Function module required for BOM Changes

Dear SAP Guru
I need the function module which gives me the details of changes done in the BOM.
Scenario: Need to develop the report which gives only the details of BOM changed on the given date. The BOM level might vary.
Regards
Rahul

Dear
I think you should have ECM in place to have tracability for any changes carried out in BOM .
Refer earlier posting : Re: ECM ECR
If the ECM is in place , then you can see what changes has been done in CC02/03 Environmnet - > Reporting -> Bill of Material.
Otherwise please try the following Functinal Module : You can also try CEWB and CS80
1. CSAP_BOM_ITEM_MAINTAIN
2.CS_BOM_EXPL_MAT_V2
3.CHANGEDOCUMENT_READ  and CDHDR
Refer : http://help.sap.com/saphelp_40b/helpdata/en/92/58b521417011d189ec0000e81ddfac/content.htm
Regards
JH

Similar Messages

  • Function Module (BAPI) for Delivery Change

    Dear All,
    We have a Function Module "BAPI_SALESORDER_CHANGE" for changes in sales order, wherein we also can enter Texts in sales order.
    Please tell me similar such function module for Outbound Delivery, wherein I can enter / insert / change the Texts (both Header & Item) in a deivery document.
    Regards,
    Dhananjay

    Thanks
    Where in this Function Module do I find the table / parameter for adding text at item & header level.
    Regards
    Dhananjay

  • Function Module require for Accounting Document

    Hi All,
    Is there any Function Module available for getting Accounting document no which is created after IR.
    Regards,
    Paras

    Hi,
    You can use BAPI_ACC_DOCUMENT_POST.
    Regards,
    Eli

  • Functional Module required for getting list of successful jobs

    Hi All,
    There is one function module BP_JOB_SELECT which gives me name of unsuccessful job. Now I want to find the name of all successful job. Can anyone please tell me the function module name for that?
    Thanks in advance,
    Siddarth.

    You can use the same FM - BP_SELECT_JOB.
    While filling structure JOBSEL_PARAM_IN, you can pass FINISHED = 'X' and
    SCHEDUL = ' '
    READY     = ' '
    RUNNING  = ' '
    ABORTED = ' '
    Regards,
    Mohaiyuddin

  • Process code's function module required for the IDOC Message type PROACT

    Hi,
    I am trying to trigger an IDOC from ME32K transaction which will carry my Contract agreement details to XI. The IDOC I am using for this purpose is PROACT.PROACT01. But I couldn't find the outbound process code / Function module for the process code associated to this IDOC message type.
    Pls help me out....
    Thanks,
    Ram Kalyan

    I checked table EDIFCT for the message type and found this:
    Function module            Function type    Basic type                                      Message Type
    IDOC_INPUT_PROACT          F               PROACT01                                       PROACT
    Oops...I think you are looking for outbound..Ignore

  • Function Module Required for fetching contact details from BUT000

    Hi Everybody.
    I have created a contact using transaction BP.
    these details according to me will get saved in standard table BUT000.
    Now i need standard FM used for fetching all these Contact details.
    Help me i am new to CRM.

    Hi Amit,
    Please check the following:
    Data Retrieval Function Modules:
    Name                                                             Description
    BAPI_BUPA_ADDRESSES_GET              Determine All Addresses
    BAPI_BUPA_ADDRESS_GETDETAIL                Read Address
    BAPI_BUPA_ADDRESS_GET_NUMBERS          Read Address Numbers
    BAPI_BUPA_BANKDETAILS_GET                Determine All Bank Details
    BAPI_BUPA_BANKDETAIL_GETDETAIL            Read Bank Details
    BAPI_BUPA_BANKDETAIL_NUMBERS               Read Bank Details Numbers
    BAPI_BUPA_CENTRAL_GETDETAIL               Read Central Data
    BAPI_BUPA_EXISTENCE_CHECK              Check Existence of Business Partner
    BAPI_BUPA_GET_NUMBERS                               Read Business Partner Numbers
    BAPI_BUPA_RELATIONSHIPS_GET               Determine All BP Relationships
    BAPI_BUPA_ROLES_GET                               Determine All Roles
    BAPI_BUPA_ROLE_EXISTENCE_CHECK          Check Existence of Role
    BAPI_BUPA_SEARCH                              Search Business Partner for Telephone, E-Mail, Address
    BAPI_BUPA_STATUS_GETDETAIL             Business Partner: Read Status
    BAPI_BUPR_ACTIVITYP_EXISTCHECK              Check Existence of Contact Partner Relationship
    BAPI_BUPR_CONTP_ADDRESSES_GET          Read Contact Person Relationship Addresses
    BAPI_BUPR_CONTP_ADDR_GETDETAIL          Read Contact Person Relationship Addresses
    BAPI_BUPR_CONTP_GETDETAIL              Read Contact Person Relationship
    BAPI_BUPR_EMPLO_ADDRESSES_GET        Read Contact Person Relationship Addresses
    BAPI_BUPR_EMPLO_ADDR_GETDETAIL        Read Employee Relationship Address
    BAPI_BUPR_EMPLO_GETDETAIL             Read Employee Relationship
    BAPI_BUPR_RELATIONSHIP_GET              Read General Relationship
    BAPI_BUPR_RELSHIP_CHECKEXIST             Check Existence of General Relationship
    BAPI_BUPR_RELSHIP_GET_DETAIL             Read General Relationship
    BAPI_BUPR_RESP_EMPLO_CHEKEXIST        Read Relationship of Employee Responsible
    BUPA_PARTNER_CONTACT_SEARCH           Searches business partners for telephone, E-Mail, address
    CRM_ORDER_READ                     Get all the Service Contract details.
    Hope this helps!
    Regards,
    Saumya

  • Function Module required for getting Value Range data

    I need a function module where in i can get the data from a value range in a domain.
    Message was edited by:
            Gurpreet Singh

    Hi,
    You can use this code to get the Doman's fixed values.
    DATA:  lt_fixed_values     TYPE ddfixvalues,
      CALL METHOD cl_abap_typedescr=>describe_by_name
        EXPORTING
          p_data      = 'Domain_name' " Pass the domain name here
        RECEIVING
          p_descr_ref = lcl_abap_typedescr.
      TRY.
          lcl_abap_elemdescr ?= lcl_abap_typedescr.
        CATCH cx_sy_move_cast_error.
      ENDTRY.
      IF lcl_abap_elemdescr IS BOUND.
        CALL METHOD lcl_abap_elemdescr->get_ddic_fixed_values
          EXPORTING
            p_langu        = sy-langu " Give the language
          RECEIVING
            p_fixed_values = lt_fixed_values " This table will have the fixed values
          EXCEPTIONS
            not_found      = 1
            no_ddic_type   = 2
            OTHERS         = 3.
      ENDIF.
    Regards,
    Sesh

  • Function module required for time stamp conversion into MST

    Hello,
    Please let me know if there is a SAP function module that can convert timestamp from GMT or provided timestamp into MST. I will need to use this function in BW transformation.
    Thanks.

    Try this one: TZ_GLOBAL_TO_LOCAL.
    Haven't used it myself yet, but it looks good.
    Good luck!
    Best regards,
    Zhou

  • Function Module required for IBASE component

    Hi Experts,
    Is there any FM which can get the warranty start date with IBASE component??
    Warranty is assigned to IBASE component under relationship tab.
    Points shall be rewarded for sure
    Regards,
    Madhu

    Hi Madhu,
    This the Table that is used to retrieve the Warranty Profile for the Installed Base. CDBD_IL_IBCWTY - Installed Base Components - Warranty Relationship. If you know the IBASE no and the corresponding COMP number then you can get the Warranty related details. Till now I was unable to find any FM that would do the same.
    For the IBASE related details, you can have a look at the following Function Group. IB_CRM_API - IB: CRM APIs for IBase.
    Thanks,
    Samantak.
    Rewards points for useful answers.

  • Update Function Module Required for Deletion/Truncation of Open Hub Table

    Hi All,
    I need to delete/Truncate DB tables i.e. Ztables using Update FM
    can anyone help me with few Update FM.
    Regards,
    NS.

    If you want to Delete Custom DB table then you can use FM RS_DD_DELETE.
    You can delete, if the table is not used anywhere in SAP.
    Close thread if you got a answer
    Kanagaraja L
    Edited by: Kanagaraja  Lokanathan on Mar 16, 2010 9:54 AM

  • Function module name for routing fom production orders

    Function module name for routing fom production orders

    Hi
    There are lot of fun modules related to routing
    like
    BAPI_ROUTING_CREATE
    BAPI_ROUTING_EXISTENCE_CHECK
    goto SE37 Tcode
    enter routing press F4
    you will get a lot out of that use the required one
    Reward points for useful Answers
    Regards
    Anji

  • Function module/BAPI for executing VD51/VD52 transactions

    Hi
    Warm greetings to all,
    I require a function module/BAPI for executing VD51/VD52 transactions. Can anyone help on this
    Sreekanth

    Hi Sreekanth,
    Use this.
    There is an FM which is used by standard transaction
    'RV_CUSTOMER_MATERIAL_UPDATE' .
    Ex Code -
    CALL FUNCTION 'RV_CUSTOMER_MATERIAL_UPDATE'
    IN UPDATE TASK
    TABLES
    XKNMT_TAB = XKNMT
    YKNMT_TAB = YKNMT
    TCATALOG_TAB = LT_CATALOG.
    commit work.
    Regards,
    Vijay

  • Function Module / BAPI for Creating Material freight Group

    Hi All,
    Can anyone tell me the Function Module / Bapi for creating material freight group.
    Regards,
    Raj.

    Bapi for creating material freight group. :: You actually use mm01 or mm02 to change data for material flight.
    So you can use BAPI for mm02 and mm01
    For Ex:
    BAPI_MATERIAL_SAVEDATA
    Hope this helps

  • BAPI(Function Module Required)

    Hi Gurus ,
    Please provide me the function module (BAPI) for the following.
    1. Create Purchase Requisition
    2. Update/Change Equipment master(Iq02)
    Thanks
    Tausif

    Purchase Requisition:
    BAPI_REQUISITION_CHANGE Change Purchase Requisition
    BAPI_REQUISITION_CREATE Create Purchase Requisition
    BAPI_REQUISITION_DELETE Delete/Close Purchase Requisition
    BAPI_REQUISITION_GETDETAIL Display Purchase Requisition Details
    BAPI_REQUISITION_GETITEMS Read Purchase Requisition Item
    BAPI_REQUISITION_GETITEMSREL List Purchase Requisitions Awaiting Release
    Equipment:
    BAPI_EQMT_CREATE Create equipment
    BAPI_EQMT_DETAIL Read details for equipment
    BAPI_EQMT_DISMANTLEFL Dismantle equipment at functional location
    BAPI_EQMT_DISMANTLEHR Dismantle equipment from equipment hierarchy
    BAPI_EQMT_GETCATALOGPROFIL Determine catalog profile for equipment
    BAPI_EQMT_GETLISTFORCUSTOMER Select customer equipment
    BAPI_EQMT_INSTALLFL Install equipment at functional location
    BAPI_EQMT_INSTALLHR Install equipment in equipment hierarchy
    BAPI_EQMT_MODIFY Change equipment
    thanks
    sitaram

  • Function module is used to change the bp role

    WHICH function module is used to change the bp role????

    I have another doubt also,when i add a role (example prospect) for a bp using the function module it works fine.but if i see the classification tab in bp transaction for that particular partner,the prospect check box is not checked.
    how to check that checkbox in classification tab automatically while we create a role????

Maybe you are looking for