Function module for Ship to details

Hi,
I am new to SRM and we are implementing SRM 4.0.
How do I get the SHIP TO - floor, building name, room number, etc if I pass the PO GUID or PO number? Is there any function module for the same?
Thanks and regards,
Mick

Thanks Yann.
But the table CRMD_PARTNER does not contain the floor, room no, etc of the ship to party. In BBP_PD i think it is maintained in ADDR3_DATA.
But in the report that I am developing how do I map ADDR3_DATA with the PO GUID or PO number? Is there any function module that can give me the Ship to address including floor, room no, etc, if I pass the PO GUID or the PO number?
Regards,
Mick

Similar Messages

  • Any Function Module For getting Shipment Details

    Hi All,
    I want to get all details of shipment. i tired , but unable to get any function? I was able to find the creation or change shipment function modules, but not able to find the function module for getting the details for Shipment.
    like BAPI_SHIPMENT_CHANGE           Change Shipment
    BAPI_SHIPMENT_CREATE           Create Shipment
    similary
    Do you have any idea for getting (display)the details of Shipments?
    Regards,
    Raju

    hi,
    you can use
    VTTP,VTTK
    or
    RV_SHIPMENT_READ

  • Function Module For Item Level Details of a Sales Order

    Hi Guys,
    I have to get the item level details for a particular sales document no ..I want to know if there is any function module existing for the same.
    Also I need any function module for getting the contact information such as contact form (KNVK-ANRED),contact name(KNVK-NAM1),contact name(KNVK-NAMEV),Contact number (KNVK-TELF1).
    Please let me know if anyone is aware of it.
    Thanks in Advance,
    Mayank

    <b>SD_SALES_DOCUMENT_READ</b> Reads sales document header and business data: tables VBAK, VBKD and VBPA (Sold-to (AG), Payer (RG) and Ship-to (WE) parties)
    <b>SD_SALES_DOCUMENT_READ_POS</b> Reads sales document header and item material: tables VBAK, VBAP-MATNR
    <b>SD_DOCUMENT_PARTNER_READ</b> partner information including address. Calls SD_PARTNER_READ
    <b>SD_PARTNER_READ</b> all the partners information and addresses
    <b>SD_DETERMINE_CONTRACT_TYPE</b>
    In: at least VBAK-VBELN
    Exceptions: NO CONTRACT | SERVICE_CONTRACT | QUANTITY_CONTRACT
    <b>SD_SALES_DOCUMENT_COPY</b>
    <b>RV_ORDER_FLOW_INFORMATION</b> Reads sales document flow of sales document after delivery and billing
    SD_SALES_DOCUMENT_SAVE create Sales Doc from the copied document
    SD_SALES_DOCUMENT_ENQUEUE to dequeue use DEQUEUE_EVVBAKE
    RV_DELIVERY_PRINT_VIEW Data provision for delivery note printing
    SD_PACKING_PRINT_VIEW
    SD_DELIVERY_VIEW Data collection for printing
    called from RV_DELIVERY_PRINT_VIEW, SD_PACKING_PRINT_VIEW
    RV_BILLING_PRINT_VIEW Data Provision for Billing Document Print
    regards
    vinod

  • Function module for getting stock details for a given period or date range

    Hi experts,
         Any function module available for getting stock details batch, plant, storage location, and period wise. <<removed_by_moderator>>
    Thanks in advance
    M Prasanna
    Edited by: Vijay Babu Dudla on Apr 28, 2009 7:23 AM

    Hi,
    Try with this FM:
    BAPI_MATERIAL_AVAILABILITY .
    Go through this link for more details:
    ABAP Development
    by
    Prasad gvk.

  • Function Module for getting message details on passing message ID.

    Dear All,
    Is there any way in XI through which I can get the complete details about the message if I pass the message ID to it. I am having message ID with me but I am not able to find its all details, is there any function module available??
    Warm Regards,
    N.Jain

    HI,
    Go through the below thread for the same information
    SXMB_MONI transaction table
    In Which Database Table the Messages are Stored in XI
    Thnx
    Chirag

  • Function module for detailes description of Order and long text in task

    Hello gurus,
                       please help me with Function module for detaile description of Order and long text in task list(operation Tab)?
    regards,
    YK

    Hi, 
    You should be able to read the Order short text directly from table AUFK. The Order long text or task list long text can be read by using FM "Read_text". Use Goto> Header on every long text screen to identify the parameters that need to be passed hen using this FM.
    Regards
    Narasimhan

  • Function Module for Equipment Details

    HI,
    Please tell me the functional module for Equipment details.
    i want to get the details for generator details
    Engine
    Alternator
    SIS
    Serial NO
    through passing the Equipment Number.
    Regards
    Surya

    thank you,
    This functon module will be giveing all the details but more then this i need for a particular equipment number i want to get the calss overview, details in class over view i need
    Charecteristic Discription
    value.
    Regards
    Surya

  • Function Module for outline agreement

    Dear Sir,
    I want to know the function module for contract/outline agreement from where I can fetch the details of release orders against the given contract.
    Regards
    Amit Agarwal

    Hi
    Go to SE37 enter the Outline agreement and press F4
    you can see the function module
    (or) Post the same message in  SAP ABAP forum
    G.Ganesh Kumar

  • Bom explosion function module for bypassing phantom materials

    hi,
    function module "cS_BOM_EXPL_MAT_V2" is used to explode the componensts of first level only.
    In my case there are components at first level are phantom assemblies so i want to drill down further to arrive at E or F part which may be at 2nd or 3rd level.
    please suggest any BAPI or function module for the above requirement.
    Thanks.
    Kumar

    Dear Kumar,
    check with following input values for the Functional Module
    FTREL                                                    
    ALEKZ                                                    
    ALTVO                                                    
    AUFSW                                                    
    AUMGB                                                    
    AUMNG                                      0.000         
    AUSKZ                                                    
    AMIND                                                    
    BAGRP                                                    
    BEIKZ                                                    
    BESSL                                                    
    BGIXO                                                    
    BREMS                                                    
    CAPID                           PP01                     
    CHLST                                                    
    COSPR                                                    
    CUOBJ                           000000000000000000       
    CUOVS                                                    
    CUOLS                                                    
    DATUV                           13.05.2008               
    DELNL                                                    
    DRLDT                                                    
    EHNDL                                                    
    EMENG                                      2.000         
    ERSKZ                                                    
    ERSSL                                                    
    FBSTP                                                    
    KNFBA                                                    
    KSBVO                                                    
    MBWLS                           X                        
    MKTLS                           X                        
    MDMPS                                                    
    MEHRS                           X                        
    MKMAT                                                    
    MMAPS                                                    
    SALWW                                                    
    SPLWW                                                    
    MMORY                           1                        
    MTNRV                           S7690339                 
    NLINK                                                    
    POSTP                                                    
    RNDKZ                                                    
    RVREL                                                    
    SANFR                                 
    SANIN                                 
    SANKA                                 
    SANKO                                 
    SANVS                                 
    SCHGT                                 
    STKKZ                                 
    STLAL                           1     
    STLAN                           1     
    STPST                           0     
    SVWVO                           X     
    WERKS                         5501  
    NORVL                                 
    MDNOT                                 
    PANOT                                 
    QVERW                                 
    VERID                                 
    VRSVO                           X     
    I'm using this FM with the above input parameters and I'm getting the necessary details perfectly.
    Please check & revert back.
    Regards
    Mangalraj.S

  • Standard BAPI or Function Module for FB01posting

    Hi Experts,
    My requirement is as follows.
    Invoice details would be sent across from Middleware to SAP and for which I have developed a Custom Remote Enabled Function Module. The Function Module needs to post the data using FB01 Transaction.
    I had planned for recording a BDC for FB01 and post the data, however, we are on the verge of getting upgraded from 4.7 to ECC 6.0. To avoid problems that we might face for change of screens in ECC 6.0, I would prefer using a BAPI or Function Module for FB01 posting, if available, instead of BDC.
    Data coming from Middleware are as follows.
    HEADER:
    BKPF-BLDAT :  Document Date
    BKPF-BUDAT : Posting Date
    BKPF-XBLNR: Reference (Invoice#)
    BKPF-BLART : Document Type
    BKPF-BUKRS : Company Code
    BKPF-BKTXT : DocHeader Text
    BKPF-WAERS : Currency
    LINE ITEM:
    BSEG-LIFNR : Vendor no
    BSEG-WRBTR - Total amt -Debit/Credit -Vendor
    BSEG-ZUONR : Assignment field
    BSEG-EMPFB : Alternative Payee
    BSEG-UZAWE : Payment Method Supplement
    BSEG-ZTERM : Pmt terms
    BSEG-KOSTL : Costcenter
    BSEG-HKONT : GL AccountNumber
    BSEG-WRBTR : Amount for GL
    BSEG-SGTXT : Line item text
    The Vendor Line Item would be one where as GL line items could me more than one.
    Can any of you suggest me a standard BAPI or Func Mod?
    Points will be awarded for valuable inputs.
    Thanks to all!!!!

    You can use RFBIBL00 program for FB01 postings. Go through the program help on how to use this program.
    This program requires a file to be on application server in a certain format.
    You may also refer the program RFBIBLT0 on how the file format should be.
    Hope this helps.
    Thanks,
    SKJ

  • Problem with Time stamp function module for converting US to Japan

    Hi All,
    I need standard function module for converting US Timestamp to Japan, Can any one let me know is there any standard function modules.
    thanks in advance!
    Regards,
    Kalidas.T
    Edited by: Kalidas Thirumoorthy on May 5, 2009 5:29 PM
    Edited by: Kalidas Thirumoorthy on May 5, 2009 5:30 PM
    Edited by: Kalidas Thirumoorthy on May 5, 2009 5:30 PM

    Try this way:
    CONVERT TIME STAMP <tst> TIME ZONE <tz> INTO DATE <d> TIME <t>.
    CONVERT DATE <d> TIME <t> INTO TIME STAMP <tst> TIME ZONE <tz>.
    <tst> is of type P(8) or P(11) with 7 decimal places
    <tz> of type C(6)
    Refer to help.sap.com for more details.

  • Function Module for Start time and End time

    Hi Experts,
    I need a function module for getting particular Work schedule rule start time and endtime and further details by passing personnel number and day.
    Thanks in advance.
    Sunil

    FYI - https://forums.sdn.sap.com/click.jspa?searchID=-1&messageID=5338428
    Thanks,
    SK

  • Function module for the transcation CS02(i.e) BOM

    Hi All,
    I want the function module for the transction CS02.
    Actually I need the details of BOM for any material.
    Please help....Its a urgent requirement.
    Thanks in advance

    Hi,
    You can also try with MGW1_CHANGE_BOM and CS_CL_S_BOM_CHANGE   
    Regards,
    Ram
    Message was edited by:
            Ram Mohan Naidu Thammineni

  • Function Module for search help Exit

    How to create a function Module for search help exits?
    please explain in details with step by step process.

    Hi,
    How to create a function Module for search help exits?
    function module for search help F4IF_SHLP_EXIT_EXAMPLE
    dynamic search help use 'F4IF_INT_TABLE_VALUE_REQUEST'
    please check out the link below it will help you
    A repository object maintained in the ABAP Dictionary. It supplies input fields on Dynpros with single- or multi-column input helps. Search helps can be linked in the Dictionary with components from structures, data elements, and check tables. A search help enables you to search for entry values with assigned data, without you having to know the exact spelling of the value.
    http://help.sap.com/saphelp_46c/helpdata/EN/cf/21ee52446011d189700000e8322d00/content.htm
    please explain in details with step by step process.
    create a search help exit:
    1. create an fm with this interface:
    *" TABLES
    *" SHLP_TAB TYPE SHLP_DESCR_TAB_T
    *" RECORD_TAB STRUCTURE SEAHLPRES
    *" CHANGING
    *" VALUE(SHLP) TYPE SHLP_DESCR_T
    *" VALUE(CALLCONTROL) LIKE DDSHF4CTRL STRUCTURE DDSHF4CTRL
    put this logic in it:
    Delete duplicate filter logic.
    This logic only needs to apply at the 'DISP' event - which is just
    before the hit list is displayed
    if callcontrol-step = 'DISP'.
    delete adjacent duplicates from record_tab.
    endif.
    2. edit your search help in se11 and enter the name of the above search help exit fm
    check this sample code..for dynamic search help
    REPORT  ZTEST_F4HELP                              .
    *---Report with selection screen and to display the list of
    possible entries for field 'B' as per the value in field 'A'.
    parameters: p_vbeln type vbak-vbeln,
                p_posnr type vbap-posnr.
    at selection-screen on value-request for p_posnr.
      data: begin of help_item occurs 0,
              posnr type vbap-posnr,
              matnr type vbap-matnr,
              arktx type vbap-arktx,
            end of help_item.
      data: dynfields type table of dynpread with header line.
      dynfields-fieldname = 'P_VBELN'.
      append dynfields.
      call function 'DYNP_VALUES_READ'
           exporting
                dyname               = sy-cprog
                dynumb               = sy-dynnr
                translate_to_upper   = 'X'
           tables
                dynpfields           = dynfields
           exceptions
                invalid_abapworkarea = 1
                invalid_dynprofield  = 2
                invalid_dynproname   = 3
                invalid_dynpronummer = 4
                invalid_request      = 5
                no_fielddescription  = 6
                invalid_parameter    = 7
                undefind_error       = 8
                double_conversion    = 9
                stepl_not_found      = 10
                others               = 11.
      read table dynfields with key fieldname = 'P_VBELN'.
      p_vbeln = dynfields-fieldvalue.
      call function 'CONVERSION_EXIT_ALPHA_INPUT'
           exporting
                input  = p_vbeln
           importing
                output = p_vbeln.
      select posnr matnr arktx into table help_item
                     from vbap
                          where vbeln = p_vbeln.
      call function 'F4IF_INT_TABLE_VALUE_REQUEST'
           exporting
                retfield    = 'POSNR'
                dynprofield = 'P_POSNR'
                dynpprog    = sy-cprog
                dynpnr      = sy-dynnr
                value_org   = 'S'
           tables
                value_tab   = help_item.
    also check this link it will help you
    /message/3854825#3854825 [original link is broken]
    *********please reward points if the information is helpful to you*************

  • Function module for reading service line items of a po

    function module for reading service line items of a po.............I want to read data from eslh and esll tables to getthe service line details.....
    My requirement is if the item category is 9 I need to print the service line items. So I wan to read the data of service line items from a function module. I am not able to find a fm which fetches both elsh and esll data...

    Hi oskchaitanya ,
    use bapi BAPI_PO_GETDETAIL1.
    Regards
    REA

Maybe you are looking for