Function module to get the valid Subcontract BOM and components for Pur doc
Hello Gurus,
I need help to create a z report of subcontracting bom and their components exploded in Schedule agreement. Seems like there is no standard report which can give the boms from purcashing doc. Can someone please tell me the name of the function module for it? any help will be highly appreciated.
Regards,
Owais
hi
u can use
STPO BOM - item
STAS BOMs - Item Selection
STZU Permanent BOM data
also check stko or mast or stpo
or
Perhaps you can run ST05 while run some transaction for display the
BOM.
Once the transaction for display the BOM gets finished, you need to stop the
trace on ST05 and then display it, you will see tables readden in the
transaction,
not tried plz check*
reward if helpful
regards
kunal
Edited by: kunal ingale on Jul 22, 2008 6:21 AM
Similar Messages
-
Function module to get the BOM details for a material-plant combination
hi
Is there any function module to get the BOM details such as
BOM Usage -STLAN
Alternative BOM -STLAL
Items -POSNR
Required Quantity-EMENG
Resulting Quantity-MENGE
Unit of measure -BMEIN
Base unit of measure-MEINS
for a given material-plant combination
if so please suggest me some FMs.................
Awaiting for ur reply..............try the below fm it may be useful for you
DATA : BEGIN OF I_BOM OCCURS 0.
INCLUDE STRUCTURE STPOX.
DATA : END OF I_BOM.
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
EXPORTING
CAPID = 'PP01'
DATUV = SY-DATUM
MEHRS = 'X'
MTNRV = P_MATNR
WERKS = P_WERKS
TABLES
STB = I_BOM
EXCEPTIONS
ALT_NOT_FOUND = 1
CALL_INVALID = 2
MATERIAL_NOT_FOUND = 3
MISSING_AUTHORIZATION = 4
NO_BOM_FOUND = 5
NO_PLANT_DATA = 6
NO_SUITABLE_BOM_FOUND = 7
CONVERSION_ERROR = 8
OTHERS = 9.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
just befor use it check your application area.for my case it is PP01. you can find it in CS12 when you are exploding the bom the value you are giving in BOM application that is the value for CAPID.
Just go to se37 and checkout the fm it has lot of options here I am using the minimum things.
regards
shiba dutta -
Function Module to get the Screen
Hello All,
Can anybody provide me a Function Module to get the Screen by giving Program Name and Screen Number.
Thanks,Hello
check FM RS_IMPORT_DYNPRO
CALL FUNCTION 'RS_IMPORT_DYNPRO'
EXPORTING
dylang = pmlang
dyname = programname
dynumb = screen
IMPORTING
header = header
TABLES
ftab = ifields
pltab = iflowlogic.
or you have to create join b/w table reposrc and tadir .
Thanks
Anirudh -
Is there any function module to get the variables used in a query?
Hi experts
Please, do you know if is there any function module to get the variables used in a query?
Thanks and regards
LuisHi Srini
Yes, I have checked the tables but I need a function module
Thanks anyway!
Luis -
Function Module to get the TIMESTAMP
Hi,
Is there any function module to get the TIMESTAMP as Outout , if i give input Time and Date.
Or,
If I go for the concatenate statement.. Do I need to concate the commas in to the target field?
Because,
I am not getting the proper result with this concatenate statement where I concatenated the YYYYMMDDHHMMSS in to the DECIMAL 15 Variable.
Thanks,
Naveen Inuganti.Hi use
IB_CONVERT_INTO_TIMESTAMP' or IB_CONVERT_FROM_TIMESTAMP'
Example:
* Declaring the work variables.......................
DATA :
timestamp like TZONREF-TSTAMPS,
time like sy-uzeit,
date like sy-datum.
* The following function module is used to convert the
* time and date into GMT timestamp
CALL FUNCTION 'IB_CONVERT_INTO_TIMESTAMP'
EXPORTING
i_datlo = sy-datum
i_timlo = sy-uzeit
I_TZONE = 'INDIA'
IMPORTING
E_TIMESTAMP = timestamp.
* The following function module is used to convert the
* above obtained timestamp to PST time zone date and time.
CALL FUNCTION 'IB_CONVERT_FROM_TIMESTAMP'
EXPORTING
i_timestamp = timestamp
I_TZONE = 'PST'
IMPORTING
E_DATLO = date
E_TIMLO = time.
write :/ 'Date and Time at PST zone is ',date, time. -
Function module to get the sequence numbers based on PERNR & payroll period
Hi,
Right now i am using the function module 'CU_READ_RGDIR' to get the sequence number based on the PERNR. Once i get the data i am filtering based on payroll periods (begin date and end date). Is there any function module to get the sequence number directly based on PERNR and payroll period dates? if so could you let me know.
Thanks
SatyaI think thats the only way
CALL FUNCTION 'CU_READ_RGDIR'
EXPORTING
persnr = p0001-pernr
TABLES
in_rgdir = it_rgdir
EXCEPTIONS
no_record_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
check whether "Pay date for payroll result" with in Start Date and
End date, and "Reason for Off-Cycle Payroll" is initial
LOOP AT it_rgdir WHERE paydt >= v_begda
AND paydt <= v_endda AND
void IS INITIAL
AND ocrsn IS INITIAL
AND srtza = 'A'.
v_seqnr = it_rgdir-seqnr.
ENDLOOP.
Hope this helps.
Thanks
Kiran -
Function module to get the posting period based on date
Hi to all,
Is there any function module to get the posting period based on date?
Regards,
Nageshhi,
CALL FUNCTION 'FIRST_DAY_IN_PERIOD_GET'
EXPORTING
I_GJAHR = GV_GJHAR
I_PERIV = GC_24
I_POPER = GV_POPER
IMPORTING
E_DATE = S_FKDAT-LOW
EXCEPTIONS
INPUT_FALSE = 1
T009_NOTFOUND = 2
T009B_NOTFOUND = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'LAST_DAY_IN_PERIOD_GET'
EXPORTING
I_GJAHR = GV_GJHAR
I_PERIV = GC_24
I_POPER = GV_POPER
IMPORTING
E_DATE = S_FKDAT-HIGH
EXCEPTIONS
INPUT_FALSE = 1
T009_NOTFOUND = 2
T009B_NOTFOUND = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ags. -
Function module to get the dates from the year and the period
Is there a function Module to get the dates from the year and the period
Check with :
To get last day of period use .
LAST_DAY_IN_PERIOD_GET.
To get last of month Use :
RE_LAST_DAY_OF_MONTH
HRVE_LAST_DAY_OF_MONTH
LAST_DAY_OF_MONTHS
ISB_PREVIOUS_PERIOD_DATE_GET
Thanks
Seshu -
Function module to get the wbs element by entering Assignment No.
Is there any Function module to get the wbs element by entering Assignment No.???????
Thanks and regards
Manish Thakurhi Manish,
Just look at this function module.
function wbs_assignment_check.
""Lokale Schnittstelle:
*" IMPORTING
*" REFERENCE(I_COMPONENT) LIKE RESBDGET STRUCTURE RESBDGET
*" REFERENCE(I_PSPEL) LIKE RESB-PSPEL
*" REFERENCE(I_RFPNT) LIKE AFVC-RFPNT
*" EXPORTING
*" REFERENCE(E_PSPEL) LIKE RESB-PSPEL
e_pspel = i_pspel.
endfunction.
hope this helps u
REWARD IF USEFUL
thanks and regards
suma sailaja -
Function module to get the configuration of Individual objects
Hi all,
Is there is any std function module to get the data of individual object configuration.
In table COM_TA_R3_ID, I can able to get the PRODUCT_GUID (for material and serial number) and I dont know how to get the configuration of the product by using the PRODUCT_GUID.
Pl through some light on this.
Regards
A.Sureshbabu.Hi,
You can get the item configuration using FM CRM_CONFIG_READ_OW.
This is used to read the product configurations for IPC calls.
Just pass the configured item guid and it will return the configuration data.
Use FM CRM_PRODUCT_I_READ_OW to get the product configurations but this FM checks whether any item has this product guid.
Regards,
Arun Kumar
Edited by: Arun Kumar on May 12, 2010 10:20 AM -
Function module to get the difference of dates ..
Hi ,
Can somebody pls help me with the function module to get the difference between two dates?
I need to find the difference value and delete records if >1.
Thanks in advance.
Regds,
Leeza.Leeza,
When I tested the FM in my Program, it is <b>working</b>!!!!!
Note that the Two Input Dates are to be in the format of <b>DATS</b> type (Eg: <b>vimimv-dmibeg</b>).
U can want the Day which u have specified in the parameter I_DATUM_BIS (eg: 20050101) to be included for
the calculation , then put X in the parameter I_KZ_INCL_BIS.
Sample Code :
report zkam01.
data:
<b>sav_nlaufz like rf60v-nlaufz,
date1 type vimimv-dmibeg,
date2 type vimimv-dmiend.</b>
date1 = '20050101'.
date2 = '20051001'.
call function 'MONTHS_BETWEEN_TWO_DATES'
exporting
i_datum_von = date1
i_datum_bis = date2
i_kz_incl_bis = 'X'
importing
e_monate = sav_nlaufz.
write:
date1,
/ date2,
/ sav_nlaufz.
Please allot points if the problem is solved.
Thanks
Kam
Message was edited by: Kam -
I need a Functional module to get the header material from the component .
Dear Guru's
Please help me .
I need a name of the Functional module to get the header material from the component .
As in if I put the Component in the Input I should get ALL the Main header materials using this Component.
Regards,
Roshan Lilaram Wadhwani.This was not answered
-
Function Module to get the Direct manager to an employee in a period?
Function Module to get the Direct manager to an employee in a period of time?
Hi,
try these FM
/MRSS/SQP_EMP_PROF_GET_API
/MRSS/SQP_EMP_PROF_GET_HISTORY
Thanks
Viquar Iqbal -
Function module to get pernt by passinf objid and otype
Hi,
Help me to find any function module to get pernr by using objid and otype.or table name from which we can get pernr by passing objid and otype.
thanks,
satish.You are talking about on the OM side and obtain the perner via object P?
You can through a few method. One is using evaluation path. There is a function module called HR_STRUC_GET which allow you to pass evaluation path to get the result.
Using that, you could create a simple evaluation path from position (object s) to person (object p). The object ID of object P is your pernr.
Unless you have central person functionality, that might no longer be the case. -
Hello! Tried unsuccessfully to restore my MBP, running the Mac OSX Lion, to factory settings. I keep getting the "can't download additional components for the Mac OSX Lion" error when reinstalling the OSX Lion. Any tips on how to resolve this problem?
Hi
Given that your answer to 1. is 'pre-installed' and 3. is 'No', I think the only thing to do is to take it to an Apple store (ideally the one you bought it from) and have them reinstall it for you.
The intended solution in cases like yours is that you should be able to reboot and install even a wiped disk by using Apple's servers over the internet (you do this by restarting with 'command-r' and choosing 'reinstall Lion'). However if this isn't working for you then you need to get the store to do it. Don't let them fob you off with 'go home and try again'. Have them do it in the shop (you're still covered by Applecare warranty so it should cost you nothing save the inconvenience of the trip and possibly leaving the machine there while they fix it).
A reinstall should leave all your own personal data and programs in place.
Note for future: when you get it fixed, first thing to do is buy a cheap external drive and start keeping a backup (either Time Machine or clone with Carbon Copy Cloner).
Message was edited by: softwater
Maybe you are looking for
-
Authenticated User not showing up in access log
Hello all, I am trying to get authenticated users to show up in the access log of SunOne Web Server 6.1 SP4 and it doesn't work. It is a default paramter to show up in the access log but doesn't show in the log. In fact, when I set the log to only sh
-
Hi ! My english aint good but will do my best to explain my question. In Garageband i start up with my digital piano connected to my Imac, of course select the piano ( Picture of a piano ) then it start up and make a track i can record on, then you g
-
I restored my Ipad 1 to factory settings, but now my pc windows cannot recognize it, even my itunes what should i do?
-
Ora-01219 database not open; only queries on fixed tables and views.
Hi everyone There is another post stating this error, but since the source is different, I think is okay to make a different post as well. Our database was working fine until the other day, when suddenly power went off, UPS was damaged and didn't hol
-
"In Review" app status 4 month - is this possible?
We have uploaded a total of 11 Apps so far. (First app posted 30 April 2010) There has been only one free App approved and being serviced by Apple. The other ten Apps are still being under review process. It has been almost four months of the review