Function module "/SAPAPO/CIF_CBASE_INB" not found.

Dear,
When I want to CIF the sales orders from ECC to TM 8.0 system. I get this short dump in TM. This function(/SAPAPO/CIF_CBASE_INB) is not available in TM. Is there any idea about how I can solve it?
Regards,
Mehmet YILMAZ

Sorry Mehmet, I missed it in your thread. Why are you CIF'ing your sales orders to TM instead of setting up the standard connector (in PI/XI)?
Regards,
Mike

Similar Messages

Function Module " /Crystal/GET_FUNCAREA_CATALOG" not found

Good day Masters
I am not able to connect to our SAP ECC6.0 because of the below error
Function Module " /Crystal/GET_FUNCAREA_CATALOG" not found
is this function modules exists on the transport files ? do you think by executing the transport this problem will be resolved ?
and how we can execute the transport files from Basis perspective ,,, our basis tried to execute this transport to they got belw error
" file might be currapted "
Regards

Hi
your BASIS administrator should copy the transport files in the import queue and use the STMS transaction to import them in your system. Make sure to import the UNICODE version in the order as shown in the transports_<your language>.txt file.
Make sure that the files are indeed imported.
Which version of BOBJ are you using?
Regards,
Stratos

Preview error function module "CRYSTAL/MDX_GET_STREAM_INFO" not found

Hi,
I cannot preview the report I created in Crystal Report 2008. Here is 1st error message "Failed to retrieve data from the database. Then the 2nd error message is "Database connector error: : Function module 'CRYSTAL/MDX_GET_STREAM_INFO' not found. My data source is from MDX query.
Thanks in advance.
Rose

Hi
Contact your basis administrator to ensure
- All the transports have been installed properly.
- Check the version of Crystal Reports and BusinessObjects and the SAP MDX driver version.
For CRXIR2 +BOXIR2 this issue was resolved in CHF15.
Regards
Sourashree

Dump:Function module "/GRCPI/GRIA_SPM_SYNC" not found

Hello Experts,
When executing EAM Master Data Synch from GRC system, a short dump results with the description "/GRCPI/GRIA_SPM_SYNC" in Plugin system ( Basis 640 ).Plugin system is at latest patch level ( GRCPINW SP12 ).we found that no function module available in plugin system.Could you please suggest or recommend any fix ? your help is much appreciated.
Regards,
Rajan

Rajan,
I connected GRC 10.0 to Plugin system which is on Basis 640. But gettign similar ABAP dum as you"
The function module "/GRCPI/GRIA_SPM_SYNC" was called, but cannot be found in the Function Library". I Already implemented following SAP notes:
0001941542 CALL_FUNCTION_NOT_FOUND dumps on running EAM Sync job or FF
0002062450 EAM function modules are missing in 640 and 620 releases
How did you resolve this issue?

CIF Error - FM /SAPAPO/CIF_PROD_INBOUND not found

Hi Experts,
I am configuring CIF on a fresh ECC & APO system, I have made the required configurations, but when i am trying to CIF the Location-Product, it failed
The blocked queue gave the termination message with :-
Function Module / SAPAPO/CIF_PROD_INBOUND not found &
Function Module / SAPAPO/CIF_GEN_EVENT not found
When I checked the result on the APO side, to my surprise, I am able to see the Locations getting created but no product.
Please suggest.
Regards
Manu

Manu,
You can suppose anything you wish. Better, though, to actually find out. The userid I am talking about is the userid found in your ERP-to-SCM RFC connection, which is determined by YOUR company. I cannot say if the userid is RFCUSER since I have no access to your system.
So, in ERP, SM59 > select ABAP connections > select the RFC connection used to connect to your SCM system. Under the Logon & Security tab will be the name of the Userid that core interface will be using to 'talk' to SCM. Write down this userid.
Now log onto SCM, and do SU01 on that userid. Review his authorizations. It is OK to assign SAP_ALL to this userid for development purposes as a temporary measure. Probably a good idea to make him 'dialogue' as well until all of your interface debugging is done.
In order to determine errors with interface, refer to the logs in SCM. In SCM, SLG1 > Object CIF, everything else all asterisks, select a suitable date range. If you see no logs, you probably need to turn on logging /SAPAPO/C4
I strongly recommend that you thoroughly read the 2 documents I posted earlier. If this is your first try at connecting an ERP to an SCM system, the time will be well spent.
Best Regards,
DB49

How to use the Function module /SAPAPO/CIF_ORDER_INBOUND

Hi Gurus,
I need to tick planned order conversion (CNVIN) indicator in APO planned order to convert it into manufacturing order through some program. I found one function module /SAPAPO/CIF_ORDER_INBOUND to do so. But i don't know how to use it. Can you please tell me what are the input i should maintain in this FM?
Regards
Rajib Pathak

Hi Rajib
/SAPAPO/CIF_ORDER_INBOUND is the FM called by the queued RFC process known as the CIF. If you use this FM then you will trigger potential errors in the CIF queue and application log. I do not recommend you use this FM except to see what the code does.
You can use /SAPAPO/RRP_ORDER_SET_CNVIN passing only ordid, set_cnvin = X, dialog = space and merge_not_allowed = space - be sure to create simsession using /SAPAPO/RRP_SIMSESSION_CREATE or retrieve it using /SAPAPO/RRP_SIMSESSION_GET. If you want immediate OLTP transfer then set old_olpttransfer to 0 - see values in domain /SAPAPO/OM_OLTPTRANSFER.
There is a standard program to convert orders /SAPAPO/RRP_ORDER_CONVERSION. You may be able to use this instead of reinventing it? Or at least see what's happening under the covers.
Andy

Error while reading data using Function Module /sapapo/msdp_data_read

In my report, function module /sapapo/msdp_data_read is called to get the data from a planning area.
The problem is that, the values returned by this FM are not correct.means its returning wrong Key_figure values.
On checking it was observed that , in the import parameter is_read_options ,
the field flg_aggregate = 'X'.
In Debug mode i cleared this field and called the FM and it returned the correct values.
Can anybody plz tell me what is the relevance of this field flg_aggregate .
Kindly guide.
Thnk you in advance.
Regards ,
Pranali

Dear Pranali,
FLG_AGGREGATE has following importance:
if FLG_AGGREGATE = 'X' and the table ct_cols is empty then key figures for the time period defined through IS_PERIOD will be red aggrerated.
I hope this helps.
Regards,
Tibor

Compilation error - FPGA NI PXI-7951R board - ERROR: Xst: 2472 - Top module Puma15Top was not found.

I'm trying to compile a "user CLIP socket" for the NI PXI board - 7951R which has a Virtex-5 LX30 FPGA from Xilinx, but I got the bellow message from NI Compiler, this message is in error report Xilinx.log.
It says that module Puma15Top was not found.
But this module is a NI property and is automatically compiled by NI Compiler.
The compiler automatically generates these files (Puma15Top...) that are passed to the compiler of Xilinx. The Puma15Top files are in the path, i.e: C: \ NIFPGA \ compilation \ Told_F_I_CC5DC260 \ source_files.
This folder name is automatically generated by labview (Told_F_I_CC5DC260) for each different project or compilation.
So I have no way to configure in CLIP files where it'll be Puma15Top, once the path is automatically generated during compilation by Labview.
Does anyone have any idea how to solve this problem? Or have you experienced some like this?
Following error log:
### XstSynthesis ###
Puma15Top
Reading design: Puma15Top.prj
=========================================================================
*                          HDL Compilation                              *
=========================================================================
Compiling vhdl file "C:/NIFPGA/jobs/Cm9xA8x_LaF6U1d/CLUC001_Conf.vhd" in Library work.
Entity <CLUC001_Conf> compiled.
Entity <CLUC001_Conf> (Architecture <behavioral>) compiled.
Compiling vhdl file "C:/NIFPGA/jobs/Cm9xA8x_LaF6U1d/CLUC001_CLIP.vhd" in Library work.
Entity <CLUC001_CLIP> compiled.
Entity <CLUC001_CLIP> (Architecture <rtl>) compiled.
Entity <CLUC001_CLIP> (Architecture <behavioral>) compiled.
ERROR:Xst:2472 - Top module <Puma15Top> was not found.
ERROR:Xst:2469 - Please specify the correct library via the -work_lib switch.
-->
Total memory usage is 149596 kilobytes
Number of errors   :    2 (   0 filtered)
Number of warnings :    0 (   0 filtered)
Number of infos    :    0 (   0 filtered)
Process "Synthesis" failed
Thanks in advanced!

Hi Guilherme,
Thanks your suggestion, I upgraded NI-RIO to 13.1.1 version but the problem persists, as shown below:
Project: T_old.lvproj
Target: F (RIO0, PXI-7951R)
Build Specification: I_2
Top level VI: I.vi
Compiling on local compile server
Compilation Tool: Xilinx 11.5
Start Time: 2/9/2014 18:03:51
Run when loaded to Fpga: FALSE
JobId: z8Cq8B4
Working Directory: C:\NIFPGA\compilation\Told_F_I2_F3177096
Compilation failed due to a Xilinx error.
Details:
ERROR:Xst:2472 - Top module <Puma15Top> was not found.
ERROR:Xst:2469 - Please specify the correct library via the -work_lib switch.
-->
Total memory usage is 149596 kilobytes
Number of errors   :    2 (   0 filtered)
Number of warnings :    0 (   0 filtered)
Number of infos    :    0 (   0 filtered)
Process "Synthesis" failed
Start Time: 18:03:51
End Time: 18:05:19
Total Time: 00:01:27,414
Best,
JEMP

BAPI function module 'BAPI_PO_CHANGE' is not updating aacural condition

Dear All,
BAPI function module 'BAPI_PO_CHANGE' is not updating aacural condition in PO pricing. Please give me a right solution on this query.
Below I have given my code.
Thanks and Regards
Makarabd
poitem-po_item = '00010'.
poitem-net_price = '1060.00'.
poitem-period_ind_expiration_date = 'D'.
APPEND poitem.
poitemx-po_item = '00010'.
poitemx-po_itemx = 'X'.
poitemx-net_price = 'X'.
APPEND poitemx.
select single * from ekko where ebeln = po_no.
pocond-itm_number = '00010'.
pocond-cond_type = 'ZVCU'.
pocond-cond_value = 10.
pocond-currency = '%'.
pocond-STAT_CON = 'X'.
pocond-accruals = 'X'.
pocond-change_id = 'I'.   " I - Add , U - Update , D - Delete
APPEND pocond.
pocondx-itm_number = '00010'.
pocondx-itm_numberx = 'X'.
pocondx-cond_type = 'X'.
pocondx-cond_value = 'X'.
pocondx-currency = 'X'.
pocondx-change_id = 'X'.
pocondx-STAT_CON = 'X'.
pocondx-accruals = 'X'.
APPEND pocondx.
   CALL FUNCTION 'BAPI_PO_CHANGE'
        EXPORTING
          purchaseorder          = po_no
        TABLES
          return                 = return
          poitem                 = poitem
          poitemx                = poitemx
          pocond                 = pocond
          pocondx                = pocondx.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'.

Hi ,
Are you trying to pass the non char fields in CI_COBL. Please look at the link below .
[http://forums.sdn.sap.com/thread.jspa?threadID=1137795] .
Also serach for the similar threads when and notes while transferring currency and quantity field in different custom includes of the EKPO ...
Thanks,
Anjaneya .

Request having function group released but function module attribute shows not released

Hi experts,
I am a beginner.
There is a transport request in which my function group and other objects were present . This transport request and its task were released . But if i check the attributes section of the function module that is present in that function group , it shows not released .
Is there some problem ? did the function module not get released with its group? It wasn't showing anywhere in the request even though i had added it during creation.
Here is the image :
Thanks,
Unnati

Hi,
Those two meanings of 'released' are unrelated. Don't worry about it.
Also, a function module sometimes does not explicitly appear in a transport request, if the function group is already in there.
cheers
Paul

Function module WWW_ALV_CALL is not released for the Internet

Hi
I am facing this error Function module WWW_ALV_CALL is not released for the Internet and Only user SAP can release the function module.
Best Regards
GAGAN

hi,
This Web based calls are not available anymore in Netweaver 2004s/7.0.
More information in SAP-Note: 910202
Hope this helps
regards
Tobias

Function module RSD_ZIO_ALM02_TXT_GET does not exist

Hi
I am trying to copy the data from one info cube to another info cube with the read master data in transformation rule for some of the info object. This exercise I have done many times successfully for the same structure but suddenly I am getting this error without doing any changes
'Function module RSD_ZIO_ALM02_TXT_GET does not exist'
After getting this error I have delete the transfer rule for above object than the some error are coming for the another info object which also used for read master data.
Kindly help me .(we are working on ECC 6)
Thanks and Regards
Vinay

Hi Vis
I tried this one also but its not working. All the info objects are active and I tried after reactivating also but still error exits.
Thanks and regards
Vinay

Function module RSD_ZBCSASSET_TXT_GET does not exist

Hi,
We are working with SEM-BCS 6.0 (SAP BI 7.0), and I want to trasfer master data of a infoobject from BI to SEM BCS through load from data stream task.
When I going to execute the task the system display the next message Function module RSD_ZBCSASSET_TXT_GET does not exist. Message no. EU802.
Thanks in advanced
Carlos

Same error occured in a planning sequence of mine. The related characteristic did not have texts.
The error occured after the addition of a navigational attribute to the MultiProvider.
Solution: re-activate the aggregation level.
Late, but hope that helps...

Calling a remote enabled function module which does not exist in caller sys

Hi,
I have a a system ABC from which I am trying call a rfc enabled fm(Test) present in system XYZ.
The fm(Test) does not exist in the system ABC so I am getting generation errors and dumps.
Is there a way for me to call these remote enabled function modules which does not exist in the caller system without the obvious errors etc.
Is there any special way.
Thanks

Hi,
please check this sample:
REPORT zcallfm                                 .
DATA: xv_return TYPE sysubrc.
CALL FUNCTION 'DOESNOTEXIST'
DESTINATION   'NOWHERE'
EXPORTING     caller                = sy-sysid
IMPORTING     return                = xv_return
EXCEPTIONS    system_failure        = 1
              communication_failure = 2
              OTHERS                = 4.
It shouldn't throw any generation errors in your system!
Regards,
Klaus

Function Module SWK_LOCAL_INBOX_GET does not exists

Hi,
I configured UWL in the Portal.
When i am trying to acess UWL, throwing an exception.
it says "Exception type:com.sap.netweaver.bc.uwl.connect.ConnectorException Message:Thu Apr 12 15:58:26 GMT+05:30 2007 :Function Module SWK_LOCAL_INBOX_GET not found"
Can anyone help me what could be the problem.
Rgds,
Kiran Joshua

Hello Kiran,
at least the user needs to have the Role SAP_BC_SRV_GBT_USER in backend.
My only other idea is to check the existance of the plugin (WP-PI) in R/3.
But, in a similar situation (missing plugin in R/3) i got the ConnectorException "Failed getting the following function metadata from repository: URL_SERVER_TYPE_DATA_GET".
Perhaps a trace in R/3 could assist you?
Sorry, no more ideas, regards

Function module "/SAPAPO/CIF_CBASE_INB" not found.

Similar Messages

Maybe you are looking for