Function module to delete a user

Hello, is there any FM that i can use to delete a user(SUO1)?

hi,
try this
/VIRSA/AE_HRMS_DELETE_USER
you may chech the followings
HR_SELID_DELETE_USER
DELETE_USER_ON_DB
Regards,
Anirban

Similar Messages

Which function module to delete job log?

Hi, I submit report via jobname and jobcount. After I close job and run it, we can see jobname is still in job log by SMX. But client doesn't want to see it, so who can kindly tell me which function module can delete jobname from job log?
Thanks a lot.
Jack

try CALL FUNCTION 'BP_JOB_DELETE'
If you have used JOB_OPEN before the SUBMIT to create the job, you can automatically delete the job upon successful completion by setting the parameter DELANFREP = 'X' in the JOB_OPEN function call.. this way the user will only see the logas for cancelled/aborted jobs..
~Suresh
Message was edited by: Suresh Datti

Function module to modify the user roles & profiles

Hi All,
I am working on user maintenance and i need a function module to modify the user roles & profiles.
Thanks in Advance.
Phani.

i used the below fms
BAPI_USER_ACTGROUPS_ASSIGN for assigning the roles.
delete the profiles of the user qnd assign the profiles to the user:
BAPI_USER_PROFILES_DELETE
BAPI_USER_PROFILES_ASSIGN
i used the above FMs for my requirement.
Regards,
Phani.

Is there any BAPI or function module to delete entries from a table (VBAK)

Hi Everybody,
this is my first thread in SDN...
my problem follows...
A report is be created that selects all sales orders created by e-Sales that are more than 20 minutes old and still have a delivery block:
tables:
VBAK     sales document: header data
selection fields:
VBAK-LIFSK      ≠     <BLANK>
VBAK-ERNAM     =     userID used by e-Sales / IVE
          (EP-BATCH / EAI-BATCH)
VBAK-ERDAT      <=     Current system Date
VBAK-ERZET     <=     Current system Time - 20 minutes
These orders should be deleted from SAP system.
This report should be scheduled to run regularly every 10 minutes.
my doubt : is ther any BAPI or Function module to delete entries from a standard table...if no what is the way to delete the enteries from a std table...
best replies will be rewarded....
regards
Reddy

Hi Vasanth ,
thanks for your reply.
i tried in the same manner what u mentioned.
but how to pass only one parameter to the functionmodule..
here in this case we have to pass only update flag as 'D'..
i did the same it giving dump..
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught and
therefore caused a runtime error.
The reason for the exception is:
The call to the function module "BAPI_SALESORDER_CHANGE" is incorrect:
In the function module interface, you can specify only
fields of a specific type and length under "ORDER_HEADER_INX".
Although the currently specified field
"INT_ORDER_HEADER_INX" is the correct type, its length is incorrect.
my pgm :
*& Report YNEW_ORDER_DELETION
REPORT ynew_order_deletion.
TABLES:vbak.
PARAMETERS:
     p_lifsk LIKE vbak-lifsk DEFAULT '02'.
SELECT-OPTIONS:
   s_lifsk FOR vbak-lifsk DEFAULT '10',
    s_ernam FOR vbak-ernam,
    s_erdat FOR vbak-erdat,"DEFAULT sy-datum.
    s_erzet FOR sy-uzeit.
*PARAMETERS:
p_erzet LIKE sy-uzeit.
   s_erdat like vbak-erdat,
   s_erzet like vbak-erzet.
DATA:
   BEGIN OF int_final OCCURS 0,
        w_vbeln TYPE vbak-vbeln,
   END OF int_final.
DATA:
int_return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
DATA: int_order_header_inx LIKE bapisditmx OCCURS 0 WITH HEADER LINE.
DATA:
wf_time TYPE sy-uzeit.
INITIALIZATION.
s_ernam-low = 'KULKARMA'.
s_ernam-sign = 'I'.
s_ernam-option = 'EQ'.
APPEND s_ernam.
s_ernam-low = 'EAI-BATCH'.
s_ernam-sign = 'I'.
s_ernam-option = 'EQ'.
APPEND s_ernam.
wf_time = sy-uzeit - 1200.
p_erzet = sy-uzeit - 1200.
p_erzet-low = wf_time.
APPEND s_erzet.
int_order_header_inx-updateflag = 'D'.
APPEND int_order_header_inx.
START-OF-SELECTION.
SELECT vbeln FROM vbak
                   INTO TABLE int_final
                   WHERE lifsk EQ p_lifsk
                     AND ernam IN s_ernam
                     AND erdat IN s_erdat
                     AND erzet IN s_erzet.
IF sy-subrc = 0.
    LOOP AT int_final.
      CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
        EXPORTING
          salesdocument         = int_final-w_vbeln
ORDER_HEADER_IN             =
    order_header_inx            = int_order_header_inx
SIMULATION                  =
BEHAVE_WHEN_ERROR           = ' '
INT_NUMBER_ASSIGNMENT       = ' '
LOGIC_SWITCH                =
NO_STATUS_BUF_INIT          = ' '
        TABLES
          return                      = int_return
ORDER_ITEM_IN               =
ORDER_ITEM_INX              =
PARTNERS                    =
PARTNERCHANGES              =
PARTNERADDRESSES            =
ORDER_CFGS_REF              =
ORDER_CFGS_INST             =
ORDER_CFGS_PART_OF          =
ORDER_CFGS_VALUE            =
ORDER_CFGS_BLOB             =
ORDER_CFGS_VK               =
ORDER_CFGS_REFINST          =
SCHEDULE_LINES              =
SCHEDULE_LINESX             =
ORDER_TEXT                  =
ORDER_KEYS                  =
CONDITIONS_IN               =
CONDITIONS_INX              =
EXTENSIONIN                 =
    ENDLOOP.
    LOOP AT int_return.
      WRITE:/ int_return-type,
              int_return-id,
              int_return-number,
              int_return-message.
    ENDLOOP.
ENDIF.
please help me ..its a very urgent issue to be solved...
am waiting for ur reply...
regards
gangareddy

Program or Function module to delete data from Open Hub Destination Table

Hi All,
Can anybody suggest me a Program or Function module to delete data from Open Hub Destination Table.
Thanks & Regards,
Vinay Kumar

You can simply goto t-code SE14 mention the open hub destination table and Delete data by clicking on "Activate and Adjust database" with radio button "Delete Data".
Regards,
Arminder

Search for a function module for deleting document originals (DMS)

Hi,
I'm searching for a function module to delete originals in documents (like manually with transaction cv02n). I'm only able to set an delete mark with the module 'BAPI_DOCUMENT_DELETE'.
The module 'BAPI_DOCUMENT_CHANGE2' can only add new originals to an existing document. I need a possibility to delete all originals in an document without deleting the document itself.
Has anyone an idea?
Thanks.
Jan-Christian Treusch

Many thanks!
That's especially the method I've searched for so long....
best regards.
Jan-Christian Treusch

Function Module to Delete ODS Data based on Request

Hi All,
Is there any specific function module to delete ODS data based on Request.
I found the program RS_DEL_ODS_1 which is using the FM RSAR_ODS_API_DEL.
But this FM is deleting the request at PSA level.
Is there any alternate FM?Or is there any ABAP Program or so?

Hi,
Deletion of specific request is not perimitted for ODS objects. You can delete the most recent request, but if you delete any previous requests, all the requests up to that request will also be deleted.
You can do it by write an ABAP program to identify the specific requests to be deleted for ODS.
Regards
CSM Reddy

Function Module to change the user status of a business transaction

Hi,
I want to change the user status of a business transaction. Plz let me know if there is a function module to change the user status.I found some FMs.
- CRM_STATUS_MAINTAIN_OW
- BBP_PROCDOC_STATUS_CHANGE_DIRE
- CRM_ORDER_CHANGE_STATUS
But these FM says that it has to be used for changing system status.
Thanx,
Sivagami.R

hi Siva,
here is some sample code :
data :
ip_guid            type crmt_object_guid,
ls_status            type crmt_status_com,
lt_status            type crmt_status_comt,
ls_input_field       type crmt_input_field,
ls_input_field_names type crmt_input_field_names,
lt_input_fields      type crmt_input_field_tab,
lt_obj_guids         type crmt_object_guid_tab,
ip_guid = <your guid>.
ls_status-ref_guid = IP_GUID.
ls_status-ref_kind = 'A'.
ls_status-status = lv_newstat.
ls_status-user_stat_proc = 'ZCRMCOM1'.
ls_status-activate   = 'X'.
INSERT ls_status INTO TABLE lt_status.
ls_input_field-ref_guid = IP_GUID.
ls_input_field-ref_kind = 'A'.
ls_input_field-objectname = 'STATUS'.
ls_input_field_names-fieldname = 'ACTIVATE'.
INSERT ls_input_field_names INTO TABLE ls_input_field-field_names.
INSERT ls_input_field INTO TABLE lt_input_fields.
ls_input_field_names-fieldname = 'STATUS'.
INSERT ls_input_field_names INTO TABLE ls_input_field-field_names.
INSERT ls_input_field INTO TABLE lt_input_fields.
insert IP_GUID into table lt_obj_guids.
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
EXPORTING
    it_status       = lt_status
CHANGING
    ct_input_fields = lt_input_fields.
CALL FUNCTION 'CRM_ORDER_SAVE'
EXPORTING
    it_objects_to_save = lt_obj_guids
EXCEPTIONS
    OTHERS              = 2.
COMMIT WORK.
please award points if helps
cheers

Need functional module or table for user type

Hi all,
I need table or a functional module for getting the user type. plz help

Hi,
Can you explain your requirement in a bit more detail. You can also provide all the relevant information regarding this topic.
Hope this will help.
Thanks,
Samantak.

Is their any function module for deleting condition record i am trying

Hi Experts,
Is their any function module for deleting condition record i am trying this way.......
DATA: TABLE (4) TYPE C.
DATA: KNUM LIKE KONH-KNUMH
DATA: K_VEWE LIKE T681-KVEWE VALUE 'A'.
DATA: T681_STR LIKE T681.
DATA: LV_NUM TYPE I.
GET PARAMETERS
PARAMETERS: TABNO LIKE T681-KOTABNR.
PARAMETERS: TESTMODE DEFAULT 'X' AS CHECKBOX.
REFRESH INT_KNUMH.
Select single * from T681 into T681_STR
where kvewe = K_VEWE AND
KOTABNR = TABNO.
IF SY-SUBRC NE 0.
WRITE: / 'No entry in T681 for number ', TABNO.
WRITE: / 'Check whether corresponding condition table exists.'.
EXIT.
ENDIF.
TABLE = T681_STR-KOTAB.
SELECT KNUMH FROM (TABLE) INTO KNUM.
SELECT SINGLE * FROM KONH WHERE KNUMH = KNUM.
IF SY-SUBRC NE 0.
INT_KNUMH-KNUMH = KNUM.
COLLECT INT_KNUMH.
ENDIF.
ENDSELECT.
DESCRIBE TABLE INT_KNUMH LINES LV_NUM.
IF LV_NUM EQ 0.
WRITE: / 'No inconsistent entries found.'.
WRITE: / 'Each record in the condition table has a corresponding.'.
WRITE: / 'entry in the KONH table.'.
EXIT.
ENDIF.
LOOP AT INT_KNUMH.
IF TESTMODE IS INITIAL.
DELETE FROM (TABLE) WHERE
KNUMH = INT_KNUMH-KNUMH.
IF SY-SUBRC = 0.
WRITE: / 'KNUMH =', INT_KNUMH-KNUMH(10), ' deleted from table ' ,TABLE.
ELSE.
WRITE: / 'DELETE: SY-SUBRC is', SY-SUBRC , ' FOR KNUMH = ' .
WRITE: INT_KNUMH-KNUMH(10).
ENDIF.
ELSE.
WRITE: / 'TESTRUN: KNUMH =', INT_KNUMH-KNUMH(10).
ENDIF.
ENDLOOP.
is their any Standerd Function module for comparing tables if the condition record not exist in it has to exit if it is their then compare those two tables if not exist in one table also that has to be delete the condition record
Please let me know .....

Hi,
You can use Function module PRICING_CHECK to check condition record. Do a where-used list on it to see how to call it.
Regards
Kiran Sure

Function module to delete TOP-N Products

Hi All,
We have a requirement wherein we need to write a report program to delete TOP-N Products at Item level ( TCODE: CRMM_PPR_TOPN).
Kindly let me know if you know any function module to delete these products.
Thanks in advance,
Keya

Question:
1. Do you want to delete the product that is listed in the Top-N?   or
2. Get rid of the Top-N list ?
You have already put this question and you have got lot answers for (1).
If it is (2), then here are some thoughts about it.
Top-N list products are a result of what you maintain in BI parameter ID in the CRM configuration. Actually it is a result of a "query" to BI - in a way...
Tcode: SPRO to IMG.
In IMG, go to
CRM
    Marketing
        Product Proposals
            Define BI parameters ID for Top n Lists
So, if you don't want to see the products in the list, change the parameter ID or get rid of it.

Function module to delete employee

Hi experts is there any function module which deletes a complete pernr

I am not sure about function module but you can use program RPUDELPN for the same.
PU00 transaction can also be used.

Function module to delete script and forms

CAn anybody pls tell me whether ther is ny function module
to delete SAPSCRIPT and SMARTFORMS
Thanks .

Hello,
You cannot transport the deletion of a single language of a Sapscript form.
Please also see SAP note 3355 about it. The deletion of a form is only transported,
if the complete form was deleted in all languages and all clients.
But what you can try to do is to run the function module DELETE_FORM
via the single test of transaction SE37. But in this case you have to
delete this form in all systems.
Regards,
David

Function modules for deleting photos in archive

Hi all,
I got the requirement to delete the photos which was uploaded through archive link (OAAD).
Could I know which function modules should I use to delete the link as well as document?
When I searched in forums I found some function modules:
ARCHIVE_OBJECT_DELETE
HRXSS_COD_DELETE_OLDPHOTO
But these function modules doesnot exists in my client.
Could you suggest me some other function modules with parametrs passing.
Also explain me how to pass parameters for SCMS_DOC_DELETE function module.Is this helpful for deleting of photos?
Thanks in advance.

Hi Harika,
you could try using the FM ARCHIV_DELETE_META.
Also, the FM HRXSS_COD_DELETE_OLDPHOTO appears to have been create for this purpose of deleting employee photos; and only requires the personnel number to be entered.
KR,
Karen.

Function Module to delete System History

Hello All
Is there any function module available to delete the system History? The necessity of this is ...
1. Enter MIRO transaction
2. First screen asks for the Company Code
3. Second screen will ask for the details like Invoice date , reference and so and so ...
Now open another session of MIRO ,
1. The system directly goes to the second screen where it asks for invoice dates and other details...It is taking the previous session's company code for this session also.
I would like to avoid this company code and I want the same screen for all the time. This would make my ecatt script to run successfully.
Kindly advise.
Thanks
Tharani

That will not work Tharani. I am sorry, but I think there is an alternative.
Execute MIRO manually first. This should ask you for company code. Enter something, go into next screen, and then cancel and come out of it. What this does is it sets the parameter id for company code.
Now do your ECATT for MIRO. It should not ask you for company code this time, because it reads it from the memory. In the next screen (initial screen for entering the invoice data) 'Menu>Edit>Switch Company Code' and change the company code to a new one. This way every transaction of yours will go through this switch company code screen, even if it is the same company code.
Let us know if it works.
Srinivas

Function module to delete a user

Similar Messages

Maybe you are looking for