Function module going for DUMP

Hi ALL,
I have import request and i got sucess .My 3 function modules are import to client system.2 FM are working properly but 1 function module is going for DUMP.
When iam Executing this FM through SE37 F8 its running but iam not able to display or change this ZFM.
In our DEV sytem it is working properly.but Client system it is going for DUMP.
I have gone dump analysis its saying
An exception occurred. This exception is dealt with in more detail below
. *The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR',
was neither caught nor passed along using a RAISING clause, in the procedure
MO_IMPORT_MODIFICATIONS" "(METHOD
Length error occurred during the IMPORT statement
*The system found when importing that the target object was longer or
shorter than the object to be imported*
Thanks in Advance,
Madhu.
Edited by: madhubabu rao on Apr 23, 2009 10:34 AM
Edited by: madhubabu rao on Apr 23, 2009 10:36 AM

Hi sekhar,
I did not transport individually.I have transport 3 FM in a function group and it is assigned to a Package.
First i have 2 FM in my function group after that i have copied one more FM from another Function group.
in SE80 right click -->copy it asked me function group name only .not transport number.
After copy the FM i have transport total package.2 FM are working properly .The FM which i have copied it is not able to display or edit.
Madhu

Similar Messages

Import FM is going for DUMP

Hi All,
I have import request and i got sucess .My 3 function modules are import to client system.2 FM are working properly but 1 function module is going for DUMP.
I have gone dump analysis its saying
"Length error occurred during the IMPORT statement."
"The system found when importing that the target object was longer or
shorter than the object to be imported."
where did i mistake while import ? or while transport?
That FM is working properly in our DEV.
Thanks in Advance,
Madhu.

Hi Madhu,
Suggested to post this in logistics forum for better answer.
Software Logistics
Regards,
Debasis.

Call for adobe form is going for dump for multiple users

hi,
i am calling an adobe form in a program i.e. for multiple users. now my problem is.....
3 people are using same tcode to generate the adobe form output for different data. but when they click at a time on the button to generate the adobe output, then adobe form is coming for only one user and it is going for dump for other users.
and this dump is coming because of exception "CX_FP_API_INTERNAL" in funtion module FP_FUNCTION_MODULE_NAME which i am using to get the function module name of the adobe form in my program.
can u please give me some solution to rectify this issue....

That's nothing!
An engineer and I contacted Adobe technical support by phone to ensure the PC I was having custom built was configured to its optimum. They advised XP64 as the best operating environment. After that discussion we had to completely revise procurement, etc to get the bits and compatible XP64 compatible software, putting the build project back a few weeks as well, Imagine how I laughed when I found out on one of these forums that XP64 is the worst choice and totally unsupported by CS4!
I have written to Shantanu Narayen, Adobe CEO and didn't even get an acknowledgement I raised this last week on the Adobe stand at BVE and was told they'd get someone to contact me asap but guess what, niet...! To be fair there has been one Adobe executive that recognises the problem and the damage poor customer support is causing the company; he has been as helpful as he can. Unfortunately, it seems the overall Adobe culture at the top is "get the money and run". If your problem goes beyond what's already on their web pages, tough luck!
Regards,
Graham

Function module ISR_GET_DATA_FROM_XML throwing dump.

Hi All,
Function module ISR_GET_DATA_FROM_XML throwing dump.
The dump says,
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "ISR_GET_DATA_FROM_XML" "(FUNCTION)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component.
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
Can you please help me in resolving this error.
PERFORM set_tag_constants.
set size of XML document
ld_size = id_size.
create the input stream
lr_stream = ir_ixml_stream_factory->create_istrea
     table = it_xml
     size = ld_size ). create XML document object
lr_dom = ir_ixml_factory->create_document( ).
create parser
lr_parser = ir_ixml_factory->create_parser(
     stream_factory = ir_ixml_stream_factory
     istream        = lr_stream
     document       = lr_dom ).
Thanks
Rohini.

Hi,
SELECT MBLNR
           MJAHR
           FROM MSEG
           INTO TABLE I_MKPF
           WHERE MBLNR IN S_MBLNR AND
                       MJAHR IN S_MJAHR.
IF I_MKPF IS NOT INITIAL.
SELECT * FROM MSEG INTO TABLE O_MSEG FOR ALL ENTRIES IN I_MKPF
      WHERE MBLNR   =    I_MKPF-MBLNR
        AND MJAHR   =    I_MKPF-MJAHR
        AND MATNR   IN   I_MATNR
        AND WERKS   IN   I_WERKS
        AND LGORT   IN   I_LGORT.
ENDIF.
ALSO CHECK FM u2018/BEV2/ED_REA_MSEG_MKPFu2019.
Regards,
Deepa Kulkarni

At F4IF_INT_TABLE_VALUE_REQUEST program goes for dump

Hi,
The following piece of code in my program goes for dump.Please help:
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_screen-low.
SELECT FIELD1 FROM TXXX INTO TABLE T_field.
    IF SY-SUBRC = 0.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          RETFIELD               = s_screen
        TABLES
          VALUE_TAB              = T_field.
    ENDIF.

Hi,
I think you need to write
Try with the below code.
PARAMETERS: p_bukrs(4).
DATA: BEGIN OF itab OCCURS 0,
       bukrs LIKE t001-bukrs,
      END OF itab.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_bukrs.
SELECT bukrs FROM t001 INTO TABLE itab.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'BUKRS' ---> Field from internal table Itab
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      dynprofield     = 'P_BUKRS' --> Screen field
      value_org       = 'S'
    TABLES
      value_tab       = itab
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
If it is a select option is s_bukrs then
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'BUKRS'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      dynprofield     = 'S_BUKRS-LOW'
      value_org       = 'S'
    TABLES
      value_tab       = itab
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Kumar Bandanadham
Edited by: Velangini Showry Maria Kumar Bandanadham on Jun 12, 2009 7:00 AM

Function module exits for Tcode MD11.

Please tell me, Function module exits for Tcode MD11.
Reg .
Praju

Hi
LMDR2001
LMDZU001
Try out these exits.
Check the folloing BADI's
MD_PLDORD_SCHEDULING
MD_PIR_FLEX_CONS
MD_PLDORD_SCHEDULING
Regards
Divya

Function module name for routing fom production orders

Function module name for routing fom production orders

Hi
There are lot of fun modules related to routing
like
BAPI_ROUTING_CREATE
BAPI_ROUTING_EXISTENCE_CHECK
goto SE37 Tcode
enter routing press F4
you will get a lot out of that use the required one
Reward points for useful Answers
Regards
Anji

Function Module (BAPI) for Delivery Change

Dear All,
We have a Function Module "BAPI_SALESORDER_CHANGE" for changes in sales order, wherein we also can enter Texts in sales order.
Please tell me similar such function module for Outbound Delivery, wherein I can enter / insert / change the Texts (both Header & Item) in a deivery document.
Regards,
Dhananjay

Thanks
Where in this Function Module do I find the table / parameter for adding text at item & header level.
Regards
Dhananjay

Function module need for 0fiscvarnt

Hi i have 0comp_code,budat and 0fiscper as a source fields,now i want to get 0fiscvarnt...please give me any logic or function module available for that
thanks

Hi,
Usually fiscal year variant is constant if not getting populated from source system.
Check with function team member what Fiscal year variant they using.
Regards,
Akshay

Function module used for ENQUEUE_EIQMEL & DEQUEUE_EIQMEL function

Hi All,
It should be highly appreciable if any one could please help.
I need the name of the function module used for ENQUEUE_EIQMEL & DEQUEUE_EIQMEL function.
waiting for help.
Thanks
Shaw

Hi,
The names 'ENQUEUE_EIQMEL' and 'DEQUEUE_EIQMEL ' you have mentioned are itself the function modules. Which other FM's you need i didnt understand.
These are FM to ahndle lock objects 'QMEL'.
please reframe your question in case of further issues.
Regards,
Mansi.

Function module(s) for Cube Collapsing/Compression

Hi Experts,
can anybody tell me if there's a SAP Function module availbale for Collapsing/Compressing requests of a cube ?
Background is we want to automate collapsing of cubes by an APAB report instead of using a process chain or RSA1.
Any suggestions? Any pitfalls for such an implementation ? Any expieriences ?
We're on SAP BI 7.00 19, Oracle 10.2.0.4
Best regards,
yk

Hi Srinivas,
thanks for the quick answer, I will check the FM you mentioned.
We think of a cube exceptions list wich should NOT be condensed, and all OTHER cubes should be condensed.
With a process chain we have to maintain these OTHER list manually. In an ABAP report we could exclude the exceptions and condense the rest.
Developers tend to "forget" to add the CONDENSE step. So with time more and more cubes store only in F-tables and nothing in the E-tables (producing more workload as query runtime, DB maintanence like index creation runtime , statistic runs ...) and last but not least occupy disk space wich is expensive if you have a mirrored high performance disk system .
Best regards,
yk

Function module/BAPI for executing VD51/VD52 transactions

Hi
Warm greetings to all,
I require a function module/BAPI for executing VD51/VD52 transactions. Can anyone help on this
Sreekanth

Hi Sreekanth,
Use this.
There is an FM which is used by standard transaction
'RV_CUSTOMER_MATERIAL_UPDATE' .
Ex Code -
CALL FUNCTION 'RV_CUSTOMER_MATERIAL_UPDATE'
IN UPDATE TASK
TABLES
XKNMT_TAB = XKNMT
YKNMT_TAB = YKNMT
TCATALOG_TAB = LT_CATALOG.
commit work.
Regards,
Vijay

Function Module / BAPI for Creating Material freight Group

Hi All,
Can anyone tell me the Function Module / Bapi for creating material freight group.
Regards,
Raj.

Bapi for creating material freight group. :: You actually use mm01 or mm02 to change data for material flight.
So you can use BAPI for mm02 and mm01
For Ex:
BAPI_MATERIAL_SAVEDATA
Hope this helps

Function Module Name for Graph

HI,
Can any body tell me Function Module name for creating graph with horizontal scrollable.I dont want standard graph button.
Thanks,
Rakesh

Hello,
Check this standard programs they are using the same FM
RFDOPR20                         Customer Payment History
RFVD_COMPRESSION_01_I01
RPRSTA01                         Travel Expense Reporting by Period
RPSTA100                         Time-Related Statistical Reporting
RPSTA200                         Time-Related Statistical Reporting
RPSTA2GR
RQALVF16
RQETBI10                         Inspection lot selection
RSDB4007                         iSeries: Display Wait Statistics by SAP Instance
RSHOST10                         Monitor for OS Collector (ST06)
RSORA003                         Statistics of Physical Accesses to Oracle Data Base
RSORA007                         Statistics of Data Base Wait Situations
RSORA138                         IO Stat for Each User Session (ORA7 V$SESS_10)
Check this 3 FM
GRAPH_2D                       Calling up the 2D business graphics
GRAPH_2D_MENUE                 DO NOT USE (use 'GRAPH_2D' and 'GRAPH_BUSG_MENU_SET')
GRAPH_MATRIX_2D                Calling up the 2D graphics (user-friendly version)

Function module / BAPI for FBRA IN 3.1 VERSION?

Hello all,
Could you please suggest Function module / BAPI for FBRA (Reverse and cancel) transaction in 3.1 version.
Thanks,
Subba

Please check this FM perhaps it may help.
CALL_FB08
REVERSE_CLEARING
RESET_CLEARED_ITEMS_BDC_WRITE.
Regards
Kiran Sure

Function module going for DUMP

Similar Messages

Maybe you are looking for