Function module to get the details from table COEP

hi all,
I have to select the data from COEP table based on OBJNR.i don't have any other key information.so i have to select the data based on OBJNR only.
can any one please tell me is there any function to get the data from this table.
Thanks.

Hi
Try the fun module
K_CO_OBJECT_BALANCE_GET
see the sample select statement for COEP
clear cobrb_tab.
refresh cobrb_tab.
select objnr            " Object No
         rec_objnr1       " Ref Object No
         bureg            " Dostribution Rule
         lfdnr            " Sequence No
         perbz            " Settlement Rule
         konty            " Acct Assign Category
         bukrs            " Company Code
         kostl            " Cost Center
     into table cobrb_tab
     from cobrb
     where kostl in rn_kostl.
sort cobrb_tab by objnr rec_objnr1.
delete adjacent duplicates from cobrb_tab comparing objnr.
Get the Settlement Costs from COEP Table
clear it_set_tab.
refresh it_set_tab.
if not cobrb_tab[] is initial.
    select kokrs            " Controlling Area
           belnr            " Acc Document
           buzei            " Line Item
           perio            " Period Block
           wkgbtr           " Value in CO Curr
           lednr            " Ledger No
           objnr            " Object No
           gjahr            " Fiscal Year
           wrttp            " Actuals
           versn            " Version
           kstar            " Cost Element
           beknz            " Dr/Cr Indicator
           parob1           " Partner Object
       into table it_set_tab
       from coep
       for all entries in cobrb_tab
       where lednr = c_lednr and
             wrttp = c_wrttp2 and
             versn = c_versn and
             gjahr = p_gjahr and
             objnr = cobrb_tab-objnr and
             parob1 = cobrb_tab-rec_objnr1 and
             beknz in (c_o, c_a).
endif.
Reward points for useful Answers
Regards
Anji

Similar Messages

Function module to get the dates from the year and the period

Is there a function Module to get the dates from the year and the period

Check with :
To get last day of period use .
LAST_DAY_IN_PERIOD_GET.
To get last of month Use :
RE_LAST_DAY_OF_MONTH
HRVE_LAST_DAY_OF_MONTH
LAST_DAY_OF_MONTHS
ISB_PREVIOUS_PERIOD_DATE_GET
Thanks
Seshu

Function module to get the details (WTGBTR) from table COEP

Hi all,
I have to select the data from COEP table based on OBJNR, KSTAR and KOKRS.I want WTGBTR from COEP Table.
Right now Iam using select query.But i want to use function module.
Can any one please tell me is there any function module to get WTGBTR from COEP table.
Thanks.

This'll work:
SELECT objnr bukrs wtgbtr
INTO CORRESPONDING FIELDS OF TABLE gt_coep
FROM coep
WHERE lednr = '00'                               "<========
    and kokrs = '1000'
    AND kstar IN ('0000810001' , '0000830001')
    AND objnr IN s_objnr
    AND bukrs IN s_bukrs.
Rob

Functional module to get the File from a given Directory

Hi all,
I am using a FM name 'subst_get_file_list' to get the file from a given directory but it is accepting only 40 Character length file only my requirement is to accept file name other than 40 char,
give me good sugestion
regards
paul

Hi Paul,
Check the Function Module Gayathri has given. ie. 'SO_SPLIT_FILE_AND_PATH'.
In the exporting parameter FULL_NAME , give the path name and in the importing parameter stripped_name , you will get the filename.
Check this code.
REPORT ZSHAIL_SPLITFILE.
data: it_tab type filetable with header line,
      gd_subrc type i.
tables: rlgrap.
data: path type string,
      file_name type string.
parameters file_nam type rlgrap-filename .
data: user_act type i.
at selection-screen on value-request for file_nam.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
EXPORTING
    WINDOW_TITLE            = 'select a file'
   DEFAULT_EXTENSION       = '*.txt
    DEFAULT_FILENAME        = ''
    FILE_FILTER             = '*.txt'
    INITIAL_DIRECTORY       = ''
    MULTISELECTION          = abap_false
   WITH_ENCODING           =
CHANGING
    file_table              = it_tab[]
    rc                      = gd_subrc
    USER_ACTION             = user_act
   FILE_ENCODING           =
EXCEPTIONS
    FILE_OPEN_DIALOG_FAILED = 1
    CNTL_ERROR              = 2
    ERROR_NO_GUI            = 3
    NOT_SUPPORTED_BY_GUI    = 4
    others                  = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
if user_act = '0'.
loop at it_tab.
file_nam = it_tab-filename.
endloop.
endif.
path = file_nam.
CALL FUNCTION 'SO_SPLIT_FILE_AND_PATH'
EXPORTING
    full_name           = path
IMPORTING
   STRIPPED_NAME       = file_name
FILE_PATH           =
EXCEPTIONS
X_ERROR             = 1
OTHERS              = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
at selection-screen.
message i001(zmess) with file_name.
Regards,
SP.

Function Module to get hierarchy details from a customer account

Hi Experts,
There is certain hierarchy maintained among Business partners. We can see that in transaction BPH.
Now What I require is a function module which takes BP number as input and gives output the
BP number of child nodes of it . Is there a standard function module for it ?
Please help me move ahead.
Thanks in advance

Hi ram.mahaseth ,
There are several tables:
BUT_HIER_NODE
BUT_HIER_NODE_BP
BUT_HIER_NODE_D
BUT_HIER_STRUCT
BUT_HIER_TREE_D
BUT_HIER_TREE
Hope this helps.
Regards, Kostya Khveshchenik

Is there any function module to get the data from st06?

Hi,
I'm new to this forum.
I would like to know if there is a way (maybe some function modules) to collect information like system architecture, and databases as displayed in transaction st06?
I would like to call it from external program in order to view part of the data available in st06.
Thanks,
Erez Gordon.

have a look at function group SMON.
Not sure if these are remote enabled, otherwise create a wrapper function module (RFC).
Edited by: Micky Oestreich on Dec 11, 2008 9:37 AM

Urgent: Function module for getting the input from user using a pop up

Hi all,
My requirement at user commmand a pop up should appear asking the user to enter the session name for the bdc session to be created.
My report allows the user to enter the session name of his choice.
I need the name of the function module which can do this.
Thanks
Pritish

better to create one FM to pop-up.
check this :
function y_pop_up_get_distributor_time.
*"*"Local interface:
*" IMPORTING
*"     REFERENCE(W_ROUTE) LIKE VBAP-ROUTE
*"     REFERENCE(W_VBELN) LIKE VBAK-VBELN
*"     REFERENCE(W_VGBEL) LIKE VBAK-VGBEL
*"     REFERENCE(W_VSTEL) LIKE VBRP-VSTEL
*"     REFERENCE(W_AUART) LIKE VBAK-AUART
*" EXPORTING
*"     REFERENCE(W_FROM_DATE) TYPE SY-DATUM
*"     REFERENCE(W_FROM_TIME) TYPE SY-UZEIT
*"     REFERENCE(W_TO_DATE) TYPE SY-DATUM
*"     REFERENCE(W_TO_TIME) TYPE SY-UZEIT
*"     REFERENCE(W_TKNUM) TYPE VTTK-TKNUM
*"     REFERENCE(W_RC) TYPE SY-SUBRC
*"     REFERENCE(W_DEPT_DATE) TYPE SY-DATUM
*"     REFERENCE(W_DEPT_TIME) TYPE SY-UZEIT
*"     REFERENCE(W_REPO_DATE) TYPE SY-DATUM
*"     REFERENCE(W_REPO_TIME) TYPE SY-UZEIT
*"     REFERENCE(W_PLNT_DATE) TYPE SY-DATUM
*"     REFERENCE(W_PLNT_TIME) TYPE SY-UZEIT
*"     REFERENCE(W_TRUCK_NO) TYPE YW2_TIMEENTRY-TRUCKNO
*"     REFERENCE(W_LIFNRN) TYPE YW2_TIMEENTRY-LIFNR
* SET PF-STATUS 'STATUS_100' OF PROGRAM SAPLZ2SLS.
*CLEAR:W_DATE_FROM, W_DS_TIME_1, W_ADATE,
*      W_ATIME,W_BDATE,W_BTIME, W_CDATE, W_CTIME.
clear : w_route1, w_vbeln1,w_vgbel1,
        w_vstel1,w_auart1.
w_route1 = w_route.
w_vbeln1 = w_vbeln.
w_vgbel1 = w_vgbel.
w_vstel1 = w_vstel.
w_auart1 = w_auart.
clear: w_date_to, w_date_from, w_adate,w_atime,
         w_ds_time_1, w_ds_time_2,
         w_bdate, w_btime, w_cdate, w_ctime.
call screen 100 starting at 10 2 ending at 115 13.
if w_ok_code = 'SAVE'.
    w_rc = 0.
    w_from_date = w_date_from.
    w_from_time = w_ds_time_1.
    w_to_date    = w_date_to.
    w_to_time    = w_ds_time_2.
    w_tknum      = w_tknum.
    w_dept_date = w_adate.
    w_dept_time = w_atime.
    w_repo_date = w_bdate.
    w_repo_time = w_btime.
    w_plnt_date = w_cdate.
    w_plnt_time = w_ctime.
    w_truck_no   = sg_truckno.
    w_lifnrn     = w_lifnr.
else.
    w_rc = 1.
endif.
* IF w_ok_code = 'CANC'.
*    W_rc = 1.
* ELSE.
*    W_rc = 0.
*    W_FROM_DATE = w_date_from.
*    W_FROM_TIME = w_ds_time_1.
*    W_TO_DATE    = w_date_to.
*    W_TO_TIME    = w_ds_time_2.
*    W_TKNUM      = W_TKNUM.
*    W_DEPT_DATE = W_ADATE.
*    W_DEPT_TIME = W_ATIME.
*    W_REPO_DATE = W_BDATE.
*    W_REPO_TIME = W_BTIME.
*    W_PLNT_DATE = W_CDATE.
*    W_PLNT_TIME = W_CTIME.
* ENDIF.
clear w_ok_code.
endfunction.
Regards
Prabhu

Function Module to get the data like in LS26

Hi Gurus,
We are designing a new program and we need to get information about the "available stock", "putaway stock" and "pick quantity" for some storage types. So this is exactly what the LS26 shows.
Do you know any Function Module that can extract or calculate this information?
I would really appreciate any suggestion.
Thank you in advance
Edited by: Abel Raya on Jul 4, 2011 11:39 AM

I don't think there is a function module exists. But you can get the details from table LQUA for item details and LEIN for header records.

Any Function Module For getting Shipment Details

Hi All,
I want to get all details of shipment. i tired , but unable to get any function? I was able to find the creation or change shipment function modules, but not able to find the function module for getting the details for Shipment.
like BAPI_SHIPMENT_CHANGE Change Shipment
BAPI_SHIPMENT_CREATE Create Shipment
similary
Do you have any idea for getting (display)the details of Shipments?
Regards,
Raju

hi,
you can use
VTTP,VTTK
or
RV_SHIPMENT_READ

Function module to get the BOM details for a material-plant combination

hi
Is there any function module to get the BOM details such as
        BOM Usage       -STLAN
        Alternative BOM -STLAL
        Items                -POSNR
        Required Quantity-EMENG
        Resulting Quantity-MENGE
        Unit of measure    -BMEIN
        Base unit of measure-MEINS
for a given material-plant combination
if so please suggest me some FMs.................
Awaiting for ur reply..............

try the below fm it may be useful for you
DATA : BEGIN OF I_BOM OCCURS 0.
        INCLUDE STRUCTURE STPOX.
DATA : END OF I_BOM.
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
    EXPORTING
      CAPID                 = 'PP01'
      DATUV                 = SY-DATUM
      MEHRS                 = 'X'
      MTNRV                 = P_MATNR
      WERKS                 = P_WERKS
    TABLES
      STB                   = I_BOM
    EXCEPTIONS
      ALT_NOT_FOUND         = 1
      CALL_INVALID          = 2
      MATERIAL_NOT_FOUND    = 3
      MISSING_AUTHORIZATION = 4
      NO_BOM_FOUND          = 5
      NO_PLANT_DATA         = 6
      NO_SUITABLE_BOM_FOUND = 7
      CONVERSION_ERROR      = 8
      OTHERS                = 9.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
just befor use it check your application area.for my case it is PP01. you can find it in CS12 when you are exploding the bom the value you are giving in BOM application that is the value for CAPID.
Just go to se37 and checkout the fm it has lot of options here I am using the minimum things.
regards
shiba dutta

I need a Functional module to get the header material from the component .

Dear Guru's
Please help me .
I need a name of the Functional module to get the header material from the component .
As in if I put the Component in the Input I should get ALL the Main header materials using this Component.
Regards,
Roshan Lilaram Wadhwani.

This was not answered

Function Module to get the Screen

Hello All,
Can anybody provide me a Function Module to get the Screen by giving Program Name and Screen Number.
Thanks,

Hello
check FM RS_IMPORT_DYNPRO
   CALL FUNCTION 'RS_IMPORT_DYNPRO'
      EXPORTING
        dylang = pmlang
        dyname = programname
        dynumb = screen
      IMPORTING
        header = header
      TABLES
        ftab   = ifields
        pltab = iflowlogic.
or you have to create join b/w table reposrc and tadir .
Thanks
Anirudh

Is there any function module to get the variables used in a query?

Hi experts
Please, do you know if is there any function module to get the variables used in a query?
Thanks and regards
Luis

Hi Srini
Yes, I have checked the tables but I need a function module
Thanks anyway!
Luis

Function module to get the sequence numbers based on PERNR & payroll period

Hi,
    Right now i am using the function module 'CU_READ_RGDIR' to get the sequence number based on the PERNR. Once i get the data i am filtering based on payroll periods (begin date and end date). Is there any function module to get the sequence number directly based on PERNR and payroll period dates? if so could you let me know.
Thanks
Satya

I think thats the only way
CALL FUNCTION 'CU_READ_RGDIR'
    EXPORTING
      persnr          = p0001-pernr
    TABLES
      in_rgdir        = it_rgdir
    EXCEPTIONS
      no_record_found = 1
      OTHERS          = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
check whether "Pay date for payroll result" with in Start Date and
              End date, and "Reason for Off-Cycle Payroll" is initial
LOOP AT it_rgdir WHERE paydt >= v_begda
                         AND paydt <= v_endda AND
                         void IS INITIAL
                         AND ocrsn IS INITIAL
                         AND srtza = 'A'.
    v_seqnr = it_rgdir-seqnr.
ENDLOOP.
Hope this helps.
Thanks
Kiran

Function module to get the configuration of Individual objects

Hi all,
Is there is any std function module to get the data of individual object configuration.
In table COM_TA_R3_ID, I can able to get the PRODUCT_GUID (for material and serial number) and I dont know how to get the configuration of the product by using the PRODUCT_GUID.
Pl through some light on this.
Regards
A.Sureshbabu.

Hi,
You can get the item configuration using FM CRM_CONFIG_READ_OW.
This is used to read the product configurations for IPC calls.
Just pass the configured item guid and it will return the configuration data.
Use FM CRM_PRODUCT_I_READ_OW to get the product configurations but this FM checks whether any item has this product guid.
Regards,
Arun Kumar
Edited by: Arun Kumar on May 12, 2010 10:20 AM

Function module to get the details from table COEP

Similar Messages

Maybe you are looking for