Function Module to know the Acc doc no for a Material document.

Dear Friends,
What is the Function Module to know the Acc doc no for a Material document? Please help. Thanks in advance.
Regards,
RAMAN

Hi Raman,
I am not sure about your requirement,
But i remember when i required the same like you i went to vrpma table to get the account document,
I just did like a blind fold,
as my company does all the billing accounts in the same month, my search criteria was blind.
Also try with MKPF-XBLNR with the VBRK-XBLNR and get VBRK-VBELN
from there goto BSEG.
Thansk & regards,
Dileep .C

Similar Messages

Function module to read the the idoc

Hi abap gurus,
   I have an inbound idoc coming form a wms system .The IDOC is for goods recieved . how can I read the idoc to update the inbound delivery data in the sap system ? Is there any function module to read the data from teh inbound idoc ?

Hi Gaurab,
Creating a Function Module (Direct Inbound Processing)
This step describes how to create a function module which is identified by the IDoc Interface using a new process code and called from ALE (field TBD52-FUNCNAME). Direct inbound processing using a function module (not using a workflow) always includes the ALE layer. This setting (processing with function module and ALE layer) is identified by the value 6 in the field TEDE2-EDIVRS, which is read by the function module IDOC_START_INBOUND. IDOC_START_INBOUND then calls ALE.
Prerequisites
You must have completed the required steps in Defining and Using a Basic Type .
Procedure
Choose Tools ® ABAP Workbench ® Development ® Function Builder, and create a new function module.
Create the segments as global data in your function group. The function module should copy the application data from the segments into the corresponding application tables and modify the IDoc status accordingly. If an error occurs, the function module must set the corresponding workflow parameters for exception handling.
Activate the function module: From the initial screen of the Function Builder select .
In the example, create the function module IDOC_INPUT_TESTER with a global interface. The function module is called when an IDoc of type TESTER01 is received for inbound processing. You will assign an application object ("standard order") to this IDoc type and therefore maintain tables from SD. To do this, call transaction VA01 using the command CALL TRANSACTION. Please note that the intention here is not to simulate a realistic standard order, but only to illustrate how data reaches application tables from an IDoc table via segment structures (form routine READ_IDOC_TESTER) and how the function module triggers an event for exception handling (by returning suitable return variables to the ALE layer in the FORM routine RETURN_VARIABLES_FILL).
A comprehensive example of the code for an inbound function module is provided in the ALE documentation in the SAP Library under Example Program to Generate an IDoc. This function module, for example, also checks whether the logical message is correct and calls a (fictitious) second function module which first writes the application data and then returns the number of the generated document. In addition, status 53 is only set if the application document was posted correctly.
Administration parameters for IDOC_INPUT_TESTER
Application abbreviation
V (Sales and Distribution)
Processing type
Normal, start immediately
Interface for IDOC_INPUT_TESTER (global interface)
Formal parameters
Reference structure
Explanation
Import parameters
INPUT_METHOD
BDWFAP_PAR-INPUTMETHD
Describes how the function module is to be processed (example: in the background)
MASS_PROCESSING
BDWFAP_PAR-MASS_PROC
Mass inbound processing? (indicator)
Export parameters
WORKFLOW_RESULT
BDWFAP_PAR-RESULT
Set to 99999 if an event is to be triggered for error handling.
APPLICATION_VARIABLE
BDWFAP_PAR-APPL_VAR
Variable freely available from application for workflow
IN_UPDATE_TASK
BDWFAP_PAR-UPDATETASK
Asynchronous update? (indicator is not set in example)
CALL_TRANSACTION_DONE
BDWFAP_PAR-CALLTRANS
Transaction called? (indicator is not set in example)
Table
IDOC_CONTRL
EDIDC
IDoc control record
IDOC_DATA
EDIDD
IDoc data records
IDOC_STATUS
BDIDOCSTAT
IDoc status records for ALE
RETURN_VARIABLES
BDWFRETVAR
IDoc assigned to Object type method parameters.
SERIALIZATION_INFO
BDI_SER
If several IDocs are to be processed in a certain sequence: this structure contains the necessary information
Example
FUNCTION IDOC_INPUT_TESTER.
""Globale Schnittstelle:
*"       IMPORTING
*"             VALUE(INPUT_METHOD) LIKE BDWFAP_PAR-INPUTMETHD
*"             VALUE(MASS_PROCESSING) LIKE BDWFAP_PAR-MASS_PROC
*"       EXPORTING
*"             VALUE(WORKFLOW_RESULT) LIKE BDWFAP_PAR-RESULT
*"             VALUE(APPLICATION_VARIABLE) LIKE BDWFAP_PAR-APPL_VAR
*"             VALUE(IN_UPDATE_TASK) LIKE BDWFAP_PAR-UPDATETASK
*"             VALUE(CALL_TRANSACTION_DONE) LIKE BDWFAP_PAR-CALLTRANS
*"       TABLES
*"              IDOC_CONTRL STRUCTURE EDIDC OPTIONAL
*"              IDOC_DATA STRUCTURE EDIDD
*"              IDOC_STATUS STRUCTURE BDIDOCSTAT
*"              RETURN_VARIABLES STRUCTURE BDWFRETVAR
*"              SERIALIZATION_INFO STRUCTURE BDI_SER
initialize SET/GET Parameter and internal tables
PERFORM INITIALIZE_ORGANIZATIONAL_DATA.
Move IDOC to internal tables of application
PERFORM READ_IDOC_TESTER.
call transaction Order Entry VA01
PERFORM CALL_VA01_IDOC_ORDERS USING ERRORCODE.
set status value
perform write_status_record using errorcode.
return values of function module
PERFORM RETURN_VARIABLES_FILL USING ERRORCODE.
ENDFUNCTION.
FORM INITIALIZE_ORGANIZATIONAL_DATA.
initialize SET/GET parameters
   SET PARAMETER ID 'VKO' FIELD SPACE.
   SET PARAMETER ID 'VTW' FIELD SPACE.
   SET PARAMETER ID 'SPA' FIELD SPACE.
   SET PARAMETER ID 'VKB' FIELD SPACE.
   SET PARAMETER ID 'VKG' FIELD SPACE.
initialize internal tables
   REFRESH BDCDATA.
   CLEAR BDCDATA.
   CLEAR BELEGNUMMER.
   CLEAR ERRTAB.
   REFRESH ERRTAB.
   REFRESH XBDCMSGCOLL.
   CLEAR XBDCMSGCOLL.
ENDFORM.                    " INITIALIZE_ORGANIZATIONAL_DATA
FORM READ_IDOC_TESTER.
PERFORM INITIALIZE_IDOC.
LOOP AT IDOC_DATA
   WHERE DOCNUM = IDOC_CONTRL-DOCNUM.
    CASE IDOC_DATA-SEGNAM.
header data
      WHEN 'E1HEAD'.
        MOVE IDOC_DATA-SDATA TO E1HEAD.
        PERFORM PROCESS_SEGMENT_E1HEAD.
position data
      WHEN 'E1ITEM'.
        MOVE IDOC_DATA-SDATA TO E1ITEM.
        PERFORM PROCESS_SEGMENT_E1ITEM.
    ENDCASE.
ENDLOOP.
only when there were one or more items
CHECK FIRST NE 'X'.
APPEND XVBAP.                        "last one
ENDFORM.                    " READ_IDOC_TESTER
FORM INITIALIZE_IDOC.
CLEAR XVBAK.
REFRESH XVBAP.
CLEAR XVBAP.
POSNR = 0.
FIRST = 'X'.
ENDFORM.                    " INITIALIZE_IDOC
FORM PROCESS_SEGMENT_E1HEAD.
requested date of delivery
WLDAT = E1HEAD-WLDAT.
delivery date
XVBAK-BSTDK = E1HEAD-BSTDK.
customer number
XVBAK-KUNNR = E1HEAD-AUGEB.
order number
XVBAK-BSTNK = E1HEAD-BELNR.
division
XVBAK-SPART = E1HEAD-SPART.
distribution channel
XVBAK-VTWEG = E1HEAD-VTWEG.
sales organization
XVBAK-VKORG = E1HEAD-VKORG.
order type
XVBAK-AUART = E1HEAD-AUART.
do not fill incoterms (inco1, inco2)
customer function
CALL CUSTOMER-FUNCTION '001'
       EXPORTING
            PI_VBAK621           = XVBAK
       IMPORTING
            PE_VBAK621           = XVBAK
       TABLES
            PT_IDOC_DATA_RECORDS = IDOC_DATA.
ENDFORM.                    " PROCESS_SEGMENT_E1HEAD
FORM PROCESS_SEGMENT_E1ITEM.
position number
XVBAP-POSNR = XVBAP-POSNR + 1.
amount
XVBAP-WMENG = E1ITEM-MENGE.
unit
CALL FUNCTION 'ISO_TO_SAP_MEASURE_UNIT_CODE'
       EXPORTING
            ISO_CODE = E1ITEM-BMEINH
       IMPORTING
            SAP_CODE = XVBAP-VRKME
       EXCEPTIONS
            OTHERS    = 0.
material number
XVBAP-MATNR = E1ITEM-LMATNR.
CALL CUSTOMER-FUNCTION '002'
       EXPORTING
            PI_VBAP621           = XVBAP
       IMPORTING
            PE_VBAP621           = XVBAP
       TABLES
            PT_IDOC_DATA_RECORDS = IDOC_DATA.
APPEND XVBAP.
ENDFORM.                    " PROCESS_SEGMENT_E1ITEM
FORM CALL_VA01_IDOC_ORDERS USING ERRORCODE.
call transaction first dynpro
PERFORM DYNPRO_START.
call transaction double-line entry
PERFORM DYNPRO_DETAIL2.
incoterms
PERFORM DYNPRO_HEAD_300.
call transaction item datas
PERFORM DYNPRO_POSITION.
PERFORM DYNPRO_SET USING 'BDC_OKCODE' 'SICH'.
determine input method
IF INPUT_METHOD IS INITIAL.
    INPUT_METHOD = 'N'.
ENDIF.
call transaction VA01
CALL TRANSACTION 'VA01' USING    BDCDATA
                         MODE     INPUT_METHOD
                         UPDATE   'S'
                         MESSAGES INTO XBDCMSGCOLL.
errorcode = SY-SUBRC.       " remember returncode for status update
ENDFORM.                    " CALL_VA01_IDOC_ORDERS
form write_status_record using errorcode.
FILL IDOC_STATUS
IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
IF ERRORCODE = 0.
IDOC_STATUS-STATUS = BELEG_GEBUCHT. "value 53
   GET PARAMETER ID 'AUN' FIELD BELEGNUMMER.
   IDOC_STATUS-MSGID = 'V1'.
   IDOC_STATUS-MSGNO = '311'.
   IDOC_STATUS-MSGV1 = 'Terminauftrag'.
   IDOC_STATUS-MSGV2 = BELEGNUMMER.
ELSE.
    IDOC_STATUS-STATUS = BELEG_NICHT_GEBUCHT. "value 51
    IDOC_STATUS-MSGID = SY-MSwGID.
    IDOC_STATUS-MSGNO = SY-MSGNO.
    IDOC_STATUS-MSGV1 = SY-MSGV1.
    IDOC_STATUS-MSGV2 = SY-MSGV2.
    IDOC_STATUS-MSGV3 = SY-MSGV3.
    IDOC_STATUS-MSGV4 = SY-MSGV4.
ENDIF.
APPEND IDOC_STATUS.
ENDFORM.
FORM DYNPRO_START.
PERFORM DYNPRO_NEW USING PROGRAMM_AUFTRAG
                           DYNPRO-EINSTIEG
                  CHANGING LAST_DYNPRO.
ordertype
PERFORM DYNPRO_SET USING 'VBAK-AUART' XVBAK-AUART.
sales organization
PERFORM DYNPRO_SET USING 'VBAK-VKORG' XVBAK-VKORG.
Distribution channel
PERFORM DYNPRO_SET USING 'VBAK-VTWEG' XVBAK-VTWEG.
Division
PERFORM DYNPRO_SET USING 'VBAK-SPART' XVBAK-SPART.
Sales office
PERFORM DYNPRO_SET USING 'VBAK-VKBUR' XVBAK-VKBUR.
Sales group
PERFORM DYNPRO_SET USING 'VBAK-VKGRP' XVBAK-VKGRP.
ENDFORM.                    " DYNPRO_START
FORM DYNPRO_NEW USING    PROGNAME
                         DYNPRONR
                CHANGING LAST_DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGNAME.
BDCDATA-DYNPRO = DYNPRONR.
BDCDATA-DYNBEGIN   = 'X'.
APPEND BDCDATA.
LAST_DYNPRO = DYNPRONR.
ENDFORM.                    " DYNPRO_NEW
FORM DYNPRO_SET USING    FELDNAME
                         FELDINHALT.
CLEAR BDCDATA.
CHECK FELDINHALT NE SPACE.
dynpro field name
BDCDATA-FNAM = FELDNAME.
contents
BDCDATA-FVAL = FELDINHALT.
APPEND BDCDATA.
ENDFORM.                    " DYNPRO_SET
FORM DYNPRO_DETAIL2.
okcode
PERFORM DYNPRO_SET USING 'BDC_OKCODE' PANEL-UER2.
fix dynpro number 4001
PERFORM DYNPRO_NEW USING    PROGRAMM_AUFTRAG
                               '4001'
                      CHANGING LAST_DYNPRO.
order party
PERFORM DYNPRO_SET      USING 'KUAGV-KUNNR' XVBAK-KUNNR.
purchase order number
PERFORM DYNPRO_SET      USING 'VBKD-BSTKD'   XVBAK-BSTNK.
requested delivery date
PERFORM DYNPRO_DATE_SET USING 'VBKD-BSTDK'   XVBAK-BSTDK.
purchase order date
PERFORM DYNPRO_DATE_SET USING 'RV45A-KETDAT' WLDAT.
ENDFORM.                    " DYNPRO_DETAIL2
FORM DYNPRO_DATE_SET USING    FELDNAME
                              FELDINHALT.
DATA: DATE TYPE D.
CLEAR BDCDATA.
CHECK FELDINHALT NE SPACE.
BDCDATA-FNAM = FELDNAME.
WRITE FELDINHALT TO DATE.
BDCDATA-FVAL = DATE.
APPEND BDCDATA.
ENDFORM.                    " DYNPRO_DATE_SET
FORM DYNPRO_HEAD_300.
PERFORM DYNPRO_SET USING 'BDC_OKCODE' PANEL-KKAU.
incoterms part 1
IF NOT XVBAK-INCO1 IS INITIAL.
   PERFORM DYNPRO_SET USING 'VBKD-INCO1' XVBAK-INCO1.
ENDIF.
incoterms part 2
IF NOT XVBAK-INCO2 IS INITIAL.
   PERFORM DYNPRO_SET USING 'VBKD-INCO2' XVBAK-INCO2.
ENDIF.
PERFORM DYNPRO_SET USING 'BDC_OKCODE' 'BACK'.
ENDFORM.                    " DYNPRO_HEAD_300
FORM DYNPRO_POSITION.
LOOP AT XVBAP.
dynpro item double line entry
PERFORM DYNPRO_SET USING 'BDC_OKCODE' 'UER2'.
    IF XVBAP-POSNR = 1.
material number
      PERFORM DYNPRO_SET      USING 'VBAP-MATNR(01)'   XVBAP-MATNR.
order quantity
      PERFORM DYNPRO_SET      USING 'RV45A-KWMENG(01)' XVBAP-WMENG.
desired delivery date
      PERFORM DYNPRO_DATE_SET USING 'RV45A-ETDAT(1)' WLDAT.
sales unit
      PERFORM DYNPRO_SET      USING 'VBAP-VRKME(1)'   XVBAP-VRKME.
    ELSE.
     PERFORM DYNPRO_SET      USING 'BDC_OKCODE'      'POAN'.
material number
      PERFORM DYNPRO_SET      USING 'VBAP-MATNR(02)'    XVBAP-MATNR.
order quantity
      PERFORM DYNPRO_SET      USING 'RV45A-KWMENG(02)' XVBAP-WMENG.
desired delivery date
      PERFORM DYNPRO_DATE_SET USING 'RV45A-ETDAT(02)'   WLDAT.
sales unit
      PERFORM DYNPRO_SET      USING 'VBAP-VRKME(02)'    XVBAP-VRKME.
    ENDIF.
ENDLOOP.
ENDFORM.                    " DYNPRO_POSITION
FORM RETURN_VARIABLES_FILL USING ERRORCODE.
allocate IDOC numbers to Workflow output parameters
IF MASS_PROCESSING <> SPACE.
    IF ERRORCODE = 0.
      RETURN_VARIABLES-WF_PARAM = PID.
      RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
      APPEND RETURN_VARIABLES.
      RETURN_VARIABLES-WF_PARAM = APO.
      RETURN_VARIABLES-DOC_NUMBER = BELEGNUMMER.
      APPEND RETURN_VARIABLES.
      WORKFLOW_RESULT = C_WF_RESULT_OK.
    ELSE.
      RETURN_VARIABLES-WF_PARAM = EID.
      RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
      APPEND RETURN_VARIABLES.
      WORKFLOW_RESULT = C_WF_RESULT_ERROR.
    ENDIF.
ELSE.
    IF ERRORCODE = 0.
      RETURN_VARIABLES-WF_PARAM = APE.
      RETURN_VARIABLES-DOC_NUMBER = BELEGNUMMER.
      APPEND RETURN_VARIABLES.
      WORKFLOW_RESULT = C_WF_RESULT_OK.
    ELSE.
      WORKFLOW_RESULT = C_WF_RESULT_ERROR.
    ENDIF.
ENDIF.
ENDFORM.                    " RETURN_VARIABLES_FILL
Globale Daten von IDOC_INPUT_TESTER
TABLES: E1HEAD, E1ITEM.
DATA: BEGIN OF BDCDATA OCCURS 500.
        INCLUDE STRUCTURE BDCDATA.
DATA: END OF BDCDATA.
DATA: BEGIN OF XVBAK.                 "Kopfdaten
     INCLUDE STRUCTURE VBAK621.
DATA: END OF XVBAK.
DATA: BEGIN OF XVBAP OCCURS 50.        "Position
       INCLUDE STRUCTURE VBAP.
DATA: WMENG(18) TYPE C.
DATA: LFDAT LIKE VBAP-ABDAT.
DATA: KSCHL LIKE KOMV-KSCHL.
DATA: KBTRG(16) TYPE C.
DATA: KSCHL_NETWR LIKE KOMV-KSCHL.
DATA: KBTRG_NETWR(16) TYPE C.
DATA: INCO1 LIKE VBKD-INCO1.
DATA: INCO2 LIKE VBKD-INCO2.
DATA: YANTLF(1) TYPE C.
DATA: PRSDT LIKE VBKD-PRSDT.
DATA: HPRSFD LIKE TVAP-PRSFD.
DATA: END OF XVBAP.
DATA: BEGIN OF DYNPRO,
      EINSTIEG          LIKE T185V-DYNNR VALUE 101,
      KKAU              LIKE T185V-DYNNR,
      UER2              LIKE T185V-DYNNR,
      KBES              LIKE T185V-DYNNR,
      ERF1              LIKE T185V-DYNNR,
      PBES              LIKE T185V-DYNNR,
      PKAU              LIKE T185V-DYNNR,
      PEIN              LIKE T185V-DYNNR,
      EID1              LIKE T185V-DYNNR,
      POPO              LIKE T185V-DYNNR,
      EIPO              LIKE T185V-DYNNR,
      KPAR              LIKE T185V-DYNNR,
      PSDE              LIKE T185V-DYNNR,
      PPAR              LIKE T185V-DYNNR,
      KDE1              LIKE T185V-DYNNR,
      KDE2              LIKE T185V-DYNNR,
      PDE1              LIKE T185V-DYNNR,
      PDE2              LIKE T185V-DYNNR,
      PKON              LIKE T185V-DYNNR,
      END OF DYNPRO.
DATA: BEGIN OF PANEL,
      KKAU              LIKE T185V-PANEL VALUE 'KKAU',
      UER2              LIKE T185V-PANEL VALUE 'UER2',
      KBES              LIKE T185V-PANEL VALUE 'KBES',
      ERF1              LIKE T185V-PANEL VALUE 'ERF1',
      PBES              LIKE T185V-PANEL VALUE 'PBES',
      PKAU              LIKE T185V-PANEL VALUE 'PKAU',
      PEIN              LIKE T185V-PANEL VALUE 'PEIN',
      EID1              LIKE T185V-PANEL VALUE 'EID1',
      EIAN              LIKE T185V-PANEL VALUE 'EIAN',
      POPO              LIKE T185V-PANEL VALUE 'POPO',
      EIPO              LIKE T185V-PANEL VALUE 'EIPO',
      KPAR              LIKE T185V-PANEL VALUE 'KPAR',
      PSDE              LIKE T185V-PANEL VALUE 'PSDE',
      POAN              LIKE T185V-PANEL VALUE 'POAN',
      PPAR              LIKE T185V-PANEL VALUE 'PPAR',
      KDE1              LIKE T185V-PANEL VALUE 'KDE1',
      KDE2              LIKE T185V-PANEL VALUE 'KDE2',
      PDE1              LIKE T185V-PANEL VALUE 'PDE1',
      PDE2              LIKE T185V-PANEL VALUE 'PDE2',
      PKON              LIKE T185V-PANEL VALUE 'PKON',
      KOAN              LIKE T185V-PANEL VALUE 'KOAN',
      END OF PANEL.
DATA: BEGIN OF ERRTAB OCCURS 20,
       TRANS LIKE TSTC-TCODE,
       ARBGB LIKE T100-ARBGB,
       CLASS(1) TYPE C,
       MSGNR LIKE T100-MSGNR,
     TEXT LIKE T100-TEXT,
       TEXT(123) TYPE C,
       MSGV1 LIKE SY-MSGV1,
       MSGV2 LIKE SY-MSGV2,
       MSGV3 LIKE SY-MSGV3,
       MSGV4 LIKE SY-MSGV4,
      END OF ERRTAB.
*---- Hilfsfelder     -
DATA: PROGRAMM_AUFTRAG LIKE T185V-AGIDV VALUE 'SAPMV45A'.
DATA: LAST_DYNPRO      LIKE T185V-DYNNR,
      WLDAT            LIKE VBAK-BSTDK,
      POSNR            LIKE VBAP-POSNR,
      FIRST(1)         TYPE C VALUE 'X'.
DATA: BEGIN OF XBDCMSGCOLL OCCURS 10.
        INCLUDE STRUCTURE BDCMSGCOLL.
DATA: END OF XBDCMSGCOLL.
Terminauftrag ( Auftragsart wird fest gesetzt !)
DATA:   BELEGNUMMER LIKE VBAK-VBELN.
DATA:   ERRORCODE LIKE SY-SUBRC.
Statuswerte fuer IDOC-Status
DATA:   BELEG_NICHT_GEBUCHT LIKE TEDS1-STATUS VALUE '51'.
DATA:   BELEG_GEBUCHT       LIKE TEDS1-STATUS VALUE '53'.
*- Direktwerte für Return_variables -
data:
    eid like bdwfretvar-wf_param value 'Error_IDOCs',
    pid like bdwfretvar-wf_param value 'Processed_IDOCs',
    apo like bdwfretvar-wf_param value 'Appl_Objects',
    ape like bdwfretvar-wf_param value 'Appl_Object'.
*- Direktwerte für Workflow_Result -
DATA: C_WF_RESULT_ERROR LIKE BDWFAP_PAR-RESULT VALUE '99999'.
thanks
karthik
DATA: C_WF_RESULT_OK    LIKE BDWFAP_PAR-RESULT VALUE '0'.

Reg:function module to retrive the ekko table data

Hi all,
Is there any function module to retrive the ekko table data for the given select-options and parametrs.
could you provide that.
Thanks & regards,
S.chaitanya.

dear chaitanya,
may be you can use this function module ME_READ_EKKO_MULTIPLE which can be used to pass the select options to retrieve the desired EKKO data.
OR the best way would be to do a SELECT Query which would retrieve the data faster and in an effective manner.
Hope this helps you.
Help Children of U.N World Food Program by rewarding and enocourage others to answer your queries
Thanks
Venugopal

CRM function module to update the attribute in the classification TAB of BP

Hi All,
Can any body let me know if there is any functionmodule to update the CRM function module to update the attribute in the classification TAB of BP tcode.
I have searched a lot i get FM to update the marketing attribute and not the attributes in the classification tab.
Thanks in Advance
Edited by: Sharath Kumar on Dec 2, 2010 4:48 PM

For material bom: CSAP_MAT_BOM_CREATE
and CSAP_ORD_BOM_CREATE for Order BOM.
Regards,
Ravi

Function Module to determine the number of pages in a pdf file

Hi All,
Is there any standard function module to determine the number of pages in a pdf file?
Thanks,
Sai

Hi unk2,
There's no functionality in the Acrobat.com online services to do a character count. But, you could use ExportPDF to convert your PDF file to Word format, and then do your character count in Word.
Please let us know if you need additional assistance.
Best,
Sara

Function Module to change the master data attachments?

Dear Experts,
In SAP we can enclose the attachments for the Master data. Do we have any standard function module to change the Master data attachments.
Let me know if any?
Thanks and regards,
Reddy

Hi Reddy,
Please make use of function module :
BINARY_RELATION_CREATE_COMMIT
For detailed information on how to use the FM please see the thread below:
USE OF THIS fUNCTION MODULE
Regards,
Dilek A.

Is there any function module to get the variables used in a query?

Hi experts
Please, do you know if is there any function module to get the variables used in a query?
Thanks and regards
Luis

Hi Srini
Yes, I have checked the tables but I need a function module
Thanks anyway!
Luis

Function module to read the expired useful life of asset

Hi,
Is there a function module to read the expired useful life of asset. We are using the depriciation start date to calculate the expired useful life of asset, but the fiscal year shift and matching the calendar year with fiscal is causing the logic to give a month difference between the calculated value and the value in the asset.
Please let me know if there is a Function module or BAPI for getting the values. Kindly provide example for the function module call too.
Regards,
Prabaharan.G

Hi,
Check the following function modules.
AISC_CALC_EXPIRED_USEFUL_LIFE.
Check the following link it might be of some help to you.
Re: asset useful life
Regards,
Ram.

Function Module to find the Difference between two times.

Hi All,
Wud you plz let me know the Function Module to find the Difference between two times.
Input Time1( Hours:Minutes) Time2 ( Hours:Minutes)
Need Output in Hours:Minutes only . ( No seconds Needed )
Ex :
Input :
       06:00 to 18:00 Output : 12:00
and 20:00 to 06:00 Output: 10:00 with +ve sign only. No -ve sign.
Thanks,
N.L.Narayana

check this .
data : p_timel like sy-uzeit,
       p_timeh like sy-uzeit,
       diff like sy-uzeit,
       di(8) type c .
       p_timel = '200000'.
       p_timeh = '060000'.
       diff = p_timeh - p_timel.
       concatenate diff+0(2) ':' diff+2(2) into di.
       write:/ di.
also check for this.
       p_timel = '060000'.
       p_timeh = '180000'.
see if this can be implemented in ur code .
or else u can try with Fm L_TO_TIME_DIFF passing startdate enddate starttime endtime with UOM as MIN
hope this helps regards,
vijay

Function Module to find the Diff bt Two Times : O/p : Hours:Minutes only

Hi All,
Wud you plz let me know the Function Module to find the Difference between two times.
Input Time1( Hours:Minutes:Seconds) Time2 ( Hours:Minutes:Seconds)
Need Output in Hours:Minutes only . ( No seconds Needed )
Thanks,
N.L.Narayana

Hi
Please use FM
<b>SD_DATETIME_DIFFERENCE</b>

Function module to get the sequence numbers based on PERNR & payroll period

Hi,
    Right now i am using the function module 'CU_READ_RGDIR' to get the sequence number based on the PERNR. Once i get the data i am filtering based on payroll periods (begin date and end date). Is there any function module to get the sequence number directly based on PERNR and payroll period dates? if so could you let me know.
Thanks
Satya

I think thats the only way
CALL FUNCTION 'CU_READ_RGDIR'
    EXPORTING
      persnr          = p0001-pernr
    TABLES
      in_rgdir        = it_rgdir
    EXCEPTIONS
      no_record_found = 1
      OTHERS          = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
check whether "Pay date for payroll result" with in Start Date and
              End date, and "Reason for Off-Cycle Payroll" is initial
LOOP AT it_rgdir WHERE paydt >= v_begda
                         AND paydt <= v_endda AND
                         void IS INITIAL
                         AND ocrsn IS INITIAL
                         AND srtza = 'A'.
    v_seqnr = it_rgdir-seqnr.
ENDLOOP.
Hope this helps.
Thanks
Kiran

Function module to get the configuration of Individual objects

Hi all,
Is there is any std function module to get the data of individual object configuration.
In table COM_TA_R3_ID, I can able to get the PRODUCT_GUID (for material and serial number) and I dont know how to get the configuration of the product by using the PRODUCT_GUID.
Pl through some light on this.
Regards
A.Sureshbabu.

Hi,
You can get the item configuration using FM CRM_CONFIG_READ_OW.
This is used to read the product configurations for IPC calls.
Just pass the configured item guid and it will return the configuration data.
Use FM CRM_PRODUCT_I_READ_OW to get the product configurations but this FM checks whether any item has this product guid.
Regards,
Arun Kumar
Edited by: Arun Kumar on May 12, 2010 10:20 AM

How to debug a function module using in the generic datasource?

Hi all,
We have created a generic data source using function modulle and have been extracting the data for a single customer it contains single records but it has pulled out more than 10,000 records. how to debug the function module used in the data source.
since we schedule for extraction in bi and back ground job gets triggered in ecc for extraction,
i know in se37 we can select the function module name and then debug but still need to check while the bacground job is trigered through bi.
Thanks

Yes you can debug the Function Module.
Open the function module in SE37 and put a break point in the code where you want to check from, then come to RSA3 and give the datasource name and check the Debug check box on this screen, once you click on the start button it will take you the place where you have placed the break point in the FM, by pressing F5 you can see the flow of the FM.
Let me know whether this solves your issue.

Function Module to change the user status of a business transaction

Hi,
I want to change the user status of a business transaction. Plz let me know if there is a function module to change the user status.I found some FMs.
- CRM_STATUS_MAINTAIN_OW
- BBP_PROCDOC_STATUS_CHANGE_DIRE
- CRM_ORDER_CHANGE_STATUS
But these FM says that it has to be used for changing system status.
Thanx,
Sivagami.R

hi Siva,
here is some sample code :
data :
ip_guid            type crmt_object_guid,
ls_status            type crmt_status_com,
lt_status            type crmt_status_comt,
ls_input_field       type crmt_input_field,
ls_input_field_names type crmt_input_field_names,
lt_input_fields      type crmt_input_field_tab,
lt_obj_guids         type crmt_object_guid_tab,
ip_guid = <your guid>.
ls_status-ref_guid = IP_GUID.
ls_status-ref_kind = 'A'.
ls_status-status = lv_newstat.
ls_status-user_stat_proc = 'ZCRMCOM1'.
ls_status-activate   = 'X'.
INSERT ls_status INTO TABLE lt_status.
ls_input_field-ref_guid = IP_GUID.
ls_input_field-ref_kind = 'A'.
ls_input_field-objectname = 'STATUS'.
ls_input_field_names-fieldname = 'ACTIVATE'.
INSERT ls_input_field_names INTO TABLE ls_input_field-field_names.
INSERT ls_input_field INTO TABLE lt_input_fields.
ls_input_field_names-fieldname = 'STATUS'.
INSERT ls_input_field_names INTO TABLE ls_input_field-field_names.
INSERT ls_input_field INTO TABLE lt_input_fields.
insert IP_GUID into table lt_obj_guids.
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
EXPORTING
    it_status       = lt_status
CHANGING
    ct_input_fields = lt_input_fields.
CALL FUNCTION 'CRM_ORDER_SAVE'
EXPORTING
    it_objects_to_save = lt_obj_guids
EXCEPTIONS
    OTHERS              = 2.
COMMIT WORK.
please award points if helps
cheers

Function module to display the card details for the tcode BCA_CN_card_03

HI all,
I need to know the function modules to create the card data and also to display the card details in accounts management in CRM.
Points will be awarded.
Thanks and regards,
vinoth.

1 BUPA_ADDRESS_GET_DETAIL
2 BUPA_IDENTIFICATION_GET_DETAIL
BUPA_IDENTIFICATIONDETAILS_GET
3 BUPA_TAX*
4,5 BUPA_PCARD*

Function Module to know the Acc doc no for a Material document.

Similar Messages

Maybe you are looking for