Function Module required for IBASE component
Hi Experts,
Is there any FM which can get the warranty start date with IBASE component??
Warranty is assigned to IBASE component under relationship tab.
Points shall be rewarded for sure
Regards,
Madhu
Hi Madhu,
This the Table that is used to retrieve the Warranty Profile for the Installed Base. CDBD_IL_IBCWTY - Installed Base Components - Warranty Relationship. If you know the IBASE no and the corresponding COMP number then you can get the Warranty related details. Till now I was unable to find any FM that would do the same.
For the IBASE related details, you can have a look at the following Function Group. IB_CRM_API - IB: CRM APIs for IBase.
Thanks,
Samantak.
Rewards points for useful answers.
Similar Messages
-
Function Module require for Accounting Document
Hi All,
Is there any Function Module available for getting Accounting document no which is created after IR.
Regards,
ParasHi,
You can use BAPI_ACC_DOCUMENT_POST.
Regards,
Eli -
Functional Module required for getting list of successful jobs
Hi All,
There is one function module BP_JOB_SELECT which gives me name of unsuccessful job. Now I want to find the name of all successful job. Can anyone please tell me the function module name for that?
Thanks in advance,
Siddarth.You can use the same FM - BP_SELECT_JOB.
While filling structure JOBSEL_PARAM_IN, you can pass FINISHED = 'X' and
SCHEDUL = ' '
READY = ' '
RUNNING = ' '
ABORTED = ' '
Regards,
Mohaiyuddin -
Process code's function module required for the IDOC Message type PROACT
Hi,
I am trying to trigger an IDOC from ME32K transaction which will carry my Contract agreement details to XI. The IDOC I am using for this purpose is PROACT.PROACT01. But I couldn't find the outbound process code / Function module for the process code associated to this IDOC message type.
Pls help me out....
Thanks,
Ram KalyanI checked table EDIFCT for the message type and found this:
Function module Function type Basic type Message Type
IDOC_INPUT_PROACT F PROACT01 PROACT
Oops...I think you are looking for outbound..Ignore -
Function Module Required for fetching contact details from BUT000
Hi Everybody.
I have created a contact using transaction BP.
these details according to me will get saved in standard table BUT000.
Now i need standard FM used for fetching all these Contact details.
Help me i am new to CRM.Hi Amit,
Please check the following:
Data Retrieval Function Modules:
Name Description
BAPI_BUPA_ADDRESSES_GET Determine All Addresses
BAPI_BUPA_ADDRESS_GETDETAIL Read Address
BAPI_BUPA_ADDRESS_GET_NUMBERS Read Address Numbers
BAPI_BUPA_BANKDETAILS_GET Determine All Bank Details
BAPI_BUPA_BANKDETAIL_GETDETAIL Read Bank Details
BAPI_BUPA_BANKDETAIL_NUMBERS Read Bank Details Numbers
BAPI_BUPA_CENTRAL_GETDETAIL Read Central Data
BAPI_BUPA_EXISTENCE_CHECK Check Existence of Business Partner
BAPI_BUPA_GET_NUMBERS Read Business Partner Numbers
BAPI_BUPA_RELATIONSHIPS_GET Determine All BP Relationships
BAPI_BUPA_ROLES_GET Determine All Roles
BAPI_BUPA_ROLE_EXISTENCE_CHECK Check Existence of Role
BAPI_BUPA_SEARCH Search Business Partner for Telephone, E-Mail, Address
BAPI_BUPA_STATUS_GETDETAIL Business Partner: Read Status
BAPI_BUPR_ACTIVITYP_EXISTCHECK Check Existence of Contact Partner Relationship
BAPI_BUPR_CONTP_ADDRESSES_GET Read Contact Person Relationship Addresses
BAPI_BUPR_CONTP_ADDR_GETDETAIL Read Contact Person Relationship Addresses
BAPI_BUPR_CONTP_GETDETAIL Read Contact Person Relationship
BAPI_BUPR_EMPLO_ADDRESSES_GET Read Contact Person Relationship Addresses
BAPI_BUPR_EMPLO_ADDR_GETDETAIL Read Employee Relationship Address
BAPI_BUPR_EMPLO_GETDETAIL Read Employee Relationship
BAPI_BUPR_RELATIONSHIP_GET Read General Relationship
BAPI_BUPR_RELSHIP_CHECKEXIST Check Existence of General Relationship
BAPI_BUPR_RELSHIP_GET_DETAIL Read General Relationship
BAPI_BUPR_RESP_EMPLO_CHEKEXIST Read Relationship of Employee Responsible
BUPA_PARTNER_CONTACT_SEARCH Searches business partners for telephone, E-Mail, address
CRM_ORDER_READ Get all the Service Contract details.
Hope this helps!
Regards,
Saumya -
Function module required for BOM Changes
Dear SAP Guru
I need the function module which gives me the details of changes done in the BOM.
Scenario: Need to develop the report which gives only the details of BOM changed on the given date. The BOM level might vary.
Regards
RahulDear
I think you should have ECM in place to have tracability for any changes carried out in BOM .
Refer earlier posting : Re: ECM ECR
If the ECM is in place , then you can see what changes has been done in CC02/03 Environmnet - > Reporting -> Bill of Material.
Otherwise please try the following Functinal Module : You can also try CEWB and CS80
1. CSAP_BOM_ITEM_MAINTAIN
2.CS_BOM_EXPL_MAT_V2
3.CHANGEDOCUMENT_READ and CDHDR
Refer : http://help.sap.com/saphelp_40b/helpdata/en/92/58b521417011d189ec0000e81ddfac/content.htm
Regards
JH -
Function Module required for getting Value Range data
I need a function module where in i can get the data from a value range in a domain.
Message was edited by:
Gurpreet SinghHi,
You can use this code to get the Doman's fixed values.
DATA: lt_fixed_values TYPE ddfixvalues,
CALL METHOD cl_abap_typedescr=>describe_by_name
EXPORTING
p_data = 'Domain_name' " Pass the domain name here
RECEIVING
p_descr_ref = lcl_abap_typedescr.
TRY.
lcl_abap_elemdescr ?= lcl_abap_typedescr.
CATCH cx_sy_move_cast_error.
ENDTRY.
IF lcl_abap_elemdescr IS BOUND.
CALL METHOD lcl_abap_elemdescr->get_ddic_fixed_values
EXPORTING
p_langu = sy-langu " Give the language
RECEIVING
p_fixed_values = lt_fixed_values " This table will have the fixed values
EXCEPTIONS
not_found = 1
no_ddic_type = 2
OTHERS = 3.
ENDIF.
Regards,
Sesh -
Function module required for time stamp conversion into MST
Hello,
Please let me know if there is a SAP function module that can convert timestamp from GMT or provided timestamp into MST. I will need to use this function in BW transformation.
Thanks.Try this one: TZ_GLOBAL_TO_LOCAL.
Haven't used it myself yet, but it looks good.
Good luck!
Best regards,
Zhou -
Update Function Module Required for Deletion/Truncation of Open Hub Table
Hi All,
I need to delete/Truncate DB tables i.e. Ztables using Update FM
can anyone help me with few Update FM.
Regards,
NS.If you want to Delete Custom DB table then you can use FM RS_DD_DELETE.
You can delete, if the table is not used anywhere in SAP.
Close thread if you got a answer
Kanagaraja L
Edited by: Kanagaraja Lokanathan on Mar 16, 2010 9:54 AM -
Function module name for routing fom production orders
Function module name for routing fom production orders
Hi
There are lot of fun modules related to routing
like
BAPI_ROUTING_CREATE
BAPI_ROUTING_EXISTENCE_CHECK
goto SE37 Tcode
enter routing press F4
you will get a lot out of that use the required one
Reward points for useful Answers
Regards
Anji -
Function module/BAPI for executing VD51/VD52 transactions
Hi
Warm greetings to all,
I require a function module/BAPI for executing VD51/VD52 transactions. Can anyone help on this
SreekanthHi Sreekanth,
Use this.
There is an FM which is used by standard transaction
'RV_CUSTOMER_MATERIAL_UPDATE' .
Ex Code -
CALL FUNCTION 'RV_CUSTOMER_MATERIAL_UPDATE'
IN UPDATE TASK
TABLES
XKNMT_TAB = XKNMT
YKNMT_TAB = YKNMT
TCATALOG_TAB = LT_CATALOG.
commit work.
Regards,
Vijay -
Is there any delivered BAPI or Functional modules available for MCHB table
Hi Experts,
I have a requirement where I have to pull inventory data from MCHB table without custom code. Is there any delivered BAPI or Functional modules available for MCHB table?
Kindly help!
Thanks
GopalHi,
Can you check using the Fun Modules
MG_BATCH_CHECK_STOCK
VB_READ_BATCH_WITHOUT_STOCK
VB_BATCH_GET_ALL_STOCKS
Regards,
Anji -
OW function modules to read ibase
Hi consultants,
Is there any "OW" function modules to read ibase , if yes please let me know the function modules .
Regards,
Naveen Kumar M Shi
check this out
CRM_IBASE_COMP_CHANGE
it is used for treading and saving the changes in ibase
also try this
BAPI_ECRMISUTO_INIT
best regards
ashish -
Function modules to read ibase at runtime
Hi guru's,
Is there any function modules to read ibase at run time if yes please send those function modules its urgent please please.
regards
naveen kumaranswered
-
Function module exits for Tcode MD11.
Please tell me, Function module exits for Tcode MD11.
Reg .
PrajuHi
LMDR2001
LMDZU001
Try out these exits.
Check the folloing BADI's
MD_PLDORD_SCHEDULING
MD_PIR_FLEX_CONS
MD_PLDORD_SCHEDULING
Regards
Divya
Maybe you are looking for
-
I just got an iphone 6. Not all of my music was on itunes, so I logged in and instead of clicking set up as new iphone I hit restore from backup, thinking it only pertained to the music in itunes. Now my new iphone looks just like my old iphone and h
-
I have this query, however... I need the 'category' variable to be 'LIKE' but the way I have it set up it doent work. Anyone have an idea of how I might fix this. <CFQUERY name="getworkshops" datasource="source"> SELECT m.category, m.proj_key, m.proj
-
Hi, I am using 11i application on 9i database. I tried to run autoconfig on the apps tier. I navigate to COMMON_TOP/admin/scripts/bdev_oraapps and ran auto config [applpdev@ebs pdev_oraapps]$ ./adautocfg.sh after entering the password it show'
-
Hi, How can i install the ITS in the NW04s ? Which CD do i need ? Thank's
-
Adobe flash player downloads but does not work
Hi, When I download the flash player is says to click on active x and I do and allow and then it downloads and says complete but does not work when I try to watch you tube videos. It says download flash player which I have already done. Please help