Function module for Time zone conversion.

Hi SDN,
Can any one tell is there any FM for conversion of time from GMT to CET or any other time zone
Regards,
Rahul

Try these function modules
STU3_ALERTS_CONV_LOCAL_2_UTC   Converts local time to a given timezone
STU3_ALERTS_CONV_UTC_2_LOCAL   Converts local time to a given timezone
TZ_LOCATION_TIMEZONE                     Time zones: Determine time zone for a location                                                                          (land, region)

Similar Messages

Function Modules for time subtraction.

Hello abapers..
I want two function modules...
1) to subtract 1 hour from time and date.
for eg if the date entered is 23.3.08 and time is 00:00:00
then the function module should give the result as
22.3.08 and 23:00:00.
or if the date is 21.03.08 and time is 12:00:00.
The result should be 21.03.08 and time 11:00:00.
2) the second one is for validation..i am not sure if there is
a function module for that.
I want to validate whether the date entered by the user
in the select option for type sy-datum is in the correct format.
I mean the user should not enter anything except a date.
For eg:
If the user enters 97898jjjj then it should also invalidate this
as well as if the user enters 34.07.08 then also the FM should invalidate this..
Points will be rewarded for helpful answer.

Try this
DATA : diff TYPE i.
PARAMETERS :
       iv_stime TYPE t,
       iv_sdate TYPE d,
       iv_atime TYPE t.
ev_endtime = iv_stime - iv_atime.
diff = ev_endtime - iv_stime.
IF diff > 0.
   ev_enddate = iv_sdate - 1.
ELSE.
   ev_enddate = iv_sdate.
ENDIF.
WRITE : ev_endtime.
WRITE : ev_enddate.

Function module for date format conversion

hi ,
Can someone plzz tell me if there is a SAP standard function module that can convert date of any format to date of a particular format .
Thanks
Sheetal

Hi,
Data: V_date(10) type c.
v_date = 'yyyy/mm/dd'.   " your format.
write : v_date using edit mask '__/__/____'   " this will conver the format
If you want the user specfic format, then use the below code
Data: Date1 type Sy-datym,
         Date2(10) type c.
date1 = Sy-datum
Write: Date1 to Date2.
Write:/ Date2. " This Date2 will have the user Specif format
Regards
Sudheer

Function module for decimal notation conversion

Hi
Is there a function module to convert any decimal notation to the
1,234,567.890 , and if there is , then a sample code will be very useful
Thank you

Hi,
Please try FM C14N_NUMERIC_FORMAT.
or try this.
data: c(100) type c.
data: length type i.
data: offset type i.
c = '1223,54'.
length = strlen( c ).
offset = length - 3.
translate c+offset(1) using ',.'.
write:/ c.
Regards,
Ferry Lianto

Problem with Time stamp function module for converting US to Japan

Hi All,
I need standard function module for converting US Timestamp to Japan, Can any one let me know is there any standard function modules.
thanks in advance!
Regards,
Kalidas.T
Edited by: Kalidas Thirumoorthy on May 5, 2009 5:29 PM
Edited by: Kalidas Thirumoorthy on May 5, 2009 5:30 PM
Edited by: Kalidas Thirumoorthy on May 5, 2009 5:30 PM

Try this way:
CONVERT TIME STAMP <tst> TIME ZONE <tz> INTO DATE <d> TIME <t>.
CONVERT DATE <d> TIME <t> INTO TIME STAMP <tst> TIME ZONE <tz>.
<tst> is of type P(8) or P(11) with 7 decimal places
<tz> of type C(6)
Refer to help.sap.com for more details.

Function Modules for Data and Time

Hi all,
I need 2 function modules for date and time. when we pass current data(sy-datum) and current time (sy-uzeit) into function modules, shoud get date in dd/mm/yyyy or dd.mm.yyyy and time in HH:MM:SS formats.
Thanks in advance

Hi Ranjith,
i think this will b usefull for you..
SAP Bar Chart Function Modules and what they are used for
Function module
Used for
BARC_GRAPHIC_PBO
Starting bar chart at PBO time, using a graphic profile (parameter PROFILE)
BARC_GRAPHIC_PAI
Analyzing data returned by the graphic
BARC_SET_TIME_AXIS
Setting start and end of time axis
BARC_SET_OPTIONS
Setting options
BARC_ADD_CHART
Creating a chart
BARC_SET_CHART_ATTRIB
Setting chart attributes
BARC_ADD_SECTION
Creating a section on the time axis
BARC_SET_SECTION_ATTRIB
Setting section attributes
BARC_ADD_RIBBON
Adding a ribbon to the time axis
BARC_SET_RIBBON_ATTRIB
Setting attributes for ribbons in the chart
BARC_ADD_GRID
Adding a time grid
BARC_SET_GRID_ATTRIB
Setting grid attributes
BARC_ADD_LAYER
Adding a layer (graphic elements)
BARC_SET_LAYER_ATTRIB
Setting layer attributes
BARC_ADD_LINE
Adding a line
BARC_ADD_CALENDAR
Creating a calendar
BARC_SET_CALENDAR_ATTRIB
Setting attributes for a calendar
BARC_ADD_TIME_PROFILE
Creating time profiles
BARC_SET_TIME_PROFILE_ATTRIB
Setting attributes for time profile
BARC_ADD_INTERVAL
Adding a time interval
BARC_SET_INTERVAL_ATTRIB
Setting time interval attributes
BARC_ADD_TIME_OBJECT
Creating a time object
BARC_CONVERT_DATE
Creating a date string in bar chart format
BARC_REVERT_DATE
Converting a date string in bar chart format to date and time
BARC_ADD_DATELINE
Creating a date line
BARC_SET_DATELINE_ATTRIB
Setting dateline attributes
BARC_GET_PROFILE_CONTENTS
Obtaining profile contents for customizing a chart
BARC_GET_COLUMN_WIDTH
Selecting new column width
BARC_SET_COLUMN_WIDTH
Setting the column width
BARC_GET_TEXTINDEX
Obtaining the text index of a field
BARC_SET_LABELS
Positioning the chart display
BARC_SET_COLUMN_ATTRIB
Setting column attributes
BARC_SET_ROW_ATTRIB
Setting row attributes
BARC_SET_ROW_HEIGHT
Setting the line height
BARC_SET_MAXCHARTS
Setting the maximum number of charts sent
If its usefull reward points

Function Module for Start time and End time

Hi Experts,
I need a function module for getting particular Work schedule rule start time and endtime and further details by passing personnel number and day.
Thanks in advance.
Sunil

FYI - https://forums.sdn.sap.com/click.jspa?searchID=-1&messageID=5338428
Thanks,
SK

Conversion Function module for Volume

hi,
Is there any standard function module to do the conversion of VOLUME.
for example : if i have source volume in one unit & i want it in another unit.
regards,
srikanth,Intelligroup.

If it is a straight conversion and you do not need to use the conversion factors tied to a material then you can do something like this.
report zrich_0001.
parameters: p_qtyi type p decimals 2,
 p_uomi type t006a-msehi,
 p_uomo type t006a-msehi,
 p_qtyo type p decimals 2.
at selection-screen.
call function 'UNIT_CONVERSION_SIMPLE'
 exporting
 input = p_qtyi
* NO_TYPE_CHECK = 'X'
* ROUND_SIGN = ' '
 unit_in = p_uomi
 unit_out = p_uomo
importing
* ADD_CONST =
* DECIMALS =
* DENOMINATOR =
* NUMERATOR =
 output = p_qtyo
* EXCEPTIONS
* CONVERSION_NOT_FOUND = 1
* DIVISION_BY_ZERO = 2
* INPUT_INVALID = 3
* OUTPUT_INVALID = 4
* OVERFLOW = 5
* TYPE_INVALID = 6
* UNITS_MISSING = 7
* UNIT_IN_NOT_FOUND = 8
* UNIT_OUT_NOT_FOUND = 9
* OTHERS = 10
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Regards,
Rich Heilman

Function Module for calculating hours between dates and their times.

Hi all,
Is there any standard function module for calculating the time difference in hours between two dates with start and end times.
Regards,
Sudipto.

Sudipto,
How're you ????????????????????
Check out the following Function Module:
SD_DATETIME_DIFFERENCE (Give the difference in Days and Time for 2 dates)
Regards,
Abir
Don't forget to award Points *

Hi is there any function module for radix conversion

Hi,
I need to convert number of base 36 to decimal number. Is there any function module for that.
i.e) z to 35
 10 to 36
 11 t0 37

Hai,
This program perfectly converts a number from one number system to another number system.
REPORT Z_RADIX_CONVERSION.
PARAMETERS:
P_S_RAD(2) TYPE N, " Source Radix
P_D_RAD(2) TYPE N, " Destination Radix
P_S_NUM(5) TYPE C. " Source Number
*" Data declarations...................................................
Work variables *
DATA:
W_LEN TYPE I,
W_FACT TYPE I,
W_D_NUM(5) TYPE N,
W_T_LEN TYPE I,
W_NUM TYPE C,
W_NUM1 TYPE I,
W_REM TYPE I,
W_INDEX TYPE I VALUE 20,
W_T_NUM(30) TYPE C,
W_T_NUMBER(5) TYPE N.
IF P_S_RAD GE 1 AND
 P_S_RAD LE 16 AND
 P_D_RAD GE 1 AND
 P_D_RAD LE 16.
IF P_S_RAD EQ 01 AND P_S_NUM CO '0 ' OR
 P_S_RAD EQ 02 AND P_S_NUM CO '01 ' OR
 P_S_RAD EQ 03 AND P_S_NUM CO '012 ' OR
 P_S_RAD EQ 04 AND P_S_NUM CO '0123 ' OR
 P_S_RAD EQ 05 AND P_S_NUM CO '01234 ' OR
 P_S_RAD EQ 06 AND P_S_NUM CO '012345 ' OR
 P_S_RAD EQ 07 AND P_S_NUM CO '0123456 ' OR
 P_S_RAD EQ 08 AND P_S_NUM CO '01234567 ' OR
 P_S_RAD EQ 09 AND P_S_NUM CO '012345678 ' OR
 P_S_RAD EQ 10 AND P_S_NUM CO '0123456789 ' OR
 P_S_RAD EQ 11 AND P_S_NUM CO '0123456789A ' OR
 P_S_RAD EQ 12 AND P_S_NUM CO '0123456789AB ' OR
 P_S_RAD EQ 13 AND P_S_NUM CO '0123456789ABC ' OR
 P_S_RAD EQ 14 AND P_S_NUM CO '0123456789ABCD ' OR
 P_S_RAD EQ 15 AND P_S_NUM CO '0123456789ABCDE ' OR
 P_S_RAD EQ 16 AND P_S_NUM CO '00123456789ABCDEF ' .
 W_LEN = STRLEN( P_S_NUM ).
 W_T_LEN = W_LEN - 1.
 DO W_LEN TIMES.
 W_NUM = P_S_NUM+W_T_LEN(1).
 CASE W_NUM.
 WHEN 'A'.
 W_NUM1 = 10.
 WHEN 'B'.
 W_NUM1 = 11.
 WHEN 'C'.
 W_NUM1 = 12.
 WHEN 'D'.
 W_NUM1 = 13.
 WHEN 'E'.
 W_NUM1 = 14.
 WHEN 'F'.
 W_NUM1 = 15.
 WHEN OTHERS.
 W_NUM1 = W_NUM.
 ENDCASE.
 W_D_NUM = W_D_NUM + W_NUM1 * ( P_S_RAD ** W_FACT ).
 ADD 1 TO W_FACT.
 SUBTRACT 1 FROM W_T_LEN.
 ENDDO.
ELSE.
 WRITE'Invalid Number'(003).
ENDIF.
ELSE.
WRITE'Enter radix between 1 and 16 '(002).
ENDIF.
W_T_NUMBER = W_D_NUM.
IF P_D_RAD = 1.
DO W_D_NUM TIMES.
 WRITE'O'.
ENDDO.
ELSE.
WHILE W_T_NUMBER NE 0.
 W_REM = W_T_NUMBER MOD P_D_RAD.
 CASE W_REM.
 WHEN 10.
 W_T_NUM+W_INDEX(1) = 'A'.
 WHEN 11.
 W_T_NUM+W_INDEX(1) = 'B'.
 WHEN 12.
 W_T_NUM+W_INDEX(1) = 'C'.
 WHEN 13.
 W_T_NUM+W_INDEX(1) = 'D'.
 WHEN 14.
 W_T_NUM+W_INDEX(1) = 'E'.
 WHEN 15.
 W_T_NUM+W_INDEX(1) = 'F'.
 WHEN OTHERS.
 W_T_NUM+W_INDEX(1) = W_REM.
 ENDCASE. " CASE W_REM.
 SUBTRACT 1 FROM W_INDEX.
 W_T_NUMBER = W_T_NUMBER DIV P_D_RAD.
ENDWHILE.
ENDIF.
WRITE:
/10 'The Equivallent number in Base'(001),
 P_D_RAD,
 'is',
 W_T_NUM.
Reward points if helpful .
regards,
rama pammi

Any Function module for Date conversion

Hi,
In my output the date is coming like 80999898 but the actual date is 01.01.1900.
Could you please tell me is there any Function module for that.
Regards,
Tushar

Use the conv. exit CONVERSION_EXIT_INVDT_OUTPUT for this purpose.
BR,
Suhas

Function modules for the following

Hi,
I want to know the function modules for the following purposes.
1) Check whether a date is valid or not
2) Calculate the no of days between two dates.
Expecting an early response.
Thanks n Regards,
Amit

Hi,
PARAMETERS: p_list LIKE t009b-bumon AS LISTBOX
 VISIBLE LENGTH 11 OBLIGATORY ,
 p_list1 LIKE t009b-bdatj OBLIGATORY.
SELECTION-SCREEN POSITION POS_HIGH.
PARAMETERS: p_list2 LIKE t009b-bumon AS LISTBOX
 VISIBLE LENGTH 11 OBLIGATORY,
 p_list3 LIKE t009b-bdatj OBLIGATORY.
Calling Function Module for calculating no of days between the
selected period
 CALL FUNCTION 'NUMBER_OF_DAYS_PER_MONTH_GET'
 EXPORTING
 par_month = p_list
 par_year = p_list1
 IMPORTING
 par_days = ws_n_days.
 CALL FUNCTION 'NUMBER_OF_DAYS_PER_MONTH_GET'
 EXPORTING
 par_month = p_list2
 par_year = p_list3
 IMPORTING
 par_days = ws_n_days1.
For Concatenating the month and year into the date format
 CONCATENATE p_list1 p_list ws_i INTO ws_c_date1.
 CONCATENATE p_list3 p_list2 ws_n_days1 INTO ws_c_date2.
date = ws_c_date1 - ws_c_date2.
In the above sample code the selection screen has month and year as input.
Also check this link
http://www.sapdevelopment.co.uk/tips/date/datehome.htm
Check FM
RP_CALC_DATE_IN_INTERVAL Add/subtract years/months/days from a date
SD_DATETIME_DIFFERENCE Give the difference in Days and Time for 2 dates
Also for checking valid date:
U can specify the date field as
Select-options: s_date like likp-date(similar to ur requirement)
This itself ceck for the valid date no seperate validation needed.
Thanks & Regards,
Judith.

Function Module for Job reschedule

Hello Experts,
Is there a function module for job rescheduling as i need to create a automation program where i need to select all jobs from excel sheet and reschedule at different time.
Thanks and Regards,
Nikhil Kanegaonkar.

You could use the following FM
- [BP_JOB_READ|http://www.sdn.sap.com/irj/scn/advancedsearch?query=bp_job_read] (read first from TBTCO to fill field JOBCOUNT)
- [BP_JOB_CREATE|http://www.sdn.sap.com/irj/scn/advancedsearch?query=bp_job_create] (change schedule parameters first)
- for recent versions [BP_JOB_COPY|http://www.sdn.sap.com/irj/scn/advancedsearch?query=bp_job_copy]
You should take a look at FM of the FG BTCH and SAP documentation like [Programming with the Background Processing System (BC-CCM-BTC)|http://help.sap.com/saphelp_nwpi71/helpdata/en/fa/096c53543b11d1898e0000e8322d00/frameset.htm]
Regards,
Raymond

Function module for display production order details

Hi All,
I want to display production order details including operation,sub-operations and components using standard FM.I checked 4 FMs, but some are not displaying my require details. I found PM_ORDER_DATA_READ function module, it is displaying all details.But you can execute the function module 2 times for different orders it is giving ABAP dump 'itab_error'. Please get back to me if any one faced this problem or know solution.I am also checked BAPI_ALM_ORDER_GETDETAIL FM.
My require fields are
AUFNR, WERKS, PLNAL, PLNFL, VORNR,UVORN, ARBPL, KTSCH,
LTXA1,OFFSTB,VGW01 etc.
I am using SAP 4.7 release. Please send me either standard FM or BAPI to display all details of production order.
Thanks in Advance
Shaik Basha

Hi,
I had the same problem this morning and I found out a FM you have to run to fix this problem.
FM: CO_IT_SET_FLG_ITAB_NEW
Rgds,
Parise

Error in XXL_FULL_API function module for download report to excel

Hi all,
I am using XXL_FULL_API function module for download report to excel, In this FM we have to fill a table called sema = t_gxxlt_s. in this table we have a fields called
i_sema-col_no = 19.
i_sema-col_src = 19.
i_sema-col_typ = 'STR'.
i_sema-col_ops = 'DFT'
here in 'col_typ' if we put STR in excel it will come as a text but i wnat the time field what i have to pass ?
and for filed 'col_ops' also ??
Thaks,
Sridhar

Hi sridhar joshi,
Please check this program
REPORT Excel.
TABLES:
sflight.
* header data................................
DATA :
header1 LIKE gxxlt_p-text VALUE 'Suresh',
header2 LIKE gxxlt_p-text VALUE 'Excel sheet'.
* Internal table for holding the SFLIGHT data
DATA BEGIN OF t_sflight OCCURS 0.
 INCLUDE STRUCTURE sflight.
DATA END OF t_sflight.
* Internal table for holding the horizontal key.
DATA BEGIN OF t_hkey OCCURS 0.
 INCLUDE STRUCTURE gxxlt_h.
DATA END OF t_hkey .
* Internal table for holding the vertical key.
DATA BEGIN OF t_vkey OCCURS 0.
 INCLUDE STRUCTURE gxxlt_v.
DATA END OF t_vkey .
* Internal table for holding the online text....
DATA BEGIN OF t_online OCCURS 0.
 INCLUDE STRUCTURE gxxlt_o.
DATA END OF t_online.
* Internal table to hold print text.............
DATA BEGIN OF t_print OCCURS 0.
 INCLUDE STRUCTURE gxxlt_p.
DATA END OF t_print.
* Internal table to hold SEMA data..............
DATA BEGIN OF t_sema OCCURS 0.
 INCLUDE STRUCTURE gxxlt_s.
DATA END OF t_sema.
* Retreiving data from sflight.
SELECT * FROM sflight
 INTO TABLE t_sflight.
* Text which will be displayed online is declared here....
t_online-line_no = '1'.
t_online-info_name = 'Created by'.
t_online-info_value = 'KODANDARAMI REDDY'.
APPEND t_online.
* Text which will be printed out..........................
t_print-hf = 'H'.
t_print-lcr = 'L'.
t_print-line_no = '1'.
t_print-text = 'This is the header'.
APPEND t_print.
t_print-hf = 'F'.
t_print-lcr = 'C'.
t_print-line_no = '1'.
t_print-text = 'This is the footer'.
APPEND t_print.
* Defining the vertical key columns.......
t_vkey-col_no = '1'.
t_vkey-col_name = 'MANDT'.
APPEND t_vkey.
t_vkey-col_no = '2'.
t_vkey-col_name = 'CARRID'.
APPEND t_vkey.
t_vkey-col_no = '3'.
t_vkey-col_name = 'CONNID'.
APPEND t_vkey.
t_vkey-col_no = '4'.
t_vkey-col_name = 'FLDATE'.
APPEND t_vkey.
* Header text for the data columns................
t_hkey-row_no = '1'.
t_hkey-col_no = 1.
t_hkey-col_name = 'PRICE'.
APPEND t_hkey.
t_hkey-col_no = 2.
t_hkey-col_name = 'CURRENCY'.
APPEND t_hkey.
t_hkey-col_no = 3.
t_hkey-col_name = 'PLANETYPE'.
APPEND t_hkey.
t_hkey-col_no = 4.
t_hkey-col_name = 'SEATSMAX'.
APPEND t_hkey.
t_hkey-col_no = 5.
t_hkey-col_name = 'SEATSOCC'.
APPEND t_hkey.
t_hkey-col_no = 6.
t_hkey-col_name = 'PAYMENTSUM'.
APPEND t_hkey.
* populating the SEMA data..........................
t_sema-col_no = 1.
t_sema-col_typ = 'STR'.
t_sema-col_ops = 'DFT'.
APPEND t_sema.
t_sema-col_no = 2.
APPEND t_sema.
t_sema-col_no = 3.
APPEND t_sema.
t_sema-col_no = 4.
APPEND t_sema.
t_sema-col_no = 5.
APPEND t_sema.
t_sema-col_no = 6.
APPEND t_sema.
t_sema-col_no = 7.
APPEND t_sema.
t_sema-col_no = 8.
APPEND t_sema.
t_sema-col_no = 9.
APPEND t_sema.
t_sema-col_no = 10.
t_sema-col_typ = 'NUM'.
t_sema-col_ops = 'ADD'.
APPEND t_sema.
CALL FUNCTION 'XXL_FULL_API'
EXPORTING
* DATA_ENDING_AT = 54
* DATA_STARTING_AT = 5
 filename = 'TESTFILE'
 header_1 = header1
 header_2 = header2
 no_dialog = 'X'
 no_start = ' '
 n_att_cols = 6
 n_hrz_keys = 1
 n_vrt_keys = 4
 sema_type = 'X'
* SO_TITLE = ' '
TABLES
 data = t_sflight
 hkey = t_hkey
 online_text = t_online
 print_text = t_print
 sema = t_sema
 vkey = t_vkey
EXCEPTIONS
 cancelled_by_user = 1
 data_too_big = 2
 dim_mismatch_data = 3
 dim_mismatch_sema = 4
 dim_mismatch_vkey = 5
 error_in_hkey = 6
 error_in_sema = 7
 file_open_error = 8
 file_write_error = 9
 inv_data_range = 10
 inv_winsys = 11
 inv_xxl = 12
 OTHERS = 13
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
please refer this link
http://www.thespot4sap.com/Articles/Download_to_excel.asp
Best regards,
raam

Function module for Time zone conversion.

Similar Messages

Maybe you are looking for