Function module in BADI
hi,
have anyone worked with function module in BADI.if so plz
let me know how how to do
my current requirment is on that
poits will be rewarded
regards
raj
Hi Raj,
check out these links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0456c54-0901-0010-f0b3-cd765fb99702
Differences between BADI and User Exits
BADI's
BADI
CMOD Vs BADI....!!!!!!!!!
http://help.sap.com/saphelp_erp2005/helpdata/en/a3/1d40425c459923e10000000a155106/frameset.htm
BAdI(Business Addins) are enhancement techniques using Object Oriented Technique.
Users of BAdI can customize the logic according to the specific requirements (User-defined) or use the standard logic available.
Each Business Add-In has
At least one BAdI definition
A BAdI interface
A BAdI class that implements the interface
For User-defined BAdI,
developer creates an interface for the add-in.
Enhancement management creates an adapter class that implements the interface
Developer creates an instance of the class in the application program and calls the corresponding methods.
For standard BAdI, interface and class will be predefined by SAP.
Adapter class performs these tasks
Control ( the class calls all active implementations)
Filtering (If the Add-in has to be executed under certain conditions, the class ensures that only certain implementations are executed)
Similar Messages
-
List of Functional Module and BADIs
Hi Forum,
I m new in this CRM, started as a CRM functional.
Just want to know from where can i get list of all FUNCTIONAL MODULES and BADI.
and also is it mandatory for functional consultant to have gud knowledge and expert in usage of mentioned BADI and Functional Modules..
Kindly reply soon...
Points will surely be awarded.
Regards
Rajeev SinghHi Rajeev,
Your can view the function modules in transaction SE37.
And BADIs in SE18.Its not mandatory to know the function module details or Badi details for a functional consultant , but it always good to have a knowledge. It will reduce the task of technical consultant.
Like Function Module CRM_ORDER_READ, is used to get the details of any business transaction. Simlarly BADI ORDER_SAVE is called every time u save a transaction etc.
Regards,
Shalini Chauhan -
Enhancement points option: Function modules or BADI
Hi, I am on ECC 6.0 and I need to validate and set some requirement in customer sales area data when user input the document output message in Documents tab strip screen 7003 of sapmf02d in transaction XD01 or XD02.
I found that there is function module EXIT_SAPMF02D_001 that I probably can use to create an implicit enhancement point to validate table T_KNVD or I can use BADI customer_add_data. Can someone suggest which way is better and why? I am new to this so could someone show me screen by screen on how to create and implement BADI.
I am confusing about should I create a ZBADI or using existing BADI customer_add_data. If I use existing BADI how can I add my own method with my own code.
Thanks.Thanks. Could you explain to me how does the custom BADI get call to execute my code? Say
I have a customer document screen 7326 (Customer Master Subscreen SD Documents in program SAPMF02D). What I want is when user click save, I want to do some validation on the output message that they enter and issue some warning or error messages.
I am on ECC 6.0 so I can create a BADI from Enhancement spot not from SE18. SAP has a BADI called CUSTOMER_ADD_DATA with class CL_EX_CUSTOMER_ADD_DATA and interface IF_EX_CUSTOMER_ADD_DATA.
When I create a ZBADI_CUST, which interface class I put in the IF_EX_CUSTOMER_ADD_DATA
or a ZIF_EX_XX so that I can create my own method? How does the BADI get called when I am in transaction XD02 and click the save button? Could you kindly show me step by step the procedure.
Thanks. -
Hi BW gurus
I have a datasource 0CRM_SRV_PROCESS_H and i need to enhance it where the table is BUT000 source field is PARTNER
in the datasource im taking ZZENDCUST as the enhanced field for that i have a pseudo code like (Use FM CRM_ORDER_READ. Pass Transaction number GUID and get Partner from the table ET_PARTNER (Field: PARTNER_NO) where PARTNER_FCT = u2018ZECu2019.).This pseudo code is for my reference .My requirement is that i need to use a standard BADI RSU5_SAPI_BADI for this .how to go with this requirement.I need to know that how the BADI and function module can be linked.
Regards,
SivaHi Siva:
You need to look for "Enhancing datasources". Basically, in the source system, go to
t-code: SE18
Select: BADI NAME: RSU5_SAPI_BADI
In the Menu: Enhancement Implementation, select: Create.
You can also display the BADI and click on the documentation, there is good information there.
See this link for more information:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3001894b-b1fb-2910-77ba-e80b6f2053b7?QuickLink=index&overridelayout=true -
Standard Function Modules, BAPIs, BADIs and User Exits in OM
How do I check what are the Standard Function Modules / BAPIs in OM or any HR sub modules like PA, Comp, TEM etc..
use Tcode <b>BAPI</b> and navigate to relevant module.
for FM go to se37 and search with HR* or RH* -
Function Module for equipment Link
Dear all,
is there any function module or badi to get list of link from an equipment
thanks
Lukman Hakim.hi Anjaneya..,
the link that i mean is link from an equipment to other equipment.
when we create maintenance order (IW31), there is a tab 'Object' for entering object list. and there is a need
to enter automatically equipments ( that have link to the equipment in maintenance order) to that object list. -
Function module required to hide assignment block for Opportunity.
Hi all,
I have an requirement where i have to hide the assignment block "subsequent assignment" for the opportunity. I dont have any idea how to do it. Is there any function module or BADI to do so.
Please reply if you have any hints about that.
Thanks and Regards.
Raman Khurana.Hi Raman,
there are several ways:
1.
Implement method DO_CONFIG_DETERMINATION and get another configuration for the overviewpage. In this configuration you can display the assignmentblocks as desired.
2.
Methods DETACH_STATIC_OVW_VIEWS in combination with REATTACH_STATIC_OVW_VIEWS.
Here you can iterate over all assignment blocks and strip those not wanted from the UI.
3.
In the business partner there is a BAdI for this. THere might be one for BT as well. Maybe someone knows, or debug for the call yourself.
For detail use the search functionality of this forum. There have been some threads regarding this the last weeks. -
Function module (FM) to read budget to be used in n-step approval badi
We have SRM 5.0 with ECC 6.0 (extended classic). For capital expenses we are going to have budget check in SRM based of account assignment internal orders in R/3. In shopping cart line item approval workflow, it is required to read the budget available for that internal order and compare with shopping cart value...what is the function module to read budget assigned to that internal order, that will used in n-step approval badi at every step??
Thanks,
Kim r.Hi
<b>Please try the related SRM function modules, which will definitely help -></b>
B470_BUDGET_READ
BBP_PD_USER_BUDGET_AMOUNTSPENT
BBP_PD_USER_BUDGET_CHECK
BBP_PD_USER_BUDGET_DEFINED_GET
BBP_PD_USER_BUDGET_SAVE
BBP_PD_USER_BUDGET_SCVALUE_GET
BBP_REQREQ_CHECK_BUDGET
META_BUDGET_READ
META_BUDGET_READ Function module in turn calls RFC-enabled 'BBP_BUDGET_READ' Function module in the R/3 or the ECC System.
Hope this will definitely help.
Do let me know.
Regards
- Atul -
Function Module for creation of variant in BADI
I need to create a variant to store shipment no's which are coming in BADI. And variant need to be passed to a report which has to be run Background. can anyone help me out how to do it. Can anyone know the function module for this.
Hi Anirban,
Use the bapi BAPI_BUSPROCESSND_CREATEMULTI to achieve the same.
<b>Reward points if it helps.</b>
Regards,
Amit Mishra -
BADI or function module for updating open purchase orders
Hi all,
Does anyone know of a BADI or function module which can be used for updating item prices in open purchase orders?
All helpful answers are highly appreciated!
Regards,
MV1 ) execute this program in se38 .enter the input as transaction code for which you want list of User
Exit.
REPORT z_find_userexit NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP® User Exits exists.
*& Tables
TABLES : tstc, "SAP® Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP® Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP® Modifications
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
2) Second way is to go to transaction code SE93 .enter transaction code click on display.
There you will see the package. Copy that package name.
Go to transaction code se84
Enhancements -customer exits-enhancementsu2014enter package there and execute.
You will get list of exits.
3) BAPI for PO change is
BAPI_PO_CHANGE -
Use of function module : NUMBER_GET_NEXT in BADI TRIP_WEB_NUMBER
Hi All,
I am implementing BADI TRIP_WEB_NUMBER and using function module NUMBER_GET_NEXT to get the next number from a number range when the function module throws an exception how can i pass the exception to the exporting parameter
of the BADI 'RETURN' which is of table type BAPIRETTAB.
Do i need to handle exception as below?
Case sy-subrc
When '1'
ls_return- MESSAGE = 'error message 1'
When 2
ls_return- MESSAGE = 'error message 2'
What should i pass in the other fields of ls_return i mean like TYPE,ID,NUMBER etc??Hi
You have to pass the message in the proper structure in the RETURN parameter
Exampple
return-type = 'E'.
return-number = '12'.
return-message = 'number generation error'
Regards
Vijay V -
Regarding the usage of HR_INFOTYPE_OPERATIONS function module in ECM badi i
Hi All,
We have requirement where we need to update the infotype 0015 while implementing the badi 'HRECM00_ACTIVATION'.
To achieve this functionality we are calling the HR_INFOTYPE_OPERATION function module to update the infotype 15. But we are getting the runtime error.
Can some one suggest how to solve this issue.
Thanks & Regards,
Sreelatha Gullapalli.thanx for ur reply...
But i want to use Transmission Medium 5 only as i have the requirement to Send the data as an EMAIL or FAX depending on the Communication Method specified in the Partner Number.
Actually SAP Help also explains the usage of this medium using the same requirement as mine... but then it never anywhere specified on how the Print Program will be...
I also checked the standard output type CPAC used in Application V7 to which transmission medium 5 is assigned. And the print program assigned to this output type has no coding on sending the email using the FM. So i am very very confused.... I have seen few postings in this forum on this topic.. but not clear enuf to clarify my confusion...
Kind Regards,
Tanuja -
Hi,
Anyone know of any BADI or function module for amending Account Assignment in Purchasing Document (PR, PO)?Go to se18,
Check both BADI names:
ME_PROCESS_PO_CUST and
ME_PROCESS_PO_CUST.
If you want to use it at save: you can select the method: Post,
if you want to code after save( after completion of transaction) then go for method: CLOSE.
Reward point if helpful,
Rgs,
Ashok -
Issue with function module HR_INFOTYPE_OPERATION in badi HRPAD00INFTY
Hello All,
I have a business scenario wherein, when user saves data for infotype 0002 from tcode PA30, i have create a new record for infotype 0105 by copying existing record and just changing the date.
For the same I am using funtion module HR_INFOTYPE_OPERATION inside badi HRPAD00INFTY method AFTER_INPUT.
When I am running the same function module in a independent program, its running fine. But when I run it inside the badi method, it runs with sy-subrc = 0 and no error, but later in the standard program MP000200,in pai module PRE_INPUT_CHECK, it tries to execute this statement MOVE <namst> TO <subty> and gives dump, with runtime error MOVE_TO_LIT_NOTALLOWED_NODATA and saying that "Error at assignment: Overwritten protected field.".
Have tried all the options of function module HR_INFOTYPE_OPERATION, but nothing is helping.
Kindly let me know if any information on the same.
Best Regards,
Rahul MalaniHave you checked what's in the Subtype field of table T777D for infotype 0002?
IF t777d-namst ne space. "QNOK025939
MOVE <namst> TO <subty>.
ENDIF.
Usually this sentence won't be executed unless there is something in that field. Usually we don't have subtypes for IT0002.
Also make sure that the infotype that gives the dump is 0002 and not 0105.
Regards. -
BADI /BAPI /Function Module in PP
PP Experts,
I need help to identify the BADI /BAPI /Function Module in PP for
BOM Explosion multilevel (TXn CS11)
Planned Order Create and Change (Txn MD11/MD12)
Production Order Create and Change (CO01/CO02)
Simulation Order (Co01S/Co02S)
Appreciate your valuable inputs.
Thanks and Regards,
PradeepHi,
Following Enhancements available for the said T-Codes
Transaction Code - CS11 Display BOM Level by Level
Enhancement
PCSD0014 Wissensbasierte AuftragsStl:Status setzen beim fixieren
PCSD0013 Customer-specific processing of an explosion for BOM browse
PCSD0012 Customer - Mat. number/mat. number during material exchange
PCSD0011 Knowledge-based order BOM, parallel update
PCSD0010 Order/WBS BOM, determine explosion date
PCSD0009 Order/WBS BOM, determine URL page
PCSD0008 WBS BOM: Customer-specific explosion for creating
PCSD0001 Applications development R/3 BOMS
PCSD0002 BOMs: Customer fields in item
PCSD0003 BOMs: Customer fields in header
PCSD0004 BOM comparison
PCSD0005 BOMs: component check for material items
PCSD0006 Mass changes user exit
PCSD0007 Check changes in STKO
Business Add-in
BOM_EXIT BOM User Exit
BOM_IPPE iPPE Checks Within BOM Maintenance
BOM_UPDATE Maintain BOMS
CEWB_BOM_CUS_FIELDS EWB: Customer Fields with BOM Header (Screen Enhancement)
CEWB_BOM_UPDATE Check Bill of Material on Saving
CEWB_ITM_CUS_FIELDS EWB: Customer Fields with BOM Item (Screen Enhancement)
Transaction Code - MD11/MD12 Create Planned Order
Enhancement
LMDR2001 User exits restr. profiles of opt. pur.ord.-based load bldg
LMDZU001 User exits in additional planning
Transaction Code - CO01/CO02/CO01S/CO02s Create production order
Enhancement
PPCO0010 Enhancement in make-to-order production - Unit of measure
PPCO0012 Production Order: Display/Change Order Header Data
PPCO0013 Change priorities of selection crit. for batch determination
PPCO0015 Additional check for document links from BOMs
PPCO0016 Additional check for document links from master data
PPCO0017 Additional check for online processing of document links
PPCO0018 Check for changes to production order header
PPCO0019 Checks for changes to order operations
PPCO0021 Release Control for Automatic Batch Determination
PPCO0022 Determination of Production Memo
PPCO0023 Checks Changes to Order Components
STATTEXT Modification exit for formatting status text lines
PPCO0009 Enhancement in goods movements for prod. process order
CCOWB001 Customer exit for modifying menu entries
COIB0001 Customer Exit for As-Built Assignment Tool
COZF0001 Change purchase req. for externally processed operation
COZF0002 Change purchase req. for externally procured component
PPCO0001 Application development: PP orders
PPCO0002 Check exit for setting delete mark / deletion indicator
PPCO0003 Check exit for order changes from sales order
PPCO0004 Sort and processing exit: Mass processing orders
PPCO0005 Storage location/backflushing when order is created
PPCO0006 Enhancement to specify defaults for fields in order header
PPCO0007 Exit when saving production order
PPCO0008 Enhancement in the adding and changing of components
Business Add-in
SIDAT_UPDATE Change date of price simulation
CAUFVD_CHANGE BAdI: Overall Network Scheduling with Selection Option
AFABD_CHANGE Change Relationship
PPPI_SEL_ORD_EXT_REL
Regards
Ahsan
Maybe you are looking for
-
7.0 question on IMG entry Define Acct Ident for Multi BP
IMG t-code CRMC_IC_BPPROFMUL in the Profile Default select Search Tabs "Account Roles" choosing Account BP Business Partner (sequence 10) then choosing account roles are config entries CRM000 Sold-To Party seq 10 CRM006 Consumer seq
-
Hi Java People, I have a class A: class A { public int a1; public int a2; public A() { } // end A class and a class B that extends A: class B extends A { public int B1; public B() { } // end B class and somewhere in my code I have an instance aObj of
-
did every one have ex. how i use dialog program what i do with pbp and pai thankes
-
IrisPen Express - help needed with driver no loading
Anyone use IrisPen (Express or Executive; they don't sell IrisPen II anymore) with their MacBook (I'm using os.10.4.8)? I used IrisPen II with my old Windows and the hand scanner worked great. But it was old and not working well. Bought new IrisPen E
-
Hi , I have been searching around the setting and the net and no luck , wondering how to turn off fill clour preview of a vector shape before the path is closed . I am in Photoshop CC. Thanks