Function Module for Revision Level.
Hi all,
Is there any function module to retrieve details of MM and PO Revision Level..
In MM it is present in basic View..in AEOI table..,but i still go for function module.
Thanx in advance
Hi,
BAPI_PO_DETAIL1
REVISION_LEVEL_SELECT
CCAP_REV_LEVEL_MAINTAIN
Also,
1.You can see this revision changes history in the version tab itself.
2.You can also get from PO - Environment - Header changes details.
3.Check the table EREV Version in Purchasing in SE16. This will give all the required details for the PO.
4.You can fetch the data from this table to appear in the PO print out.
If you want to know the material revision level as of some date then you can use function module REVISION_LEVEL_SELECT. Pass material & date and it will tell you the active revision on that date.
If you want to know the table, then AEOI where you can enter the material no in field OBJKT & AETYP as 41 (Material). You will get the list of revision levels for the material.
thanks & regards,
ShreeMohan
Similar Messages
-
Function Module For Item Level Details of a Sales Order
Hi Guys,
I have to get the item level details for a particular sales document no ..I want to know if there is any function module existing for the same.
Also I need any function module for getting the contact information such as contact form (KNVK-ANRED),contact name(KNVK-NAM1),contact name(KNVK-NAMEV),Contact number (KNVK-TELF1).
Please let me know if anyone is aware of it.
Thanks in Advance,
Mayank<b>SD_SALES_DOCUMENT_READ</b> Reads sales document header and business data: tables VBAK, VBKD and VBPA (Sold-to (AG), Payer (RG) and Ship-to (WE) parties)
<b>SD_SALES_DOCUMENT_READ_POS</b> Reads sales document header and item material: tables VBAK, VBAP-MATNR
<b>SD_DOCUMENT_PARTNER_READ</b> partner information including address. Calls SD_PARTNER_READ
<b>SD_PARTNER_READ</b> all the partners information and addresses
<b>SD_DETERMINE_CONTRACT_TYPE</b>
In: at least VBAK-VBELN
Exceptions: NO CONTRACT | SERVICE_CONTRACT | QUANTITY_CONTRACT
<b>SD_SALES_DOCUMENT_COPY</b>
<b>RV_ORDER_FLOW_INFORMATION</b> Reads sales document flow of sales document after delivery and billing
SD_SALES_DOCUMENT_SAVE create Sales Doc from the copied document
SD_SALES_DOCUMENT_ENQUEUE to dequeue use DEQUEUE_EVVBAKE
RV_DELIVERY_PRINT_VIEW Data provision for delivery note printing
SD_PACKING_PRINT_VIEW
SD_DELIVERY_VIEW Data collection for printing
called from RV_DELIVERY_PRINT_VIEW, SD_PACKING_PRINT_VIEW
RV_BILLING_PRINT_VIEW Data Provision for Billing Document Print
regards
vinod -
Bom explosion function module for bypassing phantom materials
hi,
function module "cS_BOM_EXPL_MAT_V2" is used to explode the componensts of first level only.
In my case there are components at first level are phantom assemblies so i want to drill down further to arrive at E or F part which may be at 2nd or 3rd level.
please suggest any BAPI or function module for the above requirement.
Thanks.
KumarDear Kumar,
check with following input values for the Functional Module
FTREL
ALEKZ
ALTVO
AUFSW
AUMGB
AUMNG 0.000
AUSKZ
AMIND
BAGRP
BEIKZ
BESSL
BGIXO
BREMS
CAPID PP01
CHLST
COSPR
CUOBJ 000000000000000000
CUOVS
CUOLS
DATUV 13.05.2008
DELNL
DRLDT
EHNDL
EMENG 2.000
ERSKZ
ERSSL
FBSTP
KNFBA
KSBVO
MBWLS X
MKTLS X
MDMPS
MEHRS X
MKMAT
MMAPS
SALWW
SPLWW
MMORY 1
MTNRV S7690339
NLINK
POSTP
RNDKZ
RVREL
SANFR
SANIN
SANKA
SANKO
SANVS
SCHGT
STKKZ
STLAL 1
STLAN 1
STPST 0
SVWVO X
WERKS 5501
NORVL
MDNOT
PANOT
QVERW
VERID
VRSVO X
I'm using this FM with the above input parameters and I'm getting the necessary details perfectly.
Please check & revert back.
Regards
Mangalraj.S -
Function module for customer debit note/credit note
Hi
Can you please tell us the function module for the following:
1. Customer debit note
2. Customer credit note
Also, we would like to have function module for extracting GL balances at business area/profit center level.
Regards
S.RadhakrishnanHi
We are looking for function module for posting FI Invoice/credit memo using FB70/FB75.
Also, we need function module for extracting GL balances at business area/profit center level.
Regards
S.Radhakrishnan -
Function Module for Dollar Amount
Hi All,
I have a requirement where a REFX contract once created has to go through a series of approvals. How do I get the dollar amount on the contract so that it can be routed to the proper level for approval? Is there a function module for this?
Thanks a lot in advance.Hi Amlan,
For the condition (amount) on contract you can get using..
BAPI_RE_CN_GET_DETAIL or
API_RE_CN_GET_DETAIL
And if you doing currency conversion there are lot of FM.
Thanks
Veman -
Function module for Change document for Business partner
Hi Experts,
Could any one send me the sample code of function module for CDHDR and CDPOS tables for extracting the change date along with role.
Eg :
BPRole Changd on crtd by crtd on Business partner
ZCASH 30.11.2011 NHALLAL 24.11.2011 0001000237
CRM000 03.12.2011 NHALLAL 24.11.2011 0001000237
I wanted to catch up the changed date and changed role from CDHDR (base table) and CDPOS(cluster table - item level).
Might be involved with creation of extract structure.
Any sample codes are appreciated. Thanks.
Regards,
Janardhanresolved
-
Function module for submitting order in CRM B2B
Hi Experts,
we are customizing the CRM B2B functionality. as per our reqruirement, we have 3 types of orders (docuemnts) to submit. for each order we have differnt extra fields data need to be sent to the back end system in the Header level and item level.
In this case still we can not use the standard function module to submit the document.
need to use the same standard functiona module or need to create the z function module for submitting all three orders.
Please advice.
I have another question. What the standard functiona module name for submitting the order?
Adavance ThanksHI
We need not create any custom FM to send in extension data. Just extend the class which is called on save and overirde the
customer exits available there.
From the sales document object get header and itemlist.
ItemList itemsData = salesDocument.getItems();
HeaderData header = salesDocument.getHeaderData();
header.addExtensionData();
ItemSalesDoc[] items = itemsData.toArray();
for (int k = 0; k < items.length; k++) {
ItemSalesDoc item = new ItemSalesDoc();
item = items[k];
item.addExtensionData();
The header and item extension datas will be available in the respective place holders in the methods in BADI
CRM_ISA_BASKET_ITEMS CHANGEITEMS_BEFORE_ORDER IT_EXTENSION
CRM_ISA_BASKET_HEAD CHANGEHEAD_BEFORE_IL IT_EXTENSION
The method name and place holder in backend also given above.
Hope this helps
Regards
Antony -
Functional module for automatic creation of pur requisition & pur order
hello,
what is the functional module for automatic creation of puchase requisition and automatic creation of purchase order which we will assign in action box in service order processing management.
please let me know as early as possible
regards,
rajesh kumar rajuHi,
Please check with following.
IDOC_INPUT_ACC_PURCHASE_REQUI
IDOC_INPUT_ACC_PURCHASE_ORDER
/ISDFPS/OR_PURCHASE_ORDER_CR
BS01_PURCHASE_DOCUMENT_CREATE
CO_MP_CREATE_PURCHASE_ORDER
Thanks & Regards
Sadhu Kishore -
Function module for calculating planned and actual cost of production order
Hi ,
Do we have any standard function module for calculating planned and actual cost for production order?
i need to implement this in a Z-report.
Thanks
SriniHi,
try below function module
CRMCO_GET_PLAN_ACTUAL_COSTS
CO_IH_GET_PLANNED_COSTS_TOTAL
Regards,
Sankaran -
How to create the INBOUND Function Module for INBOUND IDOCs
Hi Friends,
Can any Suggest me How to proceed to Create an INBOUND Function Module for Processing the INBOUND IDOCS
which are recieved from XI Server ?
I am working in SAP-ISU
Here i will recieve the INBOUND IDOCs for the Meter Reading Orders.
We have a Standard INBOUND FUNCTION MODULE
IDOC_INPUT_ISU_MR_UPLOAD
which Uploads the Meter Reading Results.
I copied the Same function Module into ZIDOC_INPUT_
and working on it.
Can any one suggest me, whether i am going in correct way or not.
In IDOC_INPUT_ISU_MR_UPLOAD Inbound fun module,
BAPI_MTRREADDOC_UPLOAD is used to Update or Insert the Meter Reading Results,
My requirment is to Insert and Update the Meter Reading Orders which are Inbounded from XI.
Can I Use the Same BAPI
BAPI_MTRREADDOC_UPLOAD
to Update the below fields,
EABL-SERNR
EABL-ZWNUMMER
EABLG-ABLESGR
EABL-V_ZWSTAND
EABL-N_ZWSTAND
EABL-ABLHINW
EABL-ZSKIPC
EABL-ADAT
EABL-ATIMTATS
EABL-ADATTATS
EABL-ATIM
EABL-ZMESSAGE
EABL-ABLESER(Meter reader number)
Kindly Suggest me,
Thanks in Advance,
GaneshHello Ganesh
I think you are going completely astray with you z-function module for IDoc processing.
If you look at TABLES parameter METERREADINGRESULTS (type BAPIEABLU ) of BAPI_MTRREADDOC_UPLOAD you will find many of the requested fields already:
EABL-SERNR => BAPIEABLU-SERIALNO
EABL-ZWNUMMER =>REGISTER
EABLG-ABLESGR
EABL-V_ZWSTAND
EABL-N_ZWSTAND
EABL-ABLHINW
EABL-ZSKIPC
EABL-ADAT
EABL-ATIMTATS => ACTUALMRTIME
EABL-ADATTATS => ACTUALMRDATE
EABL-ATIM
EABL-ZMESSAGE
EABL-ABLESER(Meter reader number)
Field EABL-ZMESSAGE appears to be custom field (at least I cannot find it on ECC 6.0). If this field was added using include CI_EABL then you probably can get these values into the BAPI using the EXTENSIONIN parameter.
Check routine CHECK_UPLOADRECORDS in the BAPI which allows two extension structures:
- BAPI_TE_EABL
- BAPI_TE_EOSB
Not surprisingly BAPI_TE_EABL contains the include CI_EABL.
Regards
Uwe -
How to config Check Digits function module for Student Number Validation
Hi SLCM Experts,
In the SAP-SLCM, How to use check digits function module for validate student number. Just only config it or need to customizing program.
*Any idea to student number validation in SLCM?*
Best Regards,
Suvatchai K.Hi ,
Can you expalin it further ?
You configure the St. no in piq_matr . And set it as external or internal no. range which suits your business .
What is the validation you are looking for ?
Regards
Gajalakshmi -
Function Module for FB01 Vendor line items postings in 3.1 Version
Hello all,
Is there any Function Module for FB01 Vendor line items postings in 3.1 Version. I do not want to go for BDC. Please suggest.
Thanks,
SubbaHi,
search for function module ACCPOSTING* or get development class of transaction FB01 and goto SE80, enter development class - and search in function group's function module.
Cheers.
...Reward if useful. -
Function Modules for uploading the file
Hi experts ,
I have a requirement to download a file (csv) from my local sytem (say desktop) into an internal table first and then update the contents of the same internal table into the database table.
Can anybody provide me with a sample program for doing the same or at least the name of function modules for the same.
Prompt replies will be rewarded.
TIA
AbhishekHi Abhishek,
How to use INSERT Statement..
Check this Sample Program..
TABLES:MARA.
DATA:ITAB LIKE MARA OCCURS 0 WITH HEADER LINE.
START-OF-SELECTION.
ITAB-MATNR = '123ABCDA'. .
ITAB-MBRSH = 'C'.
ITAB-MTART = 'FERT' .
ITAB-MEINS = 'KG' .
APPEND ITAB.
ITAB-MATNR = '123ABCDB'. .
ITAB-MBRSH = 'C'.
ITAB-MTART = 'FERT' .
ITAB-MEINS = 'KG' .
APPEND ITAB.
LOOP AT ITAB.
INSERT MARA FROM ITAB.
MODIFY MARA .
ENDLOOP. -
Function modules for the following
Hi,
I want to know the function modules for the following purposes.
1) Check whether a date is valid or not
2) Calculate the no of days between two dates.
Expecting an early response.
Thanks n Regards,
AmitHi,
PARAMETERS: p_list LIKE t009b-bumon AS LISTBOX
VISIBLE LENGTH 11 OBLIGATORY ,
p_list1 LIKE t009b-bdatj OBLIGATORY.
SELECTION-SCREEN POSITION POS_HIGH.
PARAMETERS: p_list2 LIKE t009b-bumon AS LISTBOX
VISIBLE LENGTH 11 OBLIGATORY,
p_list3 LIKE t009b-bdatj OBLIGATORY.
Calling Function Module for calculating no of days between the
selected period
CALL FUNCTION 'NUMBER_OF_DAYS_PER_MONTH_GET'
EXPORTING
par_month = p_list
par_year = p_list1
IMPORTING
par_days = ws_n_days.
CALL FUNCTION 'NUMBER_OF_DAYS_PER_MONTH_GET'
EXPORTING
par_month = p_list2
par_year = p_list3
IMPORTING
par_days = ws_n_days1.
For Concatenating the month and year into the date format
CONCATENATE p_list1 p_list ws_i INTO ws_c_date1.
CONCATENATE p_list3 p_list2 ws_n_days1 INTO ws_c_date2.
date = ws_c_date1 - ws_c_date2.
In the above sample code the selection screen has month and year as input.
Also check this link
http://www.sapdevelopment.co.uk/tips/date/datehome.htm
Check FM
<b>RP_CALC_DATE_IN_INTERVAL</b> Add/subtract years/months/days from a date
<b>SD_DATETIME_DIFFERENCE</b> Give the difference in Days and Time for 2 dates
<b>Also for checking valid date:</b>
U can specify the date field as
Select-options: s_date like likp-date(similar to ur requirement)
This itself ceck for the valid date no seperate validation needed.
Thanks & Regards,
Judith. -
Function Modules for Data and Time
Hi all,
I need 2 function modules for date and time. when we pass current data(sy-datum) and current time (sy-uzeit) into function modules, shoud get date in <b>dd/mm/yyyy or dd.mm.yyyy</b> and time in<b> HH:MM:SS</b> formats.
Thanks in advanceHi Ranjith,
i think this will b usefull for you..
SAP Bar Chart Function Modules and what they are used for
Function module
Used for
BARC_GRAPHIC_PBO
Starting bar chart at PBO time, using a graphic profile (parameter PROFILE)
BARC_GRAPHIC_PAI
Analyzing data returned by the graphic
BARC_SET_TIME_AXIS
Setting start and end of time axis
BARC_SET_OPTIONS
Setting options
BARC_ADD_CHART
Creating a chart
BARC_SET_CHART_ATTRIB
Setting chart attributes
BARC_ADD_SECTION
Creating a section on the time axis
BARC_SET_SECTION_ATTRIB
Setting section attributes
BARC_ADD_RIBBON
Adding a ribbon to the time axis
BARC_SET_RIBBON_ATTRIB
Setting attributes for ribbons in the chart
BARC_ADD_GRID
Adding a time grid
BARC_SET_GRID_ATTRIB
Setting grid attributes
BARC_ADD_LAYER
Adding a layer (graphic elements)
BARC_SET_LAYER_ATTRIB
Setting layer attributes
BARC_ADD_LINE
Adding a line
BARC_ADD_CALENDAR
Creating a calendar
BARC_SET_CALENDAR_ATTRIB
Setting attributes for a calendar
BARC_ADD_TIME_PROFILE
Creating time profiles
BARC_SET_TIME_PROFILE_ATTRIB
Setting attributes for time profile
BARC_ADD_INTERVAL
Adding a time interval
BARC_SET_INTERVAL_ATTRIB
Setting time interval attributes
BARC_ADD_TIME_OBJECT
Creating a time object
BARC_CONVERT_DATE
Creating a date string in bar chart format
BARC_REVERT_DATE
Converting a date string in bar chart format to date and time
BARC_ADD_DATELINE
Creating a date line
BARC_SET_DATELINE_ATTRIB
Setting dateline attributes
BARC_GET_PROFILE_CONTENTS
Obtaining profile contents for customizing a chart
BARC_GET_COLUMN_WIDTH
Selecting new column width
BARC_SET_COLUMN_WIDTH
Setting the column width
BARC_GET_TEXTINDEX
Obtaining the text index of a field
BARC_SET_LABELS
Positioning the chart display
BARC_SET_COLUMN_ATTRIB
Setting column attributes
BARC_SET_ROW_ATTRIB
Setting row attributes
BARC_SET_ROW_HEIGHT
Setting the line height
BARC_SET_MAXCHARTS
Setting the maximum number of charts sent
<b>If its usefull reward points
</b>
Maybe you are looking for
-
Connect macbook to a sony trinitron
i would like to connect my 2008 macbook to my sony trinitron model kv24fs120 (has white, red & white and s video) and use this tv as monitor. how can i do this? thank you
-
Which Palm do I have? And how do I disconnect it from its cradle?
Just bought an older palm that seems in perfect working condition from the local reuse center. Seems in perfect operating order. But there's no identifing marks as to which model it is. If it helps, the serial number is 10JG14017Y5M-O. Next problem
-
Transferring data from MS SQL Server to Oracle through Oracle's Stroed Procedure
Hi, I need to access 3 tables of MS SQL Server database through oracle's Stroed procedure. Is It possible? if yes how to do? is there any way of accomplishing this?
-
Transfer posting between plants
hi, i tried to make a transfer posting between plants(301), we have WM in From-plant (1010), but we don't have WM also serial numbers in Dest - plant (1013). so how can i make this. Now,in material master data for 1010- i assign serial number profi
-
When I import files, using an Aperture counter, it seems I only have two options. Pickup numbering where it left off, or reset back to 1. Is that true? I'd like to be able to add images to an existing Project using the same name and pick up where the