Function module to get admin within personnel area

Hi,
are there any function module to get admin for certain personnel area?
i want to used it in workflow,
to make rule agents for employee within personnel number "A", this workflow will go to admin for personnel area "A"
thanks

OK, here's the case.
in our company, we assign people to be the administrator.
each personnel area has administrator.
for example
- PERNER 34010-34050 are in personnel area 4700, with the administrator is user ABC
- PERNER 34051-34100 are in personnel area 4800, with the administrator is user EFG
so, when employee with personnel number 34010 create travel request, i want the workflow to send notification to admin/user ABC to either approve or reject the request.
how to do this?
thanks
Edited by: nzworld on Aug 10, 2010 4:30 AM

Similar Messages

  • Function module for getting Vendor Address details

    Hi,
    Im new to this group,and new to ABAP
    plz hep me out by solving ABAP Query...
    i want to generate a report for getting Vendor Details
    like Vendor address,Ph num and Email
    input fields are Company code,country key and Account Group.
    im Using Smart Forms for this..
    but im not getting the Exact Function module to get All Required Details..
    regards
    Smitha

    thanks for ur quick reply...
    SELECT SINGLE LIFNR
      FROM LFB1
      INTO V_LIFNR
      WHERE BUKRS EQ V_BUKRS.
      CALL FUNCTION 'VENDOR_READ'
        EXPORTING
          i_bukrs         = V_BUKRS
          i_lifnr         = V_LIFNR
        EXCEPTIONS
         NOT_FOUND       = 1
         OTHERS          = 2
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    this is the code i have written...
    but my problem is there no table in the Function module....
    for Example...
    CALL FUNCTION 'QPAX_PLMKB_READ_FROM_PLKO'
        EXPORTING
          i_plnty            = 'Q'
          i_plnnr            = V_PLNNR
          I_PLNAL            = V_PLNAL
          i_sttag            = V_DATUV
       TABLES
        T_PLMKB_TAB        = IT_TAB
    i want the function modules with tables and proper input...

  • Function  module to get pernt by passinf objid and otype

    Hi,
    Help me to find any function module to get pernr by using objid and otype.or table name from which we can get pernr by passing objid and otype.
    thanks,
    satish.

    You are talking about on the OM side and obtain the perner via object P?
    You can through a few method. One is using evaluation path. There is a function module called HR_STRUC_GET which allow you to pass evaluation path to get the result.
    Using that, you could create a simple evaluation path from position (object s) to person (object p). The object ID of object P is your pernr.
    Unless you have central person functionality, that might no longer be the case.

  • Function module to get BOM which WOULD be created if I open a production

    Is there a function module to get the BOM which WOULD be created if I open a production order?
    note that I don't have the produciton order created.
    I already tried with the FM CS_BOM_EXPL_MAT_V2 and CSAP_MAT_BOM_READ.
    I debuged the CO01, but I did not find it.
    This BOM should include materials which are under a phantom component.
    Edited by: Rodrigo Pelos on Jul 20, 2011 6:55 PM

    Hi Greetson Shunmugasundaram,
    thanks for the reply, but for the FMs CO_SD_RESB_FROM_BOM_CREATE and CO_SD_NEW_BOM_ASSIGNEMENT it's necessay to have an production order but I don't have it. And with CS_ALT_SELECT_COUPLED_PRODUCT I could not get a BOM.
    Let me explain in more details how I'm going to use this information, I think I was not clear in my post.
    I'm creating a report to compare the BOM of a production order with BOM which would be created today if I open a production order.
    Then I can check if there was changes in the reservation (RESB) of the production order. If this changes happened, how many pieces. I'll check also if there was differences in consumption, because during the production order confirmation it is possible to make changes.
    I would not like to make the BOM explosion "manually" because there are too many variables in the BOM like phantom, alternative, scrap and so on, but I don't know if the function module that I'd like to use exists.

  • BAPI function module to get condition type and its values based on delivery number?

    Hi All,
    I would like to have the BAPI function module to get condition type value based on delivery number before invoice is created.please provide detail program for as a reference .please reply as soon as possible its urgent.
    Regards,
    saaikumar.

    If you haven't already, you may first need to search via the SAP transaction "BAPI" in the area this is applicable to.  Failing that I do hope you get an answer.

  • Function module to get md04 data

    I need function module to get below data of the material as per the mrp area.
    Thanks,
    Kiran

    Hello Kiran and Kumar
    As I have explained in the following thread, BAPI_MATERIAL_STOCK_REQ_LIST should be used instead of MD_STOCK_REQUIREMENTS_LIST_API.
    Material shortage report after mrp run.
    BR
    Caetano

  • Function module to get the difference of dates ..

    Hi ,
    Can somebody pls help me with the function module to get the difference between two dates?
    I need to find the difference value and delete records if >1.
    Thanks in advance.
    Regds,
    Leeza.

    Leeza,
       When I tested the FM in my Program, it is <b>working</b>!!!!!
       Note that the Two Input Dates are to be in the format of <b>DATS</b> type (Eg: <b>vimimv-dmibeg</b>).
      U can want the Day which u have specified in the parameter I_DATUM_BIS (eg: 20050101) to be included for
    the calculation , then put X in the parameter I_KZ_INCL_BIS.
    Sample Code :
    report zkam01.
    data:           
    <b>sav_nlaufz like rf60v-nlaufz, 
    date1 type vimimv-dmibeg,
    date2 type vimimv-dmiend.</b>
    date1 = '20050101'.
    date2 = '20051001'.
    call function 'MONTHS_BETWEEN_TWO_DATES'
         exporting
             i_datum_von   = date1
             i_datum_bis   = date2
             i_kz_incl_bis = 'X'
         importing
             e_monate      = sav_nlaufz.
    write:
    date1,
    / date2,
    / sav_nlaufz.
    Please allot points if the problem is solved.
    Thanks
    Kam
    Message was edited by: Kam

  • Function module to get the BOM details for a material-plant combination

    hi
    Is there any function module to get the BOM details such as
            BOM Usage       -STLAN
            Alternative BOM -STLAL
            Items                -POSNR
            Required Quantity-EMENG
            Resulting Quantity-MENGE
            Unit of measure    -BMEIN
            Base unit of measure-MEINS
    for a given material-plant combination
    if so please suggest me some FMs.................
    Awaiting for ur reply..............

    try the below fm it may be useful for you
    DATA : BEGIN OF I_BOM OCCURS 0.
            INCLUDE STRUCTURE STPOX.
    DATA : END OF I_BOM.
    CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
        EXPORTING
          CAPID                 = 'PP01'
          DATUV                 = SY-DATUM
          MEHRS                 = 'X'
          MTNRV                 = P_MATNR
          WERKS                 = P_WERKS
        TABLES
          STB                   = I_BOM
        EXCEPTIONS
          ALT_NOT_FOUND         = 1
          CALL_INVALID          = 2
          MATERIAL_NOT_FOUND    = 3
          MISSING_AUTHORIZATION = 4
          NO_BOM_FOUND          = 5
          NO_PLANT_DATA         = 6
          NO_SUITABLE_BOM_FOUND = 7
          CONVERSION_ERROR      = 8
          OTHERS                = 9.
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    just befor use it check your application area.for my case it is PP01. you can find it in CS12 when you are exploding the bom the value you are giving in BOM application that is the value for CAPID.
    Just go to se37 and checkout the fm it has lot of options here I am using the minimum things.
    regards
    shiba dutta

  • Function Module Not Getting Activated

    Hi,
    We are using a customised function module which we are calling in a user exit. We would like to call this function module in update task in the user exit to populate data in a custom table.
    We have given the following parameters to the function module
    Import Parameters
    ITAB     LIKE     ZPRUNDAT
    Export Parameters
    l_subrc     TYPE     sy-subrc
    On the attributes tab of the function module, Update Module has been selected under processing type.
    When we try to activate this function module we get the following message
    EXPORTING parameters are not allowed in the update task.
    and the function module does not get activated. What should we change to get the function module activated?
    Mick

    Hi,
    Please try this....
    In function module
    In tables Section add this...
    RETURN TYPE BAPIRET2 and then activate.
    if its useful reward points

  • Any function module to get all items in SAP INBOX

    hi All
    I am trying to get all the items in my SAP Inbox via rfc.
    Can anyone help me with any function module to get all items in SAP INBOX.
    Thanks

    Hi Mukesh,
    Step 1. Use FM SO_USER_READ_API1 to get the folder details of the user
    Step 2. Use FM SO_FOLDER_READ_API1 of the respective folder. You can read the Inbox, Workflow Inbox depending on what folder you read. The function modules are documented well as well with examples.
    Hope this will  help u,
    Thanks & Regards
    Kiran

  • Function module for getting the open qty

    HI experts,
                      I have a PO quantity(EKPO_MENGE).against same PO and item item(EBELN and EBELP) if Goods receipt has happened (MSEG_ERFMG) then i need to calculate the open qty.and also by netting the open quantity if multiple GRs has done against the same PO and item.
    Can you suggest any function module to get this open PO quantity.

    Hello,
    Hope this link can help you.
    [Po Open Quantity;
    Thanks
    Jayant

  • ABAP - Function module to get the number of working days between 2 days

    Hi gentlemen,
    I have been asked to produce a report that gives the number of working days between 2 days, based on a calendar.
    I didn't find anything...
    Has any of you already written a function module to get this ?
    A great thanks in advance.
    Jacques Lagrif

    Hi ,
    you can try this ,
    when you require the number of working days between D1 and D2
    Total No of Days will be
    D2 - D1
    No of holidays between D1 and D2 , use the FM HOLIDAY_GET
    Pass the From date , to date , and the factory calendar to get the of Holidays
    Total no of days - Number of Holidays will your Working days
    Regards,
    Sathya

  • Function Module to get the Screen

    Hello All,
    Can anybody provide me a Function Module to get the Screen by giving Program Name and Screen Number.
    Thanks,

    Hello
      check FM  RS_IMPORT_DYNPRO
       CALL FUNCTION 'RS_IMPORT_DYNPRO'
          EXPORTING
            dylang = pmlang
            dyname = programname
            dynumb = screen
          IMPORTING
            header = header
          TABLES
            ftab   = ifields
            pltab  = iflowlogic.
    or you have to create join b/w table reposrc and tadir .
    Thanks
    Anirudh

  • Function module to get the details (WTGBTR) from table COEP

    Hi all,
    I have to select the data from COEP table based on OBJNR, KSTAR and KOKRS.I want  WTGBTR from COEP Table.
    Right now Iam using select query.But i want to use function module.
    Can any one please tell me is there any function module to get  WTGBTR from COEP table.
    Thanks.

    This'll work:
    SELECT objnr bukrs wtgbtr
      INTO CORRESPONDING FIELDS OF TABLE gt_coep
      FROM coep
      WHERE lednr = '00'                               "<========
        and kokrs = '1000'
        AND kstar IN ('0000810001' , '0000830001')
        AND objnr IN s_objnr
        AND bukrs IN s_bukrs.
    Rob

  • Function module to get table description

    Is there any function module to get table description on passing table name

    Hi,
    We need to use : 'G_RW_TABLE_DESCRIPTION_GET' function module.
    we pass the table name and the language.
    call function 'G_RW_TABLE_DESCRIPTION_GET'
        exporting
          rw_table = p_table
          langu    = sy-langu
        importing
          tab_text = l_tabtext
        exceptions
          others   = 1.
    thanx.

Maybe you are looking for

  • IBase : CRM_IBASE_COMP_CREATE

    Hello, I am currently creating a new interface between our AS/400 legacy system and crm 2007. To do that, i am using the following fm like CRM_IBASE_INITIALIZE, CRM_IBASE_CREATE, etc.. The problem is that i need to add a component into an exisiting i

  • To create Trunk Group with differnt T1 PRI's groups for our outbound calls

    Hi All, I would like to request all of you that I have requiremnt that we have to create "Trunk Group"  of diffenent T1 controller PRI's for outbonds call, mean I need to create a trunk group with differnt T1 PRI's groups for our outbond  calls,  but

  • Digital signature dictating where data is input

    The form I have is a government form that has varouis areas to sign. Here is the sceanrio: Evaluation type A Evaluation type B I have a main menu that is centralized that populates data for the entire form (alot of the data on these forms is repetati

  • How to separate joint Apple ID's account using different mails and passwords

    How to separate joint Apple ID's account using different mails and passwords

  • Middle of download

    i am trying to download yahoo messenger beta. in the middle of the downloading process the screen suddenly appears gray with a note that i needed to restart my powerbookG4. so i did press the start button since that gray screen freezes everything. th