Function module to calculate capacity requirements of production order

HI
Hav a requirement to calculate capacity requirement for production orders like we see in cm50... does anyone know a function module to calculate capacity requirement?

Hi All,
Just to reopen this issue, even I am looking for a similar functionality.
To reinstate the requirement:
I want to find shifts and corresponding capacities for a work center. These details are obtained from CR03 and CR13 transaction.
If possible do let me know Function module or tables for the same.
Debs

Similar Messages

Function Module to Calculate Capacity per Shift.

Hello SAPients.
I have to create a report where I have to distribute the production requirement (table KBED) in different shifts. I tried to calculate the values with normal calculation in programming but it's getting too complicated finding the right amounts per shift. For example, I have a requirement of 100 CAses and 3 shifts for the 09/10/2006, the output should be 50 in first shift and 25 for the second and the third shift. I have to consider the capacity of the Work Center and the Shift.
Do you know of a function module to achieve this?
Thank you in advance for your help.
Message was edited by: Ricardo Fernández Vázquez

Hi All,
Just to reopen this issue, even I am looking for a similar functionality.
To reinstate the requirement:
I want to find shifts and corresponding capacities for a work center. These details are obtained from CR03 and CR13 transaction.
If possible do let me know Function module or tables for the same.
Debs

Functional module for component overview screen in production order

Hi All,
My requirement is,
If I am replacing component in BOM then same I need to replaced in existing production ordder. My input will be old item code(BOM component), new item code, plant, production order(If I do not give prdn order as input then system have to find out all possible enteriesl), order status.
Can you tell me any functional module or any logic which can serve this purpose. Here I am having two requirements,
1. To find out all possible production orders in which old item is used
2. To replace old item by new item

Dear Chetan,
if QM recoeding & UD has not taken place, then
1) Cancle the GR, Confirmation & GI of orders (if Auto GI & GR is activated)
2) if both are activated, then just cancle the order in CO13
3) then Go for READ PP MASTER DATA, it will work for You
Regards
kumar
Edited by: kumar kumar on Sep 29, 2009 9:21 AM

Function module to calculate Estimate delivery lead time

Hi Experts,
It's ugrent.
In APO System,
I need a function module to calculate the estimated delivery lead time, The estimate delivery lead time is the time in weeks between the current date and the estimated delivery date. This is rounded up to the next integer value.
Thanks in advance,
Regards
Adil

Hi Vishal,
I've declared two variables
DATA: LDATE(20),
           LTIME(20).
CALL FUNCTION 'GET_SYSTEM_TIME_REMOTE'
IMPORTING
K_DATE        =
K_TIME         =
   L_DATE         = LDATE
   L_TIME          = LTIME
AND IN THE FORM HEADER I'VE GIVEN IT AS,
WA_HEADER-TYP = 'S'.
WA_HEADER-INFO = ': Date'.
WA_HEADER-KEY = LDATE.
APPEND WA_HEADER TO IT_HEADER.
WA_HEADER-TYP = 'S'.
WA_HEADER-INFO = ': Time'.
WA_HEADER-KEY = LTIME.
APPEND WA_HEADER TO IT_HEADER.
STILL IM NOT GETTING WAT ELSE IS REQUIRED ?

Function module to calculate Variable-Size Item

I am creating a report for manual reservation. User wants to calculate quantity of material if he enters size1, size2 and size3. Also he wants that a formula key option to be provided so that he can mention conversion formula. Is there any standard function module to calculate quantity?

Hi Vishal,
I've declared two variables
DATA: LDATE(20),
           LTIME(20).
CALL FUNCTION 'GET_SYSTEM_TIME_REMOTE'
IMPORTING
K_DATE        =
K_TIME         =
   L_DATE         = LDATE
   L_TIME          = LTIME
AND IN THE FORM HEADER I'VE GIVEN IT AS,
WA_HEADER-TYP = 'S'.
WA_HEADER-INFO = ': Date'.
WA_HEADER-KEY = LDATE.
APPEND WA_HEADER TO IT_HEADER.
WA_HEADER-TYP = 'S'.
WA_HEADER-INFO = ': Time'.
WA_HEADER-KEY = LTIME.
APPEND WA_HEADER TO IT_HEADER.
STILL IM NOT GETTING WAT ELSE IS REQUIRED ?

Function Module to calculate Open Contract Quantity

Hi All,
Is there a function module to calculate Open Contract Quantity?
Thanks.

Hi Ravi,
Thanks for the reply.
For this FM, i need to pass the Sales Doc Number. Is there an FM where i can pass the contract number?
Best regards,
Sindy

Function module to calculate available budget

Hi everyone
Is anybody aware if there is any function module which calculates the available budget from the report alr_87013558?
thanks and kind regards

thanks Paolo
yea, i tried to debug that report but in vain
is there any other way?
I could get the value assigned, the budget value but not the actual
So was wondering if anybody can help me
thanks for your help

Function Module to calculate pallets

Hi,
I need a Function Module to calculate pallets for free of charge articles while creating a sales order.
can someone name any FM for this purpose.
Thanks in advance

Hi Abhishek,
Check FM L_PALLET_SUGGESTION.
Hope this helps.
Thanks
Lakshman

Function module to calculate due date of FI document

Hi All
I need a function module to calculate the due date of FI document considering BSId Zterm ( Payment terms ) Document date , Basline date .
Regards,
chitra

call function 'FI_TERMS_OF_PAYMENT_PROPOSE'
exporting
    i_bldat         = gv_bldat
    i_budat         = gv_budat
    i_cpudt         = sy-datum
    i_zfbdt         = gv_zfbdt
    i_zterm         = gv_terms_paym
    i_bukrs         = gv_comp_code
importing
    e_zbd1t         = gv_zbd1t
    e_zbd2t         = gv_zbd2t
    e_zbd3t         = gv_zbd3t.
faede-shkzg = 'H'.
faede-koart = 'K'.
faede-zfbdt = gv_zfbdt.
faede-zbd1t = gv_zbd1t.
faede-zbd2t = gv_zbd2t.
faede-zbd3t = gv_zbd3t.
faede-bldat = gv_bldat.
call function 'DETERMINE_DUE_DATE'
    exporting
      i_faede = faede
    importing
      e_faede = faede.
*    if sy-subrc eq 0.
duedate = faede-netdt. <<<<<< ------

Function module to calculate withholding taxes

Hi all,
Can anyone please tell me if there is any function module to calculate withholding taxes?
Thanks,
Diogo LF Moreira

Hi,
You can use the function module FI_WITHHOLDING_TAX_CALCULATION
Regards,
SDNer

Function module to calculate WBS Remaining Plan

Hi all,
Is anyone know if there is Function Module to calculate WBS remaining plan?
thanks,
libl69

Try function MD_CONVERT_MATERIAL_UNIT
the table of UOM's is MARM.
Doug

Function module to change price of uploaded product

Hi Gurus,
is there any function module to change price of uploaded product info in crm
regards
Naveen
Edited by: Naveen Kumar on Feb 13, 2009 12:05 PM

condition record can modify using FM 'CNFPR_RECORD_PUT'

What is the function module to calculate "years of services" in HR?

What is the function module to calculate "years of services" in HR?

hi ,
following function module will help you to find the years of service
CALL FUNCTION 'HR_HK_TOTAL_YOS' "HR-HK: Calculate an employee's total years of service
EXPORTING
    years1 =                    " pea_scryy     Years of service
    months1 =                   " pea_scrmm     Months of service
    days1 =                     " pea_scrdd     Days of service
    years2 =                    " pea_scryy     Credit years of service
    months2 =                   " pea_scrmm     Credit months of service
    days2 =                     " pea_scrdd     Credit days of service
output_format = '01'        " char2         Format to display the output
IMPORTING
    years =                     " pea_scryy     Total years of service
    months =                    " pea_scrmm     Total months of service
    days =                      " pea_scrdd     Total days of service
    . " HR_HK_TOTAL_YOS
thanks u..

Function module to calculate quantity of unrestricted stock

Is there any function module to calculate the quantity of unrestricted stock in alternate units of measure.
For example we have a material '123456', its unit of measure is 'EA'(eaches) and we have 172 'EA'.
but this material can be issued only in boxes. Each box has 50 'EA.
I believe that SAP has a standard function module to convert the quantity, because the quantity gets updated in transaction 'MMBE' depending on our UOM selection.
If not can you please let me know which table stores the relation between the UOMs.
Thank you,
Goldie.

Try function MD_CONVERT_MATERIAL_UNIT
the table of UOM's is MARM.
Doug

Function module which calculates GL balances

Hello to you all,
I am looking for a function module which calculates balances for GL account as Tcode FS10N do.
I would like to implement this FM in an ABAP program,
Thanks,
Amir

Hi
Check the Code, if it could be of use to you
http://www.sapfans.com/forums/viewtopic.php?f=10&t=317349
Regards
Sanil Bhandari
Edited by: Sanil K Bhandari on Jun 29, 2011 6:17 PM

Function module to calculate capacity requirements of production order

Similar Messages

Maybe you are looking for