Function Module not released yet. Has anybody used them in their programs?

Hi
I am trying to use the barcode functionality during a goods movement 101 (using MIGO). As we donu2019t have any control of SAPu2019s barcode functionality thru configuration in MIGO I have developed a custom popup and I am calling this in a BADI implementation MB_MIGO_BADI. Once the user enters the barcode then I call Function module ARCHIV_BARCODE_GLOBAL to save the barcode to the standard tables.
This Function module is not released to the customers and it was last changed on 11/12/2004.
My question is should I be using this Function module in my BADI implementation even though it is not released (does not have a release date) ?. Has anyone of have used a unreleased Function module in your programs?.
Additionally I need this info
I am using ECC 5.0. If anyone of you is using ECC 6.0 or higher can you please check and let me know if this FM ARCHIV_BARCODE_GLOBAL is released or not or when was it last changed.
Please advice me at you earlist
Thanks of your time
SHraj

Hi,
We are not using the above FM. But I can give some Info from ECC 6.0.
In ECC 6.0 the above FM is realeased for customers.
Last changed on:28.12.2004 18:28:16.
You can use the same code in ur Z function module.
Thanks and Regards

Similar Messages

Function module not released

Hi,
I have a requirement where I need to insert/delete international versions of BP standard Address.(This is not the International Address Usage in the Address Overview tab. The international versions can be added by the international versions button in the Address tab.)
I was tryng to use the following function modules for the same:-
ADDR_VERSION_INSERT,
ADDR_VERSION_DELETE,
ADDR_SINGLE_SAVE.
I am able to do the verion insert/delete using these function modules but the problem is none of these function modules are released . I was trying to get the correct function modules by debugging the BP transaction and setting the breakpoint at the 'CALL FUNCTION' statement.Also I tried using the report program 'RS_ABAP_SOURCE_SCAN'.But none of them were successful. Also I am not able to get these information from the where-used list of the function modules.
Please let me know how to go about this.
Thanks,
Samrat.

it's not clear what is released, what is not released. If it's somewhere in the documentation, I consider it released, even though technically it is not released. See [sap library - working with the BAS|http://help.sap.com/saphelp_nw70/helpdata/EN/12/ad79815c5811d3b4ea006094192fe3/frameset.htm]. Even if not released, you may take the small risk to use it, just discuss with your project/maintenance teams.

Admission Audit Run (Action is not possible; function not released yet)

Hi All,
I have created a Requirement Profile Template for admission audit and attached it with a program of study.
But when I am trying to run the admission audit using Transaction PIQAUD_MP_CS, its giving a message that...
Action is not possible; function not released yet....
Please tell me what does this message indicate, please let me know if u need more information regarding it.
Thanks in Advance
Sudhir Gupta

Dear Michael,
Thanks for such a beautiful and elaborative answer. Please read my comments on the points you discussed :
Create an admissions record: at this time a requirement profile is automatically generated for the program of study, as long as your program has been defined as 'Use Assessments'.
Yes its generating a requirement profile automatically as soon as admission record is created.
In the student file, go to the admissions tab and look for the icon that represents 'Audit Details'. (It looks like the icon for 'syntax check' in ABAP). Click on that.
On Clicking 'Audit Details' icon it leads to another screen which contains all information like Admission application data but requirements section is blank.
Now you are taken to a screen where you can see the admissions audit profile for the student. Execute the audit there, and you will see the list of checkboxes and results.
The requirement screen is blank. No error message.
Though i maintained the Requirement Profiles and RPT as per Cookbooks.
I want to download the screen shots of Requirement Profiles and RPT. Please let me know how to upload screen shots in SDN.
Warm Regards
Vinod Kumar

Has anybody used the transaction RSUOM in 2004s?

Hello
Has anybody used the transaction RSUOM in 2004s?
Documentation found on help.sap.com states that this transaction can help dealing with alternate unit of measure conversion ("equivalent to currency conversion")
I have created a quantity conversion type in RSUOM but I have not found how to use it - is it in the update rules or the Bex or somewhere else.
Any thoughts?
Thanks
Ioan

Hello Ioan,
this functionality corresponds to currency conversion (and is implemented with a similar concept "conversion type"). Both unit conversions within one dimension (e.g. kg -> g) and e.g. material dependent conversions (e.g. kg -> palettes) are supported.
Currently the conversion can be used within the new transformations and within a planning function. Interactive conversion in query/Bex is not yet supported.
Regards
Tobias Hagen

Function module to release a work permit attached to a service order.

Hi,
We have a requirement of automating the process of work permit release attached to service order.
I am looking for a function module / BAPI for releasing the work permit attached to a service order by passing service order number and permit ID/Name.
If any of you have come accrose such one please share.
Thanks
Achuthanandan

Hello Philip
The following function modules should be useful:
   - CY_PRIMARY_SELECTION            - Function module for selection of orders for the work center
   - CY_SECONDARY_SELECTION          - Check for additional criteria
   - CR_CAPACITY_AVAILABLE_PERIODS   - Reads the available capacity from work center
   - HR_PERSON_READ_TIME_INFO        - Reads the available capacity from person (modification)
   - CY_GET_PART_CAPACITY            - used only for the first period to read backlog
   - CY_LOAD_DISTRIBUTION            - Distribution key
Please observe that these are simple function modules, not BAPIs, That means, they were developed to be used on the SAP internal programs and they are not supported by SAP when used in custom programs.
BR
Caetano

ALE-IDOC Error -Function module not allowed: ZIDOC_INPUT_MATCLASS

Hello all,
I am having a requirement to enhace bd10 to suit for material master.For that i have written a Z-function module to at inbound side.
Function module has coading for extended segments and z processing code is created for the same.
The issue is that i am getting error-Function module not allowed: ZIDOC_INPUT_MATCLASS.Please help to resolve the issue.
Thank you.

I have checked as per your suggestion in detail the error reported as-
Function module not allowed: ZIDOC_INPUT_MATCLASS
Message no. B1252
Diagnosis
The function module ZIDOC_INPUT_MATCLASS and the application object type which were determined are not valid for this IDoc.
Procedure
1. Please check that the process code in the inbound partner profile is correct.
2. If this is the case, you should check the ALE inbound methods ALE inbound methods for the process code and see whether the specified function module and application object type are correct.
3. If this is also the case, then the function module and the application object type are not permitted for the logical message type, message variant, message function and basis type that are contained in the IDoc control record. You should check whether the correct values have been assigned to these fields in the control record. If they do have the correct values, then the assignment to the function module and the application object type needs to be maintained.
I am done with all the procedure.
I am currently using-BUS1001006.I really dont know if this is the one for extended idocs and z function module for material master.Please guide me if this is the issue. And i f so please guide right buziness object.
Thanks.
Edited by: sanjivrd on Sep 22, 2009 1:27 PM

SmartForm Function Module not generated in Production

Hi
I have a smartform in DEV(Box A). It works fine. I trasnsported it to PROD(Box B). It appears as Active state in PROD. But there is no Function module generated for this smartform. As a result my program dumps in PROD.
I am running it on 4.6C Release.
Any suggestions ?
Murali.

Hi again,
1. I dont find any Function Module name under ENVIRONMENT -
> FUNCTION MODULE NAME
Click on
FUNCTION MODULE NAME
and it will give a pop-up window
displaying the FM name.
2. If its not there,
   then u can do 3 things :
a) in prd server, activate the smart form again.
   (this will generate the FM)
b) try to transport a new request,
    for the same smartform.
c) ask basis team to check the LOG
    of this transport request.
(whether any error / warning was there in the
   transport log)
   From this log, if any warning/error is there,
   then we can come to know, that there is some problem.
regards,
amit m.

Function Module not working for old Role

Dears
Function Module not working for old Role
Function Module: /VIRSA/BAPI_AE_USERS_FOR_ROLES
Before EHP4 upgrade this functional module working fine, but after updated users are not visible.
We have chekced if the users are assigned directly users are visible but indirect (Position Based) assignment users are not apprearing.
Pl check the fucntion module with given roles below and identify the root cause,
EP_TRVL_ALL_CAB - Old Role
EP_TRN_TRVL_DRGC_V2 - New Role
Regards
Krishna Mohan CH
9704500717

Krishna,
I do not think this BAPI is meant to be called by anyone but the application using it, and its functionality may therefore change without notice.
What are you trying to achieve? Maybe there's a better way to do that...
Frank.

Error Function module " " not found in Smartforms

Hi all,
Please help me out.
I created the form using the smartforms, check it and activated it. I can see the unique function module is assigned to the form. I wrote the ABAP program and use function module SSF_FUNCTION_MODULE_NAMEand also define data types.
when I called the function module fm_name for passing values and tables from program to smartform. This is working perfectly in development server but in production it giving error like Function module " " not found.
Below I m pasting my code.
*& Report ZCASHJOURNAL                                                *
REPORT zcashjournal                            .
TABLES: bseg.
DATA: FM_NAME TYPE rs38l_fnam.
DATA:BEGIN OF it_bseg OCCURS 0.
        INCLUDE STRUCTURE bseg.
DATA:END OF it_bseg.
DATA:BEGIN OF it_bseg1 OCCURS 0.
        INCLUDE STRUCTURE bseg.
DATA:END OF it_bseg1.
DATA: gv_amt_in_words TYPE spell,
      gv_word TYPE spell-word,
      gv_decword TYPE spell-decword.
DATA:BEGIN OF gt_bkpf OCCURS 0.
        INCLUDE STRUCTURE bkpf.
DATA:END OF gt_bkpf.
DATA:bktxt TYPE bktxt.
DATA:waers TYPE waers.
DATA:belnr TYPE belnr_d.
DATA:werks TYPE bukrs.
DATA:desc TYPE butxt.
DATA:awkey TYPE awkey.
DATA:docno TYPE matnr.
DATA:cajo TYPE awkey.
DATA:desc1 TYPE butxt.
DATA:dmbtr TYPE dmbtr.
SELECTION-SCREEN BEGIN OF BLOCK b2.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (15) FOR FIELD s_belnr.
SELECTION-SCREEN POSITION 28 .
PARAMETERS : s_belnr TYPE bseg-belnr .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (15) FOR FIELD s_werks.
    SELECTION-SCREEN POSITION 28 .
      PARAMETERS: s_werks TYPE werks.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b2.
SELECT * FROM bkpf
           INTO CORRESPONDING FIELDS OF TABLE gt_bkpf
          WHERE belnr LIKE s_belnr
          AND   bukrs LIKE s_werks.
IF NOT gt_bkpf[] IS INITIAL.
SELECT * FROM bseg
      INTO CORRESPONDING FIELDS OF TABLE it_bseg
      FOR ALL ENTRIES IN gt_bkpf
      WHERE bukrs EQ gt_bkpf-bukrs
      AND   belnr EQ gt_bkpf-belnr
      AND   shkzg EQ 'S'.
ENDIF.
LOOP AT gt_bkpf.
bktxt = gt_bkpf-bktxt.
waers = gt_bkpf-waers.
belnr = gt_bkpf-belnr.
werks = gt_bkpf-bukrs.
awkey = gt_bkpf-awkey.
docno = awkey+0(10).
cajo = awkey+10(4).
ENDLOOP.
LOOP AT it_bseg.
dmbtr = it_bseg-dmbtr.
ENDLOOP.
IF s_werks EQ '65'.
desc = 'JCBML - Heavy Equipments'.
ENDIF.
IF cajo EQ '0001'.
desc1 = 'PETTY CASH PLANT II'.
ENDIF.
CALL FUNCTION 'SPELL_AMOUNT'
EXPORTING
    amount    = dmbtr
    currency = waers
    filler    = space
    language = sy-langu
IMPORTING
    in_words = gv_amt_in_words
EXCEPTIONS
    not_found = 1
    too_large = 2
    OTHERS    = 3.
IF sy-subrc EQ 0.
MOVE : gv_amt_in_words-word TO gv_word,
         gv_amt_in_words-decword TO gv_decword.
ENDIF.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    formname                 = 'ZCASHRECPT'
IMPORTING
   FM_NAME                  = FM_NAME
EXCEPTIONS
   NO_FORM                  = 1
   NO_FUNCTION_MODULE       = 2
   OTHERS                   = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
        EXPORTING formname           = 'ZCASHRECPT'
                variant            = ' '
                direct_call        = ' '
        IMPORTING fm_name            = lf_fm_name
        EXCEPTIONS no_form            = 1
                   no_function_module = 2.
*v_vbeln = S_VBELN-low.
CALL FUNCTION FM_NAME
EXPORTING
    bktxt            = bktxt
    waers            = waers
    belnr            = belnr
    werks            = werks
    desc             = desc
    docno            = docno
    cajo             = cajo
    desc1            = desc1
    dmbtr            = dmbtr
    gv_word          = gv_word
TABLES
    T_ZDEB           = it_bseg
EXCEPTIONS
    formatting_error = 1
    internal_error   = 2
    send_error       = 3
    user_canceled    = 4
    OTHERS           = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Hi Rakesh,
Check two things
1. Program tranpsorted to production without any error in request log.
2. Smartform tranpsorted to production without any error in request log and without renaming / misspelling it.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZCASHRECPT'
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Also try to uncomment the Message id part and it will show some meaningful message.
And to check whether actaually fucntion module is generated or not goto smartforms ->Smartform name -> Display -> Environment->Fucntion module name . if this is blank try to retransport smartform.
Hope that helps.
Regards
Kapadia
***Assigning points is the way to say thanks in SDN.***

Idoc error 51 - "Function module not allowed - APPL_IDOC_INPUT1'

Hello everyone,
We are uploading GL balances from legacy to SAP using the LSMW Bapi
object - bus6035
method - post
message type - ACC_DOCUMENT
Basic type - ACC_DOCUMENT03
When we run the lsmw, idoc is created, however with an error 51 saying
"Function module not allowed - APPL_IDOC_INPUT1'
The partner no. is the logical system (the system on which the lsmw is executed)
In the partner profile, we have defined this as LS. In the inbound parameters, we have defined message type = ACC_DOCUMENT, the process code is APL1 and the corresponding function module is - APPL_IDOC_INPUT1
Please let me know if we are missing something or doing anything wrong ?
Since the data in the LSMW will be read frmo a file on the presentation server, do we need to have a port configuration for the same ?
Thanks,
Sushil Joshi`

Hello Sushil
The long text of message B1(252) is quite informative for error analysis:
NA B1252
Short Text
     Function module not allowed: &
Diagnosis
     The function module and the application object type which were
     determined are not valid for this IDoc.
Procedure
     1. Please check that the process code in the inbound partner profile
         is correct.
     2. If this is the case, you should check the ALE inbound methods ALE
         inbound methods for the process code and see whether the specified
         function module and application object type are correct.
     3. If this is also the case, then the function module and the
         application object type are not permitted for the logical message
         type, message variant, message function and basis type that are
         contained in the IDoc control record. You should check whether the
         correct values have been assigned to these fields in the control
         record. If they do have the correct values, then the assignment to
         the function module and the application object type needs to be
         maintained.
On ECC 6.0 this long text contains 3 transactions for analysis:
- WE20
- BD67
- WE57
Regards
Uwe

Function module not allowed: IDOC_INPUT_INVOIC_MRM in 4.6C

Hi All,
I am working on SAP 4.6C, I am trying to post an idoc through WE19 and using message type INVOIC and basic type - INVOIC02. Also, we are using the process code - INVL which using the function IDOC_INPUT_INVOIC_MRM.
While trying to post an MM Invoice after entering all the parameters in WE19, the IDoc in status 51.
Also, the error message states that "Function module not allowed: IDOC_INPUT_INVOIC_MRM". Since it is a standard function module, I donu2019t know how to get to solve the problem.
Thanks in advance.
Regards,
Nagarajan

Hi Nagaraju ,
Make Entries in WE57 . To make entries in this Take help of WE42-Inbound process code INVL .If u did not have the entries then it causes this error .After logging ur entry Check in table EDIFCT.
Hope this helps .
Rgds
Sree . M

IDOC Error - Function module not allowed: IDOC_INPUT_HRMD

Hello Gurus,
I have an issue with the IDOC Transfer. I am using the program RSEINB00 to read the file and convert the data into IDOCs with status 64.
But all my Idocs are getting created with status 51 and the error is getting populated as " Function module not allowed: IDOC_INPUT_HRMD ".
Please do let me know whats needs to be done for this to be rectified.
Thanks,
Naveen.

You are not using the right process code.
In partner profile - in message type
u will see the process code to which a function module is attached,
for ur message type, this is not the right function module.
Regards
Manu

Function module not allowed: AFS_RETAIL_ARTMAS_IDOC_INPUT.

Dear Expert,
   I have a problem when I use ALE. I found error message of inbound in target system have a error status 51. Function module not allowed: AFS_RETAIL_ARTMAS_IDOC_INPUT.
message type is MATMAS. and i want to distribute Material master from 1 system to another system.
Process code: AFSA
This below is my config.
Process code                         AFSA
My process code Identification.
Function module : AFS_RETAIL_ARTMAS_IDOC_INPUT
Maximum number of repeats 0
Object type                         IDOCARTMAS
End event                           MASSINPUTFINISHED
Object type                         IDOCARTMAS
Start event                         INPUTERROROCCURRED
End event                           INPUTFINISHED
How to do this?
thanks,
Sak
Edited by: Pongsak Ruangsongkhram on Dec 24, 2007 8:59 AM

Pls make sure the following config in we42.
Process code                         MATM
Function module                     IDOC_INPUT_MATMAS01 IDOC_INPUT_MA
Maximum number of repeats
Object type                         IDPKMATMAS
End event                           MASSINPUTFINISHED
Object type                         IDOCMATMAS
Start event                         INPUTERROROCCURRED
End event                           INPUTFINISHED
Object type                         BUS1001
Start event
Cheers!

ALE error Function module not allowed: AFS_RETAIL_ARTMAS_IDOC_INPUT.

Hi Gurus,
By ALE config I am trying to send material from one client to another ( MATMAS )
I have created two logical systems and assigned them to corresponding clients.
Created a RFC destination and assigned logical systems.
Created Distribution model in sending client.
Created partner profile in both clients.
Created Material and send to receiving system using BD10 tcode.
I checked Idoc status in Sending system, Idoc status is 03-Data is passed to port OK, status 30-Idoc ready for dispatch and status 01- Idoc generated.
But in receving system (Inbound Idoc)- I got status- 51-Application document not posted and Function module not allowed: AFS_RETAIL_ARTMAS_IDOC_INPUT.
I also checked partner profiles in both systmes- both r same.
IAny help in this regard is appreciated.
Thanks,
Bluesh

On receiver system...
1 - goto WE20
2 - locate the sender logical system (partner)
3 - in Inbound grid select message type MATMAS (double click)
4 - change "Process code" AFSA to MATM (probably AFSA is the actual code)
5 - save and reprocess the IDocs using BD87
Note: Process code AFSA is deafult but the scenarios need a spefic code that is MATM
Best Regards,
Josieudes Claudio
Edited by: Josieudes de Sousa Cláudio on Jul 12, 2011 9:06 PM

Function modules not found....

Hello,
I found the following errors in my SDCCN logs, I have googled and also searched in SAP market place and even in SDN but no help. Also the EWA shows the same in Missing Function Module column.Please help in this regards.
Thanks and Regards,
Yoganand.V
Errors:
1) EWA_MAIN_BUSINESS_HOURS : no matching interface found
    function module not found
    EWA_MAIN_BUSINESS_HOURS : funcname /SDF/MAIN_BUSINESS_HOURS , module 000156
2) READ_RFC_LIST : # of imp params in funcmod < # of imp params in mod 000152
    READ_RFC_LIST : inconsistency in # of imp params found for mod 000152
    READ_RFC_LIST : non-default imp param IF_ANONYMIZE is not passed to mod 000152
    READ_STAMP : no matching interface found
    function module not found
    READ_STAMP : funcname /BDL/READ_STAMP , module 000153

Hi,
EWA_MAIN_BUSINESS_HOURS
READ_RFC_LIST
READ_STAMP
are three new function modules which will be supplied with the next version of ST-PI. The next version of ST-PI is currently scheduled to be released in mid December. For the moment, the only thing to do is to ignore those errors until the next ST-PI becomes available.
best regards,
-David.

Function Module not released yet. Has anybody used them in their programs?

Similar Messages

Maybe you are looking for