting for the IO. Reporting does work with this as per your requirement.
Hope this gives you some hints for how to proceed.
Regards, Johan
Aaaaah. Noted that this was only plan data. Sorry. But the same still applies for plan data postings as well as for actual data postings. If there should be just one posting that could be "drilled down" from IO to CC -> If you post twice then, when doing "Grand total" for instance, double values would appear. So, still IO should be statistical. //Johan
Message was edited by: Johan von Reedtz

Function module for Open Sales Orders.

Can u any one tell me is there any standard function module to
retrieve OPEN-SALES orders. I tried to debug VA05 but not of use...
Thanks in advance,
Sanjay.

hi
you can get open sales orders from vbuk and vbup
    SELECT
         A~VBELN
         A~GBSTK
         B~GBSTA FROM VBUK AS A
         INNER JOIN VBUP AS B
         ON AVBELN = BVBELN INTO TABLE T_OPENS
         FOR ALL ENTRIES IN T_VBELN WHERE A~VBELN = T_VBELN-VBELN
        AND A~GBSTK IN ('A','B')
         AND B~GBSTA IN ('A','B').
in t_vebeln table is haveing sales orders by user selection you can get it like this
regards,
varma

Function module for display production order details

Hi All,
I want to display production order details including operation,sub-operations and components using standard FM.I checked 4 FMs, but some are not displaying my require details. I found PM_ORDER_DATA_READ function module, it is displaying all details.But you can execute the function module 2 times for different orders it is giving ABAP dump 'itab_error'. Please get back to me if any one faced this problem or know solution.I am also checked BAPI_ALM_ORDER_GETDETAIL FM.
My require fields are
AUFNR, WERKS, PLNAL, PLNFL, VORNR,UVORN, ARBPL, KTSCH,
LTXA1,OFFSTB,VGW01 etc.
I am using SAP 4.7 release. Please send me either standard FM or BAPI to display all details of production order.
Thanks in Advance
Shaik Basha

Hi,
I had the same problem this morning and I found out a FM you have to run to fix this problem.
FM: CO_IT_SET_FLG_ITAB_NEW
Rgds,
Parise

IDoc outbound function module to generate Purchase order PORDCH IDoc

Hi all,
Can anyone help me with the outbound function module to generate PORDCH IDoc

instead of that you can use the Below For PO's.
Message Type : ORDCHG
Process Code : ME11
Function : IDOC_OUTPUT_ORDCHG

Urjent-Any function module for finding Sales order, Delivery and Invoic

Hi Experts,
I am having selection screen like
Sales order
Delivery
Invoice
Customer
If i give sales order
         Delivery and Invoice should pull
If i give delivery
         sales order and Invoice should pull
If i give Invoice
         sales order and delivery should pull
If i give customer
           all customer related data should pull
Do we have any function modules to meet this reqirement?
If we have please provide function modules.
Thanks,
mahe
Edited by: Rob Burbank on Mar 30, 2009 4:17 PM
Edited by: mahahe on Mar 31, 2009 9:12 PM

You can use VBFA table, right? in the FM also, you can find the same logic, like pulling from VBFA table.
thanq

Function module for changing Work order user status in IW32

Hi,
I want to change the work order user status in IW32 using ABAP.
Is there any function module to do so or any other way? I have tried using BDC but this does not work.
Please suggest.
Regards,
Naba
Edited by: n. saha on Nov 5, 2008 6:46 AM

I am getting Same Problem.
fi_methods-method = 'SAVE'.
APPEND fi_methods.
fi_methods-refnumber = 1.
fi_methods-objecttype = 'USERSTATUS'.
fi_methods-method = 'CHANGE'.
fi_methods-objectkey = '002000002453'.
APPEND fi_methods.
fi_userstatus-user_st_text = 'COMM'.
fi_userstatus-user_langu   = 'EN'.
fi_userstatus-CHANGE_EVENT = ' 01 '.
APPEND fi_userstatus.
CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
TABLES
    it_methods    = fi_methods
    it_userstatus = fi_userstatus
    return        = fi_return.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
Above code I am using and there the message comes like
T ID                   NUM           MESSAGE
S IW                   080           Order saved with number 2000002453
S IWO_BAPI2     110           BAPI control was ended
can any on know what is wrong in this? please help if having knowledge.
Thank You,
Jahnavee Trivedi

Function module for Create service order with reference to sales doc (RAS )

Hi All,
I have to create a service order (type SM03) with reference to sales document (doc type RAS, in other way it is called as repair order).
I have used function module 'ALM_ME_ORDER_CREATE' && 'CO_ZV_ORDER_POST' to create service order and its working fine but problem is that i am not able to create linking between repair order and service order.
Can anyone suggest me function module, BAPI to create service order with reference as sales document (RAS) so that all related details of sales document will automatically reflect to service order..
Sumit

Try this function module BAPI_ORDER_MAINTAIN. Just search with BAPI_ORDER* in SE37 you will get some more functions.
Regards
Kathirvel

BAPI or Function Module for T71ADM23 (Compensation Matrix Values)

Hi Experts,
Is there any BAPI or FMs that could update the table T71ADM23 (Compensation Matrix Values)?.. The current process to update the table is done via SM30, table maintenance..
Thanks!

hey,
There is no BAPI for EA13-print reversal.
Regards
Suresh.d

Function Modul for Order Number from VA02

Hallo
i have a delivery number and want read the order number from VA02.
Of course, select the database from LIKP --> LIPS --> VBKD is possible but
maybe it has function modul for read the order number from transaction VA02.
THX ANU

Hi,
I think is better recover the data directly from DB tables (in table LIPS you have the fields VGBEL, VGPOS, VGTYP ) if you only want the order number.
With the delivery number you only need to acces 1 table. If you use a FM, you will recover this data and a few fields that is not interesting for you. The access to table LIPS is using table index (delivery number)
Regards,
Pepe

KEY FIGURE: Effective purchase order value & K.F "No. of Purch.Orders"

Yo my fellow Gurus,
Got a problem, when executing listcube on the Info-Cube 0PUR_C01 - I see the data/amounts in the column for "Effective purchase order value" / 0ORDER_VAL. But when running the query with the Key Figure I just get "0"
I tried the option of adding the Process Keys not allocated in the Routine list of keys, yet still nothing has popped in the query, and heres the routine after additonal keys added:
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: ...
INCLUDE RS_BCT_MM_UPDATE_RULES.
$$ end of global - insert your declaration only before this line   -
FORM compute_data_field
TABLES   MONITOR STRUCTURE RSMONITOR "user defined monitoring
USING    COMM_STRUCTURE LIKE /BIC/CS2LIS_02_SCL
           RECORD_NO LIKE SY-TABIX
           RECORD_ALL LIKE SY-TABIX
           SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING RESULT LIKE /BI0/V0PUR_C04T-ORDER_VAL
           RETURNCODE LIKE SY-SUBRC
           ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line        -
fill the internal table "MONITOR", to make monitor entries
IF ( COMM_STRUCTURE-PROCESSKEY = '001' or     "Bestellung
    COMM_STRUCTURE-PROCESSKEY = '011' or
*change of keys
    COMM_STRUCTURE-PROCESSKEY = '015' or
    COMM_STRUCTURE-PROCESSKEY = '005' or
    COMM_STRUCTURE-PROCESSKEY = '025' or
    COMM_STRUCTURE-PROCESSKEY = '041' or
    COMM_STRUCTURE-PROCESSKEY = '051' or
    COMM_STRUCTURE-PROCESSKEY = '061' or
*change of keys
    COMM_STRUCTURE-PROCESSKEY = '021' or
    COMM_STRUCTURE-PROCESSKEY = '004' or       "LP
    COMM_STRUCTURE-PROCESSKEY = '014' or
    COMM_STRUCTURE-PROCESSKEY = '024' )
    AND COMM_STRUCTURE-BWAPPLNM EQ 'MM'
    AND COMM_STRUCTURE-ORDER_VAL <> 0.
    perFORM LOC_CURR_CONVERT
           USING    COMM_STRUCTURE-ORDER_VAL
                    COMM_STRUCTURE-DOC_DATE
                    COMM_STRUCTURE-ORDER_CURR
                    COMM_STRUCTURE-LOC_CURRCY
                    COMM_STRUCTURE-EXCHG_RATE
           CHANGING RESULT.
if the returncode is not equal zero, the result will not be updated
    RETURNCODE = 0.
else.
    RETURNCODE = 4.
endif.
if abort is not equal zero, the update process will be canceled
This seems to be also the issue with my other Key Figure "No. of Purch. Orders" except here it the just comes up blank / 0 . This is to some the number of pos per plant for the month. So it's not storing anything but running via an interface and then with the aid of the routine loading the count into the cube:
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: ...
DATA:   ...
$$ end of global - insert your declaration only before this line   -
FORM compute_data_field
TABLES   MONITOR STRUCTURE RSMONITOR "user defined monitoring
USING    COMM_STRUCTURE LIKE /BIC/CS2LIS_02_HDR
           RECORD_NO LIKE SY-TABIX
           RECORD_ALL LIKE SY-TABIX
           SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING RESULT LIKE /BI0/V0PUR_C04T-NO_PUR_ORD
           RETURNCODE LIKE SY-SUBRC
           ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line        -
fill the internal table "MONITOR", to make monitor entries
if COMM_STRUCTURE-HDRPROCESS = '01'         "Bestellung
     AND COMM_STRUCTURE-no_hdr <> 0.
result value of the routine
    RESULT = COMM_STRUCTURE-no_hdr.
if the returncode is not equal zero, the result will not be updated
    RETURNCODE = 0.
else.
    RETURNCODE = 4.
endif.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line         -
ENDFORM.
Please advise the way forward.
Thanks,
Ishaam

what do u want?

Is there any function module for purchase order change

Hi Experts,
Is there any function module for purchase order change or i need to do new recording in me22n.
Thanks,
Senthil

Hi
Function module <b>BAPI_PO_CHANGE</b> enables you to change purchase orders. The Change method uses the technology behind transaction ME22N.
Regards,
Viven

Function module for reteriving Purchase order values

Similar Messages

Maybe you are looking for