Function module in loop
i m using "BAPI_GL_GETGLACCPERIODBALANCES" FUNCTION MODULE.
LOOP AT IT_OUTPUT INTO WA_OUTPUT .
CALL FUNCTION 'BAPI_GL_GETGLACCPERIODBALANCES'
EXPORTING
COMPANYCODE = WA_OUTPUT-BUKRS
GLACCT = WA_OUTPUT-HKONT (A/C NO)
FISCALYEAR = WA_OUTPUT-GJAHR
CURRENCYTYPE = '10'
* IMPORTING
* BALANCE_CARRIED_FORWARD =
* RETURN =
TABLES
ACCOUNT_BALANCES = IT_OUTPUT.
ENDLOOP.
I M GETTING ALL RECORDS IN IT_OUTPUT.BUT WHEN I AM USING THIS FM, I AM NOT GETTING RECORDS FOR ALL A/C NO.
PLZ SUGGEST .....
THANKS
Moderator message: please do not post in all upper case.
Edited by: Thomas Zloch on Mar 15, 2011 9:06 AM
Hi Sanket,
You need to have three tables of type IT_OUTPUT,
1) One which will have the input values that you need to pass to the BAPI - IT_OUTPUT_IN.
2) The second table to get the out from the BAPI - IT_OUTPUT_OUT.
3) The third table to accumulate the output from the BAPI - IT_OUTPUT_FINAL.
change the code as given below,
LOOP AT IT_OUTPUT_IN INTO WA_OUTPUT .
CALL FUNCTION 'BAPI_GL_GETGLACCPERIODBALANCES'
EXPORTING
COMPANYCODE = WA_OUTPUT-BUKRS
GLACCT = WA_OUTPUT-HKONT (A/C NO)
FISCALYEAR = WA_OUTPUT-GJAHR
CURRENCYTYPE = '10'
IMPORTING
BALANCE_CARRIED_FORWARD =
RETURN =
TABLES
ACCOUNT_BALANCES = IT_OUTPUT_OUT.
append lines of IT_OUTPUT_OUT to IT_OUTPUT_FINAL.
REFRESH: IT_OUTPUT_OUT.
ENDLOOP.
With your current code: You are overwriting the entries of IT_OUTPUT every time you are calling the BAPI, and re-using the same entries in the loop.
Regards,
Chen
Similar Messages
-
Function module Global variables not cleared from memory?
Hi,
This is may be simple & stupid question ( after posting 4242 posts ):)
" Declaration in TOP
data : begin of i_y1yatt occurs 0.
include structure y1yatt.
data : end of i_y1yatt.
types: begin of t_yatt71.
include structure yatt71.
types: tcode like sy-tcode.
types: dflag type c.
types: end of t_yatt71.
data : i_yatt71 type standard table of t_yatt71
with default key with header line initial size 0.
This is code in the function module.
loop at i_y1yatt.
move-corresponding o_y1yatt to i_yatt71.
if i_y1yatt-werks eq 'N501'.
move space to i_yatt71-werks.
endif.
append i_yatt71.
" Here this internal contains the previous entry
clear i_yatt71.
endloop.
This function module is called 25 times in a minute.
My problem is this
For example : 1st tranmission is called this fm with 50 records,
and 2nd tranmission is called fm with 10 records.
My results are showing
last record in the 1st transmission is still on the memory while calling 2nd transmission. ( Here in int table I_YATT71 still contains the 1st transmission's last records during the 2nd tranmission call)
As per my knowledge if each time calls comes in to fm all gloabl variables get cleared. but some how this not happening.
Anybody come across this scenario.
PS. I know i need to use clear statement within the loop as first statement.
a®You must understand that when calling a FM, you load the entire function group into memory. IF there are global variables, then they are "alive" for the entire duration of the program execution. Meaning if you call the function numerious times, or even if you call another function within the same function group, the functions still have access to that same global variable space, so it must always be cleared manually by the developer at the required points. You can not rely on the runtime to clear the global variables at the end of the function call. So you should clear all you globals as the first operation in your function module call, if that is what is required.
Is this clear?
Regards,
Rich Heilman -
Hi,
I have to create/change BOM for multiple plants and i am using below code, but it is not working. I think i am not passing the parameter values properly. Can anyone help me in how to use the below function modules in loop(i mean for multiple plants)?
* CHANGE Bom
CALL FUNCTION 'CS_BC_BOM_CHANGE_BATCH_INPUT'
EXPORTING
* BDC_FLAG = ' '
bom_header = ls_bom_header
close_group = 'X'
commit_work = 'X'
group_data = ls_group
new_group = 'X'
tcode_mode = ld_mode
tcode_update = 'S'
IMPORTING
msgid = ld_msgid
msgno = ld_msgno
msgty = ld_msgty
msgv1 = ld_msgv1
msgv2 = ld_msgv2
msgv3 = ld_msgv3
msgv4 = ld_msgv4
TABLES
bom_item = lt_bom_item
bom_sub_item = lt_sub_item.
* CREATE Bom
CALL FUNCTION 'CS_BI_BOM_CREATE_BATCH_INPUT1'
EXPORTING
* BDC_FLAG = ' '
bom_header = ls_bom_header
close_group = 'X'
commit_work = 'X'
group_data = ls_group
new_group = 'X'
tcode_mode = ld_mode
tcode_update = 'S'
IMPORTING
msgid = ld_msgid
msgno = ld_msgno
msgty = ld_msgty
msgv1 = ld_msgv1
msgv2 = ld_msgv2
msgv3 = ld_msgv3
msgv4 = ld_msgv4
TABLES
bom_item = lt_bom_item
bom_sub_item = lt_sub_item.Hi Kanishak,
Thanks for your reply. I am able to create/change bom using the FMs CS_BC_BOM_CHANGE_BATCH_INPUT & CS_BI_BOM_CREATE_BATCH_INPUT1 when i process the IDoc manually in SAP system.
But in my current situation Idoc will be proceed from third party system automatically. During that time it is not updating and getting the IDoc status as 51. and when i process the same Idoc which is having 51 manually in SAP, it was processed and updated the BOM and the status went to 53.
This is the problem i am facing. Kindly provide me an alternative solution. -
Standard function module inside a loop.
Hi Experts,
I am trying to improve performance program that has a standard abap function module inside a loop. I am some what lost on what to do here. Here below is what the code looks like as of now. I have read that i need to try and not use the function module at all be it is a very complicated function module. Any suggestions will be appreciated.
DATA: tl_retorno TYPE bapireturn1 OCCURS 0 WITH HEADER LINE. "Retorno
DATA: wl_bukrs LIKE acct_det_bf-comp_code, "Empresa
wl_process LIKE acct_det_bf-process, "Chave
wl_symko LIKE hrpp_acct_det-symb_acct, "Conta Simbólica
wl_momag LIKE hrpp_acct_det-eg_acct_det, "Agrupamento
wl_razao LIKE acct_det_bf-gl_account. "Conta Razão
*--> <--*
SORT tg_rubcr BY bukrs lgart.
LOOP AT tg_rubcr.
CLEAR: wl_bukrs, wl_process, wl_symko, wl_momag, wl_razao.
wl_bukrs = tg_rubcr-bukrs.
wl_process = tg_rubcr-process.
wl_symko = tg_rubcr-symko.
CLEAR tg_aux.
IF tg_rubcr-u_momag IS INITIAL. "A rubrica necessita de agrupamento?
CLEAR wl_momag.
* Busca Contas Razão sem Agrupamento de Empregados
CALL FUNCTION 'HRPP_FI_ACCT_DET_HR'
EXPORTING
companycode = wl_bukrs
process = wl_process
symb_acct = wl_symko
eg_acct_det = wl_momag
add_modif = ' '
IMPORTING
gl_account_debit = wl_razao
* GL_ACCOUNT_CREDIT =
* POSTING_KEY_DEBIT =
* POSTING_KEY_CREDIT =
* ACCOUNT_TYPE =
TABLES
return_tab = tl_retorno.
tg_rubcr-razao = wl_razao.
tg_aux = tg_rubcr.
APPEND tg_aux.
ELSE. "Não necessita de agrupamento de empregado?
LOOP AT tg_t52em. "Para todos os agrupamentos
CLEAR tg_aux.
CLEAR tl_retorno.
REFRESH tl_retorno.
CLEAR wl_momag.
wl_momag = tg_t52em-momag.
* Busca Contas Razão com Agrupamento de Empregados
CALL FUNCTION 'HRPP_FI_ACCT_DET_HR'
EXPORTING
companycode = wl_bukrs
process = wl_process
symb_acct = wl_symko
eg_acct_det = wl_momag
add_modif = ' '
IMPORTING
gl_account_debit = wl_razao
* GL_ACCOUNT_CREDIT =
* POSTING_KEY_DEBIT =
* POSTING_KEY_CREDIT =
* ACCOUNT_TYPE =
TABLES
return_tab = tl_retorno.
tg_rubcr-razao = wl_razao.
tg_aux = tg_rubcr.
tg_aux-momag = tg_t52em-momag.
APPEND tg_aux.
ENDLOOP.
ENDIF.
ENDLOOP.
* Limpa tabela com rubricas e move todo o conteúdo da auxiliar
REFRESH tg_rubcr.
CLEAR tg_rubcr.
tg_rubcr[] = tg_aux[].
ENDFORM. " busca_conta_razaoHi Patrick,
If you do not want to use the function module then the other option that you can use is do selects from the tables that the FM 'HRPP_FI_ACCT_DET_HR' is using to get the importing "parameter gl_account_debit = wl_razao" outside the loop.
So steps will be:
Debug FM 'HRPP_FI_ACCT_DET_HR' to find out how it getting importing data using exporting parameters.
Then before the loop is called do a select for all entries on table tg_rubcr. And id muliple tables are used Read statements to populate a final table with gl_account_debit = wl_razao value.
Then use the final table to get this value inside the loop.
Please let me know if you need more details. -
Function module PTRA_WEB_EXPENSE_REPORT_GET_2 not working when used in loop
Hi All,
I have used a function module PTRA_WEB_EXPENSE_REPORT_GET_2 in a custom fumction module which i am developing fetch the travel expense data . The function module PTRA_WEB_EXPENSE_REPORT_GET_2 returns the travel expense data based on the employee and the trip number. I want to fetch the travel expense data for a given set of employees and trip number and hence i have used this function module inside a loop statement.
The function module returns the travel expense data for the employee and trip in the first loop pass. From the second loop passs it doesn't return the value. I have also checked this in se37 and the same thing happens. Value is returned for the fist employee but for the next employee we have to go to initial screen of se37 and execute the Func. module again.
I debugged this function module and found that the value of the employee and the trip number is stored in the global variable. The value passed for the employee and trip is compared with the correspomding value in the global variable and if they are not same an error message is returned. Since we are using in a loop , each time a different value is passed for the employee and trip and the check fails .
Is there any way to clear the value in the global parameters or is there any other function module which can be used to clear the values of the global variables?
Thanks!
Regards
Manipal ParkalaHello Archana,
May be we can try several ways...
1) can you try calling function module BUFFER_REFRESH_ALL ??
after each call...
2) May be u can call Function module "PTRA_WEB_EXPENSE_REPORT_GET_2 " in background task or seperate task , it will load the function group everytime when u call it in loop.
***DO let us know if it does not work.
thanks
~Raj -
Function module called within a loop seems to carry over global data
Hello all,
I am calling FM "RS_COVERPAGE_SELECTIONS" inside of a loop of all variants for a program and then writing the variant values to spool. If only one variant is entered on the selection screen, all the values are correct. If nothing is entered, some of the variant values are carried over from a previous variant. I am emptying the internal table returned by the FM every time before the FM executes.
Would some one be willing to run the following code for a program with many screen fields and many variants and tell me if they get the same behavior?
Thanks
Bruce
REPORT zzzz.
tables: varid, varit.
parameters: p_pgm type progname obligatory default 'ZFAPI004'.
select-options: s_var for varid-variant.
parameters: p_varval as checkbox default 'X'.
data: begin of reptab occurs 0,
report like varid-report,
variant like varid-variant,
ename like varid-ename,
edat like varid-edat,
etime like varid-etime,
aename like varid-aename,
aedat like varid-aedat,
aetime like varid-aetime,
vtext like varit-vtext,
end of reptab.
data: begin of tab_sel_options occurs 0,
flag(1) type c,
olength type x,
line like rsvar-infoline,
end of tab_sel_options.
*>> At Selection-Screen data items <<
data: w_pgm like sy-repid.
data: itab like rseui_f4 occurs 0 with header line.
data: dyname like d020s-prog value sy-repid,
dynumb like d020s-dnum value '1000'.
data: begin of dynpfields occurs 3.
include structure dynpread.
data: end of dynpfields.
data: w_tabix like sy-tabix.
data: begin of i_var occurs 0,
variant like varit-variant,
vtext like varit-vtext.
data: end of i_var.
start-of-selection.
format intensified on.
write: / p_pgm.
select * from varid
where report = p_pgm
and variant in s_var.
select single * from varit
where langu = 'E' and report = p_pgm
and variant = varid-variant.
move-corresponding varid to reptab.
move-corresponding varit to reptab.
append reptab.
endselect.
sort reptab by variant.
skip 1.
format color col_heading.
write: /03 'Variant',
18 'Create',
47 'Modify',
76 'Description'.
format color off.
skip 2.
loop at reptab.
format color col_total.
write: /3 reptab-variant,
reptab-ename(8),
reptab-edat,
reptab-etime,
reptab-aename(8),
reptab-aedat,
reptab-aetime,
reptab-vtext.
format color off.
skip 1.
if p_varval = 'X'.
clear tab_sel_options. " header
refresh tab_sel_options. " lines
call function 'RS_COVERPAGE_SELECTIONS'
exporting
report = reptab-report
variant = reptab-variant
no_import = ' '
tables
infotab = tab_sel_options
exceptions
error_message = 1
variant_not_found = 2
others = 3.
loop at tab_sel_options.
if sy-tabix < 7.
continue.
endif.
write: / tab_sel_options-line.
endloop.
skip 1.
endif. " p_varval = 'X'.
endloop.Hi
Try using the function module PRINT_SELECTIONS, within this FM, the FM RS_COVERPAGE_SELECTIONS is being called. So it will not copy the previous values.
Pass Mode as 'A' , report name and variant name, then it will display the same output.
Please try it
Shiva -
Can we call a Function Module with in a loop
Hi,
Can we call a Function Module within a loop . Does it reduces the performance.
Can you please guide regarding this.
With Best Regards
Mamatha.hi Mamatha,
You can call .. but it is better to avoid calling it within a loop...
Loop at it_tab.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = it_tab-vbeln.
importing
output = it_tab-vbeln.
endloop.
Regards,
Santosh
Message was edited by:
Santosh Kumar Patha -
Calling Function Module RV_ORDER_FLOW_INFORMATION in a Loop!
Hi Guys,
I need to fetch SD document Flow data into Bw for which I have created an Extractor using function modules. I am using a Standard FM "RV_ORDER_FLOW_INFORMATION" which is called in the LOOP as below.
LOOP AT VIT_VBRK INTO VFL_VBRK.
CLEAR VBCO6.
VBCO6-MANDT = SY-MANDT.
VBCO6-VBELN = VFL_VBRK-VBELN.
REFRESH TVBFA_TAB[].
CLEAR TVBFA_TAB.
CALL FUNCTION 'RV_ORDER_FLOW_INFORMATION'
EXPORTING
AUFBEREITUNG = '2'
BELEGTYP = VFL_VBRK-VBTYP
COMWA = VBCO6
NACHFOLGER = 'X'
N_STUFEN = '50'
VORGAENGER = 'X'
V_STUFEN = '50'
IMPORTING
BELEGTYP_BACK = BELEG_TYP
TABLES
VBFA_TAB = TVBFA_TAB
EXCEPTIONS
NO_VBFA = 1
NO_VBUK_FOUND = 2
OTHERS = 3
IF SY-SUBRC <> 0.
ENDIF.
*OTHER CODE LOGIC*
ENDLOOP.
Now the problem is if I run this only once, i.e VIT_VBRK having only 1 document, the result I get is correct. However, if this same code is run in a LOOP with many different values in VIT_VBRK, the first Loop gives correct values and all subsequent values (value of TVBFA_TAB- RFMNG to be precise) are incorrect.
I am guessing this is b'coz of some internal tables and work areas specific to the function module are not refreshed and the values of earlier iterations are adding up in the subsequent runs. can any one tell me if theres any specific 'REFRESH' statement or FM to be called before calling this FM.
Thanks in Advance,
Parth Shah.Hi Matt,
I debugged the Function module like u said in 2 different Session, what I found was that there is a yet another function module called with in the FM RV_ORDER_FLOW_INFORMATION, i.e "GET_HANDLE_SD_DOCUMENTFLOW_SP" heres what the code in this FM looks like.
FUNCTION GET_HANDLE_SD_DOCUMENTFLOW_SP.
*"Lokale Schnittstelle:
*" EXPORTING
*" REFERENCE(HANDLE) TYPE REF TO IF_EX_BADI_SD_DOCUMENTFLOW
*" VALUE(ACTIVE) TYPE XFELD
IF L_HANDLE_SD_DOCUMENTFLOW IS INITIAL.
CALL METHOD CL_EXITHANDLER=>GET_INSTANCE
IMPORTING
ACT_IMP_EXISTING = BADI_SD_DOCUMENTFLOW_ACTIVE
CHANGING
INSTANCE = L_HANDLE_SD_DOCUMENTFLOW
EXCEPTIONS
OTHERS = 1.
IF NOT SY-SUBRC = 0.
CLEAR BADI_SD_DOCUMENTFLOW_ACTIVE.
ENDIF.
ENDIF.
HANDLE = L_HANDLE_SD_DOCUMENTFLOW.
ACTIVE = BADI_SD_DOCUMENTFLOW_ACTIVE.
ENDFUNCTION.
the only difference I found in the two sessions was that L_HANDLE_SD_DOCUMENTFLOW is initial in the first run and then in all subsequent run its value remains the same, while in fact it should reset. Sadly there is no REFRESH procedure / Subroutine for it.
Any idea how i can refresh it, or may be by-pass this check (IF L_HANDLE_SD_DOCUMENTFLOW IS INITIAL) ?
Edited by: shahparth on Feb 17, 2011 8:39 AM -
How to attached class or function module in FD03
Hi Guys
I want to attached CL_ATTACHMENT_LIST for retriving attachment list from fd03 please help to attached the function module in my program?
regards
Piroz
report zfir_aged_debtors no standard page heading
line-size 255.
Type group
type-pools:
slis. " ALV types
Tables
tables:
adrc, " Addresses
bsad, " Accounting: Customer secondary index (Cleared)
bsid, " Accounting: Customer secondary index (Open)
kna1, " Customer master: General data
knkk, " Customer master: Credit management
knvk. " Customer master: Contact persons
Types
types:
begin of ty_bsadbsid,
bukrs like bsad-bukrs, " Company code
kunnr like bsad-kunnr, " Customer
gjahr like bsad-gjahr, " Fiscal year
belnr like bsad-belnr, " Accounting document number
buzei like bsad-buzei, " Line item
budat like bsad-budat, " Posting date
bldat like bsad-bldat, " Document date
waers like bsad-waers, " Currency
xblnr like bsad-xblnr, " Reference
shkzg like bsad-shkzg, " Debit/credit indicator
dmbtr like bsad-dmbtr, " Amount
zfbdt like bsad-zfbdt, " Baseline date for due date
" calculation
zbd1t like bsad-zbd1t, " Cash discount days 1
zbd2t like bsad-zbd2t, " Cash discount days 2
zbd3t like bsad-zbd3t, " Net payment terms period
rebzg like bsad-rebzg, " Number of the invoice
rebzt like bsad-rebzt, " Follow on document type
end of ty_bsadbsid,
ty_it_bsadbsid type ty_bsadbsid occurs 0,
begin of ty_merged,
kunnr like kna1-kunnr, " Customer number
name1 like adrc-name1, " Name
city1 like adrc-city1, " City
post_code1 like adrc-post_code1, " Post code
street like adrc-street, " Street
house_num1 like adrc-house_num1, " House number
tel_number like adrc-tel_number, " Telephone number
fax_number like adrc-fax_number, " Fax number
namev like knvk-namev, " First name
namew like knvk-name1, " Last name
telf1 like knvk-telf1, " Telephone number
klimk like knkk-klimk, " Credit limit
skfor like knkk-skfor, " Total receivables
total like bsad-dmbtr, " Total amount
rast1 like bsad-dmbtr, " Amount period 1
rast2 like bsad-dmbtr, " Amount period 2
rast3 like bsad-dmbtr, " Amount period 3
rast4 like bsad-dmbtr, " Amount period 4
rast5 like bsad-dmbtr, " Amount period 5
rast6 like bsad-dmbtr, " Amount period 6
end of ty_merged,
ty_it_merged type ty_merged occurs 0.
Internal tables
data:
Internal table to store customer line items from BSAD and BSID
it_bsadbsid type ty_it_bsadbsid,
Internal table to store field catalog for ALV function call
it_fieldcat type slis_t_fieldcat_alv,
Internal table to store summarised data for report output
it_merged type ty_it_merged.
Structures
data:
Display variant structures
st_tvariant like disvariant,
st_variant like disvariant.
Constants
constants:
co_delim_dash type c
value '-',
co_false type c " False
value space,
co_koart_d like faede-koart " Customer account type
value 'D',
co_save_u type c " User display variant
value 'U', " saving allowed.
co_shkzg_h like bsid-shkzg " Debit/Credit indicator
value 'H', " for credit
co_shkzg_s like bsid-shkzg " Debit/Credit indicator
value 'S', " for debit
co_selected type c " Value of selected radio
value 'X', " button or checkbox
co_true type c " True
value co_selected.
Variables
data:
va_exit type c.
Selection screen definition
selection-screen: begin of block b1 with frame title text-001.
select-options:
s_kunnr for bsad-kunnr. " Customer number
parameters:
p_kkber like knkk-kkber, " Credit control area
p_pafkt like knvk-pafkt, " Contact function
p_datum like sy-datum. " Report date
selection-screen: begin of line,
comment 01(30) text-006,
position pos_low.
parameters:
rastbis1 like rfpdo1-allgrogr " Due date sorted 1
default '000',
rastbis2 like rfpdo1-allgrogr " Due date sorted 2
default '000',
rastbis3 like rfpdo1-allgrogr " Due date sorted 3
default '000',
rastbis4 like rfpdo1-allgrogr " Due date sorted 4
default '000',
rastbis5 like rfpdo1-allgrogr " Due date sorted 5
default '000'.
selection-screen: end of line.
selection-screen: end of block b1,
begin of block b2 with frame title text-002.
parameters:
p_varint like disvariant-variant. " Display variant.
selection-screen: end of block b2.
Initialisation
initialization.
Provide default periods for due date sorted list.
rastbis1 = 0.
rastbis2 = 30.
rastbis3 = 60.
rastbis4 = 90.
rastbis5 = 120.
Default report date to current.
p_datum = sy-datlo.
Default credit control area to BP01.
p_kkber = 'BP01'.
At selection screen on value request for
at selection-screen on value-request for p_varint.
Provide display variant list for this program.
call function 'REUSE_ALV_VARIANT_F4'
exporting
is_variant = st_variant
i_save = co_save_u
importing
e_exit = va_exit
es_variant = st_tvariant
exceptions
not_found = 2.
if sy-subrc eq 2.
message id sy-msgid type 'S'
number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
if va_exit eq space.
st_variant = st_tvariant.
p_varint = st_tvariant-variant.
endif.
endif.
At selection screen
at selection-screen.
Load display variant.
if not p_varint is initial.
move st_variant to st_tvariant.
move p_varint to st_tvariant-variant.
call function 'REUSE_ALV_VARIANT_EXISTENCE'
exporting
i_save = co_save_u
changing
cs_variant = st_tvariant.
st_variant = st_tvariant.
else.
clear st_variant.
st_variant-report = sy-repid.
endif.
if p_kkber is initial.
Ensure credit control area is specified.
message e000(zgen) with 'Credit control area must be specified'.
endif.
if p_pafkt is initial.
Ensure contact person function is specified.
message e000(zgen) with 'Contact person function must be specified'.
endif.
Start of selection
start-of-selection.
Extract open customer items from BSID
select bukrs kunnr gjahr belnr buzei budat bldat waers xblnr shkzg
dmbtr zfbdt zbd1t zbd2t zbd3t rebzg rebzt
from bsid
into table it_bsadbsid
where kunnr in s_kunnr
and budat le p_datum.
Extracct cleared customer items from BSAD
select bukrs kunnr gjahr belnr buzei budat bldat waers xblnr shkzg
dmbtr zfbdt zbd1t zbd2t zbd3t rebzg rebzt
from bsad
appending table it_bsadbsid
where kunnr in s_kunnr
and budat le p_datum
and augdt ge p_datum.
Ensure that items were not selected twice while getting data from the
open and cleared items tables (Only if transaction occured during
report run).
sort it_bsadbsid by bukrs belnr gjahr buzei.
delete adjacent duplicates from it_bsadbsid
comparing bukrs belnr gjahr buzei.
if it_bsadbsid[] is initial.
No data found for selection
message s001(zgen).
exit.
endif.
Merge data for report output
perform merge_data tables it_bsadbsid
it_merged.
Build field catalog
perform build_field_catalog tables it_fieldcat.
Output report via ALV
perform output_report_via_alv tables it_fieldcat
it_merged.
*& Form merge_data
text
form merge_data tables pa_it_bsadbsid type ty_it_bsadbsid
pa_it_merged type ty_it_merged.
Local work areas
data:
lwa_bsadbsid type ty_bsadbsid,
lwa_merged type ty_merged.
Local structures
data:
lst_faede like faede.
Local variables
data:
lva_daysover type i,
lva_merged_tabix like sy-tabix.
loop at pa_it_bsadbsid into lwa_bsadbsid.
Lookup merged entry for customer
clear lwa_merged.
read table pa_it_merged into lwa_merged
with key kunnr = lwa_bsadbsid-kunnr
binary search.
lva_merged_tabix = sy-tabix.
if sy-subrc ne 0.
Create new merged record for customer
lwa_merged-kunnr = lwa_bsadbsid-kunnr.
Get customer details from KNA1
clear kna1.
select single *
from kna1
where kunnr eq lwa_bsadbsid-kunnr.
Get customer address details from ADRC
clear adrc.
select single *
from adrc
where addrnumber eq kna1-adrnr
and date_from le p_datum.
lwa_merged-name1 = adrc-name1.
lwa_merged-city1 = adrc-city1.
lwa_merged-post_code1 = adrc-post_code1.
lwa_merged-street = adrc-street.
lwa_merged-house_num1 = adrc-house_num1.
lwa_merged-tel_number = adrc-tel_number.
lwa_merged-fax_number = adrc-fax_number.
Get credit limit details from KNKK
clear knkk.
select single *
from knkk
where kunnr eq lwa_bsadbsid-kunnr
and kkber eq p_kkber.
lwa_merged-klimk = knkk-klimk.
lwa_merged-skfor = knkk-skfor.
Get customer contact person details from KNVK
clear knvk.
select single *
from knvk
where kunnr eq lwa_bsadbsid-kunnr
and pafkt eq p_pafkt.
lwa_merged-namev = knvk-namev.
lwa_merged-namew = knvk-name1.
lwa_merged-telf1 = knvk-telf1.
insert lwa_merged into pa_it_merged index lva_merged_tabix.
endif.
Interpret debit/credit indicator
case lwa_bsadbsid-shkzg.
when co_shkzg_h.
Credit
lwa_bsadbsid-dmbtr = 0 - lwa_bsadbsid-dmbtr.
when co_shkzg_s.
Debit
endcase.
Perform ageing
clear lst_faede.
move-corresponding lwa_bsadbsid to lst_faede.
lst_faede-koart = co_koart_d.
call function 'DETERMINE_DUE_DATE'
exporting
i_faede = lst_faede
importing
e_faede = lst_faede
exceptions
others = 1.
lva_daysover = p_datum - lst_faede-netdt.
Accumulate total.
add lwa_bsadbsid-dmbtr to lwa_merged-total.
if lva_daysover le rastbis1.
add lwa_bsadbsid-dmbtr to lwa_merged-rast1.
else.
if lva_daysover le rastbis2 or
rastbis3 is initial.
add lwa_bsadbsid-dmbtr to lwa_merged-rast2.
else.
if lva_daysover le rastbis3 or
rastbis4 is initial.
add lwa_bsadbsid-dmbtr to lwa_merged-rast3.
else.
if lva_daysover le rastbis4 or
rastbis5 is initial.
add lwa_bsadbsid-dmbtr to lwa_merged-rast4.
else.
if lva_daysover le rastbis5.
add lwa_bsadbsid-dmbtr to lwa_merged-rast5.
else.
add lwa_bsadbsid-dmbtr to lwa_merged-rast6.
endif.
endif.
endif.
endif.
endif.
Update the merged record
modify pa_it_merged from lwa_merged index lva_merged_tabix.
endloop.
endform. " merge_data
*& Form build_field_catalog
text
form build_field_catalog tables pa_it_fieldcat type slis_t_fieldcat_alv.
Local work areas
data:
lwa_fieldcat type slis_fieldcat_alv.
--WG1K903216: Start Insert-
data: v_datum type datum,
v_mdmth type datum,
v_datxt type string,
v_noday type i.
--WG1K903216: End Insert---
refresh pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'KUNNR'.
lwa_fieldcat-ref_tabname = 'KNA1'.
lwa_fieldcat-ref_fieldname = 'KUNNR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '1'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'NAME1'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'NAME1'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '2'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'CITY1'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'CITY1'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '3'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'POST_CODE1'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'POST_CODE1'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '4'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'STREET'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'STREET'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '5'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'HOUSE_NUM1'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'HOUSE_NUM1'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '6'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'TEL_NUMBER'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'TEL_NUMBER'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '7'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'FAX_NUMBER'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'FAX_NUMBER'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '8'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'NAMEV'.
lwa_fieldcat-ref_tabname = 'KNVK'.
lwa_fieldcat-ref_fieldname = 'NAMEV'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '9'.
lwa_fieldcat-seltext_l = 'Contact first name'.
lwa_fieldcat-seltext_m = 'Contact Fname'.
lwa_fieldcat-seltext_s = 'Ctct Fname'.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'NAMEW'.
lwa_fieldcat-ref_tabname = 'KNVK'.
lwa_fieldcat-ref_fieldname = 'NAME1'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '10'.
lwa_fieldcat-seltext_l = 'Contact last name'.
lwa_fieldcat-seltext_m = 'Contact Lname'.
lwa_fieldcat-seltext_s = 'Ctxt Lname'.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'TELF1'.
lwa_fieldcat-ref_tabname = 'KNVK'.
lwa_fieldcat-ref_fieldname = 'TELF1'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '11'.
lwa_fieldcat-seltext_l = 'Contact phone no.'.
lwa_fieldcat-seltext_m = 'Contact phone'.
lwa_fieldcat-seltext_s = 'Ctct Phne'.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'KLIMK'.
lwa_fieldcat-ref_tabname = 'KNKK'.
lwa_fieldcat-ref_fieldname = 'KLIMK'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '12'.
lwa_fieldcat-seltext_l = 'Credit limit'.
lwa_fieldcat-seltext_m = 'Credit limit'.
lwa_fieldcat-seltext_s = 'Crdt limit'.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'SKFOR'.
lwa_fieldcat-ref_tabname = 'KNKK'.
lwa_fieldcat-ref_fieldname = 'SKFOR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '13'.
lwa_fieldcat-seltext_l = 'Credit used'.
lwa_fieldcat-seltext_m = 'Credit used'.
lwa_fieldcat-seltext_s = 'Crdt used'.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'TOTAL'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '14'.
lwa_fieldcat-seltext_l = 'Total'.
lwa_fieldcat-seltext_m = 'Total'.
lwa_fieldcat-seltext_s = 'Total'.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'RAST1'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '15'.
--WG1K903216: Start Delete-
concatenate '<'
rastbis2
into lwa_fieldcat-seltext_l
separated by space.
--WG1K903216: End Delete---
--WG1K903216: Start Insert-
clear: v_datum,
v_datxt.
v_noday = rastbis2.
Always use the middle of the report month as a heading reference date.
concatenate p_datum+0(6) '15' into v_mdmth.
call function 'ZWAG_DATE_CALCULATOR'
exporting i_datum = v_mdmth
i_noday = v_noday
i_oprnd = '+'
importing e_datum = v_datum
exceptions invalid_operand = 1.
call function 'ZWAG_END_MONTH'
exporting i_datum = v_datum
importing e_datum = v_datum
e_datxt = v_datxt
exceptions invalid_date = 1.
concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
separated by space.
--WG1K903216: End Insert---
lwa_fieldcat-seltext_m = lwa_fieldcat-seltext_l.
lwa_fieldcat-seltext_s = lwa_fieldcat-seltext_l.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'RAST2'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '16'.
--WG1K903216: Start Delete-
concatenate rastbis1
rastbis2
into lwa_fieldcat-seltext_l
separated by co_delim_dash.
--WG1K903216: End Delete---
--WG1K903216: Start Insert-
clear: v_datum,
v_datxt.
v_noday = rastbis1.
call function 'ZWAG_DATE_CALCULATOR'
exporting i_datum = v_mdmth
i_noday = v_noday
i_oprnd = '+'
importing e_datum = v_datum
exceptions invalid_operand = 1.
call function 'ZWAG_END_MONTH'
exporting i_datum = v_datum
importing e_datum = v_datum
e_datxt = v_datxt
exceptions invalid_date = 1.
concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
separated by space.
--WG1K903216: End Insert---
lwa_fieldcat-seltext_m = lwa_fieldcat-seltext_l.
lwa_fieldcat-seltext_s = lwa_fieldcat-seltext_l.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'RAST3'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '17'.
--WG1K903216: Start Delete-
concatenate rastbis2
rastbis3
into lwa_fieldcat-seltext_l
separated by co_delim_dash.
--WG1K903216: End Delete---
--WG1K903216: Start Insert-
clear: v_datum,
v_datxt.
v_noday = rastbis2.
call function 'ZWAG_DATE_CALCULATOR'
exporting i_datum = v_mdmth
i_noday = v_noday
i_oprnd = '-'
importing e_datum = v_datum
exceptions invalid_operand = 1.
call function 'ZWAG_END_MONTH'
exporting i_datum = v_datum
importing e_datum = v_datum
e_datxt = v_datxt
exceptions invalid_date = 1.
concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
separated by space.
--WG1K903216: End Insert---
lwa_fieldcat-seltext_m = lwa_fieldcat-seltext_l.
lwa_fieldcat-seltext_s = lwa_fieldcat-seltext_l.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'RAST4'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '18'.
--WG1K903216: Start Delete-
concatenate rastbis3
rastbis4
into lwa_fieldcat-seltext_l
separated by co_delim_dash.
--WG1K903216: End Delete---
--WG1K903216: Start Insert-
clear: v_datum,
v_datxt.
v_noday = rastbis3.
call function 'ZWAG_DATE_CALCULATOR'
exporting i_datum = v_mdmth
i_noday = v_noday
i_oprnd = '-'
importing e_datum = v_datum
exceptions invalid_operand = 1.
call function 'ZWAG_END_MONTH'
exporting i_datum = v_datum
importing e_datum = v_datum
e_datxt = v_datxt
exceptions invalid_date = 1.
concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
separated by space.
--WG1K903216: End Insert---
lwa_fieldcat-seltext_m = lwa_fieldcat-seltext_l.
lwa_fieldcat-seltext_s = lwa_fieldcat-seltext_l.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'RAST5'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '19'.
--WG1K903216: Start Delete-
concatenate rastbis4
rastbis5
into lwa_fieldcat-seltext_l
separated by co_delim_dash.
--WG1K903216: End Delete---
--WG1K903216: Start Insert-
clear: v_datum,
v_datxt.
v_noday = rastbis4.
call function 'ZWAG_DATE_CALCULATOR'
exporting i_datum = v_mdmth
i_noday = v_noday
i_oprnd = '-'
importing e_datum = v_datum
exceptions invalid_operand = 1.
call function 'ZWAG_END_MONTH'
exporting i_datum = v_datum
importing e_datum = v_datum
e_datxt = v_datxt
exceptions invalid_date = 1.
concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
separated by space.
--WG1K903216: End Insert---
lwa_fieldcat-seltext_m = lwa_fieldcat-seltext_l.
lwa_fieldcat-seltext_s = lwa_fieldcat-seltext_l.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'RAST6'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '20'.
--WG1K903216: Start Delete-
concatenate '>'
rastbis5
into lwa_fieldcat-seltext_l
separated by space.
--WG1K903216: End Delete---
--WG1K903216: Start Insert-
clear: v_datum,
v_datxt.
v_noday = rastbis5.
call function 'ZWAG_DATE_CALCULATOR'
exporting i_datum = v_mdmth
i_noday = v_noday
i_oprnd = '-'
importing e_datum = v_datum
exceptions invalid_operand = 1.
call function 'ZWAG_END_MONTH'
exporting i_datum = v_datum
importing e_datum = v_datum
e_datxt = v_datxt
exceptions invalid_date = 1.
concatenate 'Due By' v_datxt into lwa_fieldcat-seltext_l
separated by space.
--WG1K903216: End Insert---
lwa_fieldcat-seltext_m = lwa_fieldcat-seltext_l.
lwa_fieldcat-seltext_s = lwa_fieldcat-seltext_l.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
endform. " build_field_catalog
*& Form output_report_via_alv
text
form output_report_via_alv
tables pa_it_fieldcat type slis_t_fieldcat_alv
pa_it_merged type ty_it_merged.
Local variables
data:
lva_repid like sy-repid,
lva_formname type slis_formname.
lva_repid = sy-repid.
lva_formname = 'USER_COMMAND'.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = lva_repid
i_callback_user_command = lva_formname
i_save = 'A'
is_variant = st_variant
it_fieldcat = pa_it_fieldcat[]
tables
t_outtab = pa_it_merged
exceptions
program_error = 1
others = 2.
endform. " output_report_via_alvHi shiva
Thanks for your help,
Can you check this coding and revert me back ASAP Please.
REPORT BDS_GOS_CONNECTION.
DATA : logical_system LIKE BAPIBDS01-log_system.
CLASSNAME LIKE BAPIBDS01-CLASSNAME
OBJKEY LIKE SWOTOBJID-objkey.
PARAMETERS: pa_lo_sys BAPIBDS01-log_system,
pa_class like BPIBDS01-CLASSNAME,
pa_objkey like swotobjidobjkey.
AT SELECTION-SCREEN.
CALL FUNCTION 'BDS_GOS_CONNECTIONS_GET'
EXPORTING
bor_id = bor_id
IMPORTING
logical_sytem = pa_lo_sys.
classname = pa_class.
objkey = pa_objkey.
EXCEPTIONS
no_objects_found = 1
internal_error = 2
internal_gos_error = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
clear v_attno1.
i_object1-typeid = 'BUS2012'.
i_object1-catid = 'BO'.
i_object1-instid = i_yItem-docno.
call method cl_gos_attachment_query=>count_for_object
exporting
is_object = i_object1
ip_arl = space
receiving
rt_stat = i_stat1.
read table i_stat1 into wa_stat1 index 1.
if sy-subrc eq c_0.
move wa_stat1-counter to v_attno1.
endif.
CALL METHOD cl_gos_attachment_query=>count_for_object
EXPORTING
is_object = object
ip_arl = space
RECEIVING
rt_stat = lt_stat.
READ TABLE lt_stat INDEX 1 into ls_stat.
count = ls_stat-counter.
*The object has to be a concatenation of your document, like this:
CONCATENATE object-instid tab-gjahr INTO object-instid.
ELSE.
CONCATENATE tab-bukrs tab-belnr tab-gjahr INTO
object-instid.
ENDIF. -
Call RFC Function Module and return 1000 records at a time
I would like to call a Remote Enabled Function Module from a non SAP system. This function module will select data from the database and return it to the calling program.
Suppose there are 100,000 records that need to be returned, but the calling module would like the data in chunks of 1000 records. Therefore the calling program would call the FM 100 times.
How do I code the function module to know on each subsequent call to grab the next chunk of 1000 records?
Let me know if additional information is needed.
Thanks,
AaronHello,
Here is how you can go for this issue:
1. Create one RFC function module with following parameter. These parameters are with respective of chunking logic.
Import: Package Size
Export: Total number of records
Changing: chunk count
Implement following logic:
1. First of you need to know how many chunks you need to fetch for that get the count of total number of records. This is one
time activity so you better maintain one flag import parameter will be set to 'X' only first call.
2. Get the number of chunk using total number of records / chunk size for e.g. 1000 / 100 so chunk count = 10.
3. Define internal chunk counter in function module which will be used to locate the correct chunk depending on the chunk
counter value sent from calling program.
4. Send first call with package size 100 and chunk count = 1, execute select statement and increment internal
chunk count check if chunk count = internal chunk count in current case chunk count = 1 so exit select statement and return
with first chunk.
5. Send second call with package size 100 and chunk count = 2. Execute select statement and check chunk count with internal
chunk counter, in current case it will be 1 so skip that data and go for next chunk of 100 records increment internal chunk
counter. In this case it will match with external chunk count = 2. load output table with that data and return to calling program.
6. Repeat step 4 until you reach last chunk.
You need to use SELECT...ENDSELECT with PACKAGE SIZE addition so for every loop it will return number of records mentioned in package size.
Hope this helps.
Thanks,
Augustin. -
What is the best way, while creating Function Module based extractor
Hi Friends,
I am Sreekanth.
I have created a Functio Module based Extractor,
To fetch data from COPA tables.
In this extracton 3 tables are getting involved.
1) CE3OP01 2) CE4OP01 and 3) CE1OP01.
Logic required is as follow:
1) get data from CE3OP01 and for all entries of this data set,
get data from CE4OP01 and CE1OP01 and finally send the data set to BW after few manupulations.
I have implemented the whole logic and its working fine in DEVELOPMENT box where data volume is less.
But the same code is timing out in Quality Box, due to huge volues of data.
Below I am copying the code that i am using . Any body can suggest me how to proceed further so that my code works with huge volumes of data.
Now I am getting the time out error while selection data from CE3IOP01 table itself.
FUNCTION /ds1/c_bw_zds_copa_recon.
""Local interface:
*" IMPORTING
*" VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*" VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*" VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*" VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*" VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*" TABLES
*" I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*" I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*" E_T_DATA STRUCTURE /DS1/FI_COPA_RECN OPTIONAL
*" EXCEPTIONS
*" NO_MORE_DATA
*" ERROR_PASSED_TO_MESS_HANDLER
PROGRAM INFORMATION *
RIEF ID.......: N/A *
PROGRAM.......: /DS1/C_BW_ZDS_COPA_RECON
PROGRAM FUNCTION: This Function Module Extracts Cost Center, Company *
Code, and all Amount fields form CE3OP01 table and sectaktbo "
* Current profitability segment (CO-PA) *
paobjnr " Profitability Segment Number (CO-PA) *
pasubnr " Profitability segment changes (CO-PA) *
bukrs " Company Code
kndnr " Customer from CE4Op01 table. *
Segrigate one record from CE3Op01 into 93 based on Value fields. *
PROGRAM TYPE..Function Module *
DEV. CLASS..../DS1/MI_01 *
LOGICAL DB.... N/A *
Conventions used in the Program *
* global variables --> g_* *
* local variables --> l_* *
* constants --> c_* *
* internal tables --> t_* *
* structures --> x_* *
* parameters --> p_* *
* select-options --> s_* *
* ranges --> r_* *
* workarea --> w_* *
* field symbol --> fs_* *
Declaration for Interface: Selection criteria
STATICS: s_s_if TYPE srsc_s_if_simple,
Maximum number of lines for DB table
ls_s_if TYPE srsc_s_if_simple, "Static Structure
counter
ls_counter_datapakid LIKE sy-tabix,"Static Counter
cursor
ls_cursor TYPE cursor,"Static Cursor.
ls_cursor1 TYPE cursor."Static Cursor.
*CONSTANTS
CONSTANTS: lc_datasource TYPE char14 VALUE 'ZDS_COPA_RECON',
" Data Source Name
lc_msgtype TYPE char1 VALUE 'E', "message type
lc_msgcls TYPE char2 VALUE 'R3', "message class
lc_msgnum TYPE char3 VALUE '009',"Message Number.
lc_001 TYPE char3 VALUE '001',
lc_b0 TYPE char2 VALUE 'B0',
lc_10 TYPE char2 VALUE '10',
lc_01 TYPE char2 VALUE '01',
lc_02 TYPE char2 VALUE '02',
lc_1 TYPE sy-tabix VALUE 1.
*Data Declaration.
DATA: lt_ce3op01 TYPE STANDARD TABLE OF x_ce3op01,
" Internal table for ce3op01
lt_ce3op02 TYPE STANDARD TABLE OF x_ce3op01,
lt_ce4op01 TYPE STANDARD TABLE OF x_ce4op01,
" Internal table for ce4op01
lw_ce3op01 TYPE x_ce3op01,
" Work area for ce3op01
lw_ce3op02 TYPE x_ce3op01, "MOD-002
lw_ce4op01 TYPE x_ce4op01,
" Work area for ce4op01
lw_e_t_data TYPE /ds1/fi_copa_recn,
" Work area for /ds1/fi_copa_recn.
*CE1op01
lt_ce1op01 TYPE STANDARD TABLE OF x_ce1op01,"Internaltable
lw_ce1op01 TYPE x_ce1op01,"Work area for CE1op01.
**CE1op01
lt_fldlist TYPE STANDARD TABLE OF lx_fldlist, "fields list
lw_fldlist TYPE lx_fldlist," FIELDS list work area
lt_flnmval TYPE STANDARD TABLE OF lx_flnmval,"table for splitting
lw_flnmval TYPE lx_flnmval,"work area for spilitting
l_index TYPE i VALUE 1, "to keep track of index.
l_len TYPE i,
l_s_no_recs TYPE sy-tabix VALUE 99,
l_s_loop_from TYPE sy-tabix, "from "MOD-002
l_s_loop_to TYPE sy-tabix, "to"MOD-002
l_norecs TYPE sy-tabix, "MOD-002
l_count TYPE sy-tabix. "MOD-002
*Field Symbols.
FIELD-SYMBOLS:
<fs_flnmval> TYPE lx_flnmval."Field symbol for fild values
Selection Ranges
RANGES: lr_bukrs FOR ce4op01-bukrs, " Range for company code
lr_versi FOR ce3op01-versi," Range for version
lr_paledger FOR ce3op01-paledger,"Range for paledger
lr_vrgar FOR ce3op01-vrgar,"Range for vrgar
lr_gjahr FOR ce3op01-gjahr,"Range for Fiscal year
lr_perbl FOR ce3op01-perbl."Range for perbl
Initialization mode (first call by SAPI) or data transfer mode
IF i_initflag = sbiwa_c_flag_on.
Initialization: check input parameters
buffer input parameters
prepare data selection
Check DataSource validity
IF ls_counter_datapakid = 0.
CASE i_dsource.
WHEN lc_datasource.
WHEN OTHERS.
IF 1 = 2. MESSAGE e009(r3). ENDIF. "#EC *
this is a typical log call. Please write every error message like this
log_write lc_msgtype "'E' "message type
lc_msgcls "'R3' "message class
lc_msgnum "'009' "message number
i_dsource "message variable 1
' '. "message variable 2
RAISE error_passed_to_mess_handler.
ENDCASE.
APPEND LINES OF i_t_select TO s_s_if-t_select.
APPEND LINES OF i_t_fields TO s_s_if-t_fields.
Fill parameter buffer for data extraction calls
ls_s_if-requnr = i_requnr.
ls_s_if-dsource = i_dsource.
ls_s_if-maxsize = i_maxsize.
ls_s_if-initflag = i_initflag.
Company Code
LOOP AT s_s_if-t_select INTO i_t_select WHERE fieldnm = c_bukrs.
MOVE: i_t_select-sign TO lr_bukrs-sign,
i_t_select-option TO lr_bukrs-option,
i_t_select-low TO lr_bukrs-low,
i_t_select-high TO lr_bukrs-high.
APPEND lr_bukrs.
ENDLOOP.
*Version (0)
*SRSC_S_IF_SIMPLE-T_SELECT
LOOP AT s_s_if-t_select INTO i_t_select WHERE fieldnm = c_versi.
LOOP AT i_t_select INTO s_s_if-t_select WHERE fieldnm = c_versi.
MOVE: i_t_select-sign TO lr_versi-sign,
i_t_select-option TO lr_versi-option,
i_t_select-low TO lr_versi-low,
i_t_select-high TO lr_versi-high.
APPEND lr_versi.
ENDLOOP.
*Currency Type (company code only)
LOOP AT s_s_if-t_select INTO i_t_select WHERE fieldnm = c_paledger.
MOVE: i_t_select-sign TO lr_paledger-sign,
i_t_select-option TO lr_paledger-option.
IF i_t_select-low = lc_b0.
MOVE lc_01 TO lr_paledger-low.
ELSEIF i_t_select-low = lc_10.
MOVE lc_02 TO lr_paledger-low.
ENDIF.
APPEND lr_paledger.
ENDLOOP.
*Record Type
LOOP AT s_s_if-t_select INTO i_t_select WHERE fieldnm = c_vrgar.
MOVE: i_t_select-sign TO lr_vrgar-sign,
i_t_select-option TO lr_vrgar-option,
i_t_select-low TO lr_vrgar-low,
i_t_select-high TO lr_vrgar-high.
APPEND lr_vrgar.
ENDLOOP.
*Fiscal Year
LOOP AT s_s_if-t_select INTO i_t_select WHERE fieldnm = c_gjahr.
MOVE: i_t_select-sign TO lr_gjahr-sign,
i_t_select-option TO lr_gjahr-option,
i_t_select-low TO lr_gjahr-low,
i_t_select-high TO lr_gjahr-high.
APPEND lr_gjahr.
ENDLOOP.
*Period Block/Year
LOOP AT s_s_if-t_select INTO i_t_select WHERE fieldnm = c_perbl.
MOVE: i_t_select-sign TO lr_perbl-sign,
i_t_select-option TO lr_perbl-option,
i_t_select-low TO lr_perbl-low,
i_t_select-high TO lr_perbl-high.
APPEND lr_perbl.
ENDLOOP.
*Value Field Name.
LOOP AT s_s_if-t_select INTO i_t_select WHERE fieldnm = c_fldnm.
MOVE:
i_t_select-sign TO gr_zfldnm-sign,
i_t_select-option TO gr_zfldnm-option,
i_t_select-low TO gr_zfldnm-low,
i_t_select-high TO gr_zfldnm-high.
APPEND gr_zfldnm.
ENDLOOP.
First data package -> OPEN CURSOR
IF ls_counter_datapakid = 0.
*Create 93 Field names in an internal table.
MOVE 'VV010' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV011' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV012' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV013' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV014' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV015' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV016' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV020' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV021' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV030' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV031' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV032' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV033' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV034' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV035' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV200' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV201' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV202' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV203' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV036' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV037' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV038' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV039' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV040' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV041' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV042' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV043' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV204' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV205' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV211' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV212' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV213' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV222' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV223' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV230' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV232' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV233' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV500' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV501' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV502' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV503' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV504' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV505' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV506' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV507' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV508' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV509' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV510' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV511' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV512' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV513' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV514' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV515' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV516' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV517' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV518' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV519' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV520' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV236' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV206' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV051' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV052' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV053' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV054' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV055' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV056' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV057' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV058' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV059' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV060' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV241' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV242' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV243' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV244' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV245' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV246' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV247' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV248' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV249' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV250' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV521' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV522' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV523' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV524' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV525' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV526' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV527' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV528' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV529' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV530' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV227' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV226' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
MOVE 'VV224' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
OPEN CURSOR WITH HOLD ls_cursor FOR
SELECT
paobjnr " Profitability Segment Number (CO-PA)
paledger " Currency type for an operating concern
vrgar " Record Type
versi " Plan version (CO-PA)
gjahr " Fiscal Year
perbl " Fiscal year/period block
pasubnr
vv010001 " List Price
vv011001 " Formula Price
vv012001 " Customer Price
vv013001 " Manual Price
vv014001 " Retail Pump Price
vv015001 " Markup
vv016001 " Net Proceeds Other
vv020001 " Excise Duty Offset
vv021001 " Duties & Government
vv030001 " Sales Discounts
vv031001 " Sales Surcharges
vv032001 " Sales Rebates
vv033001 " Agents Comm Paid
vv034001 " RBA CR Royalties
vv035001 " Other Revenues
vv200001 " Transfer PriceSupply
vv201001 " Prim Tran Tariff Sup
vv202001 " S&Handling TariffDis
vv203001 " Sec Trans Tariff Dis
vv036001 " Proceeds from Servic
vv037001 " Exchanges
vv038001 " Throughput fees
vv039001 " Output Tax Offset
vv040001 " CR comm & Oth Oil Pr
vv041001 " Supplier fees
vv042001 " RBA Fairshare Adjust
vv043001 " Contr Comm Paid IG
vv204001 " Sec Tran Tariff Supp
vv205001 " Comp Stock Obligatio
vv211001 " Prim Tran Tar Transf
vv212001 " S&Handling Tar Trans
vv213001 " Sec Trans TariffTran
vv222001 " DIS:S&Handl Tar OvUn
vv223001 " DIS:Sec Tr TarifOvUn
vv230001 " Transfer Price LSC
vv232001 " S&Handling Tar LSC
vv233001 " Sec Trans Tariff LSC
vv500001 " 3rd Party Purchases
vv501001 " Transf from Oth Sect
vv502001 " Purchases IG
vv503001 " Inter-Seg Transf Pur
vv504001 " Import Freight
vv505001 " Stock Variations
vv506001 " Other Product Cost
vv507001 " Pipeline Operat Exp
vv508001 " Primary Transp Expen
vv509001 " Manufacturing Expens
vv510001 " Supply /Process Exp
vv511001 " MK Processing Plants
vv512001 " S&Handling Expenses
vv513001 " Sec Transp Expenses
vv514001 " Point of Sale Expens
vv515001 " Contr Comm Rec IG
vv516001 " Assoc Inc Dividend
vv517001 " Marketing & Sell Exp
vv518001 " Other Rev from Dist
vv519001 " Other Rev Transferrd
vv520001 " Stock Write-Off
vv236001 " Oth cost Tar LSC SMP
vv206001 " Prim Trp tariff Dist
vv051001 " CR Net Turnover
vv052001 " Dummy Price 2
vv053001 " Dummy Price 3
vv054001 " Dummy Price 4
vv055001 " Dummy Price 5
vv056001 " Dummy Price 6
vv057001 " Dummy Price 7
vv058001 " Dummy Price 8
vv059001 " Dummy Price 9
vv060001 " Dummy Price10
vv241001 " DummyTariff 1
vv242001 " DummyTariff 2
vv243001 " DummyTariff 3
vv244001 " DummyTariff 4
vv245001 " DummyTariff 5
vv246001 " DummyTariff 6
vv247001 " DummyTariff 7
vv248001 " DummyTariff 8
vv249001 " DummyTariff 9
vv250001 " DummyTariff10
vv521001 " SD&A Rebates
vv522001 " Dummy Cost 2
vv523001 " Dummy Cost 3
vv524001 " Dummy Cost 4
vv525001 " Dummy Cost 5
vv526001 " Dummy Cost 6
vv527001 " Dummy Cost 7
vv528001 " Dummy Cost 8
vv529001 " Dummy Cost 9
vv530001 " Dummy Cost 10
vv227001 " Sec Tr TarifOvUn LSC
vv226001 " S&Handl Tar OvUn LSC
vv224001 " Pr Tra TariffOvU DIS
FROM ce3op01
WHERE paledger = lc_02 AND
vrgar IN lr_vrgar AND
versi IN lr_versi AND
perbl IN lr_perbl AND
gjahr IN lr_gjahr.
ENDIF.
For all other cursors.
FETCH NEXT CURSOR ls_cursor
APPENDING TABLE lt_ce3op02
PACKAGE SIZE ls_s_if-maxsize.
IF sy-subrc <> 0.
EXIT.
ENDIF.
SORT lt_ce3op02 BY paobjnr pasubnr paledger vrgar versi gjahr
perbl.
DELETE ADJACENT DUPLICATES FROM lt_ce3op02 COMPARING paobjnr.
*Begin of MODE-002
DESCRIBE TABLE lt_ce3op02 LINES l_norecs.
l_s_loop_from = lc_1.
DO.
l_s_loop_to = l_s_loop_from + l_s_no_recs.
LOOP AT lt_ce3op02 INTO lw_ce3op02
FROM l_s_loop_from TO l_s_loop_to .
APPEND lw_ce3op02 TO lt_ce3op01.
ENDLOOP.
SORT lt_ce3op01 BY paobjnr.
*End of MOS-002
SELECT
aktbo " Current profitability segment (CO-PA)
paobjnr " Profitability Segment Number (CO-PA)
pasubnr " Profitability segment changes (CO-PA)
kndnr " Customer
artnr
bukrs " Company Code
prctr
kokrs
FROM ce4op01
INTO TABLE lt_ce4op01
FOR ALL ENTRIES IN lt_ce3op01
WHERE paobjnr = lt_ce3op01-paobjnr AND
pasubnr = lt_ce3op01-pasubnr AND
bukrs IN lr_bukrs.
*CE1op01
SELECT
paledger
vrgar
versi
perio
paobjnr
pasubnr
belnr
posnr
rbeln
rposn
FROM ce1op01
INTO TABLE lt_ce1op01
FOR ALL ENTRIES IN lt_ce3op01
WHERE paledger = lt_ce3op01-paledger AND
vrgar = lt_ce3op01-vrgar AND
versi = lt_ce3op01-versi AND
perio = lt_ce3op01-perbl AND
paobjnr = lt_ce3op01-paobjnr AND
pasubnr = lt_ce3op01-pasubnr.
**CE1op01
LOOP AT lt_ce3op01 INTO lw_ce3op01.
MOVE:
lw_ce3op01-paobjnr TO lw_flnmval-paobjnr,
lw_ce3op01-paledger TO lw_flnmval-paledger,
lw_ce3op01-vrgar TO lw_flnmval-vrgar,
lw_ce3op01-versi TO lw_flnmval-versi,
lw_ce3op01-gjahr TO lw_flnmval-gjahr,
lw_ce3op01-perbl TO lw_flnmval-perbl.
*appending all 93 fields as records
MOVE lw_ce3op01-vv010001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv011001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv012001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv013001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv014001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv015001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv016001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv020001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv021001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv030001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv031001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv032001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv033001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv034001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv035001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv200001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv201001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv202001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv203001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv036001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv037001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv038001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv039001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv040001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv041001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv042001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv043001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv204001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv205001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv211001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv212001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv213001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv222001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv223001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv230001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv232001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv233001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv500001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv501001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv502001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv503001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv504001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv505001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv506001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv507001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv508001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv509001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv510001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv511001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv512001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv513001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv514001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv515001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv516001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv517001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv518001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv519001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv520001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv236001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv206001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv051001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv052001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv053001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv054001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv055001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv056001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv057001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv058001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv059001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv060001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv241001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv242001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv243001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv244001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv245001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv246001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv247001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv248001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv249001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv250001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv521001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv522001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv523001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv524001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv525001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv526001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv527001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv528001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv529001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv530001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv227001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv226001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
MOVE lw_ce3op01-vv224001 TO lw_flnmval-zamunt.
APPEND lw_flnmval TO lt_flnmval.
*Segrigating all one record into 102 records is complete
ENDLOOP.
LOOP AT lt_flnmval ASSIGNING <fs_flnmval>.
IF l_index > 93.
l_index = 1.
ENDIF.
READ TABLE lt_fldlist INTO lw_fldlist INDEX l_index.
IF sy-subrc = 0.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = lw_fldlist-fldnam
IMPORTING
output = <fs_flnmval>-fldnam.
ENDIF.
l_index = l_index + 1.
ENDLOOP.
SORT lt_ce4op01 BY paobjnr.
SORT lt_ce1op01 BY paobjnr paledger vrgar versi.
SORT gr_zfldnm BY low.
DELETE lt_flnmval WHERE fldnam NOT IN gr_zfldnm.
LOOP AT lt_flnmval INTO lw_flnmval.
READ TABLE lt_ce4op01 INTO lw_ce4op01 WITH KEY
paobjnr = lw_flnmval-paobjnr BINARY SEARCH.
IF sy-subrc = 0.
MOVE : lw_flnmval-paledger TO lw_e_t_data-paledger,
lw_flnmval-vrgar TO lw_e_t_data-vrgar,
lw_flnmval-versi TO lw_e_t_data-versi ,
lw_flnmval-gjahr TO lw_e_t_data-gjahr,
lw_flnmval-perbl TO lw_e_t_data-perbl,
lw_ce4op01-bukrs TO lw_e_t_data-bukrs,
lw_ce4op01-kndnr TO lw_e_t_data-kndnr,
lw_ce4op01-artnr TO lw_e_t_data-artnr,
lw_ce4op01-prctr TO lw_e_t_data-prctr,
lw_ce4op01-kokrs TO lw_e_t_data-kokrs,
lw_flnmval-fldnam TO lw_e_t_data-zfldnm,
lw_flnmval-zamunt TO lw_e_t_data-zamount.
CE1op01
READ TABLE lt_ce1op01 INTO lw_ce1op01 WITH KEY
paobjnr = lw_flnmval-paobjnr
paledger = lw_flnmval-paledger
vrgar = lw_flnmval-vrgar
versi = lw_flnmval-versi BINARY SEARCH.
IF sy-subrc = 0.
MOVE: lw_ce1op01-rbeln TO lw_e_t_data-rbeln,
lw_ce1op01-rposn TO lw_e_t_data-rposn.
ENDIF.
CE1op01
APPEND lw_e_t_data TO gt_out_data.
ENDIF.
ENDLOOP.
*Begin of MOD-002
FREE lt_flnmval.
REFRESH :lt_ce3op01,lt_ce4op01,lt_ce1op01.
e_t_data[] = gt_out_data[].
DELETE e_t_data WHERE zfldnm NOT IN gr_zfldnm.
l_s_loop_from = l_s_loop_to + lc_1.
l_count = l_count + 20.
IF l_count GE l_norecs.
EXIT.
ENDIF.
ENDDO.
*End of MOD-002
ls_counter_datapakid = ls_counter_datapakid + 1.
ENDIF. "IF S_COUNTER_DATAPAKID = 0
ELSE.
IF i_maxsize IS INITIAL.
RAISE error_passed_to_mess_handler.
ENDIF.
IF g_start IS INITIAL.
g_start = 1.
ELSE.
g_start = g_end + 1.
ENDIF.
g_end = g_start + i_maxsize - 1.
Population of E_T_DATA based on Data records size
APPEND LINES OF gt_out_data FROM g_start TO g_end TO e_t_data.
DELETE e_t_data WHERE zfldnm NOT IN gr_zfldnm.
IF e_t_data[] IS INITIAL.
RAISE no_more_data.
ENDIF.
ls_counter_datapakid = ls_counter_datapakid + 1.
ENDIF.
ENDFUNCTION.
Thanks & regards,
Sreekanth
+91 9740091981Hello Sreekanth,
See this blog [Generic Extraction via Function Module|/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module]
Also see this
[Line Item Level Data Extraction for Financial Accounting and Controlling|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a]
Thanks
Chandran -
How to log input parameters for Function Modules?
Hi,
I need to create a Logging system to trace input parameters for function modules.
The log functionality could be done by developing a class method or a function module (For example 'write_log'), and calling it within each function module that I want to log. The 'write_log' code should be independent from the interface of the Function Module that I want to log.
For example, I'd like to write a function/class method that can log both these functions modules:
Function DummyA
Input parameters: A1 type char10, A2 type char10.
Function DummyB
Input parameters: B1 type char20, B2 type char20, B3 type char20, B4 type Z_MYSTRUCTURE
Now the questions...
- Is there a "standard SAP" function that provide this functionality?
- If not, is there a system variable in which I can access runtime all parameters name, type and value for a particular function module?
- If not, how can I loop at Input parameters in a way that is independent from the function module interface?
Thank you in advance for helping!check this sample code. here i am capturing only parameters (import) values. you can extend this to capture tables, changin, etc.
FUNCTION y_test_fm.
*"*"Local Interface:
*" IMPORTING
*" REFERENCE(PARAM1) TYPE CHAR10
*" REFERENCE(PARAM2) TYPE CHAR10
*" REFERENCE(PARAM3) TYPE CHAR10
DATA: ep TYPE STANDARD TABLE OF rsexp ,
ip TYPE STANDARD TABLE OF rsimp ,
tp TYPE STANDARD TABLE OF rstbl ,
el TYPE STANDARD TABLE OF rsexc ,
vals TYPE tihttpnvp ,
wa_vals TYPE ihttpnvp ,
wa_ip TYPE rsimp .
FIELD-SYMBOLS: <temp> TYPE ANY .
CALL FUNCTION 'FUNCTION_IMPORT_INTERFACE'
EXPORTING
funcname = 'Y_TEST_FM'
* INACTIVE_VERSION = ' '
* WITH_ENHANCEMENTS = 'X'
* IGNORE_SWITCHES = ' '
* IMPORTING
* GLOBAL_FLAG =
* REMOTE_CALL =
* UPDATE_TASK =
* EXCEPTION_CLASSES =
TABLES
exception_list = el
export_parameter = ep
import_parameter = ip
* CHANGING_PARAMETER =
tables_parameter = tp
* P_DOCU =
* ENHA_EXP_PARAMETER =
* ENHA_IMP_PARAMETER =
* ENHA_CHA_PARAMETER =
* ENHA_TBL_PARAMETER =
* ENHA_DOCU =
EXCEPTIONS
error_message = 1
function_not_found = 2
invalid_name = 3
OTHERS = 4
IF sy-subrc = 0.
LOOP AT ip INTO wa_ip .
MOVE: wa_ip-parameter TO wa_vals-name .
ASSIGN (wa_vals-name) TO <temp> .
IF <temp> IS ASSIGNED .
wa_vals-value = <temp> .
ENDIF .
APPEND wa_vals TO vals .
ENDLOOP .
ENDIF.
ENDFUNCTION. -
How to take back the control from RFC function module to calling program
Hi,
In our system landscape, more than 200 child systems are connected to Solution manager(SMP). I have copied a RFC enabled function module into all the child systems and calling that FM from Sol Man in sychronous mode.
Here goes my code in SolMan.
LOOP AT it_dest INTO wa_dest.
CALL FUNCTION 'Z_GET_LOGIN_DETAILS' DESTINATION wa_dest-rfcdest
EXPORTING
date_fr = s_date-low
date_to = s_date-high
TABLES
tab_data = it_val
EXCEPTIONS
communication_failure = 1
system_failure = 2
OTHERS = 3.
IF sy-subrc EQ 0.
* Updates zuserlogon
MODIFY zt_logon_det FROM TABLE it_val.
COMMIT WORK.
WRITE:/'RFC for Destination', wa_dest-rfcdest, 'succesfully updated.'.
ELSE.
WRITE:/'RFC for Destination', wa_dest-rfcdest, ' failed.'.
ENDIF.
ENDLOOP.
Few child systems are very slow & takes more than 20 minutes(Many of the times system hangs) to return the result. But I should not wait for so long. Even if the child system doesn't return any values in 5 minutes I shoud continue with other system ignoring the current one.
I tried calling the FM in asynchronous mode(STARTING NEW TASK) but no success because only 6 DIA processes possible but as I said I have more than 200 systems connected to SolMan.
Please help me resolving this problem.
Thanks,
PrathapIf there are only few child systems with bad response time, use asynchronous call using a CALL FUNCTION func STARTING NEW TASK task DESTINATION dest PERFORMING subr or CALLING meth ON END OF TASK. Count asynchronous calls still running/waiting (increment a counter when creating a task (not the one used for task id). In the form/method performed at end of a call decrement the counter. When counter is lower than a limit, 4-5 if 6 processes (*), perform an asynchronous call else perform a synchronous call or wait until the counter falls below the limit.
Regards,
Raymond
(*) Use SPBT_INITIALIZE at start of program to get actual number of free/available processes. -
Upload data from excel with vba by calling a function module
Hello all,
i have a problem with the function module "ALSM_EXCEL_TO_INTERNAL_TABLE". I will call this function module with vba to load data from excel to sap with a Buttonclick. I have copied this function module and set it remotable. But i can´t call it from excel.
Can you give me some tips how can i
upload data from excel with vba by click a button.
The problem seems the function: call method cl_gui_frontend_services=>clipboard_import in the function module, because when i comment this function call the vba-call is true but no results.
How can I call the function module correct with vba?
Thanks a lot for your tips!!!!
Chris
Message was edited by:
Christoph KirschnerHI
Uploading data directly from Excel file format
* Upload data direct from excel.xls file to SAP
REPORT ZEXCELUPLOAD.
PARAMETERS: filename LIKE rlgrap-filename MEMORY ID M01,
begcol TYPE i DEFAULT 1 NO-DISPLAY,
begrow TYPE i DEFAULT 1 NO-DISPLAY,
endcol TYPE i DEFAULT 100 NO-DISPLAY,
endrow TYPE i DEFAULT 32000 NO-DISPLAY.
* Tick don't append header
PARAMETERS: kzheader AS CHECKBOX.
DATA: BEGIN OF intern OCCURS 0.
INCLUDE STRUCTURE alsmex_tabline.
DATA: END OF intern.
DATA: BEGIN OF intern1 OCCURS 0.
INCLUDE STRUCTURE alsmex_tabline.
DATA: END OF intern1.
DATA: BEGIN OF t_col OCCURS 0,
col LIKE alsmex_tabline-col,
size TYPE i.
DATA: END OF t_col.
DATA: zwlen TYPE i,
zwlines TYPE i.
DATA: BEGIN OF fieldnames OCCURS 3,
title(60),
table(6),
field(10),
kz(1),
END OF fieldnames.
* No of columns
DATA: BEGIN OF data_tab OCCURS 0,
value_0001(50),
value_0002(50),
value_0003(50),
value_0004(50),
value_0005(50),
value_0006(50),
value_0007(50),
value_0008(50),
value_0009(50),
value_0010(50),
value_0011(50),
value_0012(50),
value_0013(50),
value_0014(50),
value_0015(50),
value_0016(50),
value_0017(50),
value_0018(50),
value_0019(50),
value_0020(50),
value_0021(50),
value_0022(50),
value_0023(50),
value_0024(50),
value_0025(50),
value_0026(50),
value_0027(50),
value_0028(50),
value_0029(50),
value_0030(50),
value_0031(50),
value_0032(50),
value_0033(50),
value_0034(50),
value_0035(50),
value_0036(50),
value_0037(50),
value_0038(50),
value_0039(50),
value_0040(50),
value_0041(50),
value_0042(50),
value_0043(50),
value_0044(50),
value_0045(50),
value_0046(50),
value_0047(50),
value_0048(50),
value_0049(50),
value_0050(50),
value_0051(50),
value_0052(50),
value_0053(50),
value_0054(50),
value_0055(50),
value_0056(50),
value_0057(50),
value_0058(50),
value_0059(50),
value_0060(50),
value_0061(50),
value_0062(50),
value_0063(50),
value_0064(50),
value_0065(50),
value_0066(50),
value_0067(50),
value_0068(50),
value_0069(50),
value_0070(50),
value_0071(50),
value_0072(50),
value_0073(50),
value_0074(50),
value_0075(50),
value_0076(50),
value_0077(50),
value_0078(50),
value_0079(50),
value_0080(50),
value_0081(50),
value_0082(50),
value_0083(50),
value_0084(50),
value_0085(50),
value_0086(50),
value_0087(50),
value_0088(50),
value_0089(50),
value_0090(50),
value_0091(50),
value_0092(50),
value_0093(50),
value_0094(50),
value_0095(50),
value_0096(50),
value_0097(50),
value_0098(50),
value_0099(50),
value_0100(50).
DATA: END OF data_tab.
DATA: tind(4) TYPE n.
DATA: zwfeld(19).
FIELD-SYMBOLS: <fs1>.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR filename.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
mask = '*.xls'
static = 'X'
CHANGING
file_name = filename.
START-OF-SELECTION.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = filename
i_begin_col = begcol
i_begin_row = begrow
i_end_col = endcol
i_end_row = endrow
TABLES
intern = intern
EXCEPTIONS
inconsistent_parameters = 1
upload_ole = 2
OTHERS = 3.
IF sy-subrc <> 0.
WRITE:/ 'Upload Error ', SY-SUBRC.
ENDIF.
END-OF-SELECTION.
LOOP AT intern.
intern1 = intern.
CLEAR intern1-row.
APPEND intern1.
ENDLOOP.
SORT intern1 BY col.
LOOP AT intern1.
AT NEW col.
t_col-col = intern1-col.
APPEND t_col.
ENDAT.
zwlen = strlen( intern1-value ).
READ TABLE t_col WITH KEY col = intern1-col.
IF sy-subrc EQ 0.
IF zwlen > t_col-size.
t_col-size = zwlen.
* Internal Table, Current Row Index
MODIFY t_col INDEX sy-tabix.
ENDIF.
ENDIF.
ENDLOOP.
DESCRIBE TABLE t_col LINES zwlines.
SORT intern BY row col.
IF kzheader = 'X'.
LOOP AT intern.
fieldnames-title = intern-value.
APPEND fieldnames.
AT END OF row.
EXIT.
ENDAT.
ENDLOOP.
ELSE.
DO zwlines TIMES.
WRITE sy-index TO fieldnames-title.
APPEND fieldnames.
ENDDO.
ENDIF.
SORT intern BY row col.
LOOP AT intern.
IF kzheader = 'X'
AND intern-row = 1.
CONTINUE.
ENDIF.
tind = intern-col.
CONCATENATE 'DATA_TAB-VALUE_' tind INTO zwfeld.
ASSIGN (zwfeld) TO <fs1>.
<fs1> = intern-value.
AT END OF row.
APPEND data_tab.
CLEAR data_tab.
ENDAT.
ENDLOOP.
CALL FUNCTION 'DISPLAY_BASIC_LIST'
EXPORTING
file_name = filename
TABLES
data_tab = data_tab
fieldname_tab = fieldnames.
*-- End of Program
<b>Excel Upload Alternative - KCD_EXCEL_OLE_TO_INT_CONVERT</b>
*Title : Excel Uploading
TYPES: BEGIN OF t_datatab,
col1(25) TYPE c,
col2(30) TYPE c,
col3(30) TYPE c,
col4(30) TYPE c,
col5(30) TYPE c,
col6(30) TYPE c,
col7(30) TYPE c,
col8(30) TYPE c,
col9(30) TYPE c,
col10(30) TYPE c,
col11(30) TYPE c,
END OF t_datatab.
DATA: it_datatab TYPE STANDARD TABLE OF t_datatab INITIAL SIZE 0,
wa_datatab TYPE t_datatab.
Data : p_table type t_datatab occurs 0 with header line.
DATA : gd_scol TYPE i VALUE '1',
gd_srow TYPE i VALUE '1',
gd_ecol TYPE i VALUE '256',
gd_erow TYPE i VALUE '65536'.
DATA: it_tab TYPE filetable,
gd_subrc TYPE i.
field-symbols : <fs>.
*Selection screen definition
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_file LIKE rlgrap-filename
DEFAULT 'c:test.xls' OBLIGATORY. " File Name
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
REFRESH: it_tab.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
EXPORTING
window_title = 'Select File'
default_filename = '*.xls'
multiselection = ' '
CHANGING
file_table = it_tab
rc = gd_subrc.
LOOP AT it_tab INTO p_file.
* so_fpath-sign = 'I'.
* so_fpath-option = 'EQ'.
* append so_fpath.
ENDLOOP.
START-OF-SELECTION.
PERFORM upload_excel_file TABLES it_datatab
USING p_file
gd_scol
gd_srow
gd_ecol
gd_erow.
* END-OF-SELECTION.
END-OF-SELECTION.
LOOP AT it_datatab INTO wa_datatab.
WRITE:/ wa_datatab-col1,
wa_datatab-col2,
wa_datatab-col3,
wa_datatab-col4,
wa_datatab-col5,
wa_datatab-col6,
wa_datatab-col7,
wa_datatab-col8,
wa_datatab-col9,
wa_datatab-col10,
wa_datatab-col11.
ENDLOOP.
*& Form UPLOAD_EXCEL_FILE
* upload excel spreadsheet into internal table
* -->P_TABLE Table to return excel data into
* -->P_FILE file name and path
* -->P_SCOL start column
* -->P_SROW start row
* -->P_ECOL end column
* -->P_EROW end row
FORM upload_excel_file TABLES p_table
USING p_file
p_scol
p_srow
p_ecol
p_erow.
DATA : lt_intern TYPE kcde_cells OCCURS 0 WITH HEADER LINE.
* Has the following format:
* Row number | Colum Number | Value
* i.e. 1 1 Name1
* 2 1 Joe
DATA : ld_index TYPE i.
* Note: Alternative function module - 'ALSM_EXCEL_TO_INTERNAL_TABLE'
CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
EXPORTING
filename = p_file
i_begin_col = p_scol
i_begin_row = p_srow
i_end_col = p_ecol
i_end_row = p_erow
TABLES
intern = LT_INTERN
EXCEPTIONS
inconsistent_parameters = 1
upload_ole = 2
OTHERS = 3.
IF sy-subrc <> 0.
FORMAT COLOR COL_BACKGROUND INTENSIFIED.
WRITE:/ 'Error Uploading file'.
EXIT.
ENDIF.
IF lt_intern[] IS INITIAL.
FORMAT COLOR COL_BACKGROUND INTENSIFIED.
WRITE:/ 'No Data Uploaded'.
EXIT.
ELSE.
SORT lt_intern BY row col.
LOOP AT lt_intern.
MOVE lt_intern-col TO ld_index.
assign component ld_index of structure
p_table to <fs>.
move : lt_intern-value to <fs>.
* MOVE lt_intern-value TO p_table.
AT END OF row.
APPEND p_table.
CLEAR p_table.
ENDAT.
ENDLOOP.
ENDIF.
ENDFORM. "UPLOAD_EXCEL_FILE
Regards
Pavan -
How can i get currency values from flatfile to function module
Dear All,
I have to take currency values from flat file and i have to assign those flat file value to function module .
Eg: "Convert_to_local_currency". I need technical code how to calculate those amount in work area and how to assign those amount value function module.
I need sample program for currency conversion from flat file to function module. My requirement is based on flat file amount i have to calculate in work area and assign those work area to function module.
With Regards,
BaskaranHi Satish or Baskaran,
First conform in which format the flat file is present, as abhi mentioned if it is there in notepad
try to use F.M GUI_UPLOAD as shown below...
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'C:\Desktop\rpf1.TXT'
TABLES
DATA_TAB = ITAB.
Now loop at ITAB Into Work_area and press the respect currency fields which you want and in the same way
if the file is in EXCEL format use F.M ALSM_EXCEL_TO_INTERNAL_TABLE
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = P_FNAME
i_begin_col = 1
i_begin_row = 1
TABLES
intern = ITAB
LOOP AT ITAB INTO WA.
CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY'
EXPORTING
foreign_currency = wa-waers
local_currency = wa-waers
IMPORTING
local_amount = tvals-gross.
ENDIF.
endloop.
And as mentioned loop the records into work area and process the currenct field which is present in the
ITAB according to its field name. And make sure within the loop you call your function module.
Regards
VEnk@
Edited by: Venkat Reddy on Dec 9, 2009 5:51 PM
Maybe you are looking for
-
How can I split the video port of an older Mac Mini so I can use both the 922-6199 DVI to RCA, S-Video Adapter and a Cinema Display?
-
I cannot install Windows 8.1 PRO: I boot with the authentic Microsoft Windows 8.1 PRO DVD, the operating system installs without asking the activation code and when system reboots I check that Windows version is Windows 8.1. If I try to update window
-
Hello we have configured AD with OIM 9101. We have couple of groups inside AD were the user needs to be provisioned using access policy. that is working fine. Now when a user is making update to user form the user gets removed from the user group fro
-
Yosemite/Java asks me to update to latest version of Java; which is already installed!
Hello, I have a mid-2010 iMac with OS X Yosemite (10.10.2) installed on it. The issue that I'm having is that I'm getting a Software Update popup that reads: Now, how can I be asked to "update" what I ALREADY HAVE installed?? In other words it's
-
I am trying to create few report in Mircosoft SQL Server Reporting Services where DB is Oracle. I am writing all queries in Oracle and it is beign executed in Oracle. I am trying to use below Stored Procedure which i have written for a report. But wh