Function module RSD_ZBCSASSET_TXT_GET does not exist
Hi,
We are working with SEM-BCS 6.0 (SAP BI 7.0), and I want to trasfer master data of a infoobject from BI to SEM BCS through load from data stream task.
When I going to execute the task the system display the next message Function module RSD_ZBCSASSET_TXT_GET does not exist. Message no. EU802.
Thanks in advanced
Carlos
Same error occured in a planning sequence of mine. The related characteristic did not have texts.
The error occured after the addition of a navigational attribute to the MultiProvider.
Solution: re-activate the aggregation level.
Late, but hope that helps...
Similar Messages
-
Function module RSD_ZIO_ALM02_TXT_GET does not exist
Hi
I am trying to copy the data from one info cube to another info cube with the read master data in transformation rule for some of the info object. This exercise I have done many times successfully for the same structure but suddenly I am getting this error without doing any changes
'Function module RSD_ZIO_ALM02_TXT_GET does not exist'
After getting this error I have delete the transfer rule for above object than the some error are coming for the another info object which also used for read master data.
Kindly help me .(we are working on ECC 6)
Thanks and Regards
VinayHi Vis
I tried this one also but its not working. All the info objects are active and I tried after reactivating also but still error exits.
Thanks and regards
Vinay -
Calling a remote enabled function module which does not exist in caller sys
Hi,
I have a a system ABC from which I am trying call a rfc enabled fm(Test) present in system XYZ.
The fm(Test) does not exist in the system ABC so I am getting generation errors and dumps.
Is there a way for me to call these remote enabled function modules which does not exist in the caller system without the obvious errors etc.
Is there any special way.
ThanksHi,
please check this sample:
REPORT zcallfm .
DATA: xv_return TYPE sysubrc.
CALL FUNCTION 'DOESNOTEXIST'
DESTINATION 'NOWHERE'
EXPORTING caller = sy-sysid
IMPORTING return = xv_return
EXCEPTIONS system_failure = 1
communication_failure = 2
OTHERS = 4.
It shouldn't throw any generation errors in your system!
Regards,
Klaus -
Function Module SWK_LOCAL_INBOX_GET does not exists
Hi,
I configured UWL in the Portal.
When i am trying to acess UWL, throwing an exception.
it says "Exception type:com.sap.netweaver.bc.uwl.connect.ConnectorException Message:Thu Apr 12 15:58:26 GMT+05:30 2007 :Function Module SWK_LOCAL_INBOX_GET not found"
Can anyone help me what could be the problem.
Rgds,
Kiran JoshuaHello Kiran,
at least the user needs to have the Role SAP_BC_SRV_GBT_USER in backend.
My only other idea is to check the existance of the plugin (WP-PI) in R/3.
But, in a similar situation (missing plugin in R/3) i got the ConnectorException "Failed getting the following function metadata from repository: URL_SERVER_TYPE_DATA_GET".
Perhaps a trace in R/3 could assist you?
Sorry, no more ideas, regards -
Function group BUS1001 does not exist
Hi Guys,
I have SAP QIM system which is built on NetWeaver Stack. It pulls all the data from another ECC system.
I am facing an issue while doing F4 on the field of Material. Ideally it should pull all the values there in E60 System but it is giving me an error
"Function group BUS1001 does not exist".
Can someone help me with this?Hi,
Sometimes the navigation Index for FM/program needs updating. Try this, open the FM and in the menu go to Utilities then 'update Navigation Index'.
Best of luck,
David -
Apex 4 error ORA-04042 procedure, function, package body does not exist
Hi all,
I was instaling Oracle Application Expres 10g on Linux ubuntu and I was download and unzip apex 4
on /usr/lib/oracle/xe/
then connect as SYS as sysdba with pass and
start
@/usr/lib/oracle/xe/apex/apexins SYSAUX SYSAUX TEMP /i/
installation starting
... after 5 minutes theres end of log file>
I. O R A C L E S Y S I N S T A L L P R O C E S S
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/dev_grants.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/core_grants.sql"
...CONNECT as the Oracle user who will own the APEX engine
Session altered.
III. I N S T A L L A P E X P A C K A G E S P E C S
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_plsql_editor.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_model_api.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_f4000_util.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_plugin_f4000.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_image_generator.sql"
Installing Team Development objects
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/team_tab.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_team.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_team_api.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_team_gen_api.sql"
Installing Application Migration Workshop objects
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_mig_create_ddl.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_mig_frm_create_ddl.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_mig_exporter_ins.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/mig_views.sql"
...installing Application Migration Workshop package spec
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_mig_acc_load.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_mig_frm_load_xml.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_mig_frm_olb_load_xml.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_mig_frm_update_apx_app.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_mig_frm_utilities.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_mig_frmmenu_load_xml.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_mig_rpt_load_xml.sql"
...install Application Migration Workshop package body
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_mig_acc_load.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_mig_frm_load_xml.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_mig_frm_olb_load_xml.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_mig_frm_update_apx_app.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_mig_frm_utilities.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_mig_frmmenu_load_xml.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_mig_rpt_load_xml.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_item_comps.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_translation_utilities.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/copy.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/copy_lov.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/copy_item.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/copy_button.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_translation_utilities.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/seed.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/sync.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/layout.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_lov_used_on_pages.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_query_builder.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_sw_object_feed.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_load_data.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_load_excel_data.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/copy_metadata.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/copyu.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_tab_mgr.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/generate_ddl.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/table_drill.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_download.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_copy_page.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/generate_table_api.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_gen_hint.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_xliff.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_create_model_app.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/apex_admin.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_help.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_data_quick_flow.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_theme_files.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_session_mon.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_sw_page_calls.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_wiz_confirm.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_page_map.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_drag_layout.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_dataload_xml.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/apex_ui_default_update.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/apex_mig_projects_update.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_install_wizard.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_dictionary.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_advisor.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_search.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_f4000_plugins.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_4000_ui.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_4050_ui.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_workspace_reports.sql"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_f4000_p4150.sql"
timing for: Development Package Specs
Elapsed: 00:00:00.02
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_plsql_editor.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_model_api.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_f4000_util.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_plugin_f4000.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_image_generator.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/layout.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_query_builder.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_sw_object_feed.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_load_data.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_load_excel_data.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/copy_metadata.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/copyu.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_tab_mgr.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/generate_ddl.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/table_drill.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_download.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_copy_page.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/generate_table_api.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_gen_hint.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_translation_utilities.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_xliff.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_create_model_app.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_help.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_data_quick_flow.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_theme_files.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_session_mon.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_sw_page_calls.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_wiz_confirm.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_page_map.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_drag_layout.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_dataload_xml.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/apex_ui_default_update.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/apex_mig_projects_update.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_install_wizard.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_dictionary.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_advisor.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_search.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_f4000_plugins.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_4000_ui.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_4050_ui.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_translation_utilities.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_team.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_team_api.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_team_gen_api.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_workspace_reports.plb"
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_flow_f4000_p4150.plb"
...install demonstration Oracle APEX application package specs
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/collections_showcase.sql"
...install demonstration Oracle APEX application package bodies
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/collections_showcase.plb"
...install demonstration tables
SP2-0310: unable to open file "/usr/lib/oracle/xe/apex/coreinscore/wwv_demo_tab.sql"
timing for: Development Package Bodies
Elapsed: 00:00:00.03
grant execute on wwv_mig_acc_load to public
ERROR at line 1:
ORA-04042: procedure, function, package, or package body does not exist
is there any solution?
regards
GordanInstall 4.0 pass ok!
1. I was changing apexins.sql
as PREFIX='@/usr/lib/oracle/xe/apex/'
and add path to coreins.sql as @/usr/lib/oracle/xe/apex/coreins.sql
2. create two folders coreinscore and coreinsbuild and copy all files from folder core and folder build
3. copy and rename endins.sql as coreinsendins.sql
after 10 min instalation pass ok!
Gordan
Edited by: useruseruser on Jun 29, 2010 2:12 PM -
Function Module - E_T_DATA does not return data
Hi
I am trying to create a fuction module Generic extraction, the code belwo dosen't return any data.
when i debug YBW_MAT_STAT does have but after E_T_DATA = YBW_MAT_STAT it dose not return any data
can you help?
Ramesh
FUNCTION YBW_FM_ACTIVE_MATERIAL.
""Local Interface:
*" IMPORTING
*" VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*" VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*" VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*" VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*" VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*" VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*" I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*" I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*" E_T_DATA STRUCTURE YBW_MAT_STAT OPTIONAL
*" EXCEPTIONS
*" NO_MORE_DATA
*" ERROR_PASSED_TO_MESS_HANDLER
Example: DataSource for table SFLIGHT
TABLES: YBW_MAT_STAT.
Auxiliary Selection criteria structure
DATA: L_S_SELECT TYPE SRSC_S_SELECT.
DATA : YBW_MAT_STAT type YBW_MAT_STAT occurs 0 with header line.
Maximum number of lines for DB table
STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
counter
S_COUNTER_DATAPAKID LIKE SY-TABIX,
cursor
S_CURSOR TYPE CURSOR.
Select ranges
Comment copy code
RANGES: L_R_CARRID FOR SFLIGHT-CARRID,
L_R_CONNID FOR SFLIGHT-CONNID.
DATA: begin of t_marc occurs 0,
ZMATNR type MATNR,
ZWERKS type WERKS,
end of t_marc.
DATA: begin of t_ytmd_mat_ref occurs 0,
ZMATNR type MATNR,
ZYNA_MATNR_ST type YNA_MATNR_ST,
ZYEAME_MATNR_ST type YEAME_MATNR_ST,
ZYFIN_MATNR_ST type YFIN_MATNR_ST,
end of t_ytmd_mat_ref.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF I_INITFLAG = SBIWA_C_FLAG_ON.
Initialization: check input parameters
buffer input parameters
prepare data selection
Check DataSource validity
CASE I_DSOURCE.
WHEN 'ZAINV_MAT_STATUS'.
WHEN OTHERS.
IF 1 = 2. MESSAGE E009(R3). ENDIF.
this is a typical log call. Please write every error message like this
LOG_WRITE 'E' "message type
'R3' "message class
'009' "message number
I_DSOURCE "message variable 1
' '. "message variable 2
RAISE ERROR_PASSED_TO_MESS_HANDLER.
ENDCASE.
APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
Fill parameter buffer for data extraction calls
S_S_IF-REQUNR = I_REQUNR.
S_S_IF-DSOURCE = I_DSOURCE.
S_S_IF-MAXSIZE = I_MAXSIZE.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
ELSE. "Initialization mode or data extraction ?
Data transfer: First Call OPEN CURSOR + FETCH
Following Calls FETCH only
First data package -> OPEN CURSOR
IF S_COUNTER_DATAPAKID = 0.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
SELECT MATNR WERKS FROM MARC into table t_marc where MATNR BETWEEN '4233940M1' and '4233950M1'.
loop at t_marc.
SELECT MATNR YNA_MATNR_ST YEAME_MATNR_ST FROM YTMD_MAT_REF into table t_ytmd_mat_ref where MATNR = t_marc-zmatnr.
loop at t_ytmd_mat_ref.
if t_marc-zwerks = 'GB71' AND t_ytmd_mat_ref-ZYEAME_MATNR_ST = 'A'.
read table t_ytmd_mat_ref with key zmatnr = t_marc-zmatnr.
YBW_MAT_STAT-matnr = t_marc-zmatnr.
YBW_MAT_STAT-plant = t_marc-zwerks.
append YBW_MAT_STAT.
clear YBW_MAT_STAT.
endif.
endloop.
endloop.
ENDIF. "First data package ?
clear E_T_DATA.
refresh E_T_DATA.
E_T_DATA = YBW_MAT_STAT.
S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF. "Initialization mode or data extraction ?
ENDFUNCTION.Hi
I have a question,
With the above code i have all my records (450000+) in a single data package.
how do i break this in multiple data packages
regards
Ramesh -
Error EU 802: Function Module does not exist
Hello everyone!
While running a DTP, I'm getting the following error:
EU 802: Function Module RSD_YPERSON_TXT_GET does not exist
Anyone has any idea what this is about?
Thanks in advance for your responses!
Best Regards,
Luís.Hi,
I have resolved this issue. Turns out that I was mapping a source field INPER (In-Period) directly to 0CALMONTH. The problem is that this source field can have more than 12 periods per year.
The error message was totally misleading... there's SAP for you
Points assigned for the effort.
Best regards,
Luís. -
Upgrade Issue: CHECK_IBAN_ACTIVE does not exist in ECC6.0
Hi,
We are upgrading ECC system from 4.6C to 6.0. I am getting a short dump in a program as function module CHECK_IBAN_ACTIVE does not exist in ECC6.0. I checked SAP note and found one (SAP Note 392091). But this cannot be implemented as it is valid till 4.6C. Could not find any alternative SAP note too.
Any of you know alternative SAP note for the same in ECC6? Quick help appreciated.
Reward points assured if the answer helps.
Regards,
Sanju.Hey i have the same issue with this FM
Did u find any solution to this..?
plz help me ... urgent..!! -
Nvidia module does not exist in /proc/modules
Hi!
I compiled kernel with grsecurity from AUR. everything goes fine, and my system boot with a new kernel.
Only thing i have a problem with, is nvidia module.
I'm tried to makepkg nvidia with ABS way, but i get errors:
ERROR: Module nvidia does not exist in /proc/modules
In order to use the new nvidia module, exit Xserver and unload it manualy.
I"m trying to do:
modprobe nvidia
but i get:
FATAL: Error inserting nvidia (/lib/modules/2.6.32-grsec-ARCH/kernel/drivers/video/nvidia.ko): Cannot allocate memory
When i write :find /lib/modules -name nvidia.ko
I get: lib/modules/2.6.32-grsec-ARCH/kernel/drivers/video/nvidia.ko
When i write: uname -r
I get: 2.6.32-grsec-ARCH
Any help please..you have to reboot after installing nvidia because the > 2.6.34 kernel has nouveau and is using the card.
-
Request having function group released but function module attribute shows not released
Hi experts,
I am a beginner.
There is a transport request in which my function group and other objects were present . This transport request and its task were released . But if i check the attributes section of the function module that is present in that function group , it shows not released .
Is there some problem ? did the function module not get released with its group? It wasn't showing anywhere in the request even though i had added it during creation.
Here is the image :
Thanks,
UnnatiHi,
Those two meanings of 'released' are unrelated. Don't worry about it.
Also, a function module sometimes does not explicitly appear in a transport request, if the function group is already in there.
cheers
Paul -
Function Module Does not exist
Hello Experts,
I am trying to run the initialization for the Billing conditions 2lis_13_vdkon datasource.
Job is getting cancelled and the following error messages are coming when i check the job log in source system
Job started
Step 001 started (program SBIE0001, variant &0000000006238, user ID BASIS
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = 2LIS_13_VDKON
RLOGSYS = BWDCLNT900
REQUNR = REQU_DHKONXGA1B82HZ49O94KQ03C4
UPDMODE = C
LANGUAGES = *
* Current Values for Selected Profile Parameters *
* abap/heap_area_nondia......... 2000683008
* abap/heap_area_total.......... 2000683008
* abap/heaplimit................ 40894464
* zcsa/installed_languages...... ED
* zcsa/system_language.......... E
* ztta/max_memreq_MB............ 2047
* ztta/roll_area................ 3000320
* ztta/roll_extension........... 2000683008
Function module /BI0/QI2LIS_13_VDKON does not exist
You can only use LIKE and TYPE to specify types in RFC
Internal session terminated with a runtime error (see ST22)
Job cancelled
even when i check in ST22
Category
ABAP Programming Error
Runtime Errors
IMPORT_ALIGNMENT_MISMATCH
Except.
CX_SY_IMPORT_MISMATCH_ERROR
ABAP Program
SAPLMCEX
Application Component LO-LIS
Date and Time
06.05.2014 12:30:28
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
not caught in
procedure "MCEX_BW_LO_API" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When importing object "MC13VD0KON_TAB", the structure did not match the
structure of the target object. The error occurred in component
no. 21.
This may be due to one of the following reasons:
- the structure is actually different (the next field has, for
example, a different data type) or
- the same sequence of components were exported and imported,
but the fields were from other include units.
How to correct the error
There is a probably a new version of the program active that does
not match the dataset. The data may not have been converted.
It is also possible that the field type of the imported field
has been changed in the Data Dictionary.
Try to eliminate the error by regenerating the program "SAPLMCEX". To
do this, proceed as follows:
Call Transaction SE38 in the R/3 System, enter the program
name "SAPLMCEX" and then choose "Generate".
If the error occurred in your own ABAP program or in an SAP
program you modified, try to remove the error.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"IMPORT_ALIGNMENT_MISMATCH" "CX_SY_IMPORT_MISMATCH_ERROR"
"SAPLMCEX" or "LMCEXU06"
"MCEX_BW_LO_API"
If you cannot solve the problem yourself and want to send an error
please help me in this regards
Quick response will be appreciated.
Thanks in advanceHi Ram,
no upgrades recently
they have taken backup from production server.
now i am facing this prob in development server.
when i am trying to check in RSA3 it is throwing same short dump
as u said i did all the re activations still i am facing the same issue.
please give me some other sol...
thanks,
srikanth Putta' -
Function module does not exist in ECC 6.0
Hi All,
These two below function module does not exist in ECC 6.0 but exist in 4.6.Could you please let me know replacement of these two's.
FI_DOCUMENT_ARCH_READ_SINGLE
CHECK_IBAN_ACTIVE
Thanks
MohitHi,
Thanks for your reply.Could you please give me example that how to use it.
Thanks
Mohit -
Error in ERM: Function module does not exist
Hi all,
Lately, we are experiencing a frequent error in ERM (5.3 SP 15.0) that we had not had before. We are unsure what caused the error. The message displayed to the user is "Unhandled error". The log error message is "Message Code is 651 Messsage Details Function module does not exist Message Type is E" (see full logs below).
The error occurs for example, when users are trying to generate derived roles after saving the org values for the derived role during the methodology process, or when administrators are trying to update the impacted derived roles after for org value mappings.
Has anyone experienced this or someting similar before? Any ideas what could be the reason here?
Thanks!
Patrick
Edited by: Patrick Weyers on Sep 15, 2011 9:36 AMLog extract:
2011-09-15 09:05:15,103 [SAPEngine_Application_Thread[impl:3]_18] ERROR Message Code is 651 Messsage Details Function module does not exist Message Type is E
java.lang.Throwable: Message Code is 651 Messsage Details Function module does not exist Message Type is E
at com.virsa.re.service.sap.dao.ManageAuthDataDAO.getAuthorizationData(ManageAuthDataDAO.java:1064)
at com.virsa.re.bo.impl.AuthorizationDataBO.getNewTransactionObjects(AuthorizationDataBO.java:821)
at com.virsa.re.role.actions.AuthAuthorizationDataAction.addObjsForNewTxns(AuthAuthorizationDataAction.java:3527)
at com.virsa.re.role.actions.AuthAuthorizationDataAction.reloadTransactions(AuthAuthorizationDataAction.java:4128)
at com.virsa.re.role.actions.AuthAuthorizationDataAction.execute(AuthAuthorizationDataAction.java:157)
at com.virsa.framework.NavigationEngine.execute(NavigationEngine.java:273)
at com.virsa.framework.servlet.VFrameworkServlet.service(VFrameworkServlet.java:230)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
at com.virsa.framework.servlet.VFrameworkServlet.service(VFrameworkServlet.java:286)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
at com.virsa.comp.history.filter.HistoryFilter.doFilter(HistoryFilter.java:43)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:384)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:219)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
2011-09-15 09:05:15,105 [SAPEngine_Application_Thread[impl:3]_18] ERROR com.virsa.re.role.actions.AuthAuthorizationDataAction
java.lang.Throwable: java.lang.NullPointerException
at com.virsa.re.service.sap.dao.ManageAuthDataDAO.getAuthorizationData(ManageAuthDataDAO.java:1084)
at com.virsa.re.bo.impl.AuthorizationDataBO.getNewTransactionObjects(AuthorizationDataBO.java:821)
at com.virsa.re.role.actions.AuthAuthorizationDataAction.addObjsForNewTxns(AuthAuthorizationDataAction.java:3527)
at com.virsa.re.role.actions.AuthAuthorizationDataAction.reloadTransactions(AuthAuthorizationDataAction.java:4128)
at com.virsa.re.role.actions.AuthAuthorizationDataAction.execute(AuthAuthorizationDataAction.java:157)
at com.virsa.framework.NavigationEngine.execute(NavigationEngine.java:273)
at com.virsa.framework.servlet.VFrameworkServlet.service(VFrameworkServlet.java:230)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
at com.virsa.framework.servlet.VFrameworkServlet.service(VFrameworkServlet.java:286)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
at com.virsa.comp.history.filter.HistoryFilter.doFilter(HistoryFilter.java:43)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:384)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:219)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176) -
Types Does not Exist Error in Function Module creation
Hi Guys
I am trying to replicate the functionality of the below program using a function module. However when I enter the following in the changing tab of the fn mod, I get error TYPE IT_VBRP does not exist.
Parameter name p_it_vbrp like it_vbrp
<removed by moderator>
Moderator message: please post only relevant code parts, your posts must contain less than 5000 characters to preserve readable formatting.
Edited by: Thomas Zloch on Sep 11, 2011 3:55 PMHi
The reference type of a parameter of the interace of function module has to be defined in dictionary, if you need to use a particular type, you need to create an your own custom type pool or try to looking for a type defined like yours,
For example if you need a table based on vbrp, you can use the table type TAB_VBRP
Max
Maybe you are looking for
-
Error Message when starting Object Manager on the Client
I�ve installed sgd 4 successfully and I can start applications - except Array- and Objectmanager from my client. Here I get the message ErrTransportNotAvailable ErrTransportNotAvailable Standard error of script process: Third tier output log: Any ide
-
Apple TV loosing connection to TC.
My two Apple TVs cannot stay connected to the Time Capsule. Everything worked fine with the AEBS but the connection keeps getting lost with TC. The Apple TV shows that the network connection is fine but no internet connection is available (no itunes
-
PLEASE HELP--gotoandPlay plays through frames I dont want it to.
Hello--I am an architecture student and I am having problems with my Flash website. I have uploaded my half-done website on http://ilocker.bsu.edu/users/msgoyak/WORLD_SHARED/ My animations end on frame 311, where I have five buttons linking to differ
-
Java...is it the best ?
should i learn java? is it really that great...i know pascal and would like to expand my programming...im also interested in web design...
-
Sales of same material with and without batch
Hello Experts, One of my requirement is To sell single material from same plant 1)with batches and 2)Without batches Will this be possible in R/3 and how? Please suggest. NVS